Analog Devices

MAX3232CUE+T - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232CUE+T ✓ सक्रिय
3.0 V to 5.5 V Vdss 16-pin TSSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX3232CUE+T अवलोकन

Analog Devices MAX3232CUE+T is a true RS-232 transceiver with two drivers and two receivers, a maximum data rate of 1 Mbps, and a 3.0 V to 5.5 V supply range. The device is housed in a 16-pin TSSOP package, and the +T suffix identifies the tape-and-reel ordering option. Its dual charge-pump design supports true RS-232 signal levels from a low-voltage supply without requiring a separate 12 V power source.

A true RS-232 transceiver is an interface IC that converts logic-level digital signals into bipolar RS-232 levels and converts incoming RS-232 signals back into logic-level outputs. In the electronic-component hierarchy, the MAX3232 belongs to the RS-232 transceiver class, interface IC family, and broader power-management and connectivity ecosystem. It is commonly placed between a host controller with UART logic and an external RS-232 connector.

The MAX3232 family supports operation from 3.0 V to 5.5 V and data rates up to 1 Mbps. Four external 0.1 µF charge-pump capacitors provide the voltage conversion needed for true RS-232 output levels. The two-driver, two-receiver configuration permits two serial channels, or one bidirectional channel when driver and receiver pairs are connected appropriately. Low-power operation makes the family suitable for compact industrial, communications, instrumentation, and embedded-control equipment.

Internally, the MAX3232 uses charge-pump voltage conversion rather than a transformer or a dedicated negative supply. This architecture simplifies the external power design while preserving the positive and negative voltage swing required by RS-232. The MAX3232 is also identified by Analog Devices as pin, package, and functionally compatible with the industry-standard MAX232, providing a practical migration path for existing RS-232 interfaces.

Typical uses include configuration and programming ports, industrial control links, point-of-sale equipment, test and measurement instruments, and embedded systems that exchange serial commands over RS-232. Designers should use the MAX3232CUE+T when a compact surface-mount implementation, single-supply operation, true RS-232 levels, and a 1 Mbps maximum signaling rate are required. The 16-pin TSSOP footprint also permits assembly with standard small-outline SMD equipment.

The main design consideration is charge-pump capacitor placement. Place the four required 0.1 µF capacitors close to their associated pins and follow the manufacturer datasheet reference layout to minimize switching noise and maintain stable operation. Account for RS-232 connector protection, ground-return requirements, and cable-length limitations even though the transceiver itself supports a high maximum data rate.

This product summary combines manufacturer specifications, ordering information, replacement analysis, pin-and-package constraints, and practical interface-design guidance. It helps engineers compare the MAX3232CUE+T with related low-power RS-232 transceivers while focusing on the same 16-pin TSSOP footprint and the electrical requirements of a working RS-232 link.

के लिए ड्रॉप-इन विकल्प MAX3232CUE+T — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX3232CUE+T (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Product Type, Package, Maximum Data Rate, Supply Voltage Range, ESD Protection.

Analog Devices
Product Type: 2/2 full-duplex RS-232 transceiver
ESD Protection: ±15 kV
इसके साथ तुलना करें MAX3232CUE+T →
Texas Instruments
Product Type: Dual RS-232 line driver and receiver
Package: 16-pin TSSOP (PW)
Maximum Data Rate: 250 kbps
इसके साथ तुलना करें MAX3232CUE+T →
Maxim Integrated
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
इसके साथ तुलना करें MAX3232CUE+T →
Analog Devices
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
इसके साथ तुलना करें MAX3232CUE+T →
Analog Devices
Product Type: 3-driver, 5-receiver RS-232 transceiver
Package: TSSOP-28
Maximum Data Rate: 250 kbps
इसके साथ तुलना करें MAX3232CUE+T →

MAX3232EUE+T

✅ ड्रॉप-इन
Analog Devices
📦 16-pin TSSOP
2/2 RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · 300 µA · 0.1 µF each · 4

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232ECUE+

✅ ड्रॉप-इन
Analog Devices
📦 16-pin TSSOP
2/2 full-duplex RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · Down to 10 nA · ±15 kV · True RS-232

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232EUE+

✅ ड्रॉप-इन
Maxim Integrated
📦 16-pin TSSOP
RS-232 · Dual Transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · True RS-232 · Dual charge pump

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3232CUE+T विशेषताएं

Product Type 2/2 transceiver, full RS-232
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
Number of Drivers 2
Number of Receivers 2
Charge-Pump Capacitors 4 × 0.1 µF
पैकेज 16-pin TSSOP
माउंटिंग प्रकार Surface mount
Ordering Suffix +T tape-and-reel option
लाइफसाइकिल स्थिति Production
Product Family Compatibility Pin, package, and functionally compatible with MAX232

MAX3232CUE+T 16-pin tssop पिन कॉन्फ़िगरेशन गाइड

MAX3232CUE+T (16-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX3232CUE+T के लिए 16-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX3232CUE+T.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX3232CUE+T के लिए उपयुक्त है 6 अनुप्रयोगs: Embedded Controller Serial Port, Industrial Control Communication, Test and Measurement Instrument, Programming and Configuration Port, Point-of-Sale and Peripheral, Instrumentation and Data Acquisition.

🔧

Embedded Controller Serial Port

The MAX3232CUE+T is appropriate for adding a true RS-232 port to an embedded controller whose UART operates at 3.3 V or 5 V. The two-driver, two-receiver arrangement can serve one bidirectional channel or two unidirectional channels, while the 1 Mbps family rating provides ample headroom for typical command and telemetry traffic. Four external 0.1 µF capacitors implement the charge pumps. Place them close to the device and route the RS-232 traces away from clocks, sensors, and precision analog inputs to limit connector and charge-pump coupling.

🏭

Industrial Control Communication

MAX3232CUE+T can connect a controller, sensor hub, or service terminal to legacy industrial equipment using a true RS-232 interface. Its 3.0 V to 5.5 V operating range allows integration with modern control electronics without a separate high-voltage supply, and the 16-pin TSSOP package supports compact board layouts. The interface does not provide galvanic isolation or surge protection, so field-facing designs should use appropriate connector protection and grounding. Verify the exact temperature rating and EMC requirements for the installation environment.

🖥️

Test and Measurement Instrument

The MAX3232CUE+T is useful for bringing a legacy RS-232 instrument port into a digital test system. Its 1 Mbps maximum family data rate supports fast command transfers, while the two transmitters and two receivers offer flexibility for instrument control and status reporting. The low 3.0 V to 5.5 V supply operation simplifies powering from embedded test hardware. Use the manufacturer layout for the four charge-pump capacitors, preserve a continuous signal ground, and consider a protection network at the external connector where cables leave the enclosure.

🔧

Programming and Configuration Port

A MAX3232CUE+T can provide a PC-compatible configuration interface for embedded equipment, fixtures, and service tools. The target logic can operate from 3.3 V or 5 V, while the transceiver generates the bipolar RS-232 levels expected by the host. At 16 pins, the TSSOP implementation preserves board area, and the two-channel arrangement can support separate transmit and receive paths when wiring allows. Keep the cable-side interface away from sensitive analog sections and use the datasheet reference layout so charge-pump currents do not disrupt adjacent circuitry.

💳

Point-of-Sale and Peripheral

The MAX3232CUE+T fits compact peripheral boards that communicate with a host through an RS-232 port, including service terminals and legacy peripheral adapters. Its single 3.0 V to 5.5 V supply simplifies system power, while the 1 Mbps family capability handles short command bursts and status updates. The small TSSOP footprint supports high-density assemblies, but the designer must account for the four external charge-pump capacitors. Add connector-level surge protection for externally accessible cables and avoid long unprotected cable runs.

📟

Instrumentation and Data Acquisition

The MAX3232CUE+T can connect a data-acquisition controller or laboratory instrument to a computer or service terminal using true RS-232 levels. Its 3.3 V and 5 V compatibility supports integration with modern digital controllers, and the 1 Mbps maximum data rate is suitable for commands, configuration data, and streamed measurements. Four 0.1 µF charge-pump capacitors are required, so follow the official placement guidance and provide a low-impedance ground return. For precision measurement nodes, use separate analog and digital grounding strategies to prevent RS-232 return currents from disturbing measurements.

What is the MAX3232CUE+T?
The MAX3232CUE+T is a true RS-232 transceiver containing two drivers and two receivers in a 16-pin TSSOP package. According to the Analog Devices MAX3232 product page, it operates from 3.0 V to 5.5 V, supports data rates up to 1 Mbps, and uses four external 0.1 µF charge-pump capacitors. It is intended for systems that need bidirectional RS-232 communication from a low-voltage digital supply.
What is the operating voltage of MAX3232CUE+T?
The MAX3232CUE+T operates from a 3.0 V to 5.5 V supply. The Analog Devices MAX3232 product page identifies the family as a low-power, true RS-232 transceiver with a maximum signaling rate of 1 Mbps. This supply range allows the interface to operate from common 3.3 V and 5 V system rails while still generating the bipolar voltage levels required by RS-232 through its internal charge pumps.
Where can I download the MAX3232CUE+T datasheet PDF?
The official MAX3232CUE+T technical documentation is available from the Analog Devices MAX3232 product page at https://www.analog.com/en/products/max3232.html. The page identifies the data sheet as Revision 10 and provides the MAX3232 family documentation. Use the manufacturer data sheet for the exact pin description, electrical characteristics, charge-pump capacitor values, recommended layout, and operating limits.
Where can I find the MAX3232CUE+T pinout?
The MAX3232CUE+T pinout is found in the pin-description section of the official Analog Devices MAX3232 data sheet linked from the MAX3232 product page. The package is a 16-pin TSSOP, also identified as 16-TSSOP in distributor listings. Assign PCB tracks using the numbered pin table and recommended package drawing rather than inferring pin functions from a generic RS-232 transceiver diagram.
What are the key specifications of MAX3232CUE+T that engineers should know?
The principal MAX3232CUE+T specifications are a 3.0 V to 5.5 V supply range, a 1 Mbps maximum data rate, two drivers, two receivers, and four external 0.1 µF charge-pump capacitors. The Analog Devices product page also identifies the family as production and compatible with MAX232. These points determine supply compatibility, serial throughput, channel count, and external component requirements.
Where can I buy MAX3232CUE+T online?
The MAX3232CUE+T can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, quantity requirements, and lead time. The product is identified as a production MAX3232 device in a 16-pin TSSOP package, with the +T ordering suffix denoting the tape-and-reel option.
What is the price of MAX3232CUE+T?
Current MAX3232CUE+T commercial terms should be obtained through the Request a Quote form on this page. The form allows the required quantity, packaging, delivery location, and target timing to be entered without relying on a static price that may change with inventory. The exact ordering code is MAX3232CUE+T, covering the 16-pin TSSOP device and its tape-and-reel option.
What is the lead time for MAX3232CUE+T?
The current MAX3232CUE+T lead time should be requested through the Request a Quote form on this page. The Analog Devices product page identifies MAX3232 as a production family, which supports active sourcing, but actual delivery timing depends on order quantity and supply conditions. Include the required date and quantity when submitting the request so production planning can use an appropriate schedule.
Is MAX3232CUE+T in stock?
Stock for MAX3232CUE+T should be confirmed through the Request a Quote form on this page. A distributor page or an in-stock marker is not a guarantee that inventory is immediately allocatable, especially for larger production quantities. The official product listing identifies MAX3232 as production, so buyers can submit the exact MPN and required quantity for current allocation confirmation.
MAX3232CUE+T vs MAX3232EUE+T - which is better for a low-voltage RS-232 port?
The MAX3232CUE+T is the better primary choice when the required device is specifically the MAX3232C grade with the +T ordering option. MAX3232EUE+T belongs to the E-grade MAX3232 family and is identified in comparison listings as another 16-pin TSSOP low-power true RS-232 transceiver. Both can suit 3.0 V to 5.5 V systems, but the C-versus-E functional, qualification, or lifecycle differences must be confirmed from the manufacturer data sheet before substitution.
When should I choose MAX3232CUE+T over MAX3232EUE+T?
Choose MAX3232CUE+T when the design has been qualified specifically around the MAX3232C grade, the MAX232-compatible family behavior, and the +T tape-and-reel format. The MAX3232EUE+T is a closely related 16-pin TSSOP alternative, so package placement is not the deciding constraint. Review the manufacturer comparison of C and E grades for temperature, qualification, and lifecycle requirements before changing the approved device.
Is MAX3232CUE+T suitable for an industrial RS-232 interface?
The MAX3232CUE+T is suitable for many 3.3 V and 5 V RS-232 interfaces because it provides true RS-232 levels, two drivers, two receivers, and operation up to 1 Mbps. For an industrial deployment, verify the exact operating-temperature range, isolation requirements, ESD rating, connector protection, and regulatory needs in the manufacturer data sheet. The transceiver handles signal conversion but does not replace surge protection or galvanic isolation.
What can replace MAX3232CUE+T?
The closest identified replacements are the same-brand MAX3232EUE+T and MAX3232ECUE+ alternatives, both associated with the 16-pin TSSOP MAX3232 family. They can be evaluated as pin-compatible drop-in options, but grade and suffix differences must be reviewed for temperature range, qualification, lifecycle, and ordering requirements. Use the manufacturer pin and parameter tables before approving any substitution.
What is the best Analog Devices equivalent for MAX3232CUE+T?
The best Analog Devices-family equivalent identified for MAX3232CUE+T is MAX3232EUE+T because comparison listings place both in the same MAX3232 true RS-232 transceiver family and use a 16-pin TSSOP package. The MAX3232ECUE+ is another same-brand option for evaluation. Compatibility is not automatic: confirm pin functions, electrical limits, temperature grade, qualification, and lifecycle in the official documentation.
How should MAX3232CUE+T charge-pump capacitors be placed?
Place all four required 0.1 µF charge-pump capacitors close to the associated MAX3232CUE+T pins, and follow the manufacturer recommended layout. The Analog Devices MAX3232 documentation identifies four 0.1 µF external capacitors as part of the true RS-232 implementation. Short connections, a quiet ground return, and a clean supply path help reduce charge-pump coupling into nearby communication or measurement circuitry.

