MAX3380ECUP+ - 2Tx/2Rx RS-232 Transceiver | Analog Devices
MPN: MAX3380ECUP+ ✓ نشطMAX3380ECUP+ نظرة عامة
An RS-232 transceiver is an interface IC that converts between single-ended TTL/CMOS logic levels and differential bipolar RS-232 signal levels. The MAX3380ECUP+ integrates two transmit channels and two receive channels, allowing a compact design to connect a UART, embedded controller, or industrial communications equipment to an RS-232 port. Its dual charge-pump design allows the RS-232 output levels to operate from a supply as low as +2.35V while remaining compatible with +5.5V systems.
Key features include a +2.35V to +5.5V operating range, two transmit and two receive channels, enhanced ESD protection rated at 15kV on both sides of the interface, and support for EIA/TIA-232 and V.28/V.24 communication requirements. The low-power architecture is suitable for battery-powered equipment and portable serial interfaces where supply current and board area are important design constraints.
The MAX3380ECUP+ uses integrated charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 transmitters. Its low-dropout transmitter output stage is designed to preserve compliant RS-232 output levels over the full supply range, including when the supply is close to the minimum operating voltage. The device also provides enhanced ESD protection at the logic and RS-232 pins, helping protect the connected UART or transceiver from electrostatic discharge events.
Typical applications include industrial serial controllers, point-of-sale terminals, test equipment, instrumentation, embedded control systems, and battery-powered communications products. The two-transmitter, two-receiver arrangement is useful when a product needs to monitor one serial connection while transmitting on another without using two separate transceiver packages. The TSSOP-20 footprint also supports compact PCB layouts in equipment with limited connector space.
When laying out the MAX3380ECUP+, place the charge-pump capacitors and interface bypass capacitors close to their associated pins. Keep RS-232 traces short and route them away from sensitive logic and clock signals. Confirm the external capacitor values, supply voltage, and UART logic levels against the manufacturer datasheet before releasing a PCB layout.
This product data combines the manufacturer interface overview with structured application guidance, drop-in replacement information, comparison parameters, and practical layout notes. It is intended to help engineers evaluate the MAX3380ECUP+ for compact, low-voltage RS-232 interfaces while keeping the implementation focused on verified electrical and package characteristics.
بدائل مباشرة لـ MAX3380ECUP+ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MAX3380ECUP+ (نفس عامل الشكل والبصمة) — يختلف في ESD Protection, Receiver Count, Transmitter Count.
MAX3380EEUP+T
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX3381E
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MAX3380ECUP+ المواصفات
| Transceiver Configuration | 2 transmitters and 2 receivers |
| Supply Voltage Range | +2.35V to +5.5V |
| Interface Standard | EIA/TIA-232 and V.28/V.24 |
| Output Current | 1 A |
| ESD Protection | 15kV on logic and RS-232 I/O pins |
| العلبة | 20-pin TSSOP |
| Transmitter Count | 2 channels |
| Receiver Count | 2 channels |
| Charge Pump | Dual charge-pump design |
| نوع التركيب | Surface mount |
دليل تكوين أطراف MAX3380ECUP+ 20-pin tssop
تكوين الأطراف لـ MAX3380ECUP+ (حزمة 20-pin tssop). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX3380ECUP+.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MAX3380ECUP+ مناسب لـ 6 التطبيقs: Industrial Serial Controllers, Point-of-Sale Terminals, Test and Measurement Instruments, Embedded Communications Equipment, Battery-Powered Portable Products, Service and Configuration Interfaces.
Industrial Serial Controllers
The MAX3380ECUP+ suits industrial controllers that need more than one RS-232 channel without adding separate transceiver packages. Two transmit channels and two receive channels provide flexible support for configuration ports, local consoles, service interfaces, and external equipment. Its +2.35V to +5.5V operating range can simplify interface design around low-voltage system rails, while 15kV ESD protection on both logic and RS-232 pins strengthens robustness at exposed connector boundaries. The 20-pin TSSOP package also keeps the interface compact on a densely populated controller board.
موصى به
Point-of-Sale Terminals
Point-of-sale terminals often require multiple serial links for a printer, display, scanner, or service connector. The MAX3380ECUP+ provides two RS-232 transmitters and two receivers in one 20-pin TSSOP package, reducing the number of separate interface devices and conserving board area. Its integrated dual charge-pump architecture avoids a discrete RS-232 voltage generator, while the +2.35V minimum supply supports compact low-voltage systems. The 15kV ESD protection on both sides of the interface is useful where cables may be connected by operators during installation or servicing.
موصى به
Test and Measurement Instruments
The MAX3380ECUP+ is appropriate for test and measurement instruments that exchange commands and results through RS-232 links. Two transmit and two receive channels can support separate control, measurement, or diagnostic ports while keeping the circuit compact. The +2.35V to +5.5V range allows operation from portable instruments powered by lithium-ion batteries, and the low-dropout transmitter stage is intended to maintain RS-232-compatible output levels across that supply range. Enhanced 15kV ESD protection helps manage static discharge at instrument connector entry points.
موصى به
Embedded Communications Equipment
Embedded communications equipment can use the MAX3380ECUP+ to bridge a low-voltage UART or embedded controller to legacy RS-232 equipment. The two transmit and two receive channels allow bidirectional links to more than one peripheral, while the TSSOP-20 footprint supports compact embedded boards. Because the device operates from +2.35V to +5.5V, it can be placed near a +3.3V or +5V system rail without an external RS-232 level-shifting supply. Its dual charge pump and 15kV ESD-protected I/O provide integrated signal conditioning for cable-connected equipment.
موصى به
Battery-Powered Portable Products
The MAX3380ECUP+ fits portable products that must communicate through RS-232 while operating from a constrained supply. Its +2.35V minimum operating voltage supports direct use with compatible lithium-ion battery systems, and the integrated dual charge pump eliminates the need for a separate inverter circuit for RS-232 levels. Two transmit and two receive channels can support diagnostic and command interfaces in one package. The TSSOP-20 format limits board area, while enhanced ESD protection on both the logic and cable-facing pins helps protect a compact portable design.
موصى به
Service and Configuration Interfaces
MAX3380ECUP+ can be used in products that expose a service or configuration connector while also maintaining a separate RS-232 communication channel. The two receiver channels can monitor two incoming serial sources, and the two transmitter channels can support independent outbound links. The 20-pin TSSOP package keeps the interface physically compact, and its +2.35V to +5.5V range offers flexibility across battery, industrial, and conventional +5V architectures. Confirm connector isolation, grounding, and cable-length requirements during system design.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MAX3380ECUP+ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MAX3380EEUP+T | MAX3381E |
|---|---|---|---|
| Package | TSSOP-20 | TSSOP-20 | TSSOP-20 |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Supply Voltage Range | +2.35V to +5.5V | +2.35V to +5.5V | +2.35V to +5.5V |
| Interface Standard | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 |
| ESD Protection | 15kV on logic and RS-232 I/O pins | 15kV on logic and RS-232 I/O pins | 15kV on logic and RS-232 I/O pins |
| Charge Pump | Dual charge-pump design | Dual charge-pump design | Dual charge-pump design |
أبرز الفروقات
- Integrates four RS-232 channels in one compact package (مقابلMAX3380EEUP+T)
- Supports low-voltage system rails (مقابلMAX3381E)
- Provides protected cable-side and logic-side I/O (مقابلMAX3380EEUP+T)
ملاحظات التصميم
Place the MAX3380ECUP+ charge-pump capacitors and supply bypass capacitors directly beside the pins specified in the manufacturer datasheet. Keep the high-current charge-pump loops compact and avoid routing those loops through the logic or RS-232 signal paths. Confirm capacitor voltage ratings and tolerances against the exact MAX3380E datasheet before PCB release.
Route RS-232 traces as a controlled interface rather than as ordinary low-speed logic. Keep the connector-side traces short, provide a continuous return path, and separate them from clocks, ADC inputs, and sensitive analog signals. Use a suitable ground-reference strategy at the connector and follow the system ESD and surge requirements.
Do not treat the logic-side pins as protected RS-232 inputs or the RS-232 pins as TTL-compatible. Verify the UART supply level, the MAX3380ECUP+ supply range, and the external connector mapping. Also confirm that the selected MAX3380E variant provides the required transmitter and receiver channel count before finalizing the PCB footprint.
معلومات الامتثال
The device is a general-purpose RS-232 interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the product-page information.