MAX354CPE+ - 8:1 Fault-Protected Analog Multiplexer | Analog Devices
MPN: MAX354CPE+ ✓ सक्रियMAX354CPE+ अवलोकन
An analog multiplexer is a switching IC that connects multiple signal sources to one shared signal path. The MAX354 belongs to the broader analog switch and multiplexer hierarchy, where fault-protected muxes are used to isolate external inputs from sensitive measurement, control, and communication circuits. Its 8:1 configuration makes it appropriate when a system must select among eight sensors, instrument channels, voltage sources, or other low-frequency analog signals.
The key operating attributes are its 8:1 single-channel architecture, 350 ohm on-resistance, 16-pin PDIP package, and fault protection to 40 V beyond the supply rails. These characteristics make the device especially useful in industrial and instrumentation systems where input signals can exceed the normal operating voltage during startup or abnormal system conditions. The MAX354 family is identified as production by Analog Devices, supporting continued design use for new equipment.
Internally, the MAX354 uses a series N-channel, P-channel, N-channel structure. The protected switching path limits fault exposure while retaining the basic function of an analog multiplexer. Because this is a passive analog switching function rather than a powered conversion stage, designers should focus on signal range, on-resistance, leakage, switching behavior, supply requirements, and input protection when evaluating system performance.
Typical applications include industrial sensor acquisition, automated test equipment, data acquisition, process-control interfaces, battery and power-system monitoring, and communication equipment. In these systems, the common output can feed an amplifier, converter, or controller while the multiplexer protects that downstream component from excessive input voltage.
PCB design should preserve the pin assignments and signal-path geometry defined by the manufacturer datasheet. Keep the selected channel traces short, maintain a common ground reference between the multiplexer and analog front end, and account for the 350 ohm on-resistance when calculating source impedance, signal attenuation, and input-referred noise. Confirm all operating voltages and fault conditions before using the protected inputs near the stated 40 V beyond-rail limit.
के लिए ड्रॉप-इन विकल्प MAX354CPE+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
MAX354EPE+
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX354CPE+ विशेषताएं
| Multiplexer Configuration | Single 8:1 analog multiplexer |
| Number of Channels | 8 input channels |
| On Resistance | 350 ohm |
| Number of Circuits | 1 circuit |
| पैकेज | 16-pin PDIP |
| माउंटिंग प्रकार | Through-hole |
| Fault Protection | Up to 40 V beyond the supply rails |
| Protected Switching Structure | Series N-channel, P-channel, N-channel structure |
| Protection Conditions | Power-up, power-down, and fault conditions |
| Product Status | Production |
MAX354CPE+ 16-pin pdip पिन कॉन्फ़िगरेशन गाइड
MAX354CPE+ (16-pin pdip पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX354CPE+.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MAX354CPE+ के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Acquisition, Automated Test Equipment, Data Acquisition Systems, Process-Control Interfaces, Battery and Power-System Monitoring, Communication and Signal Conditioning.
Industrial Sensor Acquisition
The MAX354CPE+ can select one of eight sensor inputs and route it to a shared amplifier or converter input. Its 8:1 architecture reduces the number of analog input channels required by a controller, while the protected series N-channel, P-channel, N-channel structure helps isolate downstream circuitry from overvoltage up to 40 V beyond the supply rails during power-up, power-down, and fault conditions. The specified 350 ohm on-resistance must be included in the source-impedance calculation for the selected sensor. Engineers should also verify signal bandwidth, leakage, settling behavior, and the complete operating limits in the MAX354 data sheet before assigning sensor inputs.
अनुशंसित
Automated Test Equipment
In automated test systems, the MAX354CPE+ provides a practical way to bring one of eight test points onto a common measurement path. This can simplify the analog front end when multiple input sources share an instrument amplifier, ADC, or comparator. Fault protection up to 40 V beyond the supply rails is especially relevant when external test fixtures can present unexpected voltages during connection or disconnection. The 350 ohm on-resistance should be included in fixture and source-resistance calculations, while the selected channel must remain within the device's voltage, current, bandwidth, and operating limits.
अनुशंसित
Data Acquisition Systems
The MAX354CPE+ fits data-acquisition designs that need to consolidate eight low-frequency analog inputs before conversion. Routing the selected channel to one analog-to-digital converter can reduce converter count and simplify synchronization, although channel switching can introduce settling and charge-transfer effects that must be included in the acquisition timing. The 350 ohm on-resistance also forms part of the effective source impedance presented to the converter input. Use the manufacturer's electrical characteristics to establish whether the sensor drive impedance, acquisition bandwidth, and sampling sequence are compatible with the selected architecture.
अनुशंसित
Process-Control Interfaces
The MAX354CPE+ can consolidate eight process or control signals into one shared analog channel when a controller has limited analog inputs. The fault-protected structure helps prevent excessive external voltages from reaching sensitive downstream components during startup, shutdown, and abnormal conditions. In a process-control design, the 350 ohm switch resistance can affect sensor loading and signal accuracy, so the complete source impedance and downstream amplifier gain should be evaluated together. Grounding, shielding, channel settling, and address-transition timing are also important for maintaining predictable control-loop behavior.
अनुशंसित
Battery and Power-System Monitoring
The MAX354CPE+ can route multiple battery or power-system voltages to one monitoring channel when compact analog routing and fault isolation are priorities. Its protected input architecture tolerates overvoltage up to 40 V beyond the supply rails under the manufacturer-defined fault conditions, which is useful when connected to external power nets. The specified 350 ohm on-resistance must be checked against the impedance of the sensing network and the accuracy of the downstream converter. Engineers should also confirm the supply range, input current limits, leakage, and operating-temperature limits before applying the device to a protection-critical system.
अनुशंसित
Communication and Signal Conditioning
The MAX354CPE+ can select one of eight external communication or conditioning channels before they reach a shared amplifier or receiver input. Its fault-protected topology helps limit the exposure of sensitive downstream circuitry when a connected line experiences abnormal voltage. For low-frequency instrumentation or control signals, the principal design trade-off is the 350 ohm on-resistance, which contributes insertion loss and changes the effective impedance seen by the next stage. PCB layout should minimize trace length, provide a low-impedance ground reference, and preserve the manufacturer's recommended pin and decoupling arrangement.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MAX354CPE+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MAX354EPE+ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 16-pin PDIP | 16-pin PDIP |
| Multiplexer Configuration | Single 8:1 | Single 8-channel |
| Overvoltage Protection | Up to 40 V beyond supply rails | Up to 40 V beyond supply rails |
| Switching Structure | Series N-channel, P-channel, N-channel | Series N-channel, P-channel, N-channel |
| Number of Circuits | 1 circuit | 1 circuit |
| Product Status | Production | Production |
मुख्य विशेषताएँ
- Provides high overvoltage tolerance on the protected analog input path (बनामMAX354EPE+)
- Combines eight-channel routing with fault protection in one 16-pin PDIP (बनामMAX355CPE+)
- Uses a protected series N-channel, P-channel, N-channel switch structure (बनामConventional unprotected analog multiplexer)
डिज़ाइन नोट्स
अनुपालन जानकारी
The MAX354CPE+ ordering code includes a plus sign, but the manufacturer page and distributor results do not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated and is not applicable to this analog interface device.