के लिए इंजीनियरिंग संदर्भ डेटा MAX3232CUE+T — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MAX3232CUE+T when the design requires a production MAX3232 true RS-232 transceiver in a 16-pin TSSOP package, operates from 3.3 V or 5 V, and benefits from the family's listed 1 Mbps capability. MAX3232EUE+T is a viable same-package option when its grade-specific 235 kbps listing rating is sufficient and its temperature, qualification, and lifecycle terms are approved. MAX3232ECUE+ should be evaluated when the C/E grade distinction matches the target specification more closely. MAX3232EUE can be considered for prototype or approved non-+T sourcing, but the ordering suffix and reel configuration must be reconciled. In every case, verify pin functions, electrical limits, temperature range, ESD behavior, and capacitor placement against the manufacturer data sheet before converting the schematic into production hardware.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX3232EUE+T MAX3232ECUE+ MAX3232EUE
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Type 2/2 transceiver, full RS-232 Low-power true RS-232 transceiver MAX3232-family RS-232 transceiver Low-power true RS-232 transceiver
Number of Drivers 2 2 2 2
Number of Receivers 2 2 2 2
Family Compatibility Pin, package, and functionally compatible with MAX232 MAX3232 family MAX3232 family MAX3232 family
Ordering Suffix +T +T + No +T suffix

मुख्य विशेषताएँ

  • Full 1 Mbps MAX3232 family performance (बनामMAX3232EUE+T)
  • Explicit MAX232-compatible family foundation (बनामMAX3232ECUE+)
  • Production 3.3 V and 5 V integration (बनामMAX3232EUE)

डिज़ाइन नोट्स

Place the four required 0.1 µF charge-pump capacitors immediately adjacent to their associated MAX3232CUE+T pins, using the shortest practical traces. The Analog Devices data sheet specifies this capacitor count and value. Keep the charge-pump return current within a compact loop and avoid routing RS-232 outputs directly beneath sensitive analog or high-speed digital traces. A reference-layout implementation is preferable to a generic placement because capacitor connection length can affect startup and conducted-noise behavior.

Separate the logic-side UART nets from the cable-side RS-232 nets at the IC boundary. Keep the connector, protection components, and cable interface away from precision analog sections, and provide a direct ground return for the RS-232 link. Although RS-232 uses unbalanced signaling, common-impedance ground currents can still disturb sensitive measurements. A clean ground-plane strategy and controlled connector entry reduce coupling between the transceiver, external cables, and adjacent circuitry.

Do not treat the MAX3232CUE+T as a galvanically isolated interface or as a complete surge-protection solution. Its 3.0 V to 5.5 V operating range and 1 Mbps family maximum do not imply that every attached cable, voltage, or environmental condition is safe. Validate the exact temperature grade, supply tolerance, receiver thresholds, and interface limits in the manufacturer data sheet, and add appropriate protection at externally accessible connectors where required.

The listed 1 Mbps maximum belongs to the MAX3232 family, while some comparison listings identify E-grade parts at 235 kbps. Use the manufacturer data sheet for the exact ordered grade before selecting edge rates or cable assumptions. Keep transition paths short, maintain a continuous reference plane, and avoid long stubs. If the cable is external or crosses noisy equipment, prioritize connector protection and grounding rather than relying on the transceiver's internal charge pumps.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The MAX3232 family is an RS-232 interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, and halogen-free declarations must be confirmed from the current manufacturer product documentation or material declaration.

डेटा सत्यापन तिथि: 2026-11-17 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX3232CUE+T datasheet MAX3232CUE+T datasheet pdf MAX3232CUE+T pinout MAX3232CUE+T equivalent MAX3232CUE+T replacement MAX3232CUE+T cross reference MAX3232CUE+T vs MAX3232EUE+T MAX3232CUE+T footprint MAX3232CUE+T application circuit Analog Devices MAX3232CUE+T MAX3232CUE+T price MAX3232CUE+T stock 16-TSSOP 1Mbps RS-232 transceiver MAX3232CUE+T 3.3V RS-232

संबंधित कंपोनेंट्स और शब्द

Analog Devices Maxim Integrated MAX3232CUE+T MAX3232EUE+T MAX3232ECUE+ MAX3232EUE MAX232 RS-232 transceiver interface IC true RS-232 UART 3.3 V logic 5 V logic 1 Mbps data rate charge-pump voltage converter 0.1 µF capacitor 16-pin TSSOP TSSOP family surface-mount package SMD bipolar RS-232 signal industrial communication data acquisition test and measurement RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें