Analog Devices

MAX354CPE+ - 8:1 Fault-Protected Analog Multiplexer | Analog Devices

N.º da peça: MAX354CPE+ ✓ Ativo
350 ohm Rds(on) 16-pin PDIP Package
MOQ: 1 |

MAX354CPE+ Visão geral

The Analog Devices MAX354CPE+ is a single 8:1 fault-protected analog multiplexer with 350 ohm on-resistance, packaged in a 16-pin PDIP. It routes one of eight analog inputs to a common output and provides protection against overvoltage up to 40 V beyond the supply rails during power-up, power-down, and fault conditions. The series N-channel, P-channel, N-channel switch architecture is designed to protect sensitive downstream circuitry when an input temporarily exceeds the normal supply range.

An analog multiplexer is a switching IC that connects multiple signal sources to one shared signal path. The MAX354 belongs to the broader analog switch and multiplexer hierarchy, where fault-protected muxes are used to isolate external inputs from sensitive measurement, control, and communication circuits. Its 8:1 configuration makes it appropriate when a system must select among eight sensors, instrument channels, voltage sources, or other low-frequency analog signals.

The key operating attributes are its 8:1 single-channel architecture, 350 ohm on-resistance, 16-pin PDIP package, and fault protection to 40 V beyond the supply rails. These characteristics make the device especially useful in industrial and instrumentation systems where input signals can exceed the normal operating voltage during startup or abnormal system conditions. The MAX354 family is identified as production by Analog Devices, supporting continued design use for new equipment.

Internally, the MAX354 uses a series N-channel, P-channel, N-channel structure. The protected switching path limits fault exposure while retaining the basic function of an analog multiplexer. Because this is a passive analog switching function rather than a powered conversion stage, designers should focus on signal range, on-resistance, leakage, switching behavior, supply requirements, and input protection when evaluating system performance.

Typical applications include industrial sensor acquisition, automated test equipment, data acquisition, process-control interfaces, battery and power-system monitoring, and communication equipment. In these systems, the common output can feed an amplifier, converter, or controller while the multiplexer protects that downstream component from excessive input voltage.

PCB design should preserve the pin assignments and signal-path geometry defined by the manufacturer datasheet. Keep the selected channel traces short, maintain a common ground reference between the multiplexer and analog front end, and account for the 350 ohm on-resistance when calculating source impedance, signal attenuation, and input-referred noise. Confirm all operating voltages and fault conditions before using the protected inputs near the stated 40 V beyond-rail limit.

Alternativas drop-in para MAX354CPE+ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

MAX354EPE+

✅ Drop-In
📦 16-pin PDIP
Same 16-pin PDIP footprint and protected 8:1 function; ordering-temperature code differs, with the exact grading difference requiring manufacturer-table confirmation.

📋 Alternativa de referência (fora do catálogo)

MAX354CPE+ Especificações

Multiplexer Configuration Single 8:1 analog multiplexer
Number of Channels 8 input channels
On Resistance 350 ohm
Number of Circuits 1 circuit
Encapsulamento 16-pin PDIP
Tipo de montagem Through-hole
Fault Protection Up to 40 V beyond the supply rails
Protected Switching Structure Series N-channel, P-channel, N-channel structure
Protection Conditions Power-up, power-down, and fault conditions
Product Status Production

Guia de Configuração de Pinos do MAX354CPE+ 16-pin pdip

Configuração de pinos para MAX354CPE+ (pacote 16-pin pdip). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-pin pdip para MAX354CPE+

Nenhum dado detalhado de pinagem disponível para MAX354CPE+.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX354CPE+ é adequado para 6 aplicaçãos: Industrial Sensor Acquisition, Automated Test Equipment, Data Acquisition Systems, Process-Control Interfaces, Battery and Power-System Monitoring, Communication and Signal Conditioning.

🏭

Industrial Sensor Acquisition

The MAX354CPE+ can select one of eight sensor inputs and route it to a shared amplifier or converter input. Its 8:1 architecture reduces the number of analog input channels required by a controller, while the protected series N-channel, P-channel, N-channel structure helps isolate downstream circuitry from overvoltage up to 40 V beyond the supply rails during power-up, power-down, and fault conditions. The specified 350 ohm on-resistance must be included in the source-impedance calculation for the selected sensor. Engineers should also verify signal bandwidth, leakage, settling behavior, and the complete operating limits in the MAX354 data sheet before assigning sensor inputs.

🔧

Automated Test Equipment

In automated test systems, the MAX354CPE+ provides a practical way to bring one of eight test points onto a common measurement path. This can simplify the analog front end when multiple input sources share an instrument amplifier, ADC, or comparator. Fault protection up to 40 V beyond the supply rails is especially relevant when external test fixtures can present unexpected voltages during connection or disconnection. The 350 ohm on-resistance should be included in fixture and source-resistance calculations, while the selected channel must remain within the device's voltage, current, bandwidth, and operating limits.

📊

Data Acquisition Systems

The MAX354CPE+ fits data-acquisition designs that need to consolidate eight low-frequency analog inputs before conversion. Routing the selected channel to one analog-to-digital converter can reduce converter count and simplify synchronization, although channel switching can introduce settling and charge-transfer effects that must be included in the acquisition timing. The 350 ohm on-resistance also forms part of the effective source impedance presented to the converter input. Use the manufacturer's electrical characteristics to establish whether the sensor drive impedance, acquisition bandwidth, and sampling sequence are compatible with the selected architecture.

🏭

Process-Control Interfaces

The MAX354CPE+ can consolidate eight process or control signals into one shared analog channel when a controller has limited analog inputs. The fault-protected structure helps prevent excessive external voltages from reaching sensitive downstream components during startup, shutdown, and abnormal conditions. In a process-control design, the 350 ohm switch resistance can affect sensor loading and signal accuracy, so the complete source impedance and downstream amplifier gain should be evaluated together. Grounding, shielding, channel settling, and address-transition timing are also important for maintaining predictable control-loop behavior.

⚡

Battery and Power-System Monitoring

The MAX354CPE+ can route multiple battery or power-system voltages to one monitoring channel when compact analog routing and fault isolation are priorities. Its protected input architecture tolerates overvoltage up to 40 V beyond the supply rails under the manufacturer-defined fault conditions, which is useful when connected to external power nets. The specified 350 ohm on-resistance must be checked against the impedance of the sensing network and the accuracy of the downstream converter. Engineers should also confirm the supply range, input current limits, leakage, and operating-temperature limits before applying the device to a protection-critical system.

🌐

Communication and Signal Conditioning

The MAX354CPE+ can select one of eight external communication or conditioning channels before they reach a shared amplifier or receiver input. Its fault-protected topology helps limit the exposure of sensitive downstream circuitry when a connected line experiences abnormal voltage. For low-frequency instrumentation or control signals, the principal design trade-off is the 350 ohm on-resistance, which contributes insertion loss and changes the effective impedance seen by the next stage. PCB layout should minimize trace length, provide a low-impedance ground reference, and preserve the manufacturer's recommended pin and decoupling arrangement.

Resumo dos produtos recomendados

MAX354CPE+ Analog Devices Usado em: Industrial Sensor Acquisition, Automated Test Equipment, Data Acquisition Systems, Process-Control Interfaces, Battery and Power-System Monitoring, Communication and Signal Conditioning MAX355CPE+ Related protected multiplexer family member Usado em: Industrial Sensor Acquisition, Data Acquisition Systems, Battery and Power-System Monitoring, Communication and Signal Conditioning MAX354EPE+ Same-family 16-pin PDIP protected multiplexer Usado em: Automated Test Equipment, Process-Control Interfaces
What is the MAX354CPE+ and what does it do?
The MAX354CPE+ is a single 8:1 fault-protected analog multiplexer that connects one of eight inputs to a common output. According to the Analog Devices MAX354 product page and data sheet, it uses a series N-channel, P-channel, N-channel structure and protects sensitive circuitry from overvoltage up to 40 V beyond the supply rails. Its specified on-resistance is 350 ohm, and it is packaged in a 16-pin PDIP.
What are the key specifications of MAX354CPE+ that engineers should know?
The MAX354CPE+ combines an 8:1 analog multiplexer, 350 ohm on-resistance, 16-pin PDIP package, and fault protection to 40 V beyond the supply rails. The Analog Devices MAX354 documentation identifies it as a production part designed to protect external inputs during power-up, power-down, and fault conditions. Its series N-channel, P-channel, N-channel switch structure provides the core analog-routing function while adding overvoltage protection.
How much overvoltage can the MAX354CPE+ withstand?
The MAX354CPE+ provides protection against overvoltage up to 40 V beyond the supply rails under the conditions identified by Analog Devices. The manufacturer states that the protection applies during power-up, power-down, and fault conditions. This rating describes the protected analog input path and should be applied within the complete Absolute Maximum Ratings and operating constraints in the MAX354 data sheet.
What is the on-resistance of MAX354CPE+?
The specified on-resistance of the MAX354CPE+ is 350 ohm. Analog Devices lists this value for the MAX354 single 8-channel fault-protected multiplexer, while the distributor product listing for the exact MAX354CPE+ also identifies 350 ohm. Design the source and downstream input impedances around this resistance because it contributes directly to channel insertion loss and can affect noise gain.
Where can I download the MAX354CPE+ datasheet PDF?
The official MAX354CPE+ datasheet can be obtained through the Analog Devices MAX354 product page at https://www.analog.com/en/products/MAX354.html. The page identifies the product as production and links to the MAX354/MAX355 fault-protected multiplexer data sheet. Use the pin-description and Absolute Maximum Ratings tables from that document when assigning PCB signals and defining the operating envelope.
Where can I find the MAX354CPE+ pinout?
The MAX354CPE+ pinout is defined in the pin-description table of the Analog Devices MAX354/MAX355 data sheet. It is a 16-pin PDIP device, and the package drawing identifies the pin numbering used for the common output, select inputs, enables, supplies, and control lines. Use the manufacturer pin table when making PCB assignments because signal names and package orientation must match exactly.
Is MAX354CPE+ suitable for industrial sensor acquisition?
The MAX354CPE+ is suitable for industrial sensor acquisition when the selected sensor signals are within the electrical limits of the MAX354 family. Its 8:1 arrangement consolidates eight inputs onto one analog path, while fault protection to 40 V beyond the supply rails adds useful isolation during abnormal input conditions. Account for the 350 ohm on-resistance, leakage, bandwidth, and supply limits when establishing sensor accuracy and settling time.
What is the difference between MAX354CPE+ and MAX354EPE+?
Both MAX354CPE+ and MAX354EPE+ are identified as 16-pin PDIP versions of the single 8-channel fault-protected MAX354 multiplexer. The manufacturer comparison information describes MAX354EPE+ as using the same protected multiplexer architecture and product family. Check the ordering table in the manufacturer data sheet for the exact temperature-grade and ordering differences before approving a substitution.
What is the best drop-in replacement for MAX354CPE+?
MAX354EPE+ is the closest documented same-package alternative because it is presented as a 16-pin PDIP MAX354 fault-protected multiplexer with the same 8:1 protected function. The exact electrical ordering details and temperature grade must still be checked against the MAX354 data sheet before substitution. A valid drop-in replacement must preserve both the 16-pin footprint and the required voltage, resistance, and protection ratings.
Can MAX354EPE+ replace MAX354CPE+ without PCB changes?
MAX354EPE+ can share the MAX354CPE+ 16-pin PDIP footprint, but it should be treated as a qualified same-family alternative rather than an unconditional substitute. The documented product information identifies both parts as 16-pin PDIP MAX354 fault-protected multiplexers. Confirm the ordering table, temperature grade, supply limits, electrical characteristics, and lifecycle status in the manufacturer documentation before releasing a replacement.
When should I choose MAX354CPE+ over a dual 4:1 multiplexer?
Choose MAX354CPE+ when the design specifically requires one 8:1 analog multiplexer and can use its protected single-ended routing structure. A dual 4:1 device may be preferable when two independent four-channel selections are needed simultaneously, but it is not automatically a pin-compatible replacement. The MAX354CPE+ offers eight inputs, a 350 ohm on-resistance, and fault protection to 40 V beyond the supply rails.
Is MAX354CPE+ the same as MAX355?
No. The MAX354 is a single 8-channel fault-protected analog multiplexer, while the MAX355 belongs to the same protected multiplexing family with a different channel arrangement. The MAX355 is useful for evaluating different multiplex architectures, but sharing the MAX354/MAX355 family does not establish pin-to-pin compatibility. Use the package drawings and pin tables before considering any change.
Where can I buy MAX354CPE+ and what is its current lead time?
Use the Request a Quote form on this page to request current MAX354CPE+ availability, unit pricing, minimum order quantity, and lead time. Analog Devices identifies the MAX354 family as production, while exact inventory and delivery schedules can vary by quantity and procurement conditions. Submit the required package quantity and target date with the request to obtain a current quotation.
How is MAX354CPE+ priced and is it in stock?
Current price and stock status for MAX354CPE+ should be obtained through the Request a Quote form on this page. The Analog Devices product page lists a starting list price for MAX354 models, but quote-oriented procurement and changing availability make that reference insufficient for a firm order. The form is the appropriate route for current pricing, available quantity, and delivery confirmation.
What design considerations matter when routing signals through MAX354CPE+?
The primary design consideration is that the MAX354CPE+ has a specified 350 ohm on-resistance, which forms part of the source impedance seen by the next analog stage. Keep traces short, maintain a solid common ground, and place the selected channel close to the receiving amplifier or converter. Also verify the supply, enable, address, and fault conditions against the MAX354 data sheet before finalizing the layout.

Dados de referência de engenharia para MAX354CPE+ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX354CPE+ when the design requires a single 8:1 analog multiplexer in a 16-pin PDIP and fault protection is important for external or imperfectly controlled signals. Its protected switching architecture can isolate sensitive circuitry from overvoltage up to 40 V beyond the supply rails, but the 350 ohm on-resistance must be included in source-impedance and accuracy calculations. MAX354EPE+ is the documented same-package family alternative when its ordering and temperature-grade details match the intended design. MAX355CPE+ may be useful for a different protected multiplexing architecture, but it is not an automatic drop-in replacement because the family relationship alone does not establish identical pin assignments. For high-speed or low-impedance instrumentation, verify bandwidth, leakage, and settling characteristics in the manufacturer data sheet before committing to this architecture.

Comparação com alternativas

Parâmetro Este produto MAX354EPE+
Brand Analog Devices Analog Devices
Package 16-pin PDIP 16-pin PDIP
Multiplexer Configuration Single 8:1 Single 8-channel
Overvoltage Protection Up to 40 V beyond supply rails Up to 40 V beyond supply rails
Switching Structure Series N-channel, P-channel, N-channel Series N-channel, P-channel, N-channel
Number of Circuits 1 circuit 1 circuit
Product Status Production Production

Principais diferenciais

  • Provides high overvoltage tolerance on the protected analog input path (vs MAX354EPE+)
  • Combines eight-channel routing with fault protection in one 16-pin PDIP (vs MAX355CPE+)
  • Uses a protected series N-channel, P-channel, N-channel switch structure (vs Conventional unprotected analog multiplexer)

Notas de projeto

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The MAX354CPE+ ordering code includes a plus sign, but the manufacturer page and distributor results do not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated and is not applicable to this analog interface device.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX354CPE+ datasheet MAX354CPE+ pinout MAX354CPE+ datasheet pdf MAX354CPE+ equivalent MAX354CPE+ replacement MAX354CPE+ price MAX354CPE+ stock MAX354CPE+ 16-PDIP MAX354CPE+ 350 ohm MAX354CPE+ overvoltage protection MAX354CPE+ vs MAX354EPE+ MAX354CPE+ analog multiplexer application

Componentes & termos relacionados

Analog Devices MAX354CPE+ MAX354EPE+ MAX355CPE+ MAX354 MAX355 analog multiplexer analog switch fault-protected multiplexer 8:1 multiplexer 16-pin PDIP through-hole package on-resistance 350 ohm overvoltage protection 40 V beyond supply rails series N-channel series P-channel power-up protection power-down protection industrial sensor acquisition data acquisition automated test equipment process control signal conditioning
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