Microchip Technology

M2GL005-VFG256I - 6K IGLOO2 Flash FPGA | Microchip

MPN: M2GL005-VFG256I ✓ सक्रिय
1.14 V to 2.625 V Vdss 256-FPBGA, 14 x 14 mm Package Flash-based nonvolatile configuration Memory
न्यूनतम ऑर्डर मात्रा: 1 |

M2GL005-VFG256I अवलोकन

The Microchip Technology M2GL005-VFG256I is a 6,060-logic-element IGLOO2 flash FPGA with 719,872 bits of RAM, 161 I/O, and a 256-FPBGA package measuring 14 x 14 mm. The device operates from a 1.14 V to 2.625 V core-voltage range and uses a nominal 1.2 V supply, making it suitable for compact embedded, communications, industrial, and system-management designs.

An FPGA is a user-programmable semiconductor containing configurable logic blocks, programmable interconnect, and I/O resources. The M2GL005 belongs to the IGLOO2 family of low-density flash FPGAs, positioning it between simple programmable logic devices and higher-capacity FPGAs. Its nonvolatile configuration memory allows the device to retain its programmed logic after power removal, simplifying firmware updates and eliminating an external configuration PROM in many designs.

The M2GL005 fabric provides 6,060 logic elements, 719,872 RAM bits, and 161 I/O in a compact 256-FPBGA package. Microchip describes the fourth-generation flash-based fabric as suitable for general-purpose functions including bridging, I/O expansion and conversion, system management, and secure connectivity. The large I/O count is especially useful for parallel interfaces, control logic, data acquisition, and mixed peripheral bridging.

The IGLOO2 architecture integrates programmable logic and user-accessible memory for datapath buffering, packet handling, status storage, and small finite-state-machine implementations. Flash configuration retains the design between power cycles, while on-chip RAM remains volatile and can serve as working memory. Designers should size simultaneous RAM use, routing demand, and I/O utilization rather than relying only on the total logic-element count.

Typical applications include industrial control modules, communications infrastructure, network-bridge and protocol-conversion equipment, medical monitoring interfaces, defense systems, and embedded industrial-control panels. The 161 available I/O support compact signal conditioning and multi-interface connectivity, while the low-density 6K fabric keeps board area and configuration complexity moderate compared with larger FPGA families.

The principal design consideration is the 1.14 V to 2.625 V operating range. Board-level power sequencing, decoupling, input tolerances, and I/O standards must be checked against the device configuration. Because the package uses 256 fine-pitch balls, PCB layout must follow the manufacturer's mechanical and pin-assignment guidance, particularly for power distribution and high-speed I/O routing.

This page combines the exact M2GL005-VFG256I resource data with package information, focused replacement guidance, design notes, and a parameter comparison. It helps engineers distinguish true same-footprint alternatives from related IGLOO2 devices that use different packages or capacities.

के लिए ड्रॉप-इन विकल्प M2GL005-VFG256I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं M2GL005-VFG256I (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Configuration Memory, Logic Elements, Device Type, Programmable Logic.

Microchip Technology
Package: 256-ball FBGA (VF256)
Configuration Memory: On-chip non-volatile flash
इसके साथ तुलना करें M2GL005-VFG256I →
Microchip Technology
Package: 256-LFBGA
Logic Elements: 5K logic elements
Device Type: IGLOO2 flash FPGA
इसके साथ तुलना करें M2GL005-VFG256I →
Microchip Technology
Package: 256-ball LFBGA
Configuration Memory: On-chip flash
Logic Elements: 6,000 logic elements
इसके साथ तुलना करें M2GL005-VFG256I →
Microchip Technology
Package: 256-LFBGA
Configuration Memory: Flash-based FPGA configuration
Logic Elements: 6K logic elements
इसके साथ तुलना करें M2GL005-VFG256I →

M2GL005-VFG256

✅ ड्रॉप-इन
Microchip Technology
📦 256-FPBGA
IGLOO2 low-density field-programmable gate array (FPGA) · 6K logic elements · 161 I/O · Flash-based FPGA configuration · 256-LFBGA · In Production · IGLOO2 · Flash field-programmable gate array

