Maxim Integrated

MAX323ESA+ - Dual 16V SPST Analog Switch | Maxim

MPN: MAX323ESA+ ✓ सक्रिय
2.7 V to 16 V Vdss 175 ohms Rds(on) 8-pin NSOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX323ESA+ अवलोकन

The Maxim Integrated MAX323ESA+ is a precision, dual-channel, normally open SPST analog switch designed for single-supply operation from 2.7 V to 16 V. Each independent channel has a typical on-resistance of 175 ohms, and the device is housed in an 8-pin NSOIC package. Its low 5 microwatt power consumption makes it suitable for battery-powered and low-leakage signal-routing systems.

An analog switch is a semiconductor device that routes electrical signals between terminals under digital control. The MAX323ESA+ belongs to the analog-switch hierarchy, where its two normally open SPST channels provide independent, unidirectional or bidirectional signal connections. In system terms, it sits between external analog circuitry and a controller, allowing a compact processor to select among sensors, test points, or signal paths.

The MAX323 family provides two precision SPST switches in a single package. Both channels are normally open, meaning each path is disconnected until its control input commands closure. Operation from 2.7 V to 16 V covers 3.3 V and 5 V control systems as well as higher single-supply rails. The 5 microwatt low-power characteristic is particularly useful when leakage or standby consumption is more important than minimizing on-resistance.

The device's precision switching architecture is intended for moderate-impedance signal paths rather than power switching. A 175-ohm on-resistance can limit voltage drops when carrying source currents, but it is substantially higher than a power MOSFET or relay. Engineers should therefore account for the resistance in the complete signal path and avoid using the switch as a general-purpose high-current load driver. The low-power design also makes the device appropriate for battery-powered measurement and communication equipment.

Typical uses include analog test-point selection, sensor disconnect, sample-and-hold isolation, battery-powered instrumentation, and routing signals between a data-acquisition circuit and an analog front end. The MAX323 family is also identified for DAC and ADC applications, audio and video switching, communication systems, guidance and control systems, and heads-up displays where low standby power is valuable.

The principal design consideration is control compatibility and signal integrity. Keep analog traces short, use a continuous ground reference, and ensure that control transitions do not inject unacceptable disturbance into sensitive measured signals. The normally open architecture also means the switch remains disconnected during power-down, which can be advantageous for isolation but may differ from a normally closed design.

This page combines the manufacturer's family specifications, verified package and pricing references, application guidance, and drop-in comparison information to support component selection, PCB planning, and replacement analysis beyond the basic datasheet feature list.

के लिए ड्रॉप-इन विकल्प MAX323ESA+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

MAX323ESA

✅ ड्रॉप-इन
📦 8-pin NSOIC
Same dual normally open SPST configuration and 8-pin NSOIC footprint; the suffix qualification differs, so grade and orderable suffix must be confirmed

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX323CUA+

✅ ड्रॉप-इन
📦 8-pin NSOIC
Same MAX323-family dual-SPST architecture in the same 8-pin NSOIC footprint; the grade suffix differs by up to 10% in matched family parameters

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX324ESA+

✅ ड्रॉप-इन
📦 8-pin NSOIC
Same 8-pin NSOIC footprint and 2.7 V to 16 V supply class, but both switches are normally closed rather than normally open

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX325ESA+

✅ ड्रॉप-इन
📦 8-pin NSOIC
Same 8-pin NSOIC footprint and dual-SPST channel count, but one channel is normally open and the other is normally closed

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX323ESA+T

✅ ड्रॉप-इन
📦 8-pin NSOIC
Same MAX323ESA electrical configuration and 8-pin NSOIC footprint, with a different ordering suffix associated with packing configuration

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX323ESA+ Maximum Ratings और Electrical Characteristics

Product Type Precision analog switch
Number of Channels 2 channels
Switch Configuration Dual SPST, normally open (NO)
Supply Voltage Range 2.7 V to 16 V
On-Resistance 175 ohms
Power Consumption 5 microwatts
पैकेज 8-pin NSOIC
पिन काउंट 8 pins
माउंटिंग प्रकार Surface mount
Number of Switches 2 switches
Switch Type Single-pole, single-throw (SPST)
Default State Normally open
Supply Type Single supply
Signal Configuration 1:1
Manufacturer Maxim Integrated
लाइफसाइकिल स्थिति Production

MAX323ESA+ 8-pin nsoic पिन कॉन्फ़िगरेशन गाइड

MAX323ESA+ (8-pin nsoic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX323ESA+ के लिए 8-pin nsoic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX323ESA+.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX323ESA+ के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Data Acquisition, Precision Analog Signal Routing, ADC and DAC Signal Isolation, Audio and Video Signal Switching, Industrial Test and Measurement, Communication and Guidance Systems.

🔋

Battery-Powered Data Acquisition

The MAX323ESA+ fits battery-powered data-acquisition systems because its dual SPST channels operate from 2.7 V to 16 V while consuming approximately 5 microwatts. Place the device between the analog input network and the acquisition circuitry to disconnect or reconnect selected sensors without leaving an unintended signal path connected. The normally open state is particularly useful when standby current is critical. Because the switch has a listed on-resistance of 175 ohms, engineers should verify that the resulting voltage drop and input-loading effects remain acceptable for the selected sensor and amplifier.

⚡

Precision Analog Signal Routing

The MAX323ESA+ is suitable for precision analog signal routing where two independent paths must be selected under digital control. Its two normally open SPST channels can connect sensor outputs, test points, or amplifier inputs one at a time. The 2.7 V minimum supply supports 3.3 V systems, while the 16 V maximum provides additional flexibility for higher-voltage single-supply designs. The 175-ohm on-resistance must be included in the source-impedance and error-budget calculation, especially when driving a high-impedance downstream amplifier.

📊

ADC and DAC Signal Isolation

The MAX323ESA+ can isolate ADC or DAC signal paths in mixed-signal equipment by separating a converter input or output until commanded. This can prevent unused channels from loading a sensitive analog node and can support controlled connection sequences during measurement cycles. Its low 5 microwatt consumption is valuable in portable instruments, while the normally open behavior provides a defined disconnected state. Confirm that the 175-ohm resistance and switch leakage satisfy the converter’s input-impedance, settling-time, and acquisition-noise requirements before finalizing the signal chain.

🎧

Audio and Video Signal Switching

The MAX323ESA+ can implement low-power signal routing in audio and video equipment where the switched impedance is acceptable. The two independent channels may select between sources, isolate an amplifier input, or disconnect a muted section of a circuit. Operation from a single 5 V rail is convenient for conventional consumer electronics, and the manufacturer notes TTL compatibility at 5 V. For high-fidelity audio paths, verify noise, off-state leakage, and channel behavior against the signal amplitude and impedance before using the switch in a critical reference path.

🏭

Industrial Test and Measurement

The MAX323ESA+ is appropriate for test-point multiplexing, probe isolation, and controlled connection of external measurement nodes in industrial instrumentation. Two normally open channels can isolate the device under test until a measurement sequence commands connection, reducing loading from unused fixtures. The 2.7 V to 16 V operating range accommodates several single-supply system rails. Designers should account for the 175-ohm insertion resistance, control settling time, and possible charge injection when establishing the accuracy budget for high-impedance or high-speed measurements.

🌐

Communication and Guidance Systems

The MAX323ESA+ can support signal selection or isolation in compact communication and guidance systems where board area and standby power are constrained. Its 8-pin NSOIC package leaves routing space for the two analog channels, while the 2.7 V to 16 V supply range supports common embedded rails. The switch should be used for low-current signal paths rather than power loads. Validate control thresholds, off-state leakage, and transient behavior in the final system, particularly when switching signals near sensitive communication or sensing thresholds.

अनुशंसित उत्पादों का सारांश

MAX323ESA+ Maxim Integrated उपयोग में: Battery-Powered Data Acquisition, ADC and DAC Signal Isolation, Audio and Video Signal Switching, Industrial Test and Measurement, Communication and Guidance Systems MAX323CUA+ Related MAX323-family switch उपयोग में: Battery-Powered Data Acquisition, Precision Analog Signal Routing, Communication and Guidance Systems MAX323ESA Same dual-SPST switch family उपयोग में: Precision Analog Signal Routing, Audio and Video Signal Switching MAX324ESA+ Normally closed family alternative उपयोग में: ADC and DAC Signal Isolation MAX325ESA+ Mixed normally open and normally closed family option उपयोग में: Industrial Test and Measurement
What is the MAX323ESA+?
The MAX323ESA+ is a precision, dual-channel, normally open SPST analog switch from Maxim Integrated. According to the MAX323/MAX324/MAX325 manufacturer datasheet, the device operates from a single 2.7 V to 16 V supply, consumes approximately 5 microwatts, and provides two independent switch channels in an 8-pin NSOIC package.
What are the key specifications of MAX323ESA+ that engineers should know?
The MAX323ESA+ combines two normally open SPST channels, a 2.7 V to 16 V supply range, and approximately 175-ohm on-resistance in an 8-pin NSOIC package. The manufacturer identifies low power consumption of about 5 microwatts. These characteristics suit signal-routing and isolation duties in low-power instrumentation rather than high-current power switching.
Where can I download the MAX323ESA+ datasheet PDF?
The MAX323ESA+ datasheet can be obtained from the Analog Devices MAX323 product page or through the linked MAX323/MAX324/MAX325 manufacturer PDF. The family datasheet contains the electrical characteristics, switch configurations, application information, and package drawings needed to evaluate the MAX323ESA and its related variants.
Where can I find the MAX323ESA+ pinout?
The MAX323ESA+ pin configuration is shown in the pin-description and package-drawing sections of the MAX323/MAX324/MAX325 manufacturer datasheet. The device uses an 8-pin NSOIC package. Use that drawing to assign control, supply, ground, and analog-switch terminals on the PCB instead of relying on a generic SOIC diagram.
Is MAX323ESA+ suitable for 3.3 V and 5 V systems?
The MAX323ESA+ is suitable for 3.3 V and 5 V single-supply systems because its specified operating range extends from 2.7 V to 16 V. The manufacturer notes that TTL compatibility is provided when operating from a single 5 V supply; operation at other supply voltages requires checking the control-input thresholds in the datasheet.
Can MAX323ESA+ replace MAX323ESA?
The MAX323ESA+ can generally serve as the preferred ordering designation for the MAX323ESA when the required electrical performance and package are unchanged, but engineers should verify the exact suffix, temperature grade, and ordering information in the manufacturer documentation. Both devices use the 8-pin NSOIC format, so PCB compatibility must be confirmed from their respective ordering tables.
What is the best drop-in replacement for MAX323ESA+?
The closest documented drop-in choice is the MAX323ESA in the same 8-pin NSOIC package, provided the required temperature grade and suffix requirements are verified. The MAX323CUA+ offers another same-family candidate, while MAX324ESA+ and MAX325ESA+ use different normally closed or mixed switch states. Their footprint compatibility does not make them equivalent in every application.
Can MAX324ESA+ replace MAX323ESA+?
The MAX324ESA+ can use the same 8-pin NSOIC footprint, but it is not always a functional drop-in for the MAX323ESA+. The MAX323ESA+ has two normally open switches, whereas the MAX324ESA+ has two normally closed switches. Use the MAX324ESA+ only when the changed default connection is electrically acceptable for the circuit.
Is MAX323ESA+ the same as MAX323CUA+?
The MAX323ESA+ and MAX323CUA+ are closely related MAX323-family dual-SPST devices in the 8-pin NSOIC format, but their exact temperature-grade and ordering suffixes must be checked before substitution. The MAX323ESA+ is the specified target part; use the manufacturer part-selection table to confirm electrical limits, grade, and package for each ordering code.
When should I choose MAX323ESA+ over MAX324ESA+?
Choose the MAX323ESA+ when the disconnected or normally open state is required during reset, power-down, or normal standby. Choose the MAX324ESA+ only when the circuit intentionally requires both channels to remain connected until the device actively opens them. The two devices share the 8-pin NSOIC footprint, but their default switch behavior differs.
Where to buy MAX323ESA+ online?
Use the Request a Quote form on this page to request current MAX323ESA+ availability, quantity breaks, lead time, and supporting supply information. The form is the appropriate channel for a quote-first electronic-component purchase and avoids relying on a static price that may not reflect the requested quantity or suffix.
What is the price of MAX323ESA+?
Current MAX323ESA+ pricing depends on quantity, package suffix, and supply status, so it should be requested through the Request a Quote form on this page. Submit the required order quantity and target package configuration to obtain an updated quotation and available lead time for the exact MPN.
What is the lead time for MAX323ESA+?
The current lead time depends on the requested quantity, package configuration, and supply conditions. Request a quotation on this page using the Request a Quote form, and specify the required quantity, shipment destination, and whether reel or tube packing is needed so production planning can be based on an accurate commitment.
Is MAX323ESA+ in stock?
Stock availability for MAX323ESA+ can change with order volume and package requirements. Use the Request a Quote form on this page to request current availability and a production lead time for the exact suffix and quantity. This provides an order-specific response instead of potentially misleading generic inventory information.
Why should MAX323ESA+ be used in battery-powered equipment?
The MAX323ESA+ is well suited to battery-powered equipment because the manufacturer specifies approximately 5 microwatt of power consumption and a single-supply range of 2.7 V to 16 V. Its normally open channels also remain disconnected during inactive states, helping avoid unintended current paths in low-leakage measurement and control systems.

के लिए इंजीनियरिंग संदर्भ डेटा MAX323ESA+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MAX323ESA+ when the circuit requires two independent, normally open analog paths and low single-supply power consumption. Its 2.7 V to 16 V operating range covers 3.3 V and 5 V systems, while the 175-ohm on-resistance makes it most appropriate for signal routing rather than power switching. The MAX323ESA is the closest base-family ordering option when the required suffix qualification permits it, and MAX323CUA+ may fit applications with the appropriate temperature-grade requirements. Consider the MAX324ESA+ only when two normally closed paths are desired; consider the MAX325ESA+ when one normally open and one normally closed channel are useful. MAX323ESA+T has the same electrical family configuration but a different ordering suffix. For every candidate, verify the exact pin arrangement, grade, lifecycle status, leakage, control thresholds, and intended default connection before releasing a substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX323ESA MAX323CUA+ MAX324ESA+ MAX325ESA+ MAX323ESA+T
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 8-pin NSOIC 8-pin NSOIC 8-pin NSOIC 8-pin NSOIC 8-pin NSOIC 8-pin NSOIC
Number of Channels 2 2 2 2 2 2
Switch Configuration Dual SPST, normally open Dual SPST, normally open Dual SPST, normally open Dual SPST, normally closed One normally open and one normally closed Dual SPST, normally open

मुख्य विशेषताएँ

  • Provides two independent normally open channels (बनामMAX325ESA+)
  • Supports the same single-supply voltage class as the MAX324 family (बनामMAX324ESA+)
  • Offers low 5 microwatt power consumption for portable routing (बनामMAX323CUA+)

डिज़ाइन नोट्स

Do not treat the MAX323ESA+ as a power switch. Its listed on-resistance of 175 ohms can produce substantial voltage drop when carrying useful current, and the 2.7 V to 16 V rating describes the supply rather than a high-current switching capability. Use a MOSFET, relay, or other power stage for load current, and keep the analog switch in the signal path.

Include the 175-ohm on-resistance when calculating divider ratios, source impedance, gain, and ADC acquisition settling. A high-impedance amplifier or converter input may be affected more by leakage and charge injection than by the nominal on-resistance. Verify the complete settling time and signal error against the measurement bandwidth rather than relying only on the switch’s stated resistance.

Place the MAX323ESA+ close to the controlled analog nodes and return the switched signal over a continuous ground reference. Keep the NSOIC footprint, copper clearance, and pin assignment consistent with the manufacturer package drawing. If the device isolates a sensitive sensor, provide a defined ground around the switched interface and avoid routing high-current return paths beneath analog traces.

The approximately 5 microwatt power consumption is appropriate for low-power signal routing, but total standby demand still includes leakage and any control logic. Check the control-driver state during shutdown so the logic does not hold the analog nodes in an unintended condition. For battery designs, calculate worst-case leakage over temperature rather than relying only on the nominal low-power figure.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer family documentation identifies the MAX323 as a production device, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for the exact MAX323ESA+ ordering code. AEC-Q100 is therefore treated as not applicable rather than qualified.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX323ESA+ datasheet MAX323ESA+ pinout MAX323ESA+ datasheet pdf MAX323ESA+ specifications MAX323ESA+ equivalent MAX323ESA+ replacement MAX323ESA+ drop-in replacement MAX323ESA+ 8-SOIC MAX323ESA+ price MAX323ESA+ stock Maxim Integrated MAX323ESA+ MAX323ESA+ application circuit

संबंधित कंपोनेंट्स और शब्द

Maxim Integrated MAX323ESA+ MAX323ESA MAX323CUA+ MAX324ESA+ MAX325ESA+ MAX323ESA+T analog switch precision analog switch SPST switch normally open switch single-supply device signal isolation on-resistance 175 ohm on-resistance 2.7 V minimum supply 16 V maximum supply 5 microwatt power consumption 8-pin NSOIC SOIC family surface-mount package battery-powered equipment data acquisition ADC and DAC switching
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें