Texas Instruments

MAX3221IDBE4 - 250kbps Single RS-232 Transceiver | Texas Instruments

MPN: MAX3221IDBE4 ✓ सक्रिय
3 V to 5.5 V Vdss 16-pin SSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX3221IDBE4 अवलोकन

Texas Instruments MAX3221IDBE4 is a single-channel RS-232 line driver and receiver operating from 3 V to 5.5 V, supporting data rates up to 250 kbps with ±15 kV ESD protection. The device is packaged in a 16-pin SSOP. It provides one transmitter and one receiver for compact serial-interface designs where both RS-232 signal conditioning and board-space efficiency are important.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts received RS-232 levels back into logic levels. It belongs to the RS-232 transceiver class of interface ICs, with the broader hierarchy progressing from transceiver to interface controller, communication interface, and semiconductor. The MAX3221 integrates a dual charge-pump circuit with the driver and receiver, reducing the external component count required for a working RS-232 port.

The 3 V to 5.5 V supply range allows operation in systems powered from 3.3 V or 5 V rails. Its 250 kbps data-rate capability suits legacy serial equipment, industrial control links, configuration ports, and service interfaces. Dedicated enable control can place the driver in a reduced-drive state when the associated receiver is not needed, while the integrated charge pump provides the RS-232 level translation required by the standard interface.

The ±15 kV ESD protection rating applies to the RS-232 serial-port connection pins and ground, adding valuable protection for equipment that may be connected to external cabling. ESD resilience is particularly important in industrial and communications equipment where a disconnected or partially installed cable can expose a port to electrostatic discharge. The 16-pin SSOP footprint also supports compact layouts without requiring a large connector-side interface package.

Typical uses include single-port RS-232 links in industrial controllers, test equipment, data acquisition systems, configuration and programming ports, and service interfaces for embedded products. The part is most appropriate where one bidirectional serial channel is needed, the data rate is below 250 kbps, and a 3.3 V or 5 V system supply is available. Designs requiring several RS-232 ports normally favor a multichannel transceiver instead.

A key implementation consideration is to place charge-pump capacitors, supply bypassing, and the RS-232 connector interface components exactly as shown in the manufacturer’s recommended layout. Keep connector-side traces short, provide a low-impedance ground return, and avoid routing sensitive signals alongside RS-232 outputs. These practices reduce radiated emissions, susceptibility to cable-borne noise, and ESD-related stress concentration.

This page combines the key MAX3221IDBE4 operating specifications, verified package information, drop-in replacement guidance, application-focused design guidance, and a parameter comparison for faster engineering selection. It is intended to help engineers determine whether the single-channel architecture, 250 kbps limit, SSOP footprint, and integrated ESD protection fit a particular RS-232 interface.

के लिए ड्रॉप-इन विकल्प MAX3221IDBE4 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX3221IDBE4 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Charge-Pump Architecture, ESD Protection, Product Type.

Texas Instruments
Charge-Pump Architecture: Dual charge-pump circuit
ESD Protection: ±15 kV HBM on serial-port connection pins, including GND
Product Type: Single-channel RS-232 line driver and receiver
इसके साथ तुलना करें MAX3221IDBE4 →

MAX3221IDBR

✅ ड्रॉप-इन
Texas Instruments
📦 SSOP-16
Single-channel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · ±15 kV HBM on serial-port connection pins, including GND · 1 µA · 4 × 0.1 µF

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3221EAE+T

✅ ड्रॉप-इन
Analog Devices
📦 SSOP-16
RS-232 transceiver · 1 driver · 1 receiver · 3 V to 5.5 V · 16-pin SSOP · Surface mount · Approximately 1 µA · ±15 kV

कीमत के लिए संपर्क करें

डेटाशीट देखें →

SN75C3221DBE4

✅ ड्रॉप-इन
📦 SSOP-16
Retains the single-channel RS-232 transceiver function and SSOP-16 footprint; channel-count difference is 0%.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ICL3221CVZ-T

✅ ड्रॉप-इन
📦 SSOP-16
Cross-brand single-channel RS-232 transceiver in the same SSOP-16 package class; channel-count difference is 0%.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ICL3221EIAZ-T

✅ ड्रॉप-इन
📦 SSOP-16
Cross-brand single-channel RS-232 transceiver with the same SSOP-16 footprint; channel-count difference is 0%.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ICL3221EIAZ

✅ ड्रॉप-इन
📦 SSOP-16
Cross-brand single-channel RS-232 transceiver in the same SSOP-16 package class; channel-count difference is 0%.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX3221IDBE4 विशेषताएं

Product Type Single-channel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Drivers 1
Number of Receivers 1
ESD Protection ±15 kV
ऑपरेटिंग तापमान रेंज -40°C to +85°C
पैकेज 16-pin SSOP
माउंटिंग प्रकार Surface mount
Charge-Pump Architecture Dual charge pump
Driver Enable Dedicated enable pin
Interface Standard RS-232
ESD Protected Pins Serial-port connection pins, including ground

MAX3221IDBE4 16-pin ssop पिन कॉन्फ़िगरेशन गाइड

MAX3221IDBE4 (16-pin ssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX3221IDBE4 के लिए 16-pin ssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX3221IDBE4.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX3221IDBE4 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Controller Configuration Port, Test and Measurement Equipment, Data Acquisition System, Embedded Equipment Service Interface, Point-of-Sale and Peripheral Interface, Security and Access-Control Equipment.

🏭

Industrial Controller Configuration Port

The MAX3221IDBE4 is appropriate for a controller that exposes one RS-232 configuration or maintenance port. Its 3 V to 5.5 V supply range allows operation beside either 3.3 V or 5 V logic, while the single driver and receiver provide one bidirectional serial channel. The 250 kbps maximum rate is more than sufficient for parameter uploads, diagnostic commands, and service traffic. The ±15 kV ESD protection on the serial connection pins strengthens the interface against charged cable contact. Place the input and output capacitors close to the device and route the connector ground directly to the interface ground to maintain signal integrity and improve electrostatic-discharge return paths.

🔧

Test and Measurement Equipment

The MAX3221IDBE4 can provide a legacy serial control connection on test and measurement instruments that still use RS-232. One channel is adequate for remote commands, calibration results, or instrument-status reporting, and the 250 kbps limit supports the slow serial links commonly found in older laboratory equipment. Its integrated dual charge pump reduces the discrete capacitor burden associated with producing RS-232 levels from a 3.3 V or 5 V supply. The ±15 kV ESD protection is useful when users connect and disconnect external test leads. Maintain a short return path to the connector ground and separate the interface from sensitive measurement traces to limit coupling.

📡

Data Acquisition System

The MAX3221IDBE4 is suitable for commissioning and service communication in a compact data-acquisition system. The transceiver provides one receiver for incoming commands and one driver for responses or collected data, making it appropriate where telemetry is exchanged sequentially rather than through multiple simultaneous ports. Its 250 kbps rate supports many configuration and diagnostic protocols, while the 3 V to 5.5 V supply range permits direct use in mixed-voltage embedded systems. ESD protection of ±15 kV on the connection pins adds resilience for field-installed equipment. Use a continuous ground reference between the board and connector, and place supply and charge-pump capacitors according to the recommended layout.

🖥️

Embedded Equipment Service Interface

The MAX3221IDBE4 provides a compact service port for embedded systems that need one RS-232 channel for firmware loading, diagnostics, or configuration. A single-channel arrangement avoids the board area and power burden of a multichannel transceiver when only one service connector is required. The part operates from 3 V to 5.5 V and accepts data rates up to 250 kbps, covering common legacy boot and service protocols. Its integrated dual charge pump generates the required signal levels without a separate DC inverter, while ±15 kV ESD protection improves robustness at a user-accessible connector. Keep the port on a protected ground region and follow the exact capacitor values and enable configuration shown in the manufacturer documentation.

🛒

Point-of-Sale and Peripheral Interface

The MAX3221IDBE4 can support a legacy point-of-sale peripheral or service terminal that communicates through one RS-232 port. The 250 kbps data rate is suitable for receipt printers, scanners, scales, and configuration tools using traditional serial protocols, while the 3 V to 5.5 V supply range integrates easily with modern embedded controllers. A dedicated enable function allows the transmitter to be managed when the port is not active, helping avoid unnecessary signal activity. The ±15 kV ESD rating protects the connection pins in retail equipment where cables are handled frequently. Route the interface away from display and switching-power noise, and preserve a low-impedance chassis-to-board ground path.

🔐

Security and Access-Control Equipment

The MAX3221IDBE4 is useful for access-control terminals and security equipment that retain an RS-232 port for diagnostics, credential readers, or configuration. One bidirectional channel is sufficient for command-and-response protocols operating below 250 kbps. The device’s ±15 kV ESD protection is especially valuable around door controllers and other installations where connected cables may receive electrostatic discharge. Its 3 V to 5.5 V operating range supports both legacy 5 V interfaces and modern 3.3 V controller platforms. Use the enable input to control the driver during inactive periods, verify the logic polarity in the design, and keep the connector ground bonded near the interface entry point to reduce common-mode noise.

अनुशंसित उत्पादों का सारांश

MAX3221IDBR Texas Instruments उपयोग में: Industrial Controller Configuration Port, Data Acquisition System, Security and Access-Control Equipment SN75C3221DBE4 Texas Instruments single-channel RS-232 alternative उपयोग में: Industrial Controller Configuration Port, Point-of-Sale and Peripheral Interface MAX3221EAE+T Analog Devices उपयोग में: Test and Measurement Equipment, Embedded Equipment Service Interface ICL3221CVZ-T Cross-brand RS-232 transceiver alternative उपयोग में: Test and Measurement Equipment, Point-of-Sale and Peripheral Interface ICL3221EIAZ-T Cross-brand single-channel RS-232 alternative उपयोग में: Data Acquisition System, Security and Access-Control Equipment ICL3221EIAZ Cross-brand RS-232 service-port alternative उपयोग में: Embedded Equipment Service Interface
What are the key specifications of MAX3221IDBE4 that engineers should know?
The MAX3221IDBE4 is a 3 V to 5.5 V, single-channel RS-232 transceiver with one driver, one receiver, operation up to 250 kbps, ±15 kV ESD protection, and a 16-pin SSOP package. According to the Texas Instruments MAX3221 product page, it uses a dual charge-pump architecture for level translation. These specifications make it suitable for compact, low- or moderate-speed serial links that require integrated protection.
What is the operating voltage of MAX3221IDBE4?
The MAX3221IDBE4 operates from 3 V to 5.5 V. According to the Texas Instruments MAX3221 product page, this range supports both 3.3 V and 5 V system environments. The supply voltage must remain within the specified operating range because the internal charge-pump circuitry generates the bipolar RS-232 signal levels used by the driver.
How fast can MAX3221IDBE4 transmit RS-232 data?
The MAX3221IDBE4 supports data rates up to 250 kbps. The Texas Instruments MAX3221 product page identifies the device as a single-channel 250 kbps RS-232 line driver and receiver. This rate is appropriate for legacy serial ports, equipment configuration links, and industrial service interfaces, but it is not intended for high-speed differential serial standards.
What ESD protection does MAX3221IDBE4 provide?
The MAX3221IDBE4 provides ±15 kV ESD protection on the RS-232 serial-port connection pins, including ground. According to the Texas Instruments MAX3221 product page, this protection helps reduce the risk of damage when an external cable exposes the interface to electrostatic discharge. It does not eliminate the need for sound grounding, connector design, and appropriate system-level ESD procedures.
Where can I download the MAX3221IDBE4 datasheet PDF?
The official MAX3221 product page on Texas Instruments provides datasheet access, ordering information, parameters, and quality documentation. Search for MAX3221IDBE4 within the product-page support materials to select the correct package and temperature option. The manufacturer datasheet should also be used to assign every pin and to follow the recommended charge-pump capacitor and layout configuration.
Where can I find the MAX3221IDBE4 pinout?
The MAX3221IDBE4 pinout is defined in the pin-description table of the Texas Instruments MAX3221 manufacturer datasheet. Use that table when assigning the 16 SSOP terminals for VCC, ground, charge-pump capacitors, driver outputs, receiver inputs, enable control, and shutdown control. The exact numbered pin assignments should be copied directly from the datasheet rather than inferred from another member of the MAX3221 family.
Is MAX3221IDBE4 suitable for industrial RS-232 equipment?
The MAX3221IDBE4 is well suited to industrial serial equipment when the interface speed does not exceed 250 kbps and the system operates from 3 V to 5.5 V. Its ±15 kV ESD protection adds robustness for cable-connected ports. The -40°C to +85°C operating range also supports industrial temperature requirements, although the complete product still needs normal surge, grounding, and enclosure validation.
Can MAX3221IDBE4 replace MAX3221IDBR?
Yes, the MAX3221IDBR is identified by the manufacturer part data as a direct replacement with matching terminals, package, 250 kbps operation, and 3 V to 5.5 V supply. Both use the SSOP-16 footprint, so an existing board can generally use the MAX3221IDBR without a footprint change. Final substitution should still follow the manufacturer’s ordering table and pin-configuration details for the exact suffix.
What can replace MAX3221IDBE4?
The MAX3221IDBR, MAX3221EAE+T, SN75C3221DBE4, ICL3221CVZ-T, ICL3221EIAZ-T, and ICL3221EIAZ are the closest reviewed replacements for the MAX3221IDBE4. The listed alternatives retain the single-channel RS-232 transceiver function and use the same 16-pin SSOP class of package. Verify enable behavior, electrical limits, temperature grade, and charge-pump capacitor values before production substitution.
Is MAX3221IDBE4 the same as MAX3221EAE+T?
The MAX3221EAE+T is a compatible replacement candidate for the MAX3221IDBE4 because both implement a single-channel RS-232 transceiver in a 16-pin SSOP package. Their primary differences concern ordering options and associated device specifications rather than the basic conversion function. Confirm the exact operating limits, temperature range, enable polarity, and charge-pump values in the manufacturer documentation for the selected suffix.
When should I choose MAX3221IDBE4 over an ICL3221 replacement?
Choose the MAX3221IDBE4 when you want a Texas Instruments single-channel RS-232 solution specified for 3 V to 5.5 V operation, up to 250 kbps, and ±15 kV ESD protection in SSOP-16. An ICL3221 replacement is appropriate when its exact electrical ratings, shutdown behavior, temperature grade, and pin behavior meet the design requirements and the existing board layout is confirmed compatible.
Is MAX3221IDBE4 suitable for a 3.3 V RS-232 interface?
Yes, the MAX3221IDBE4 can operate from a 3.3 V supply because its specified operating range is 3 V to 5.5 V. According to the Texas Instruments MAX3221 product page, the device includes a dual charge-pump circuit, allowing it to produce RS-232-compatible levels from a low-voltage supply. Confirm the charge-pump capacitor values and recommended layout before deployment.
Where can I buy MAX3221IDBE4 online?
Use the Request a Quote form on this page to request the MAX3221IDBE4 from XAIPART and confirm current commercial availability, quantity, and lead time. The exact MPN is a 1-channel RS-232 transceiver in a 16-pin SSOP package. Providing the required quantity, target quantity breaks, and delivery destination allows the request to be reviewed against the appropriate supply channel.
What is the price of MAX3221IDBE4?
Current pricing for the MAX3221IDBE4 should be obtained through the Request a Quote form on this page. The part is identified by the exact manufacturer ordering code MAX3221IDBE4, including its 16-pin SSOP package and device-temperature suffix. A quote request confirms the current commercial terms without relying on a stale listing price or a family-level price.
What is the lead time and stock status for MAX3221IDBE4?
Current stock, minimum order quantity, and lead time for the MAX3221IDBE4 should be confirmed through the Request a Quote form on this page. The Texas Instruments MAX3221 family is represented by an active manufacturer product page, but that does not by itself establish current inventory for every quantity. Include the required quantity and production schedule when requesting the order quotation.
What is the best cross-brand equivalent for MAX3221IDBE4?
The ICL3221CVZ-T is a reviewed cross-brand replacement candidate for the MAX3221IDBE4 because it provides a compatible single-channel RS-232 transceiver function in the same 16-pin SSOP package class. The ICL3221EIAZ-T and ICL3221EIAZ are additional options. Final qualification should compare enable polarity, shutdown behavior, operating temperature, ESD rating, and charge-pump values.

के लिए इंजीनियरिंग संदर्भ डेटा MAX3221IDBE4 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MAX3221IDBE4 when a compact system needs exactly one RS-232 channel, operates from 3 V to 5.5 V, and requires data rates up to 250 kbps. Its SSOP-16 package, dual charge pump, dedicated enable control, and ±15 kV ESD protection suit industrial, service, and configuration ports. The MAX3221IDBR is the preferred reuse option when identical 250 kbps performance, supply range, and SSOP-16 construction are required. Consider the MAX3221EAE+T or SN75C3221DBE4 only after confirming their exact ratings and lifecycle requirements. Cross-brand ICL3221CVZ-T, ICL3221EIAZ-T, and ICL3221EIAZ candidates can support sourcing flexibility, but enable polarity, shutdown behavior, temperature grade, ESD rating, and capacitor values must be compared. For multiple ports, choose a multichannel transceiver instead rather than adding several single-channel devices.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX3221IDBR MAX3221EAE+T SN75C3221DBE4 ICL3221CVZ-T ICL3221EIAZ-T
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Microchip Technology Microchip Technology
Package SSOP-16 SSOP-16 SSOP-16 SSOP-16 SSOP-16 SSOP-16

मुख्य विशेषताएँ

  • Directly reusable MAX3221 interface implementation (बनामMAX3221IDBR)
  • Integrated protection for connector-side pins (बनामMAX3221EAE+T)
  • Single-channel footprint reduces board area (बनामICL3221CVZ-T)

डिज़ाइन नोट्स

Place the MAX3221IDBE4 close to the RS-232 connector and follow the manufacturer’s reference layout for input, output, and charge-pump capacitors. Keep the connector ground and IC ground connected through a low-impedance path, and route differential RS-232 traces as a short pair. Excessively long or widely separated conductor traces can increase radiated emissions and make the interface more susceptible to externally coupled noise.

Do not treat the MAX3221IDBE4 as a general-purpose logic-level UART transceiver. The driver output must connect to an RS-232 receiver, and the receiver input must be exposed to RS-232 bipolar levels rather than TTL signals. Also confirm the enable polarity and distinguish shutdown from driver enable. Incorrect logic interpretation or an inappropriate cable connection can prevent reliable communication even when the supply voltage and decoupling are correct.

RS-232 driver outputs are high-voltage, fast-edge signals capable of coupling into nearby circuitry. Keep the connector-side section physically separated from analog, clock, and sensitive digital traces, and avoid placing it directly beneath high-speed switching nodes. A solid ground plane, short return path, and correctly positioned charge-pump capacitors reduce common-mode displacement and radiated coupling around the interface.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer product information identifies the MAX3221 family and its RS-232 interface characteristics. RoHS, REACH, lead-free, halogen-free, and conflict-mineral declarations are not stated in the cited material and therefore remain unconfirmed.

डेटा सत्यापन तिथि: 2026-11-09 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX3221IDBE4 datasheet MAX3221IDBE4 pinout MAX3221IDBE4 datasheet pdf MAX3221IDBE4 equivalent MAX3221IDBE4 replacement MAX3221IDBE4 drop-in replacement MAX3221IDBE4 SSOP-16 MAX3221IDBE4 250kbps MAX3221IDBE4 ESD protection Texas Instruments MAX3221IDBE4 MAX3221IDBE4 vs MAX3221IDBR MAX3221IDBE4 price MAX3221IDBE4 stock MAX3221IDBE4 RS-232 transceiver MAX3221IDBE4 industrial interface

संबंधित कंपोनेंट्स और शब्द

Texas Instruments MAX3221IDBE4 MAX3221IDBR MAX3221EAE+T SN75C3221DBE4 ICL3221CVZ-T ICL3221EIAZ-T ICL3221EIAZ RS-232 transceiver RS-232 line driver RS-232 receiver interface IC communication interface semiconductor charge-pump circuit dual charge pump ESD protection ±15 kV ESD protection 250 kbps 3 V to 5.5 V SSOP-16 SSOP package family surface-mount package industrial controller data acquisition system point-of-sale peripheral access-control equipment
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें