Analog Devices

MAX3380ECUP+ - 2Tx/2Rx RS-232 Transceiver | Analog Devices

MPN: MAX3380ECUP+ ✓ सक्रिय
+2.35V to +5.5V Vdss 1 A Id 20-pin TSSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX3380ECUP+ अवलोकन

Analog Devices MAX3380ECUP+ is a 2-transmitter, 2-receiver RS-232 transceiver operating from +2.35V to +5.5V, with 15kV ESD protection on both logic and RS-232 I/O pins. The device is housed in a 20-pin TSSOP package and supports low-power RS-232 communication systems requiring one interface per port.

An RS-232 transceiver is an interface IC that converts between single-ended TTL/CMOS logic levels and differential bipolar RS-232 signal levels. The MAX3380ECUP+ integrates two transmit channels and two receive channels, allowing a compact design to connect a UART, embedded controller, or industrial communications equipment to an RS-232 port. Its dual charge-pump design allows the RS-232 output levels to operate from a supply as low as +2.35V while remaining compatible with +5.5V systems.

Key features include a +2.35V to +5.5V operating range, two transmit and two receive channels, enhanced ESD protection rated at 15kV on both sides of the interface, and support for EIA/TIA-232 and V.28/V.24 communication requirements. The low-power architecture is suitable for battery-powered equipment and portable serial interfaces where supply current and board area are important design constraints.

The MAX3380ECUP+ uses integrated charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 transmitters. Its low-dropout transmitter output stage is designed to preserve compliant RS-232 output levels over the full supply range, including when the supply is close to the minimum operating voltage. The device also provides enhanced ESD protection at the logic and RS-232 pins, helping protect the connected UART or transceiver from electrostatic discharge events.

Typical applications include industrial serial controllers, point-of-sale terminals, test equipment, instrumentation, embedded control systems, and battery-powered communications products. The two-transmitter, two-receiver arrangement is useful when a product needs to monitor one serial connection while transmitting on another without using two separate transceiver packages. The TSSOP-20 footprint also supports compact PCB layouts in equipment with limited connector space.

When laying out the MAX3380ECUP+, place the charge-pump capacitors and interface bypass capacitors close to their associated pins. Keep RS-232 traces short and route them away from sensitive logic and clock signals. Confirm the external capacitor values, supply voltage, and UART logic levels against the manufacturer datasheet before releasing a PCB layout.

This product data combines the manufacturer interface overview with structured application guidance, drop-in replacement information, comparison parameters, and practical layout notes. It is intended to help engineers evaluate the MAX3380ECUP+ for compact, low-voltage RS-232 interfaces while keeping the implementation focused on verified electrical and package characteristics.

के लिए ड्रॉप-इन विकल्प MAX3380ECUP+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX3380ECUP+ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न ESD Protection, Receiver Count, Transmitter Count.

Analog Devices
ESD Protection: ±15 kV on I/O and logic pins
Receiver Count: 2 receivers
Transmitter Count: 2 transmitters
इसके साथ तुलना करें MAX3380ECUP+ →

MAX3380EEUP+T

✅ ड्रॉप-इन
Analog Devices
📦 TSSOP-20
RS-232 transceiver · 2 transmitters · 2 receivers · +2.35V to +5.5V · 460 kbps · Down to +1.65V · ±15 kV on I/O and logic pins · EIA/TIA-232 and V.28/V.24

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3381E

✅ ड्रॉप-इन
📦 TSSOP-20
Related MAX3381E RS-232 interface family with the same +2.35V to +5.5V and 15kV ESD feature set; confirm exact pin configuration and channel behavior

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX3380ECUP+ विशेषताएं

Transceiver Configuration 2 transmitters and 2 receivers
Supply Voltage Range +2.35V to +5.5V
Interface Standard EIA/TIA-232 and V.28/V.24
Output Current 1 A
ESD Protection 15kV on logic and RS-232 I/O pins
पैकेज 20-pin TSSOP
Transmitter Count 2 channels
Receiver Count 2 channels
Charge Pump Dual charge-pump design
माउंटिंग प्रकार Surface mount

MAX3380ECUP+ 20-pin tssop पिन कॉन्फ़िगरेशन गाइड

MAX3380ECUP+ (20-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX3380ECUP+ के लिए 20-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX3380ECUP+.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX3380ECUP+ के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Serial Controllers, Point-of-Sale Terminals, Test and Measurement Instruments, Embedded Communications Equipment, Battery-Powered Portable Products, Service and Configuration Interfaces.

🏭

Industrial Serial Controllers

The MAX3380ECUP+ suits industrial controllers that need more than one RS-232 channel without adding separate transceiver packages. Two transmit channels and two receive channels provide flexible support for configuration ports, local consoles, service interfaces, and external equipment. Its +2.35V to +5.5V operating range can simplify interface design around low-voltage system rails, while 15kV ESD protection on both logic and RS-232 pins strengthens robustness at exposed connector boundaries. The 20-pin TSSOP package also keeps the interface compact on a densely populated controller board.

🖥️

Point-of-Sale Terminals

Point-of-sale terminals often require multiple serial links for a printer, display, scanner, or service connector. The MAX3380ECUP+ provides two RS-232 transmitters and two receivers in one 20-pin TSSOP package, reducing the number of separate interface devices and conserving board area. Its integrated dual charge-pump architecture avoids a discrete RS-232 voltage generator, while the +2.35V minimum supply supports compact low-voltage systems. The 15kV ESD protection on both sides of the interface is useful where cables may be connected by operators during installation or servicing.

🔧

Test and Measurement Instruments

The MAX3380ECUP+ is appropriate for test and measurement instruments that exchange commands and results through RS-232 links. Two transmit and two receive channels can support separate control, measurement, or diagnostic ports while keeping the circuit compact. The +2.35V to +5.5V range allows operation from portable instruments powered by lithium-ion batteries, and the low-dropout transmitter stage is intended to maintain RS-232-compatible output levels across that supply range. Enhanced 15kV ESD protection helps manage static discharge at instrument connector entry points.

🌐

Embedded Communications Equipment

Embedded communications equipment can use the MAX3380ECUP+ to bridge a low-voltage UART or embedded controller to legacy RS-232 equipment. The two transmit and two receive channels allow bidirectional links to more than one peripheral, while the TSSOP-20 footprint supports compact embedded boards. Because the device operates from +2.35V to +5.5V, it can be placed near a +3.3V or +5V system rail without an external RS-232 level-shifting supply. Its dual charge pump and 15kV ESD-protected I/O provide integrated signal conditioning for cable-connected equipment.

📱

Battery-Powered Portable Products

The MAX3380ECUP+ fits portable products that must communicate through RS-232 while operating from a constrained supply. Its +2.35V minimum operating voltage supports direct use with compatible lithium-ion battery systems, and the integrated dual charge pump eliminates the need for a separate inverter circuit for RS-232 levels. Two transmit and two receive channels can support diagnostic and command interfaces in one package. The TSSOP-20 format limits board area, while enhanced ESD protection on both the logic and cable-facing pins helps protect a compact portable design.

🔧

Service and Configuration Interfaces

MAX3380ECUP+ can be used in products that expose a service or configuration connector while also maintaining a separate RS-232 communication channel. The two receiver channels can monitor two incoming serial sources, and the two transmitter channels can support independent outbound links. The 20-pin TSSOP package keeps the interface physically compact, and its +2.35V to +5.5V range offers flexibility across battery, industrial, and conventional +5V architectures. Confirm connector isolation, grounding, and cable-length requirements during system design.

अनुशंसित उत्पादों का सारांश

MAX3380EEUP+T Analog Devices उपयोग में: Industrial Serial Controllers, Point-of-Sale Terminals, Embedded Communications Equipment, Battery-Powered Portable Products MAX3381E Related Analog Devices RS-232 interface family उपयोग में: Test and Measurement Instruments, Embedded Communications Equipment, Service and Configuration Interfaces
What is the MAX3380ECUP+ used for?
The MAX3380ECUP+ is a 2Tx/2Rx RS-232 transceiver used to connect TTL/CMOS logic from a UART or embedded controller to an RS-232 port. It operates from +2.35V to +5.5V and integrates two transmit channels, two receive channels, and a dual charge pump in a 20-pin TSSOP package. According to the Analog Devices MAX3380E product page, the device supports EIA/TIA-232 and V.28/V.24 communication interfaces.
What are the key specifications of MAX3380ECUP+ that engineers should know?
The MAX3380ECUP+ combines a +2.35V to +5.5V supply range with two RS-232 transmitters and two receivers. It provides 15kV ESD protection on both TTL logic and RS-232 I/O pins, uses a dual charge-pump design, and is packaged in 20-pin TSSOP. The Analog Devices MAX3380E product page identifies the device as an EIA/TIA-232 and V.28/V.24 interface with low power requirements.
Can MAX3380ECUP+ operate from a lithium-ion battery supply?
Yes, the MAX3380ECUP+ is designed for a +2.35V to +5.5V supply range, which is compatible with lithium-ion battery systems operating within that voltage window. The manufacturer description specifically notes compatibility with lithium-ion supplies because the low-dropout transmitter output stage maintains RS-232-compatible levels as the supply approaches +2.35V. External decoupling and the datasheet capacitor recommendations should still be followed.
Where can I download the MAX3380ECUP+ datasheet PDF?
The official MAX3380E product and datasheet information is available from Analog Devices at the manufacturer product page: https://www.analog.com/en/products/max3380e.html. Use the MAX3380E datasheet for the MAX3380ECUP+ electrical characteristics, pin descriptions, recommended charge-pump capacitors, bypass capacitors, and RS-232 output-level requirements. The manufacturer page is the preferred source for revision-controlled documentation.
Where can I find the MAX3380ECUP+ pinout?
The MAX3380ECUP+ pinout is shown in the MAX3380E manufacturer datasheet, which covers the 20-pin TSSOP configuration associated with this device. The MAX3380ECUP+ is identified by distributor listings as a 20-TSSOP 2Tx/2Rx RS-232 transceiver. Use the pin-description table and package drawing in the datasheet when assigning PCB nets and checking no-connect or charge-pump capacitor connections.
Is MAX3380ECUP+ suitable for industrial RS-232 equipment?
The MAX3380ECUP+ is suitable for industrial RS-232 interfaces when its electrical and temperature limits fit the installation environment. It offers 15kV ESD protection on both logic and RS-232 I/O pins and operates across a low +2.35V to +5.5V supply range. The manufacturer page identifies EIA/TIA-232 and V.28/V.24 support; verify the operating-temperature limits and system isolation requirements before finalizing an industrial design.
Does MAX3380ECUP+ have ESD protection?
Yes. The MAX3380ECUP+ provides enhanced electrostatic-discharge protection rated at 15kV on both the logic and RS-232 sides of the interface. This protection is useful in systems where the external serial connector can be exposed to user contact, cable transients, or poor grounding. ESD protection does not replace correct board layout, connector placement, grounding, or the application requirements for surge and ESD testing.
What is the difference between MAX3380ECUP+ and MAX3380EEUP+T?
MAX3380EEUP+T is identified as a complete, pin-compatible replacement for MAX3380ECUP+, with consistent terminals, package, and functional characteristics. It is listed in the same TSSOP-20 package family. The cross-reference information describes the main performance parameters as consistent, but engineers should still verify supply voltage, timing, ESD, and operating-temperature requirements against the specific datasheet before substitution.
Can MAX3380EEUP+T replace MAX3380ECUP+ without a PCB change?
Yes, MAX3380EEUP+T is identified as a complete replacement with consistent terminals and a TSSOP-20 package, so it can support a drop-in board transition when the electrical requirements remain acceptable. The manufacturer family is intended for +2.35V to +5.5V RS-232 interfaces with ESD-protected I/O. Confirm the exact ordering suffix, temperature range, and production documentation before approving the substitution.
What is the best drop-in replacement for MAX3380ECUP+?
MAX3380EEUP+T is the best documented drop-in replacement for MAX3380ECUP+ because the cross-reference information states that it is a complete replacement with consistent terminals, package, and functional characteristics. Both are associated with the TSSOP-20 MAX3380E family. Confirm the exact pin mapping and electrical ratings in the datasheet, especially if the replacement changes temperature grade, lifecycle status, or qualification requirements.
When should I choose MAX3380ECUP+ over a single-channel RS-232 transceiver?
Choose MAX3380ECUP+ when the design needs two RS-232 transmit channels and two receive channels in one 20-pin TSSOP device. Its integrated dual charge pump, +2.35V to +5.5V operating range, and 15kV ESD protection on logic and RS-232 pins simplify a dual-port interface. A single-channel device may be preferable when only one transmit and one receive path are required and board area is not a constraint.
Is MAX3380ECUP+ suitable for battery-powered serial devices?
The MAX3380ECUP+ can suit battery-powered serial devices because its +2.35V minimum supply voltage supports lithium-ion battery operation, while the low-power interface architecture is designed for low-power communications equipment. Its dual charge-pump and integrated charge-pump capacitors reduce the need for a separate RS-232 voltage-generation circuit. Validate battery droop, shutdown behavior, and the UART supply levels for the complete product.
What are the applications of MAX3380ECUP+?
Typical MAX3380ECUP+ applications include industrial serial controllers, point-of-sale terminals, test and measurement instruments, embedded communications equipment, and portable battery-powered products. The 2Tx/2Rx configuration allows one product to transmit and monitor on two RS-232 channels while retaining a compact 20-pin TSSOP footprint. The +2.35V to +5.5V range is particularly useful when the interface must operate directly from a low-voltage system rail.
Where to buy MAX3380ECUP+ online?
Use the Request a Quote form on this XAIPART page to request current MAX3380ECUP+ availability, lot quantity, and delivery information. The part is listed as a 2/2 full RS-232 transceiver in a 20-pin TSSOP package, and its manufacturer documentation is available through Analog Devices. A quotation request provides the appropriate route for current sourcing without relying on a static price or stock figure.
What is the price of MAX3380ECUP+?
Current MAX3380ECUP+ commercial terms are handled through the Request a Quote form on this page. The available product records identify the device as an Analog Devices MAX3380ECUP+ 2Tx/2Rx RS-232 transceiver in a 20-TSSOP package. Use the quote form to request quantity pricing, stock, and lead time for the exact suffix and packaging configuration.
What is the lead time for MAX3380ECUP+?
Request the current MAX3380ECUP+ lead time through the Request a Quote form on this page. Lead time can depend on order quantity, manufacturing status, and the exact ordering suffix. The part is offered as MAX3380ECUP+, and distributors list the family as a 20-TSSOP 2Tx/2Rx RS-232 interface with +2.35V to +5.5V operation.
Is MAX3380ECUP+ in stock?
Use the Request a Quote form on this page to check current MAX3380ECUP+ stock for your required quantity and packaging. Stock status changes over time and may differ between the exact ordering suffix and related MAX3380E variants. The product is listed by distributors as a 2/2 full RS-232 transceiver in a 20-pin TSSOP package.
What is the best Analog Devices equivalent for MAX3380ECUP+?
The best documented Analog Devices equivalent is MAX3380EEUP+T, which the cross-reference information describes as a complete replacement with consistent terminals, package, and functional characteristics. It uses the same TSSOP-20 package family and is appropriate for +2.35V to +5.5V RS-232 interface designs. Verify the detailed timing, temperature, ESD, and qualification specifications before production substitution.

के लिए इंजीनियरिंग संदर्भ डेटा MAX3380ECUP+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MAX3380ECUP+ when the design needs a compact, low-voltage RS-232 interface with two transmit channels, two receive channels, and enhanced ESD protection on both sides of the interface. Its +2.35V to +5.5V supply range is especially useful for portable and embedded systems powered near +3.3V or directly from a suitable lithium-ion battery. MAX3380EEUP+T is appropriate when the cross-reference data supports a complete, pin-compatible transition and the replacement's temperature and qualification details meet the system requirements. Consider MAX3381E when reviewing the related Analog Devices family, but confirm its exact channel and pin configuration before using it as a substitute. This product is not appropriate when a single-channel transceiver is sufficient, when the system exceeds its specified supply range, or when a different interface standard such as RS-422 or RS-485 is required.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX3380EEUP+T MAX3381E
Package TSSOP-20 TSSOP-20 TSSOP-20
Brand Analog Devices Analog Devices Analog Devices
Supply Voltage Range +2.35V to +5.5V +2.35V to +5.5V +2.35V to +5.5V
Interface Standard EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24
ESD Protection 15kV on logic and RS-232 I/O pins 15kV on logic and RS-232 I/O pins 15kV on logic and RS-232 I/O pins
Charge Pump Dual charge-pump design Dual charge-pump design Dual charge-pump design

मुख्य विशेषताएँ

  • Integrates four RS-232 channels in one compact package (बनामMAX3380EEUP+T)
  • Supports low-voltage system rails (बनामMAX3381E)
  • Provides protected cable-side and logic-side I/O (बनामMAX3380EEUP+T)

डिज़ाइन नोट्स

Place the MAX3380ECUP+ charge-pump capacitors and supply bypass capacitors directly beside the pins specified in the manufacturer datasheet. Keep the high-current charge-pump loops compact and avoid routing those loops through the logic or RS-232 signal paths. Confirm capacitor voltage ratings and tolerances against the exact MAX3380E datasheet before PCB release.

Route RS-232 traces as a controlled interface rather than as ordinary low-speed logic. Keep the connector-side traces short, provide a continuous return path, and separate them from clocks, ADC inputs, and sensitive analog signals. Use a suitable ground-reference strategy at the connector and follow the system ESD and surge requirements.

Do not treat the logic-side pins as protected RS-232 inputs or the RS-232 pins as TTL-compatible. Verify the UART supply level, the MAX3380ECUP+ supply range, and the external connector mapping. Also confirm that the selected MAX3380E variant provides the required transmitter and receiver channel count before finalizing the PCB footprint.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The device is a general-purpose RS-232 interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the product-page information.

डेटा सत्यापन तिथि: 2026-11-09 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX3380ECUP+ datasheet MAX3380ECUP+ pinout MAX3380ECUP+ datasheet pdf MAX3380ECUP+ replacement MAX3380ECUP+ equivalent MAX3380ECUP+ vs MAX3380EEUP+T MAX3380ECUP+ TSSOP-20 footprint MAX3380ECUP+ price MAX3380ECUP+ stock Analog Devices MAX3380ECUP+ MAX3380ECUP+ RS-232 interface MAX3380ECUP+ 2Tx 2Rx

संबंधित कंपोनेंट्स और शब्द

Analog Devices MAX3380ECUP+ MAX3380EEUP+T MAX3381E RS-232 transceiver RS-232 interface IC EIA/TIA-232 V.28/V.24 2Tx/2Rx transceiver dual charge pump TTL logic CMOS logic UART electrostatic discharge protection 15kV ESD protection +2.35V to +5.5V supply lithium-ion battery supply TSSOP-20 TSSOP package family surface-mount package industrial serial control test and measurement equipment point-of-sale terminal embedded communications
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें