M2GL005-VFG256I - 6K IGLOO2 Flash FPGA | Microchip
MPN: M2GL005-VFG256I ✓ NakahandaM2GL005-VFG256I Ulas
An FPGA is a user-programmable semiconductor containing configurable logic blocks, programmable interconnect, and I/O resources. The M2GL005 belongs to the IGLOO2 family of low-density flash FPGAs, positioning it between simple programmable logic devices and higher-capacity FPGAs. Its nonvolatile configuration memory allows the device to retain its programmed logic after power removal, simplifying firmware updates and eliminating an external configuration PROM in many designs.
The M2GL005 fabric provides 6,060 logic elements, 719,872 RAM bits, and 161 I/O in a compact 256-FPBGA package. Microchip describes the fourth-generation flash-based fabric as suitable for general-purpose functions including bridging, I/O expansion and conversion, system management, and secure connectivity. The large I/O count is especially useful for parallel interfaces, control logic, data acquisition, and mixed peripheral bridging.
The IGLOO2 architecture integrates programmable logic and user-accessible memory for datapath buffering, packet handling, status storage, and small finite-state-machine implementations. Flash configuration retains the design between power cycles, while on-chip RAM remains volatile and can serve as working memory. Designers should size simultaneous RAM use, routing demand, and I/O utilization rather than relying only on the total logic-element count.
Typical applications include industrial control modules, communications infrastructure, network-bridge and protocol-conversion equipment, medical monitoring interfaces, defense systems, and embedded industrial-control panels. The 161 available I/O support compact signal conditioning and multi-interface connectivity, while the low-density 6K fabric keeps board area and configuration complexity moderate compared with larger FPGA families.
The principal design consideration is the 1.14 V to 2.625 V operating range. Board-level power sequencing, decoupling, input tolerances, and I/O standards must be checked against the device configuration. Because the package uses 256 fine-pitch balls, PCB layout must follow the manufacturer's mechanical and pin-assignment guidance, particularly for power distribution and high-speed I/O routing.
This page combines the exact M2GL005-VFG256I resource data with package information, focused replacement guidance, design notes, and a parameter comparison. It helps engineers distinguish true same-footprint alternatives from related IGLOO2 devices that use different packages or capacities.
Mga alternatibo na pwedeng ilagay na M2GL005-VFG256I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok M2GL005-VFG256I (parehas na form factor at footprint) — pagkakaiba sa Package, Configuration Memory, Logic Elements, Device Type, Programmable Logic.
M2GL005-VFG256
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →M2GL005-VF256I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →M2GL005-VF256
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →M2GL005-VFG256I Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 6,060 logic elements |
| Total RAM | 719,872 RAM bits |
| User I/O | 161 I/O |
| Core Supply Voltage | 1.14 V to 2.625 V |
| Nominal Operating Voltage | 1.2 V |
| Packhaging | 256-FPBGA, 14 x 14 mm |
| Package Pin Count | 256 balls |
| Configuration Memory | Flash-based nonvolatile configuration |
| FPGA Generation | Fourth-generation flash-based fabric |
| Temperature Grade | Industrial temperature grade |
| Product Family | IGLOO2 |
| Programmable Logic | 6K programmable logic cells |
| On-Chip RAM | 719,872 bits |
| I/O Expansion | Supported |
| System Management | Supported |
| Secure Connectivity | Supported |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng M2GL005-VFG256I 256 balls
Pin configuration para sa M2GL005-VFG256I (256 balls package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa M2GL005-VFG256I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
M2GL005-VFG256I ay nararapat para sa 6 aplikasyons: Industrial Protocol Conversion, Data Acquisition and Signal Conditioning, Secure Connectivity and Authentication, Medical Monitoring Interface, Embedded System Management, Aerospace and Defense Support Logic.
Industrial Protocol Conversion
The M2GL005-VFG256I is suitable for compact industrial protocol converters that translate between parallel digital interfaces and serialized communications. Its 6,060 logic elements can support state machines, framing logic, buffers, and supervisory functions, while 719,872 RAM bits provide working storage for packet assembly, counters, and diagnostics. The 161 I/O allow multiple bus interfaces and status signals without requiring a larger FPGA. Place the device between field-level transceivers and a host processor, then validate timing against the selected I/O standard and industrial operating requirements.
Inirekomenda
Data Acquisition and Signal Conditioning
The M2GL005-VFG256I can collect parallel sensor data, perform digital filtering, and format samples for transmission to a controller. Its 161 I/O provide substantial connectivity for sensor outputs, trigger signals, and actuator controls, while the flash-based fabric retains its acquisition-control configuration during power cycles. The 719,872 RAM bits can buffer multiple sample frames or support finite-state-machine operation. Engineers should budget logic and RAM for triggering, calibration tables, data packing, and diagnostics, and confirm every external signal against the configured I/O voltage and timing limits.
Inirekomenda
Secure Connectivity and Authentication
The M2GL005-VFG256I can implement protocol handshakes, message authentication, key-management control, and secure-connectivity front ends where nonvolatile logic is valuable. Its 6,060 logic elements support parallel cryptographic control paths, state tracking, and data movement, while 719,872 RAM bits accommodate buffers and intermediate values. The industrial-grade ordering option supports deployments requiring a wider environmental envelope. Security implementations should use validated algorithms and appropriate key-protection practices, with hardware boundaries and timing behavior reviewed against the complete system threat model.
Inirekomenda
Medical Monitoring Interface
The M2GL005-VFG256I is useful as a configurable interface and supervisory controller in medical monitoring equipment where multiple sensors, isolation boundaries, and status indicators must be coordinated. Its 161 I/O support parallel sensor inputs, alarm outputs, and communications interfaces, while the flash configuration preserves operating logic across resets. The device can perform signal routing, timing generation, filtering, and event logging without relying on a separate programmable-logic device. Final medical use requires system-level risk analysis, electrical-safety compliance, and verification of every external interface rather than reliance on FPGA qualification alone.
Inirekomenda
Embedded System Management
The M2GL005-VFG256I can consolidate power sequencing, watchdog, interrupt aggregation, firmware-event logging, and peripheral-control functions into one embedded system-management device. Its 6,060 logic elements are appropriate for moderate control graphs, and 719,872 RAM bits can hold event queues and configuration state. Flash configuration permits autonomous operation immediately after reset, which helps reduce host-processor dependency. Design the power-management state machine around deterministic reset behavior, implement fail-safe outputs, and check all supply and I/O constraints against the manufacturer’s electrical specifications.
Inirekomenda
Aerospace and Defense Support Logic
The M2GL005-VFG256I can implement avionics-adjacent interface logic, data routers, sequencers, and secure-control functions where compact programmable logic is useful. The 161 I/O enable several parallel interfaces, while the 6,060 logic elements and 719,872 RAM bits support moderate datapath and state-machine workloads. Nonvolatile flash configuration allows the programmed function to be retained for rapid startup after power restoration. Deployment requires program-specific screening, reliability analysis, environmental verification, and controlled configuration management; component selection alone does not establish suitability for a flight-critical or defense qualification program.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for M2GL005-VFG256I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | M2GL005-VFG256 | M2GL005-VF256I | M2GL005-VF256 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-FPBGA, 14 x 14 mm | 256-FPBGA | 256-FPBGA | 256-FPBGA |
| Logic Elements | 6,060 | 6,060 | 6,060 | 6,060 |
| Total RAM | 719,872 bits | 719,872 bits | 719,872 bits | 719,872 bits |
| User I/O | 161 | 161 | 161 | 161 |
| Core Voltage Range | 1.14 V to 2.625 V | 1.14 V to 2.625 V | 1.14 V to 2.625 V | 1.14 V to 2.625 V |
| Temperature Designation | Industrial grade with I suffix | Base suffix; exact grade requires ordering-code confirmation | Industrial grade with I suffix | Base suffix; exact grade requires ordering-code confirmation |
| Configuration Memory | Flash-based nonvolatile configuration | Flash-based nonvolatile configuration | Flash-based nonvolatile configuration | Flash-based nonvolatile configuration |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
Pangunahing mga Pagkakaiba
- Industrial temperature designation (kumpara saM2GL005-VFG256)
- High I/O density in a compact package (kumpara saM2GL025-VFG256)
- Nonvolatile configuration for autonomous startup (kumpara saM2GL005-VF256)
Talaan ng Disenyo
Design the 1.14 V to 2.625 V core supply with sequencing and decoupling that satisfy the IGLOO2 family electrical requirements. Place the required bypass capacitors close to their assigned power balls, keep the return path continuous, and isolate noisy switching nodes from the core rail. Check the manufacturer’s power-up and power-down limits for every I/O state because externally driven pins can influence rail behavior during power transitions.
Use the 256-FPBGA mechanical drawing and ball-assignment guide to create the pad stack, solder mask, paste stencil, and assembly process. The 14 x 14 mm package has fine-pitch balls, so verify PCB capability and inspection coverage before release. Separate sensitive configuration or clock balls from noisy interfaces where practical, and provide uninterrupted ground-reference paths beneath the device.
Assign reusable I/O to the correct voltage banks and confirm every external interface’s signal integrity before layout sign-off. Differential or high-speed interfaces require manufacturer-recommended input impedance, trace geometry, and return-path arrangements. Avoid routing sensitive clocks across programmable logic boundaries and keep configuration-access pins away from sources of aggressive ESD or high-energy switching noise.
Do not infer compatibility from the M2GL005 label alone. Verify the complete ordering suffix, package code, temperature grade, voltage configuration, and ball assignments before substituting M2GL005-VFG256, M2GL005-VF256I, or M2GL005-VF256. Resource overflow can also occur even when logic count appears sufficient, so run synthesis and timing analysis with the actual constraints and reserve routing margin.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer automotive-grade datasheet is listed as a source, but no explicit compliance declaration for this exact ordering code was available in the referenced product information.