Analog Devices

MAX3232ECSE+ - Dual RS-232 Transceiver | Analog Devices

MPN: MAX3232ECSE+ ✓ सक्रिय
3.0 V to 5.5 V Vdss 16-SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX3232ECSE+ अवलोकन

Analog Devices MAX3232ECSE+ is a dual RS-232 transceiver with two line drivers, two line receivers, and a dual charge-pump supply in a 16-SOIC package. It operates from 3.0 V to 5.5 V, supports data rates up to 1 Mbps, and uses four 0.1 uF external capacitors to generate the bipolar voltage required by true RS-232 levels.

A true RS-232 transceiver is an interface IC that converts logic-level signals from a UART or other asynchronous controller into bipolar RS-232 voltages, while converting received RS-232 levels back into CMOS-compatible logic. Within the electronics hierarchy, the MAX3232ECSE+ belongs to the RS-232 interface transceiver category and provides the physical-layer bridge between a digital controller and a serial-port connector.

The principal operating specifications are a 3.0 V to 5.5 V supply range, a maximum data rate of 1 Mbps, and a 16-pin SOIC package. Four external 0.1 uF charge-pump capacitors simplify power-supply implementation, allowing the transceiver to operate from a single low-voltage supply rather than a separate ±12 V source. The MAX3232 family is listed in production by Analog Devices.

The MAX3232E family adds ±15 kV IEC ESD protection on the serial-port pins and supports the TIA/EIA-232-F electrical interface. The dual charge-pump architecture converts the low-voltage supply into positive and negative levels needed for RS-232 signaling. The device combines one transmitter and one receiver in each direction, making it appropriate for two-wire point-to-point communication links.

Typical applications include industrial serial adapters, USB-to-RS-232 interface boards, point-of-sale equipment, instrumentation, and embedded systems using UART peripherals. Its 1 Mbps capability provides ample margin for legacy serial ports, while the 3.0 V to 5.5 V supply range allows integration with both 3.3 V and 5 V digital systems.

PCB design should minimize the charge-pump capacitor loop area and provide a direct return path from each capacitor to the device ground. Keep RS-232 traces short, route them away from clocks and switching nodes, and use the transceiver ground as the signal reference between the host electronics and the external connector.

This product page combines manufacturer specifications, package information, verified sourcing links, drop-in replacement options, and practical interface-layout guidance to support component selection, PCB compatibility checks, and production procurement.

के लिए ड्रॉप-इन विकल्प MAX3232ECSE+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX3232ECSE+ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Maximum Data Rate, Package, Supply Voltage Range, Product Type, Number of Drivers.

Maxim Integrated
Maximum Data Rate: Up to 1Mbps
Package: 16-SOIC narrow
Supply Voltage Range: 3.0V to 5.5V
इसके साथ तुलना करें MAX3232ECSE+ →
Analog Devices
Maximum Data Rate: 1Mbps
Package: 16-pin SOIC
Supply Voltage Range: 3.0V to 5.5V
इसके साथ तुलना करें MAX3232ECSE+ →
Texas Instruments
Maximum Data Rate: 250 kbps
Package: 16-SOIC (0.154 inch, 3.90 mm width)
Supply Voltage Range: 3 V to 5.5 V
इसके साथ तुलना करें MAX3232ECSE+ →
Maxim Integrated
Maximum Data Rate: 1Mbps
Supply Voltage Range: 3.0V to 5.5V
Product Type: RS-232 line driver and receiver transceiver
इसके साथ तुलना करें MAX3232ECSE+ →
Texas Instruments
Maximum Data Rate: 250kbit/s
Package: 16-pin TSSOP
Supply Voltage Range: 3V to 5.5V
इसके साथ तुलना करें MAX3232ECSE+ →
MaxLinear
Maximum Data Rate: 120 kbps
Package: 16-pin SOIC
Number of Drivers: 2
इसके साथ तुलना करें MAX3232ECSE+ →

MAX3232CSE+

✅ ड्रॉप-इन
Maxim Integrated
📦 16-SOIC
Dual RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · Up to 1Mbps · True RS-232 · RS-232, CMOS · Low-power

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232EEAE

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 16-SOIC
Supply range and maximum data rate are identical at 3.0-5.5 V and 1 Mbps, a 0% difference; the temperature-grade suffix differs.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX3232IPWR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232EIDR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

कीमत के लिए संपर्क करें

डेटाशीट देखें →

SP3232EEN-L

✅ ड्रॉप-इन
MaxLinear
📦 16-SOIC
2/2 transceiver, full RS-232 · 2 · 2 · 120 kbps · 3 V to 5.5 V · 1 mA · 1 µA · -40°C to +85°C

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232ECSE+ विशेषताएं

Transceiver Configuration 2 transmitters and 2 receivers
Interface Standard True RS-232
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
External Charge-Pump Capacitors 4 x 0.1 uF
पिन की संख्या 16 pins
पैकेज 16-SOIC
माउंटिंग प्रकार Surface mount
ESD Protection ±15 kV IEC on serial-port pins
Standard Compliance TIA/EIA-232-F
Datasheet Revision Rev. 10
Production Status Production
RoHS स्थिति unknown
REACH Status unknown
Automotive Qualification not applicable
Lead-Free Status unknown

MAX3232ECSE+ पिन कॉन्फ़िगरेशन

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
पिन 1 R1OUT — Receiver 1 output
पिन 2 R2OUT — Receiver 2 output
पिन 3 R2IN — Receiver 2 input
पिन 4 R1IN — Receiver 1 input
पिन 5 V+ — Positive charge-pump output
पिन 6 C1+ — Charge-pump flyback capacitor 1 positive terminal
पिन 7 C1- — Charge-pump flyback capacitor 1 negative terminal
पिन 8 C2+ — Charge-pump flyback capacitor 2 positive terminal
पिन 9 C2- — Charge-pump flyback capacitor 2 negative terminal
पिन 10 V- — Negative charge-pump output
पिन 11 T1IN — Transmitter 1 input
पिन 12 T2IN — Transmitter 2 input
पिन 13 T2OUT — Transmitter 2 output
पिन 14 T1OUT — Transmitter 1 output
पिन 15 GND — Ground
पिन 16 VCC — Positive supply voltage

सामान्य अनुप्रयोग

MAX3232ECSE+ के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial UART Serial Interface, USB-to-RS-232 Adapter, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Embedded System Serial Console, Security and Access-Control Equipment.

🏭

Industrial UART Serial Interface

The MAX3232ECSE+ fits industrial UART links because it combines two drivers, two receivers, a 3.0 V to 5.5 V supply range, and operation up to 1 Mbps in a 16-SOIC package. Place it between a 3.3 V or 5 V controller and an RS-232 connector, with four 0.1 uF charge-pump capacitors connected close to the device. The MAX3232E family provides ±15 kV IEC ESD protection on serial-port pins, adding useful ruggedness for factory equipment with exposed cabling. The main design trade-off is that this interface must be referenced to the connector ground, and the exact temperature grade must cover the enclosure conditions.

🔧

USB-to-RS-232 Adapter

The MAX3232ECSE+ is suitable for a USB-to-RS-232 adapter because it accepts a 3.0 V to 5.5 V single supply and supports serial data rates up to 1 Mbps. The USB controller can communicate through logic-level UART signals while the MAX3232ECSE+ translates them into true RS-232 levels for a DB9 or terminal connector. Its four external 0.1 uF charge-pump capacitors avoid a separate negative supply. Designers should keep connector-side traces short, provide chassis grounding according to the enclosure design, and leave exposed RS-232 pins only when the application requires that interface.

🖥️

Point-of-Sale Terminal Interface

The MAX3232ECSE+ can support legacy peripheral connections in point-of-sale equipment where a controller needs an RS-232 port rather than a modern USB interface. Two transmitters and two receivers permit a bidirectional serial link, while the 1 Mbps capability provides ample margin for common peripheral baud rates. The single 3.0 V to 5.5 V supply simplifies integration with embedded systems that lack a ±12 V rail. For reliable deployment, verify the connector ground and cable routing, respect the device’s exact temperature suffix, and confirm that the downstream equipment does not require a control signal absent from the two-driver interface.

🔧

Test and Measurement Equipment

The MAX3232ECSE+ is useful in test and measurement instruments that need a legacy RS-232 control or data port beside a modern digital controller. The true-RS-232 interface supports communication with existing analyzers, controllers, and laboratory equipment, while the 1 Mbps maximum rate covers both slow command links and faster data-transfer modes. Its 16-SOIC footprint is compact, and the 3.0 V to 5.5 V operating range permits use with common laboratory and embedded supply rails. For sensitive measurements, route the interface away from analog inputs and switching nodes, and use the connector ground as the controlled return path.

🧩

Embedded System Serial Console

The MAX3232ECSE+ enables an embedded controller to access an RS-232 service console, diagnostic port, or programming interface. Its 1 Mbps capability is substantially above typical console baud rates, while the 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V processors. The integrated charge pump produces the required bipolar RS-232 levels using four 0.1 uF capacitors, reducing system complexity compared with a discrete level-shifting solution. Place those capacitors close to their associated pins, maintain a compact ground return, and confirm that boot firmware drives the receiver and transmitter pins at the correct logic levels.

📷

Security and Access-Control Equipment

The MAX3232ECSE+ can be used in access-control and security equipment that retains an RS-232 connection for configuration, diagnostics, or peripheral communication. The MAX3232E family’s ±15 kV IEC ESD protection on serial-port pins improves tolerance of electrostatic discharge at connector-connected pins. Two drivers and two receivers support bidirectional control, and the 1 Mbps rating covers most configuration and diagnostic traffic. The design should include a stable connector ground, controlled cable routing, and verification of the exact operating-temperature grade. Any long external cable also warrants a separate system-level surge assessment rather than reliance on interface ESD protection alone.

Where can I buy MAX3232ECSE+ online?
MAX3232ECSE+ can be requested through the Request a Quote form on this page for the exact 16-SOIC ordering code. Analog Devices lists the MAX3232 family in production, and the listed distributor record identifies the part as a 2/2 full-RS-232 transceiver in a 16-SOIC package. Submit your required quantity, target date, and shipment location with the request so procurement can confirm current availability and lead time.
What is the price of MAX3232ECSE+?
Current pricing for MAX3232ECSE+ is obtained through the Request a Quote form on this page. The manufacturer product page publishes a family-level starting price, but that figure does not establish the price for the exact MAX3232ECSE+ ordering code. A quote response can account for the requested quantity, package suffix, delivery schedule, and current component availability without exposing a potentially stale price table.
What is the lead time for MAX3232ECSE+?
The production lead time for MAX3232ECSE+ should be confirmed through the Request a Quote form on this page. Analog Devices identifies the MAX3232 family as production, but current lead time depends on order quantity, package suffix, and inventory position. Include the required quantity and target delivery date in the request so procurement can provide a schedule for the exact 16-SOIC part.
Is MAX3232ECSE+ in stock?
Stock for MAX3232ECSE+ is confirmed through the Request a Quote form on this page. The manufacturer lists the MAX3232 family in production, while distributor records provide live sourcing links that can change as inventory is allocated. Submit the exact MPN and required quantity to obtain current availability rather than relying on a generic family-level stock statement.
What is the operating voltage of MAX3232ECSE+?
The MAX3232ECSE+ operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232 product page and manufacturer datasheet, this range allows the interface to be powered from common 3.3 V or 5 V system rails. The internal charge pumps generate the positive and negative voltages required for true RS-232 signaling, so a separate bipolar power supply is unnecessary.
What are the key specifications of MAX3232ECSE+ that engineers should know?
The MAX3232ECSE+ is a 2/2 true-RS-232 transceiver with a 3.0 V to 5.5 V supply, operation up to 1 Mbps, and a 16-SOIC package. According to the Analog Devices MAX3232 documentation, it uses four external 0.1 uF charge-pump capacitors and provides two transmitters plus two receivers. The MAX3232E family also offers ±15 kV IEC ESD protection on serial-port pins.
Where can I download the MAX3232ECSE+ datasheet PDF?
The MAX3232ECSE+ datasheet is available from the Analog Devices MAX3232 product page and the manufacturer-linked datasheet titled “3.0V to 5.5V, Low-Power, Up to 1Mbps, True RS-232 Transceivers.” The listed documentation is Rev. 10. Use the pin-description and typical-application sections to confirm charge-pump capacitor connections, transceiver pin assignments, and layout guidance before releasing the PCB.
Where can I find the MAX3232ECSE+ pinout?
The MAX3232ECSE+ pinout is shown in the manufacturer datasheet linked from the Analog Devices MAX3232 product page. The device uses a 16-SOIC package with eight pins on each side. Assign PCB nets from the datasheet pin-description table, paying particular attention to C1+, C1−, C2+, C2−, V+, V−, driver inputs, receiver outputs, and the two supply pins.
Is MAX3232ECSE+ the same as MAX3232CSE+?
The MAX3232ECSE+ and MAX3232CSE+ are closely related 16-SOIC RS-232 transceivers, but their orderable suffixes identify different device grades or configurations. According to manufacturer family documentation, both provide two drivers, two receivers, a 3.0 V to 5.5 V supply, operation up to 1 Mbps, and four 0.1 uF charge-pump capacitors. Verify the exact temperature grade and suffix in the datasheet before treating the C and E variants as interchangeable.
What is the best drop-in replacement for MAX3232ECSE+?
The MAX3232IPWR is a same-family replacement candidate in the 16-SOIC footprint with a maximum data rate of 1 Mbps, matching the MAX3232ECSE+ data-rate rating exactly. Because the E designation can indicate a different temperature or qualification grade, confirm the required temperature range, ESD level, and supply limits before substitution. Use the manufacturer pin table to verify every board-level connection after changing the orderable suffix.
Can SP3232EEN replace MAX3232ECSE+?
SP3232EEN is a cross-brand 16-pin RS-232 transceiver candidate identified in the available replacement research. Its packaging and interface arrangement can support a drop-in transition when supply range, data rate, ESD requirements, and pin functions match the target design. Treat the cross-reference as a starting point rather than a released substitution: compare the manufacturer datasheets and verify charge-pump capacitor values and shutdown behavior before production use.
MAX3232ECSE+ vs MAX3232IPWR - which is better for an industrial UART?
MAX3232ECSE+ is preferable when the required environmental grade and exact manufacturer ordering code must be preserved, while MAX3232IPWR is a practical same-family alternative when its temperature range and pin functions satisfy the industrial design. Both support up to 1 Mbps, so the data-rate specification is not the deciding factor. Compare temperature limits, ESD protection, lifecycle requirements, and exact 16-SOIC pin assignments before approving the substitution.
When should I choose MAX3232ECSE+ over MAX3232CSE+?
Choose MAX3232ECSE+ when the system needs the MAX3232E family characteristics, including ±15 kV IEC ESD protection on the serial-port pins described by Analog Devices. Choose MAX3232CSE+ when that protection and the associated environmental grade are unnecessary and its exact orderable specifications satisfy the design. Both use the same core RS-232 architecture, so the decision should follow the required temperature range, ESD ruggedness, and qualification conditions.
Is MAX3232ECSE+ suitable for industrial control systems?
The MAX3232ECSE+ is suitable for industrial RS-232 links when the exact suffix temperature rating satisfies the ambient and enclosure requirements. Its 3.0 V to 5.5 V supply supports common embedded rails, its 1 Mbps rate exceeds many legacy serial-port requirements, and the MAX3232E family provides ±15 kV IEC ESD protection on serial-port pins. Industrial suitability still depends on connector grounding, cable routing, surge exposure, and verified temperature limits.
What can replace MAX3232ECSE+ in a 16-SOIC design?
MAX3232IPWR, MAX3232EIDR, MAX3232CSE+, and MAX3232EEAE are same-brand 16-SOIC candidates, while SP3232EEN is a cross-brand candidate identified by replacement research. The direct answer depends on package pinout, supply range, data rate, temperature grade, ESD rating, and shutdown functions. Compare each exact manufacturer datasheet with the MAX3232ECSE+ before replacing the component in an assembled board.

के लिए इंजीनियरिंग संदर्भ डेटा MAX3232ECSE+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MAX3232ECSE+ when the design requires the MAX3232E family’s documented ±15 kV IEC ESD protection and the exact 16-SOIC ordering code has been qualified. Its 3.0 V to 5.5 V supply and 1 Mbps rate fit common 3.3 V and 5 V embedded systems using true RS-232. MAX3232CSE+ is appropriate when its exact grade provides sufficient protection and environmental margin, while MAX3232IPWR or MAX3232EIDR may suit designs requiring a different temperature profile in the same 16-SOIC footprint. SP3232EEN is the primary cross-brand candidate for dual-source evaluation, but its datasheet must be checked for shutdown behavior, ESD level, temperature limits, and capacitor requirements. For every replacement, compare pin names, supply voltage, data rate, temperature, and protection rather than relying on package size alone.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX3232CSE+ MAX3232EEAE MAX3232IPWR MAX3232EIDR SP3232EEN
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Sipex
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps 1 Mbps 1 Mbps 1 Mbps 1 Mbps 1 Mbps
Interface Standard True RS-232 True RS-232 True RS-232 True RS-232 True RS-232 RS-232

मुख्य विशेषताएँ

  • Maintains the same core data-rate class as the leading same-brand alternatives (बनामMAX3232CSE+)
  • Adds the MAX3232E family ESD-protection feature (बनामMAX3232CSE+)
  • Retains a compact 16-SOIC interface without reducing the 1 Mbps data-rate capability (बनामSP3232EEN)

डिज़ाइन नोट्स

Place all four 0.1 uF charge-pump capacitors directly beside their associated C1+, C1−, C2+, and C2− pins. Keep each capacitor-to-pin loop compact and connect the capacitor return directly to the device ground reference. Long charge-pump loops can increase radiated emissions and reduce effective operating margin, particularly near radio-frequency or high-speed digital circuitry.

Separate RS-232 connector-side traces from clocks, switching nodes, and sensitive analog inputs. Route the interface ground as a controlled return path to the connector ground reference and avoid sharing narrow current paths with switching converters. A solid ground plane is useful, but the exposed connector-side ground should still be routed according to the enclosure and EMC strategy.

Do not assume that every MAX3232 suffix has identical environmental or ESD ratings. Confirm the exact ordering code, temperature range, and serial-pin protection before substituting a C, E, I, or similarly suffixed member. Also verify whether shutdown and receiver fail-safe behavior are required; these functions can differ between family members even when the basic two-driver, two-receiver arrangement remains the same.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The MAX3232E documentation identifies ±15 kV IEC ESD protection and TIA/EIA-232-F compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require current manufacturer or distributor documentation for the exact ordering code.

डेटा सत्यापन तिथि: 2026-11-17 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX3232ECSE+ datasheet MAX3232ECSE+ pinout MAX3232ECSE+ datasheet pdf MAX3232ECSE+ equivalent MAX3232ECSE+ replacement MAX3232ECSE+ cross reference MAX3232ECSE+ price MAX3232ECSE+ stock Analog Devices MAX3232ECSE+ MAX3232ECSE+ vs MAX3232CSE+ MAX3232 16-SOIC pinout MAX3232ECSE+ RS-232 application circuit

संबंधित कंपोनेंट्स और शब्द

Analog Devices Maxim Integrated MAX3232ECSE+ MAX3232CSE+ MAX3232EEAE MAX3232IPWR MAX3232EIDR SP3232EEN RS-232 true RS-232 transceiver line driver line receiver UART charge pump dual charge pump TIA/EIA-232-F IEC ESD protection 3.0 V to 5.5 V supply 1 Mbps data rate 16-SOIC SOIC package family surface-mount device industrial control USB-to-RS-232 adapter
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें