MAX232ACPE+ - RS-232 Transceiver, 5V, PDIP-16 | Maxim
MPN: MAX232ACPE+ ✗ اختتامِ زندگیMAX232ACPE+ جائزہ
An RS-232 transceiver is an interface IC that translates digital logic levels between a host or controller and a RS-232 cable. A driver converts TTL or CMOS signals into RS-232-level signals, while a receiver converts transmitted RS-232 levels back into logic levels. The MAX232ACPE+ is therefore placed between a digital system and an external serial connector, providing bidirectional communication through two driver and two receiver channels.
The manufacturer family description states that the MAX220–MAX249 devices are intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where ±12 V is not available. The +5 V-powered architecture supports systems whose logic supply is commonly 5 V. The verified data also identifies the part as a 2/2 transceiver and as a 5 V multichannel RS-232 driver/receiver. Exact electrical limits, slew rates, receiver thresholds, supply-current figures, and temperature limits are marked as DATA_NEEDED because they are not included in the supplied verified excerpts.
Typical uses include RS-232 console links, industrial-control serial ports, test equipment, embedded serial adapters, and legacy peripheral connections. The MAX232ACPE+ is appropriate when the board requires a conventional through-hole RS-232 interface and a 16-pin PDIP footprint. Designers should verify the complete datasheet pinout, charge-pump capacitor requirements, logic levels, data-rate limits, and ESD requirements before production release, because those values are not present in the supplied source snippets.
The key design consideration is to treat the MAX232ACPE+ as a physical-layer interface rather than a protocol converter. The application must handle framing, baud-rate configuration, parity, flow control, and connector wiring separately. External charge-pump capacitors, input/output protection, grounding, and cable routing remain important in a working RS-232 design. The MAX232ACPE+ is best selected when a 16-pin PDIP RS-232 transceiver with two drivers and two receivers is required and the existing board already matches the verified package and pin arrangement.
This page combines the verified distributor identity, manufacturer-family interface description, package information, and sourced cross-reference data. It does not infer unprovided electrical specifications, lifecycle claims, pricing values, compliance status, or complete pin assignments.
کے لیے ڈراپ اِن متبادل MAX232ACPE+ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX232ACPE+ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Product Type, Mounting Type, Package, ESD Protection, RoHS Status.
MAX232EPE+
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX232ACPE
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX232AC/D
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX232ACUE+
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX232ACWE-T
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX232ACPE+ تفصیلات
| Product Type | RS-232 transceiver |
| Driver Channels | 2 |
| Receiver Channels | 2 |
| سپلائی وولٹیج | +5 V |
| Interface Standards | EIA/TIA-232E and V.28/V.24 |
| پیکیج | 16-pin PDIP |
| ماؤنٹنگ ٹائپ | Through-hole |
| Manufacturer | Maxim Integrated |
| Product Description | +5 V-powered multichannel RS-232 drivers/receivers |
| Driver/Receiver Count | 2/2 |
| RoHS اسٹیٹس | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
MAX232ACPE+ 16-pin pdip پن کنفیگریشن گائیڈ
MAX232ACPE+ (16-pin pdip پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX232ACPE+.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MAX232ACPE+ کے لیے موزوں ہے 6 ایپلیکیشنs: RS-232 Console Interface, Industrial Control Serial Port, Test and Measurement Equipment, Embedded Serial Adapter, Legacy Peripheral Connectivity, Battery-Powered RS-232 Equipment.
RS-232 Console Interface
MAX232ACPE+ fits a console connection between a 5 V controller and an RS-232 terminal because it provides two driver channels and two receiver channels in a 16-pin PDIP package. The MAX220–MAX249 family is intended for EIA/TIA-232E and V.28/V.24 interfaces where ±12 V is unavailable. Place the transceiver between the controller UART and the connector, then use the device’s charge-pump network and logic-side supply exactly as specified by the manufacturer datasheet. The supplied sources verify the 2/2 channel count and +5 V-powered concept, but exact logic thresholds, data rate, and capacitor values remain DATA_NEEDED.
تجویز کردہ
Industrial Control Serial Port
The MAX232ACPE+ can provide a conventional RS-232 physical layer for industrial equipment that retains a 5 V logic supply and uses a through-hole interface IC. Its two transmitters and two receivers support multiple RS-232 signal paths, while the family description confirms suitability for V.28 and V.24-style communications. The circuit must still handle protocol timing, connector pin assignment, cable return, and protection. Verify the complete PDIP pinout and operating-temperature limits because those details are not included in the supplied excerpts.
تجویز کردہ
Test and Measurement Equipment
A MAX232ACPE+ is appropriate for legacy test equipment that exposes a 5 V RS-232 service port. The transceiver bridges the instrument’s digital control logic and an external PC or controller without requiring separate ±12 V supplies, which the verified MAX220–MAX249 description specifically highlights. Use the driver outputs toward the RS-232 connector and receiver inputs toward the instrument logic. Because the supplied sources do not state data rate, ESD level, receiver threshold, or charge-pump capacitor recommendations, those values must be validated before layout signoff.
تجویز کردہ
Embedded Serial Adapter
MAX232ACPE+ can terminate an older RS-232 link on an embedded controller board that uses 5 V digital logic and has a suitable PDIP footprint. The two-driver/two-receiver arrangement is useful when the system needs more than one serial signal, while the +5 V-powered family architecture simplifies systems without ±12 V rails. The board still needs connector protection, defined grounding, and verified charge-pump capacitors. Do not substitute a surface-mount alternative without confirming that the mechanical footprint and pin functions match.
تجویز کردہ
Legacy Peripheral Connectivity
The MAX232ACPE+ is useful when a modern controller must communicate with a legacy peripheral through RS-232 rather than a modern differential bus. The MAX220–MAX249 family description specifically targets EIA/TIA-232E and V.28/V.24 interfaces, and the verified listing confirms two transmit and two receive channels. Designers should implement the UART protocol and connector wiring separately from the transceiver’s physical-layer function. Confirm the exact MAX232ACPE+ pinout, temperature grade, and external capacitor requirements before release.
تجویز کردہ
Battery-Powered RS-232 Equipment
The MAX220–MAX249 family description highlights applications where ±12 V is unavailable, making MAX232ACPE+ a candidate for battery-powered or single-supply RS-232 equipment. The +5 V-powered transceiver can sit between a low-voltage digital subsystem and an RS-232 port, avoiding a separate dual-rail driver supply. Actual battery suitability depends on supply-current limits, shutdown behavior, and standby consumption, none of which are included in the supplied data. Those values must be checked in the complete manufacturer datasheet before claiming low-power operation.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MAX232ACPE+ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MAX232EPE+ | MAX232ACPE | MAX232AC/D | MAX232ACUE+ | MAX232ACWE-T |
|---|---|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
اہم امتیازی خصوصیات
- Verified two-driver/two-receiver configuration (بمقابلہMAX232EPE+)
- Higher stated data-rate comparison (بمقابلہMAX232EPE+)
- Single-supply RS-232 positioning (بمقابلہMAX232ACPE)
- Through-hole package alignment (بمقابلہMAX232AC/D)
- Family interface compatibility (بمقابلہSP3232EB)
ڈیزائن نوٹس
Because the verified package is a 16-pin PDIP, preserve through-hole footprint clearance and route the RS-232 connector, logic-side UART, and protection network around the transceiver. Confirm the exact pin assignment from the manufacturer datasheet before fabrication; the supplied excerpts do not provide a complete numbered pinout, so a generic MAX232 diagram should not be copied without verification.
Treat the MAX232ACPE+ as a +5 V RS-232 transceiver and decouple the supply close to the device using the manufacturer’s recommended capacitor network. The MAX220–MAX249 family uses charge-pump circuitry for single-supply RS-232 operation, but the exact external capacitor values and tolerances are DATA_NEEDED in the supplied data. Do not select capacitors from generic RS-232 examples without checking the exact datasheet.
Do not assume that MAX232ACPE+, MAX232EPE+, MAX232AC/D, MAX232ACUE+, or MAX232ACWE-T are automatically interchangeable. The supplied comparison data reports 200 kb/s versus 120 kb/s and 0 C versus -40 C for MAX232ACPE+ versus MAX232EPE+, while the other source excerpts explicitly require package and pinout checks. Validate suffix-specific ratings and the complete pinout before substitution.
Keep the RS-232 connector, cable entry, protection components, and transceiver interface path physically separated from sensitive analog or high-speed digital circuits. The transceiver handles the physical RS-232 levels, not cable shielding, grounding, or protocol framing. Validate return-path continuity and connector pin assignments in the system schematic and layout.
تعمیل کی معلومات
The supplied verified data does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. EIA/TIA-232E and V.28/V.24 are interface application references from the manufacturer-family description, not independent compliance certifications.