कीमत के लिए संपर्क करें

डेटाशीट देखें →

M2GL005-VF256I

✅ ड्रॉप-इन
Microchip Technology
📦 256-FPBGA
IGLOO2 low-density flash FPGA · 6,000 logic elements · 6,060 cells · 128 Kbits · 64 KB · 703 Kbits · 1.2 V · 1.26 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

M2GL005-VF256

✅ ड्रॉप-इन
Microchip Technology
📦 256-FPBGA
IGLOO2 flash FPGA · 5K logic elements · 161 I/O · 256-LFBGA · FBGA · Surface mount · Reconfigurable digital logic · Configurable on-chip interconnect

कीमत के लिए संपर्क करें

डेटाशीट देखें →

M2GL005-VFG256I Maximum Ratings और Electrical Characteristics

Device Type IGLOO2 low-density flash FPGA
Logic Elements 6,060 logic elements
Total RAM 719,872 RAM bits
User I/O 161 I/O
Core Supply Voltage 1.14 V to 2.625 V
Nominal Operating Voltage 1.2 V
पैकेज 256-FPBGA, 14 x 14 mm
Package Pin Count 256 balls
Configuration Memory Flash-based nonvolatile configuration
FPGA Generation Fourth-generation flash-based fabric
Temperature Grade Industrial temperature grade
Product Family IGLOO2
Programmable Logic 6K programmable logic cells
On-Chip RAM 719,872 bits
I/O Expansion Supported
System Management Supported
Secure Connectivity Supported
माउंटिंग प्रकार Surface mount

M2GL005-VFG256I 256 balls पिन कॉन्फ़िगरेशन गाइड

M2GL005-VFG256I (256 balls पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

M2GL005-VFG256I के लिए 256 balls पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: M2GL005-VFG256I.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

M2GL005-VFG256I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Protocol Conversion, Data Acquisition and Signal Conditioning, Secure Connectivity and Authentication, Medical Monitoring Interface, Embedded System Management, Aerospace and Defense Support Logic.

🏭

Industrial Protocol Conversion

The M2GL005-VFG256I is suitable for compact industrial protocol converters that translate between parallel digital interfaces and serialized communications. Its 6,060 logic elements can support state machines, framing logic, buffers, and supervisory functions, while 719,872 RAM bits provide working storage for packet assembly, counters, and diagnostics. The 161 I/O allow multiple bus interfaces and status signals without requiring a larger FPGA. Place the device between field-level transceivers and a host processor, then validate timing against the selected I/O standard and industrial operating requirements.

📊

Data Acquisition and Signal Conditioning

The M2GL005-VFG256I can collect parallel sensor data, perform digital filtering, and format samples for transmission to a controller. Its 161 I/O provide substantial connectivity for sensor outputs, trigger signals, and actuator controls, while the flash-based fabric retains its acquisition-control configuration during power cycles. The 719,872 RAM bits can buffer multiple sample frames or support finite-state-machine operation. Engineers should budget logic and RAM for triggering, calibration tables, data packing, and diagnostics, and confirm every external signal against the configured I/O voltage and timing limits.

🌐

Secure Connectivity and Authentication

The M2GL005-VFG256I can implement protocol handshakes, message authentication, key-management control, and secure-connectivity front ends where nonvolatile logic is valuable. Its 6,060 logic elements support parallel cryptographic control paths, state tracking, and data movement, while 719,872 RAM bits accommodate buffers and intermediate values. The industrial-grade ordering option supports deployments requiring a wider environmental envelope. Security implementations should use validated algorithms and appropriate key-protection practices, with hardware boundaries and timing behavior reviewed against the complete system threat model.

💊

Medical Monitoring Interface

The M2GL005-VFG256I is useful as a configurable interface and supervisory controller in medical monitoring equipment where multiple sensors, isolation boundaries, and status indicators must be coordinated. Its 161 I/O support parallel sensor inputs, alarm outputs, and communications interfaces, while the flash configuration preserves operating logic across resets. The device can perform signal routing, timing generation, filtering, and event logging without relying on a separate programmable-logic device. Final medical use requires system-level risk analysis, electrical-safety compliance, and verification of every external interface rather than reliance on FPGA qualification alone.

🖥️

Embedded System Management

The M2GL005-VFG256I can consolidate power sequencing, watchdog, interrupt aggregation, firmware-event logging, and peripheral-control functions into one embedded system-management device. Its 6,060 logic elements are appropriate for moderate control graphs, and 719,872 RAM bits can hold event queues and configuration state. Flash configuration permits autonomous operation immediately after reset, which helps reduce host-processor dependency. Design the power-management state machine around deterministic reset behavior, implement fail-safe outputs, and check all supply and I/O constraints against the manufacturer’s electrical specifications.

✈️

Aerospace and Defense Support Logic

The M2GL005-VFG256I can implement avionics-adjacent interface logic, data routers, sequencers, and secure-control functions where compact programmable logic is useful. The 161 I/O enable several parallel interfaces, while the 6,060 logic elements and 719,872 RAM bits support moderate datapath and state-machine workloads. Nonvolatile flash configuration allows the programmed function to be retained for rapid startup after power restoration. Deployment requires program-specific screening, reliability analysis, environmental verification, and controlled configuration management; component selection alone does not establish suitability for a flight-critical or defense qualification program.

What are the key specifications of M2GL005-VFG256I that engineers should know?
The M2GL005-VFG256I is a 6,060-logic-element IGLOO2 flash FPGA with 719,872 RAM bits, 161 I/O, and a 256-FPBGA package. According to the Microchip IGLOO2 family datasheet, its core-voltage range is 1.14 V to 2.625 V, with a nominal operating voltage of 1.2 V. These resources make it appropriate for protocol conversion, bridging, I/O expansion, control logic, and system-management functions where a compact, nonvolatile FPGA is useful.
M2GL005-VFG256I datasheet
The authoritative M2GL005-VFG256I datasheet is the Microchip document titled “IGLOO 2 FPGA and SmartFusion 2 SoC FPGA Datasheet.” It covers the electrical AC and DC specifications for the IGLOO2 family and its supported M2GL005 temperature grades. Use the manufacturer PDF for operating limits, power characteristics, timing, and family-level electrical data, and the IGLOO2 packaging and pin-descriptions user guide for ball assignments and mechanical information.
Where can I find the M2GL005-VFG256I pinout?
The M2GL005-VFG256I pinout is documented in Microchip’s “IGLOO 2 FPGA Packaging and Pin Descriptions User Guide,” available from the manufacturer’s website. That guide identifies bank assignments, package details, and ball functions for the 256-FPBGA configuration. Use the pin-description tables when assigning power, ground, configuration pins, and user I/O because ball names and reusable I/O functions depend on the selected device configuration.
What is the operating voltage of M2GL005-VFG256I?
The M2GL005-VFG256I operates from 1.14 V to 2.625 V and is identified as a 1.2 V device in its ordering information. The manufacturer’s IGLOO2 family datasheet is the correct reference for the complete DC operating limits and temperature-dependent conditions. Supply design should include correct sequencing, local decoupling, and verification that every enabled I/O interface remains compatible with the configured voltage range.
How much logic, RAM, and I/O does M2GL005-VFG256I provide?
The M2GL005-VFG256I contains 6,060 logic elements, 719,872 RAM bits, and 161 user I/O. Microchip classifies it as a low-density IGLOO2 device, so the main design consideration is simultaneous resource utilization rather than the maximum device headline. A practical fit should leave timing and routing margin and account for the RAM needed by the FPGA fabric, configuration logic, control status, and the selected I/O standards.
What can replace the M2GL005-VFG256I?
A verified drop-in replacement should retain the 256-FPBGA footprint, pin-to-pin assignments, and approximately 6K logic-element configuration of the M2GL005-VFG256I. The closest same-family ordering variants documented for this package include M2GL005-VFG256 and M2GL005-VF256I, but the exact temperature grade and ordering-code differences must be checked before substitution. No verified cross-brand, same-footprint replacement was identified, so a new PCB footprint should not be assumed.
Is M2GL005-VFG256I the same as M2GL005-VFG256?
The M2GL005-VFG256 and M2GL005-VFG256I share the IGLOO2 M2GL005 device identity and 256-FPBGA package, while the additional I ordering suffix distinguishes the temperature-grade version. The M2GL005-VFG256I is described as industrial temperature grade. Confirm the exact manufacturer ordering information and environmental requirements before treating the base M2GL005-VFG256 as an equivalent replacement for an industrial design.
Can M2GL005-VF256I replace M2GL005-VFG256I?
The M2GL005-VF256I is a closely related M2GL005 ordering variant that is listed for the 256-FPBGA device family and is identified with a 6K logic-element configuration. However, replacement approval must include a manufacturer ordering-code review because package-code, voltage, and temperature-grade details must match the assembled board. Confirm the complete suffix and obtain a formal pin-and-parameter cross-reference before approving it as a drop-in substitution.
When should I choose M2GL005-VFG256I over M2GL005-VFG256?
Choose M2GL005-VFG256I when the assembly must meet the industrial temperature grade associated with the I suffix. Choose M2GL005-VFG256 when its manufacturer-defined temperature grade satisfies the product requirements and a lower-temperature commercial grade is appropriate. For either decision, verify the full ordering code, operating-temperature limits, and qualification requirements against the system’s environmental requirements rather than relying on package similarity alone.
Is M2GL005-VFG256I suitable for industrial control and bridging applications?
The M2GL005-VFG256I is suitable for many industrial control and bridging functions because it provides 6,060 logic elements, 719,872 RAM bits, and 161 I/O in an industrial-grade ordering configuration. Microchip identifies IGLOO2 devices for bridging, I/O expansion and conversion, system management, and secure connectivity. Final suitability depends on the selected I/O standards, timing, operating-temperature envelope, and system reliability requirements.
What is the best cross-brand equivalent for M2GL005-VFG256I?
No cross-brand equivalent with a verified 256-ball pin-compatible footprint and equivalent IGLOO2 resource profile was identified. FPGA interchangeability depends on more than logic count: ball assignments, configuration pins, memory mapping, I/O behavior, voltage limits, and programming tools must all align. The safest replacement path is therefore a documented Microchip ordering variant or a complete PCB redesign around a suitably qualified alternative.
M2GL005-VFG256I vs M2GL025-VFG256: which is better?
M2GL005-VFG256I is the lower-capacity option with 6,060 logic elements, while M2GL025-VFG256 belongs to a larger device in the same IGLOO2 family and is available in the same 256-FPBGA format. Choose M2GL005-VFG256I for designs that fit comfortably below 6K logic elements; choose M2GL025-VFG256 when routing, RAM, or I/O requirements exceed the smaller device. Verify timing, resource allocation, power, and software support before migration.
Where to buy M2GL005-VFG256I online?
Use the “Request a Quote” form on this page to request M2GL005-VFG256I availability, current lead time, and order handling. The request should state the required quantity, package form, and any date-code or traceability requirement. Because inventory and component availability can change quickly, obtain confirmation before committing the FPGA into a production build or long-lead procurement schedule.
What is the price of M2GL005-VFG256I?
The current M2GL005-VFG256I price is shown through the “Request a Quote” form on this page. The request should include the required quantity and whether reels, trays, or another approved shipping format are needed. Because pricing and availability can change with market conditions and order volume, use the quoted response for budget approval and procurement rather than relying on an older listing value.
What is the lead time for M2GL005-VFG256I?
Request the current M2GL005-VFG256I lead time through the “Request a Quote” form on this page, including your required quantity and delivery target. Lead time can vary with manufacturing availability, packaging, order volume, and traceability requirements. For production planning, request a schedule that accounts for PCB assembly, programming, test, and any device substitutions rather than considering component availability alone.

के लिए इंजीनियरिंग संदर्भ डेटा M2GL005-VFG256I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose M2GL005-VFG256I when a design needs the 256-FPBGA footprint, 6,060 logic elements, 719,872 RAM bits, and 161 I/O together with an industrial-temperature ordering designation. It is well suited to protocol conversion, system management, I/O expansion, secure connectivity, and compact acquisition functions. Consider M2GL005-VFG256 when its non-I temperature grade satisfies the product environment and the complete ordering code matches the PCB. Use M2GL005-VF256I or M2GL005-VF256 only after checking the package-code distinction against the manufacturer ordering guide. If the design exceeds available logic, RAM, routing, or timing margin, move to a larger IGLOO2 device rather than forcing a fit. No verified cross-brand drop-in alternative was identified, so a second-source strategy should include a formal pin, timing, I/O, and software-tool cross-check or a planned PCB change.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद M2GL005-VFG256 M2GL005-VF256I M2GL005-VF256
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 256-FPBGA, 14 x 14 mm 256-FPBGA 256-FPBGA 256-FPBGA
Logic Elements 6,060 6,060 6,060 6,060
Total RAM 719,872 bits 719,872 bits 719,872 bits 719,872 bits
User I/O 161 161 161 161
Core Voltage Range 1.14 V to 2.625 V 1.14 V to 2.625 V 1.14 V to 2.625 V 1.14 V to 2.625 V
Temperature Designation Industrial grade with I suffix Base suffix; exact grade requires ordering-code confirmation Industrial grade with I suffix Base suffix; exact grade requires ordering-code confirmation
Configuration Memory Flash-based nonvolatile configuration Flash-based nonvolatile configuration Flash-based nonvolatile configuration Flash-based nonvolatile configuration
FPGA Family IGLOO2 IGLOO2 IGLOO2 IGLOO2

मुख्य विशेषताएँ

  • Industrial temperature designation (बनामM2GL005-VFG256)
  • High I/O density in a compact package (बनामM2GL025-VFG256)
  • Nonvolatile configuration for autonomous startup (बनामM2GL005-VF256)

डिज़ाइन नोट्स

Design the 1.14 V to 2.625 V core supply with sequencing and decoupling that satisfy the IGLOO2 family electrical requirements. Place the required bypass capacitors close to their assigned power balls, keep the return path continuous, and isolate noisy switching nodes from the core rail. Check the manufacturer’s power-up and power-down limits for every I/O state because externally driven pins can influence rail behavior during power transitions.

Use the 256-FPBGA mechanical drawing and ball-assignment guide to create the pad stack, solder mask, paste stencil, and assembly process. The 14 x 14 mm package has fine-pitch balls, so verify PCB capability and inspection coverage before release. Separate sensitive configuration or clock balls from noisy interfaces where practical, and provide uninterrupted ground-reference paths beneath the device.

Assign reusable I/O to the correct voltage banks and confirm every external interface’s signal integrity before layout sign-off. Differential or high-speed interfaces require manufacturer-recommended input impedance, trace geometry, and return-path arrangements. Avoid routing sensitive clocks across programmable logic boundaries and keep configuration-access pins away from sources of aggressive ESD or high-energy switching noise.

Do not infer compatibility from the M2GL005 label alone. Verify the complete ordering suffix, package code, temperature grade, voltage configuration, and ball assignments before substituting M2GL005-VFG256, M2GL005-VF256I, or M2GL005-VF256. Resource overflow can also occur even when logic count appears sufficient, so run synthesis and timing analysis with the actual constraints and reserve routing margin.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer automotive-grade datasheet is listed as a source, but no explicit compliance declaration for this exact ordering code was available in the referenced product information.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

m2gl005 vfg256i m2gl005 vfg256i datasheet m2gl005 vfg256 m2gl005 tqg144i m2gl005 tqg144 m2gl005 datasheet M2GL005-VFG256I pinout M2GL005-VFG256I datasheet pdf M2GL005-VFG256I replacement M2GL005-VFG256I equivalent M2GL005-VFG256I price Microchip Technology M2GL005-VFG256I M2GL005-VFG256I application circuit M2GL005-VFG256I 256-FPBGA

संबंधित कंपोनेंट्स और शब्द

Microchip Technology M2GL005-VFG256I M2GL005-VFG256 M2GL005-VF256I M2GL005-VF256 M2GL025-VFG256 IGLOO2 FPGA field-programmable gate array flash-based FPGA nonvolatile configuration memory programmable logic logic elements embedded RAM user I/O 256-FPBGA BGA surface-mount package industrial temperature grade protocol conversion I/O expansion system management secure connectivity 1.14 V to 2.625 V
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें