Analog Devices

MAX3232CSE+T - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232CSE+T ✓ सक्रिय
3.0V to 5.5V Vdss 16-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX3232CSE+T अवलोकन

The Analog Devices MAX3232CSE+T is a 3.0V to 5.5V, low-power, true RS-232 transceiver that supports data rates up to 1Mbps and is packaged in a 16-pin SOIC. It provides two transmit channels and two receive channels, making it suitable for compact serial-console, industrial-control, instrumentation, and point-to-point data links.

A true RS-232 transceiver is an interface circuit that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic. The MAX3232 combines receiver and driver functions in one package, using a dual charge-pump arrangement to generate the bipolar voltage required by true RS-232 operation. This places it within the hierarchy of interface ICs, transceiver ICs, communication interfaces, and semiconductors.

The MAX3232CSE+T operates from 3.0V to 5.5V and supports signaling rates as high as 1Mbps. According to the Analog Devices MAX3232 manufacturer datasheet, the family is designed for low-power operation and true RS-232 performance, including operation from a supply below the traditional 5V-only operating regime. The integrated charge pumps allow the device to operate without an external negative supply rail.

The MAX3232CSE+T uses four small external 0.1µF charge-pump capacitors, as described by the manufacturer data sheet. Its transmitter implementation supports low-power operation while maintaining compliant RS-232 output levels. The two-driver, two-receiver organization permits one link to carry command or control information in each direction, although driver and receiver enable functions depend on the exact family configuration documented in the manufacturer data sheet.

Typical uses include RS-232 service ports, programmable-instrument interfaces, industrial controllers, laboratory equipment, and embedded systems that need a compact dual-channel RS-232 connection. The 16-pin SOIC package supports conventional surface-mount assembly and is narrower than a standard through-hole DB-25 connector footprint. PCB layout should preserve short charge-pump capacitor connections and provide adequate return paths for the high-voltage driver outputs.

Designers should use the manufacturer pin-description table when assigning tracks because exact ENABLE, VCC, ground, and charge-pump connectivity must follow the package orientation. Input and output protection should be added where cables can exceed the device's rated RS-232 voltage. This page combines the manufacturer's operating limits, package information, replacement analysis, and application guidance to support design and sourcing decisions.

के लिए ड्रॉप-इन विकल्प MAX3232CSE+T — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX3232CSE+T (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Maximum Data Rate, Device Type, External Charge-Pump Capacitors, Operating Temperature Range.

Analog Devices
Package: 16-pin Narrow SOIC (SOIC-N-16)
Operating Temperature Range: 0 °C to +70 °C (commercial C-grade)
इसके साथ तुलना करें MAX3232CSE+T →
Maxim Integrated
Package: 16-SOIC narrow
Maximum Data Rate: Up to 1Mbps
Device Type: Dual RS-232 transceiver
इसके साथ तुलना करें MAX3232CSE+T →
Maxim Integrated
Package: 16-pin TSSOP
Maximum Data Rate: 1 Mbps
Device Type: 2/2 RS-232 transceiver
इसके साथ तुलना करें MAX3232CSE+T →
Analog Devices
Package: 16-SOIC
Maximum Data Rate: 1 Mbps
External Charge-Pump Capacitors: 4 x 0.1 uF
इसके साथ तुलना करें MAX3232CSE+T →
Analog Devices
Maximum Data Rate: Up to 1 Mbps
Device Type: RS-232 transceiver
इसके साथ तुलना करें MAX3232CSE+T →
Maxim Integrated
Package: 16-SOIC (NSOIC, 0.150 inch)
इसके साथ तुलना करें MAX3232CSE+T →

MAX3232ECSE+

✅ ड्रॉप-इन
Analog Devices
📦 16-pin SOIC
2 transmitters and 2 receivers · True RS-232 · 3.0 V to 5.5 V · 1 Mbps · 4 x 0.1 uF · 16 pins · 16-SOIC · Surface mount

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232ESE+

✅ ड्रॉप-इन
Analog Devices
📦 16-pin SOIC
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · Up to 1 Mbps · RS-232 · 16-pin SOIC

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232CUE+

✅ ड्रॉप-इन
Maxim Integrated
📦 16-pin SOIC
2/2 RS-232 transceiver · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · TTL/CMOS · Dual · 4 capacitors, 0.1 µF each

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232CSE+T विशेषताएं

Product Type RS-232 transceiver
Transceiver Configuration 2 transmit channels and 2 receive channels
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
Interface Standard True RS-232
पैकेज 16-pin SOIC
माउंटिंग प्रकार Surface mount
External Charge-Pump Capacitors 4 × 0.1µF
Number of Drivers 2
Number of Receivers 2
Negative Supply Requirement None

MAX3232CSE+T 16-pin soic पिन कॉन्फ़िगरेशन गाइड

MAX3232CSE+T (16-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX3232CSE+T के लिए 16-pin soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX3232CSE+T.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX3232CSE+T के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Controller RS-232 Port, Programmable Instrument Control, Embedded Serial Console, Laboratory Measurement Equipment, Point-to-Point Data Terminal, Secure Equipment Configuration Port.

🏭

Industrial Controller RS-232 Port

The MAX3232CSE+T fits an industrial controller that needs a compact bidirectional serial interface for configuration equipment or a local operator terminal. Its 3.0V-to-5.5V supply range permits operation across common 3.3V and 5V control rails, while the 1Mbps capability provides more margin than many low-speed RS-232 links require. Two transmitters and two receivers support command, status, and diagnostic channels within one package. The integrated charge pumps also eliminate the need for a negative supply rail. Place the four 0.1µF capacitors close to their charge-pump pins, and confirm the device's exact operating-temperature rating for the enclosure. Add suitable input protection when the cable exits the controlled equipment enclosure.

🖥️

Programmable Instrument Control

The MAX3232CSE+T can connect a controller, test sequencer, or embedded computer to programmable laboratory and test equipment over RS-232. The 1Mbps maximum rate supports fast command polling, while the two receive channels can accept separate status or measurement signals. Its true RS-232 interface avoids an external negative supply, which simplifies low-voltage embedded systems operating from 3.0V to 5.5V. The 16-pin SOIC also supports compact surface-mount assemblies where a connector-mounted interface would consume excessive board area. Review the manufacturer's pin table and enable logic before connecting asynchronous control lines, and ensure the cable length does not degrade the selected baud rate.

🔧

Embedded Serial Console

The MAX3232CSE+T is suitable for an embedded system that retains a wired service or configuration console while using a compact PCB footprint. A 3.0V-to-5.5V operating range aligns with both 3.3V processors and 5V service interfaces, and the 1Mbps capability covers common UART baud rates with substantial timing margin. The two-driver and two-receiver arrangement can serve a primary command port plus a secondary status channel. Use the manufacturer package drawing to route the exposed signals and keep the four 0.1µF charge-pump capacitors within a short loop. For exposed product ports, add appropriately rated surge and ESD protection rather than relying solely on the transceiver.

📟

Laboratory Measurement Equipment

The MAX3232CSE+T can serve as the RS-232 interface in laboratory measurement equipment that exchanges commands and captured data with a host computer. A maximum rate of 1Mbps allows the interface to handle measurement bursts without forcing a separate high-speed differential interface into a compact instrument. The integrated dual charge-pump design operates without a negative rail, while the 16-pin SOIC leaves room for the instrument's analog and processing circuitry. Decouple the supply locally and preserve the manufacturer's recommended charge-pump capacitor arrangement. For bench equipment connected to user cables, evaluate external protection and grounding carefully to prevent surge events or ground-potential differences from reaching the transceiver pins.

🌐

Point-to-Point Data Terminal

The MAX3232CSE+T supports a point-to-point RS-232 link between two equipment locations where full-duplex communication, a compact footprint, and operation from 3.0V to 5.5V are important. Two transmit and two receive channels can carry independent streams or provide command and telemetry paths. The 1Mbps capability is suitable for short, well-controlled cable runs, while true RS-232 levels provide compatibility with conventional serial equipment. Keep the charge-pump section away from sensitive analog areas and route driver outputs and receiver inputs to minimize coupling. Verify the actual connector wiring, ground reference, cable shielding, and electrical protection at the board edge before field deployment.

📷

Secure Equipment Configuration Port

The MAX3232CSE+T can provide a service-only configuration path in security or surveillance equipment where technicians connect temporarily for setup and diagnostics. The low-power 3.0V-to-5.5V operation permits the interface to remain within a compact mixed-voltage design, and the 1Mbps maximum rate is more than adequate for firmware upload, configuration transfer, and short diagnostic exchanges. The two receive channels can support separate command and acknowledgment paths, while the dual transmitters can drive more than one connected receiver when the wiring permits. Place protection components at the external connector, maintain a defined signal ground, and use the manufacturer's pin-description table to confirm enable polarity before finalizing the layout.

Where can I download the MAX3232CSE+T datasheet PDF?
The MAX3232CSE+T data sheet is available through the official Analog Devices MAX3232 product page at https://www.analog.com/en/products/max3232.html. The manufacturer describes the MAX3232 family as a 3.0V to 5.5V, low-power, true RS-232 transceiver supporting rates up to 1Mbps. Use the manufacturer's pin-description table, electrical-characteristics table, and typical charge-pump circuit when assigning PCB connections or validating signal levels.
What is the operating voltage of MAX3232CSE+T?
The MAX3232CSE+T operates from 3.0V to 5.5V. According to the Analog Devices MAX3232 manufacturer datasheet, this range allows operation from 3V and 5V supply environments while supporting true RS-232 signal levels. The exact power consumption varies with supply voltage, channel activity, and external load, so the electrical-characteristics table should be consulted for the final current budget.
What is the maximum data rate of MAX3232CSE+T?
The MAX3232CSE+T supports a maximum data rate of 1Mbps. The Analog Devices product page identifies the MAX3232 as a low-power, true RS-232 transceiver for 3.0V to 5.5V operation with performance up to 1Mbps. This rate applies to compatible RS-232 links whose cable length, driver loading, receiver thresholds, and signal timing remain within the system design limits.
Is MAX3232CSE+T the same as MAX3232CSE-T?
MAX3232CSE+T and MAX3232CSE-T identify closely related ordering forms of the same MAX3232 device, with the MAX3232CSE+T listing explicitly providing the tape-and-reel order code. The important technical identity is the MAX3232CSE electrical configuration and 16-pin SOIC package. Engineers should confirm reel orientation, carrier quantity, and the manufacturer's ordering guide before treating the suffix as interchangeable procurement notation.
What can replace MAX3232CSE+T?
The closest documented replacement is the MAX3232ECSE+ because it retains the MAX3232 family identity, 16-pin SOIC arrangement, 3.0V-to-5.5V supply range, and 1Mbps transceiver class. Before substitution, compare the exact enable-pin configuration, receiver and driver levels, operating-temperature grade, charge-pump capacitor requirements, and ESD rating against the manufacturer data sheet for both parts.
What is the best MAX3232ESE+ equivalent for MAX3232CSE+T?
MAX3232ESE+ is a same-family MAX3232 option identified as a comparable 16-pin SOIC RS-232 transceiver. It should be treated as a candidate rather than an unconditional substitution because temperature grade and selected enable functions may differ. Verify pin names, shutdown behavior, supply limits, data rate, and external capacitor values in the Analog Devices data sheets before releasing a replacement for production.
When should I choose MAX3232CSE+T over MAX3232ECSE+?
Choose MAX3232CSE+T when a 3.0V-to-5.5V, 1Mbps, dual-driver and dual-receiver RS-232 transceiver in a 16-pin SOIC matches the required electrical and environmental limits. Choose MAX3232ECSE+ when its documented temperature grade or other device characteristics better match an industrial environment. Both options require final verification of enable logic and all package-pin assignments.
Is MAX3232CSE+T suitable for an industrial control interface?
The MAX3232CSE+T can suit an industrial RS-232 link when its 3.0V-to-5.5V supply range and 1Mbps data rate meet the machine's communication requirements. For industrial deployment, also verify the exact operating-temperature rating, isolation strategy, cable length, grounding method, surge exposure, and ESD requirements. External protection may be necessary when the RS-232 port connects to long field cables.
How do I find the MAX3232CSE+T pinout?
Use the pin-description table and package drawing in the Analog Devices MAX3232 manufacturer data sheet. The MAX3232CSE+T is a 16-pin SOIC and includes VCC, ground, charge-pump capacitor connections, driver outputs, receiver inputs, and enable functions according to the exact family variant. Assign PCB tracks by the manufacturer's numbered package view rather than by visual position alone.
What external capacitors does MAX3232CSE+T require?
The MAX3232CSE+T requires four external 0.1µF charge-pump capacitors. The manufacturer data sheet describes this four-capacitor implementation and provides the recommended connection and placement around the device. Keep each capacitor close to its associated charge-pump pin and maintain short, direct current paths because excessive trace length can increase supply disturbance and reduce margin.
Where can I buy MAX3232CSE+T online?
Use the Request a Quote form on this page to request current availability, order quantity, and lead time for MAX3232CSE+T. The exact order code includes the 16-pin SOIC package and tape-and-reel ordering suffix. A purchasing request should confirm the complete MPN, reel quantity, delivery target, and whether any project-specific traceability documentation is required.
How much does MAX3232CSE+T cost?
Use the Request a Quote form on this page for the current MAX3232CSE+T price and volume availability. Pricing can vary with order quantity, reel packaging, market conditions, and supply status. Provide the target quantity and complete MPN so the commercial response reflects the exact 16-pin SOIC, tape-and-reel configuration rather than a related MAX3232 variant.
Is MAX3232CSE+T in stock and what is its lead time?
Current MAX3232CSE+T stock and lead time should be requested through the Request a Quote form on this page. Include the required quantity, target delivery date, and acceptable reel packaging in the request. The manufacturer's production status indicates that the MAX3232 family remains active, but present inventory and scheduling should be confirmed for the exact ordering code.
What are the key specifications of MAX3232CSE+T engineers should know?
The principal MAX3232CSE+T specifications are a 3.0V-to-5.5V supply range, operation up to 1Mbps, two transmit channels, two receive channels, true RS-232 signaling, and a 16-pin SOIC package. The Analog Devices manufacturer data sheet also specifies four external 0.1µF charge-pump capacitors. These details define the core interchangeability checks for any proposed replacement.
What is the difference between MAX3232CSE+T and MAX3232CUE+T?
MAX3232CSE+T and MAX3232CUE+T belong to the MAX3232 family, but the letter code identifies different package or ordering configurations that must be compared before substitution. The MAX3232CSE+T is identified as a 16-pin SOIC part. Confirm the exact package outline, exposed dimensions, pin numbering, temperature grade, and order code for MAX3232CUE+T using the manufacturer's data before treating it as a drop-in device.

के लिए इंजीनियरिंग संदर्भ डेटा MAX3232CSE+T — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MAX3232CSE+T for a compact RS-232 interface that operates from 3.0V to 5.5V and needs two transmitters, two receivers, and data rates up to 1Mbps. Its 16-pin SOIC package is suitable for conventional surface-mount designs and its integrated charge pumps eliminate the need for a negative supply rail. Choose MAX3232ECSE+ when its documented extended-temperature characteristics better match the deployment environment, after confirming that every pin function and capacitor requirement remains compatible. Choose MAX3232ESE+ when its ordering code and electrical configuration satisfy the intended supply, temperature, enable, and interface requirements. Choose MAX3232CUE+ only after checking its exact package code, temperature grade, and enable arrangement. For every replacement, verify the manufacturer pin table, RS-232 levels, external 0.1µF capacitor arrangement, and connector wiring before production release.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX3232ECSE+ MAX3232ESE+ MAX3232CUE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V

मुख्य विशेषताएँ

  • Operates from a 3.0V-to-5.5V supply without an external negative rail (बनामMAX3232ECSE+)
  • Provides a 1Mbps maximum data rate with true RS-232 operation (बनामMAX3232ESE+)
  • Integrates two transmitters and two receivers in one 16-pin SOIC (बनामMAX3232CUE+)

डिज़ाइन नोट्स

Place all four 0.1µF charge-pump capacitors directly beside their associated MAX3232CSE+T pins, with the shortest practical traces and clean return paths. Keep the charge-pump loop compact and route it away from sensitive receiver inputs. The manufacturer's typical application uses 0.1µF capacitors, so changing their value or distance can alter startup behavior, supply disturbance, and transmission performance.

Separate RS-232 driver outputs from receiver inputs and sensitive board areas to reduce capacitive and inductive coupling. A driven cable may carry transitions far above the low-voltage logic levels inside the circuit. Maintain a common signal ground where required by the interface standard, but analyze ground-potential differences in industrial installations and add protection at externally accessible connectors.

Do not substitute the MAX3232CSE+T solely because a candidate also uses a 16-pin SOIC. Confirm the exact enable-pin polarity, receiver enable behavior, operating-temperature range, supply limits, charge-pump capacitor arrangement, and RS-232 levels in the manufacturer data sheet. The +T ordering form should also be checked against the manufacturer's ordering guide for tape orientation and reel quantity.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The MAX3232 family is listed as being in production, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact ordering code.

डेटा सत्यापन तिथि: 2026-11-13 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

max3232cse t datasheet MAX3232CSE+T datasheet PDF MAX3232CSE+T pinout MAX3232CSE+T replacement MAX3232CSE+T equivalent MAX3232CSE+T vs MAX3232ECSE+ MAX3232CSE+T price MAX3232CSE+T stock Analog Devices MAX3232CSE+T MAX3232CSE+T 16-SOIC MAX3232CSE+T 1Mbps RS-232 MAX3232CSE+T application circuit MAX3232CSE+T drop-in replacement MAX3232 16-pin SOIC footprint

संबंधित कंपोनेंट्स और शब्द

Analog Devices Maxim Integrated MAX3232CSE+T MAX3232ECSE+ MAX3232ESE+ MAX3232CUE+ RS-232 true RS-232 transceiver interface IC transceiver IC communication interface semiconductor RS-232 driver RS-232 receiver charge pump dual charge pump 3.0V to 5.5V supply 1Mbps data rate 16-pin SOIC SOIC package family surface mount SMD 0.1µF capacitor industrial control programmable instrument embedded serial console
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें