Analog Devices

LTC1164CJ - Low-Power Quad Switched-Capacitor Filter | Analog Devices

MPN: LTC1164CJ ✓ Aktif
850 µA Vdss DIP Package 20 kHz Speed
MOQ: 1 |

LTC1164CJ Genel Bakış

The Analog Devices LTC1164CJ is a low-power, low-noise quad switched-capacitor universal filter containing four independent second-order filter building blocks, each operating over a 20 kHz cutoff range, in a 24-pin ceramic DIP package. Each building block typically consumes 850 µA, and the device supports dual supply voltages of ±3 V or ±5 V within an operating range of ±2.37 V to ±8 V.

A switched-capacitor active filter is an analog signal-processing IC that uses clocked internal capacitors and switches to implement frequency-selective behavior. In the signal-chain hierarchy, the LTC1164 belongs to the active-filter category, which sits within analog integrated circuits and signal-conditioning systems. Instead of requiring a separate resistor, capacitor, and op-amp network for each second-order section, it provides four programmable building blocks on one integrated circuit.

The four second-order sections can implement low-pass, high-pass, band-pass, band-stop, and notch responses through external resistor and capacitor selection. Low-noise operation makes the device useful when filtering small signals before amplification or digitization. Its low-power architecture is also appropriate for portable instrumentation, compact data-acquisition systems, audio test equipment, and embedded measurement products where four filter channels must be accommodated without using four separate discrete filter networks.

The internal switched-capacitor architecture provides the main functional benefit of accurate, repeatable filter behavior tied to external clock and component selections. The characteristic trade-off is that switched-capacitor filters introduce clock-related noise and require a clean clock signal. Component tolerances also determine how closely the implemented cutoff, gain, and response shape match their intended values, so resistor and capacitor selection remains an important part of the filter design.

LTC1164CJ applications include anti-alias filtering ahead of analog-to-digital converters, noise rejection in low-level sensor interfaces, audio and communication signal conditioning, laboratory measurement systems, and programmable industrial test equipment. The 24-pin ceramic DIP package supports through-hole PCB construction and legacy instrumentation platforms that require a conventional dual-in-line footprint.

When laying out a circuit using the LTC1164CJ, keep clock and sensitive filter-node traces away from switching power paths, use a low-noise ground strategy, and place external clock and timing components close to their associated pins. Verify the selected component tolerances against the required cutoff frequency and response shape rather than relying only on nominal values.

This product page combines package, function, filter-class, supply-range, and ordering information with practical selection guidance. It also distinguishes verified production and ordering facts from package details and application advice that must be confirmed against the manufacturer datasheet before a new design is released.

Drop-in alternatifler için LTC1164CJ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

LTC1164MJ

✅ Yerleştirme
📦 24-pin ceramic DIP
Military temperature grade replaces the CJ industrial grade; stated dual-supply range remains ±2.37 V to ±8 V

📋 Katalogda Olmayan Referans Alternatifi

LTC1164AMJ

✅ Yerleştirme
📦 24-pin ceramic DIP
Military temperature grade replaces the CJ industrial grade; stated dual-supply range remains ±2.37 V to ±8 V

📋 Katalogda Olmayan Referans Alternatifi

LTC1164CJ Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Quad universal switched-capacitor active filter
Number of Filter Building Blocks 4 blocks
Filter Order per Building Block 2nd order
Architecture Switched-capacitor
Response Type Universal
Typical Cutoff Frequency 20 kHz
Typical Supply Current per Building Block 850 µA
Typical Dual Supply Voltage ±3 V or ±5 V
Minimum Dual Supply Voltage ±2.37 V
Maximum Dual Supply Voltage ±8 V
Temperature Grade Industrial
Terminal Form Through-hole
Number of Terminals 24 terminals
Package Code DIP
Paket 24-pin ceramic DIP
Montaj Türü Through-hole

LTC1164CJ 24-pin ceramic dip Pin Yapısı Kılavuzu

LTC1164CJ (24-pin ceramic dip paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

24-pin ceramic dip paket pin çizelgesi için LTC1164CJ

Ayrıntılı pin çıkış verisi mevcut değil: LTC1164CJ.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LTC1164CJ için uygundur 6 uygulamas: Anti-Alias Filtering for Data Acquisition, Low-Level Sensor Signal Conditioning, Audio Signal Conditioning, Programmable Industrial Test Equipment, Communication Signal Conditioning, Legacy Through-Hole Instrumentation.

🖥️

Anti-Alias Filtering for Data Acquisition

The LTC1164CJ is appropriate ahead of an analog-to-digital converter when a compact, multi-section analog filter is needed to suppress out-of-band energy before sampling. Its four second-order switched-capacitor building blocks can be organized into multiple filtering paths or a higher-order composite response, while each section typically consumes 850 µA. The 20 kHz cutoff range and ±2.37 V to ±8 V supply capability suit low-power measurement systems. Engineers should determine the required cutoff and attenuation from the converter specification, select external timing and resistor components accordingly, and verify alias-rejection performance across the complete frequency range in the finished circuit.

🧩

Low-Level Sensor Signal Conditioning

The LTC1164CJ can condition small sensor signals before amplification or digitization by providing programmable low-pass, high-pass, band-pass, band-stop, or notch sections. Its low-noise, low-power operation is useful when preserving weak signals is more important than using discrete passive filter networks. Four independent second-order sections allow several channels or a more selective response to be implemented in one 24-pin ceramic DIP package. Component tolerance, clock feedthrough, signal range, and settling time must be checked against the manufacturer data sheet before the filter is placed directly in front of a precision sensor chain.

🎧

Audio Signal Conditioning

The LTC1164CJ is suitable for audio-band filtering where several second-order sections are needed to shape frequency response or reject noise outside the useful band. Its universal switched-capacitor architecture supports low-pass, high-pass, band-pass, band-stop, and notch configurations, and the 20 kHz cutoff range covers the upper audio band. The four building blocks can implement stereo or multi-channel filtering with a common device. Because clock-related feedthrough can affect audio noise performance, clock routing, grounding, external component selection, and output loading require careful evaluation using the manufacturer application guidance.

🏭

Programmable Industrial Test Equipment

The LTC1164CJ fits compact industrial instrumentation that needs several adjustable filter sections within a limited board area. Each section is a second-order universal switched-capacitor building block, allowing one IC to implement multiple filter responses without four separate discrete networks. The typical 850 µA consumption per section supports power-conscious portable test systems, while dual supplies from ±2.37 V to ±8 V provide compatibility with conventional bipolar analog signal levels. In production test equipment, validate clock stability, component tolerances, calibration range, and temperature performance over the complete operating environment before using the filter as a measurement front end.

🌐

Communication Signal Conditioning

The LTC1164CJ can provide channel-selective filtering in communication and interface modules that need low-power second-order analog sections. Its universal response capability allows external component choices to support band-pass or notch behavior around a selected frequency, while the four-section architecture can process several related channels. The 20 kHz usable cutoff range and typical ±3 V or ±5 V dual supplies fit low-speed signal-conditioning requirements. Designers should calculate the required center frequency and bandwidth, account for clock feedthrough and component tolerances, and confirm that the source amplitude remains within the manufacturer-specified operating range.

🔧

Legacy Through-Hole Instrumentation

The LTC1164CJ is appropriate for legacy through-hole instrument platforms that require four universal second-order filter sections on a 24-pin ceramic DIP footprint. The industrial temperature grade suits many industrial measurement environments, and the low-power architecture avoids the component count associated with four discrete active-filter networks. This makes the device useful when redesigning legacy analog boards or adding a selectable filter bank to laboratory equipment. Before production use, verify the exact package drawing, pin assignments, supply sequencing, clock source, and external component values against the manufacturer data sheet, especially when the board also supports more than one filter configuration.

What is the LTC1164CJ?
The LTC1164CJ is a low-power, low-noise quad universal switched-capacitor filter containing four independent second-order filter building blocks. According to the Analog Devices LTC1164 product page, each building block typically consumes 850 µA, and the device supports dual supplies from ±2.37 V to ±8 V. The part is packaged for through-hole assembly in a 24-pin ceramic DIP.
How many filters are integrated in the LTC1164CJ?
The LTC1164CJ integrates four universal active-filter building blocks, and each block is a second-order switched-capacitor section. This architecture allows one package to implement several filter channels or a higher-order composite response. The Analog Devices LTC1164 product page identifies the device as a quad of low-power, low-noise second-order building blocks.
What supply voltage does the LTC1164CJ require?
The LTC1164CJ operates from ±2.37 V to ±8 V, with ±3 V and ±5 V identified as typical dual supply conditions. The Analog Devices LTC1164 product page and the published comparison information identify this operating range. Designers should confirm signal-source levels, clock amplitude, and grounding requirements against the manufacturer datasheet before implementation.
What is the power consumption of the LTC1164CJ?
Each LTC1164CJ filter building block typically consumes 850 µA of supply current. Because the device contains four building blocks, engineers should include all four sections in their power-budget calculation when every section is active. The Analog Devices LTC1164 product page states the typical current per building block rather than a single total-device figure.
Where can I download the LTC1164CJ datasheet PDF?
The official LTC1164CJ documentation starts with the Analog Devices LTC1164 product page, where the manufacturer provides the data sheet and supporting resources. The datasheet is also indexed through the LTC1164CJ PDF result listed on AllDataSheet. For design release, use the manufacturer data sheet as the controlling document for pin functions, clocking, external components, and performance limits.
Where can I find the LTC1164CJ pinout?
The LTC1164CJ pinout and pin-description table are located in the manufacturer data sheet linked from the Analog Devices LTC1164 product page. The LTC1164CJ uses a 24-pin through-hole ceramic DIP package. Assign individual PCB nets only after checking the manufacturer pin-description table, especially the supply, ground, clock, and signal terminals.
What filter responses can the LTC1164CJ implement?
The LTC1164CJ is a universal filter building block that can support second-order low-pass, high-pass, band-pass, band-stop, and notch configurations when its external components are selected appropriately. The Analog Devices LTC1164 product page identifies the architecture as a universal switched-capacitor filter. Confirm the exact component values and clock arrangement in the manufacturer application guidance.
LTC1164CJ vs LTC1164MJ - which is better?
The LTC1164CJ is the industrial-temperature version, while the LTC1164MJ is identified as a military-temperature alternative. Both are based on the same quad switched-capacitor filter architecture and operate over the same stated ±2.37 V to ±8 V supply range. Choose the CJ for industrial equipment and evaluate the MJ when an extended-temperature military-grade requirement applies.
When should I choose the LTC1164CJ over LTC1164AMJ?
Choose the LTC1164CJ when an industrial-temperature, low-power quad filter is sufficient and the assembly uses the 24-pin through-hole footprint. The LTC1164AMJ is the military-grade family alternative identified in the published comparison results. The AMJ option is appropriate when a program requires that temperature grade, while the CJ offers the lower commercial qualification requirement.
What is the best drop-in replacement for the LTC1164CJ?
The LTC1164MJ is the closest documented drop-in candidate for the LTC1164CJ because it uses the same LTC1164 filter family and is compared against the CJ for equivalent supply operation. Its primary engineering difference is temperature grade: MJ is military-oriented, whereas CJ is industrial. Check the complete manufacturer pinout, package drawing, and qualification requirements before exchanging populated boards.
Can LTC1164MJ replace an LTC1164CJ without PCB changes?
The LTC1164MJ can be considered for an LTC1164CJ replacement because both belong to the same 24-pin LTC1164 switched-capacitor filter family and share the stated ±2.37 V to ±8 V operating range. However, the temperature-grade designation differs, and the manufacturer package drawing must be checked for exact mechanical equivalence. A PCB change is not expected, but production qualification still requires review.
What Analog Devices equivalent is available for the LTC1164CJ?
The closest Analog Devices-family candidate identified for the LTC1164CJ is the LTC1164MJ, a military-temperature version of the same universal switched-capacitor filter. The LTC1164AMJ is another same-family military option. No verified cross-brand drop-in equivalent was identified, so an LTC1164-family substitution is preferable to assuming that a different manufacturer has an electrically and mechanically identical 24-pin part.
Is the LTC1164CJ suitable for low-level sensor signal conditioning?
The LTC1164CJ is suitable for low-level sensor conditioning when the required response, bandwidth, noise, and dynamic range remain within the filter's specified operating limits. Its low-noise, low-power operation is useful for conditioning weak signals before amplification or conversion. The manufacturer data sheet should be checked for input range, clock feedthrough, distortion, and settling behavior.
How should the LTC1164CJ clock signal be routed?
Route the LTC1164CJ clock using a short, controlled trace and keep it away from sensitive filter inputs and outputs to reduce coupling of switching energy. Provide a stable clock frequency with low distortion because clock-related feedthrough can influence the filter output. Grounding and decoupling strategy should follow the manufacturer layout guidance and account for the device's dual-supply requirements.
Where can I buy the LTC1164CJ and check its price and lead time?
Use the Request a Quote form on this page to ask about LTC1164CJ price, current stock, order quantity, lead time, and available shipping configuration. The Analog Devices product page identifies LTC1164 as a production family and provides manufacturer ordering information. The current commercial status and delivery schedule should be confirmed at the time of quotation rather than assumed from historic listings.
What are the key specifications of LTC1164CJ that engineers should know?
The LTC1164CJ combines four second-order universal switched-capacitor filter sections, approximately 850 µA typical supply current per section, a 20 kHz cutoff range, and dual supply operation from ±2.37 V to ±8 V. It uses a 24-pin ceramic DIP package with a specified industrial temperature grade. These figures make it a compact choice for four-channel low-power filtering.

Mühendislik referans verileri: LTC1164CJ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LTC1164CJ when the design needs four low-power, second-order universal switched-capacitor filter sections, a 20 kHz cutoff range, dual supplies from ±2.37 V to ±8 V, and an industrial temperature-grade part in a 24-pin through-hole ceramic DIP package. It is especially useful for compact data-acquisition, sensor-conditioning, audio, and legacy instrumentation designs. Consider LTC1164MJ when the same functional family and supply range are required but the environmental program calls for a military-grade version. LTC1164AMJ is another same-family military option. Both documented alternatives maintain the quad switched-capacitor architecture, but their qualification and temperature-grade requirements differ from the CJ. No verified cross-brand 24-pin drop-in replacement was identified, so avoid assuming that another manufacturer's active filter is mechanically and electrically interchangeable. Before final selection, verify the manufacturer pinout, package drawing, clock requirements, external component formulas, signal-range limits, and qualification obligations.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LTC1164MJ LTC1164AMJ
Package 24-pin ceramic DIP 24-pin ceramic DIP 24-pin ceramic DIP
Brand Analog Devices Analog Devices Analog Devices
Product Type Quad universal switched-capacitor active filter Quad universal switched-capacitor active filter Quad universal switched-capacitor active filter
Number of Building Blocks 4 4 4
Filter Order per Building Block 2nd order 2nd order 2nd order
Typical Cutoff Frequency 20 kHz 20 kHz 20 kHz
Typical Supply Current per Building Block 850 µA 850 µA 850 µA
Supply Voltage Range ±2.37 V to ±8 V ±2.37 V to ±8 V ±2.37 V to ±8 V
Temperature Grade Industrial Military Military
Mounting Type Through-hole Through-hole Through-hole

Ana Farklılayıcılar

  • Four integrated universal second-order sections (karşılaştırma:LTC1164MJ)
  • Industrial-grade family option (karşılaştırma:LTC1164AMJ)
  • Low-power quad-filter integration (karşılaştırma:LTC1164MJ)

Tasarım Notları

Route the clock away from sensitive filter inputs, outputs, and high-impedance nodes to minimize switching-energy coupling. Keep external timing components close to their associated pins, maintain a stable ground return for the clock source, and avoid sharing long return paths with switching regulators. Because the architecture uses clocked switched-capacitor networks, clock feedthrough can influence small-signal measurements even when the nominal filter response is correct.

Do not treat the four sections as independently unrestricted by the IC data sheet. Check each section's configured response, signal range, external component values, and sharing requirements before combining sections into a higher-order filter. Also account for the 850 µA typical current consumed by each building block when estimating the complete power budget. Component tolerances should be included in cutoff-frequency and gain-error calculations.

Use a conventional 24-pin through-hole footprint compatible with the manufacturer's ceramic DIP drawing and verify orientation against pin 1 before fabrication. Decouple each supply rail near the device, maintain a low-impedance analog ground structure, and isolate clock and filter-node routing from high-current switching paths. If the board combines the filter with converters or digital logic, complete layout review should occur before copper release.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The Analog Devices product page identifies LTC1164 as a production family, but the product-level RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed. AEC-Q100 is not applicable to this industrial-grade active filter.

Veri doğrulanma tarihi: 2026-11-09 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LTC1164CJ datasheet LTC1164CJ datasheet pdf LTC1164CJ pinout LTC1164CJ specifications LTC1164CJ equivalent LTC1164CJ replacement LTC1164CJ cross reference LTC1164CJ vs LTC1164MJ Analog Devices LTC1164CJ LTC1164CJ 24 pin ceramic DIP LTC1164CJ switched capacitor filter LTC1164CJ price

İlgili Bileşenler ve Terimler

Analog Devices LTC1164CJ LTC1164MJ LTC1164AMJ LTC1164 switched-capacitor filter active filter universal filter second-order filter quad filter signal conditioning analog integrated circuit low-noise filter low-power filter anti-alias filter clock feedthrough dual supply voltage 850 µA typical supply current 20 kHz cutoff ceramic DIP 24-pin DIP through-hole package industrial temperature grade
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle