MAX3232CUE+T - 1Mbps RS-232 Transceiver | Analog Devices
部品番号: MAX3232CUE+T ✓ 生産中MAX3232CUE+T 概要
A true RS-232 transceiver is an interface IC that converts logic-level digital signals into bipolar RS-232 levels and converts incoming RS-232 signals back into logic-level outputs. In the electronic-component hierarchy, the MAX3232 belongs to the RS-232 transceiver class, interface IC family, and broader power-management and connectivity ecosystem. It is commonly placed between a host controller with UART logic and an external RS-232 connector.
The MAX3232 family supports operation from 3.0 V to 5.5 V and data rates up to 1 Mbps. Four external 0.1 µF charge-pump capacitors provide the voltage conversion needed for true RS-232 output levels. The two-driver, two-receiver configuration permits two serial channels, or one bidirectional channel when driver and receiver pairs are connected appropriately. Low-power operation makes the family suitable for compact industrial, communications, instrumentation, and embedded-control equipment.
Internally, the MAX3232 uses charge-pump voltage conversion rather than a transformer or a dedicated negative supply. This architecture simplifies the external power design while preserving the positive and negative voltage swing required by RS-232. The MAX3232 is also identified by Analog Devices as pin, package, and functionally compatible with the industry-standard MAX232, providing a practical migration path for existing RS-232 interfaces.
Typical uses include configuration and programming ports, industrial control links, point-of-sale equipment, test and measurement instruments, and embedded systems that exchange serial commands over RS-232. Designers should use the MAX3232CUE+T when a compact surface-mount implementation, single-supply operation, true RS-232 levels, and a 1 Mbps maximum signaling rate are required. The 16-pin TSSOP footprint also permits assembly with standard small-outline SMD equipment.
The main design consideration is charge-pump capacitor placement. Place the four required 0.1 µF capacitors close to their associated pins and follow the manufacturer datasheet reference layout to minimize switching noise and maintain stable operation. Account for RS-232 connector protection, ground-return requirements, and cable-length limitations even though the transceiver itself supports a high maximum data rate.
This product summary combines manufacturer specifications, ordering information, replacement analysis, pin-and-package constraints, and practical interface-design guidance. It helps engineers compare the MAX3232CUE+T with related low-power RS-232 transceivers while focusing on the same 16-pin TSSOP footprint and the electrical requirements of a working RS-232 link.
ドロップイン代替品: MAX3232CUE+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3232CUE+T (同一形状・フットプリント) — 相違点: Product Type, Package, Maximum Data Rate, Supply Voltage Range, ESD Protection.
MAX3232EUE+T
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3232ECUE+
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3232EUE+
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3232CUE+T 仕様
| Product Type | 2/2 transceiver, full RS-232 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Charge-Pump Capacitors | 4 × 0.1 µF |
| パッケージ | 16-pin TSSOP |
| 実装タイプ | Surface mount |
| Ordering Suffix | +T tape-and-reel option |
| ライフサイクル状態 | Production |
| Product Family Compatibility | Pin, package, and functionally compatible with MAX232 |
MAX3232CUE+T 16-pin tssop ピン配置ガイド
MAX3232CUE+T (16-pin tssop パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX3232CUE+T.
詳細は データシート をご参照ください。
主な用途
MAX3232CUE+T の用途: 6 件s: Embedded Controller Serial Port, Industrial Control Communication, Test and Measurement Instrument, Programming and Configuration Port, Point-of-Sale and Peripheral, Instrumentation and Data Acquisition.
Embedded Controller Serial Port
The MAX3232CUE+T is appropriate for adding a true RS-232 port to an embedded controller whose UART operates at 3.3 V or 5 V. The two-driver, two-receiver arrangement can serve one bidirectional channel or two unidirectional channels, while the 1 Mbps family rating provides ample headroom for typical command and telemetry traffic. Four external 0.1 µF capacitors implement the charge pumps. Place them close to the device and route the RS-232 traces away from clocks, sensors, and precision analog inputs to limit connector and charge-pump coupling.
おすすめ
Industrial Control Communication
MAX3232CUE+T can connect a controller, sensor hub, or service terminal to legacy industrial equipment using a true RS-232 interface. Its 3.0 V to 5.5 V operating range allows integration with modern control electronics without a separate high-voltage supply, and the 16-pin TSSOP package supports compact board layouts. The interface does not provide galvanic isolation or surge protection, so field-facing designs should use appropriate connector protection and grounding. Verify the exact temperature rating and EMC requirements for the installation environment.
おすすめ
Test and Measurement Instrument
The MAX3232CUE+T is useful for bringing a legacy RS-232 instrument port into a digital test system. Its 1 Mbps maximum family data rate supports fast command transfers, while the two transmitters and two receivers offer flexibility for instrument control and status reporting. The low 3.0 V to 5.5 V supply operation simplifies powering from embedded test hardware. Use the manufacturer layout for the four charge-pump capacitors, preserve a continuous signal ground, and consider a protection network at the external connector where cables leave the enclosure.
おすすめ
Programming and Configuration Port
A MAX3232CUE+T can provide a PC-compatible configuration interface for embedded equipment, fixtures, and service tools. The target logic can operate from 3.3 V or 5 V, while the transceiver generates the bipolar RS-232 levels expected by the host. At 16 pins, the TSSOP implementation preserves board area, and the two-channel arrangement can support separate transmit and receive paths when wiring allows. Keep the cable-side interface away from sensitive analog sections and use the datasheet reference layout so charge-pump currents do not disrupt adjacent circuitry.
おすすめ
Point-of-Sale and Peripheral
The MAX3232CUE+T fits compact peripheral boards that communicate with a host through an RS-232 port, including service terminals and legacy peripheral adapters. Its single 3.0 V to 5.5 V supply simplifies system power, while the 1 Mbps family capability handles short command bursts and status updates. The small TSSOP footprint supports high-density assemblies, but the designer must account for the four external charge-pump capacitors. Add connector-level surge protection for externally accessible cables and avoid long unprotected cable runs.
おすすめ
Instrumentation and Data Acquisition
The MAX3232CUE+T can connect a data-acquisition controller or laboratory instrument to a computer or service terminal using true RS-232 levels. Its 3.3 V and 5 V compatibility supports integration with modern digital controllers, and the 1 Mbps maximum data rate is suitable for commands, configuration data, and streamed measurements. Four 0.1 µF charge-pump capacitors are required, so follow the official placement guidance and provide a low-impedance ground return. For precision measurement nodes, use separate analog and digital grounding strategies to prevent RS-232 return currents from disturbing measurements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3232CUE+T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3232EUE+T | MAX3232ECUE+ | MAX3232EUE |
|---|---|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | 2/2 transceiver, full RS-232 | Low-power true RS-232 transceiver | MAX3232-family RS-232 transceiver | Low-power true RS-232 transceiver |
| Number of Drivers | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 |
| Family Compatibility | Pin, package, and functionally compatible with MAX232 | MAX3232 family | MAX3232 family | MAX3232 family |
| Ordering Suffix | +T | +T | + | No +T suffix |
主な差別化要因
- Full 1 Mbps MAX3232 family performance (vs MAX3232EUE+T)
- Explicit MAX232-compatible family foundation (vs MAX3232ECUE+)
- Production 3.3 V and 5 V integration (vs MAX3232EUE)
設計ノート
Place the four required 0.1 µF charge-pump capacitors immediately adjacent to their associated MAX3232CUE+T pins, using the shortest practical traces. The Analog Devices data sheet specifies this capacitor count and value. Keep the charge-pump return current within a compact loop and avoid routing RS-232 outputs directly beneath sensitive analog or high-speed digital traces. A reference-layout implementation is preferable to a generic placement because capacitor connection length can affect startup and conducted-noise behavior.
Separate the logic-side UART nets from the cable-side RS-232 nets at the IC boundary. Keep the connector, protection components, and cable interface away from precision analog sections, and provide a direct ground return for the RS-232 link. Although RS-232 uses unbalanced signaling, common-impedance ground currents can still disturb sensitive measurements. A clean ground-plane strategy and controlled connector entry reduce coupling between the transceiver, external cables, and adjacent circuitry.
Do not treat the MAX3232CUE+T as a galvanically isolated interface or as a complete surge-protection solution. Its 3.0 V to 5.5 V operating range and 1 Mbps family maximum do not imply that every attached cable, voltage, or environmental condition is safe. Validate the exact temperature grade, supply tolerance, receiver thresholds, and interface limits in the manufacturer data sheet, and add appropriate protection at externally accessible connectors where required.
The listed 1 Mbps maximum belongs to the MAX3232 family, while some comparison listings identify E-grade parts at 235 kbps. Use the manufacturer data sheet for the exact ordered grade before selecting edge rates or cable assumptions. Keep transition paths short, maintain a continuous reference plane, and avoid long stubs. If the cable is external or crosses noisy equipment, prioritize connector protection and grounding rather than relying on the transceiver's internal charge pumps.
コンプライアンス情報
The MAX3232 family is an RS-232 interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, and halogen-free declarations must be confirmed from the current manufacturer product documentation or material declaration.