onsemi

MC14017BD - 3-18V CMOS Decade Counter | onsemi

MPN: MC14017BD ✗ जीवन की समाप्ति
3 V to 18 V Vdss 16-SOIC, 3.90 mm width Package DC clock input Speed
न्यूनतम ऑर्डर मात्रा: 1 |

MC14017BD अवलोकन

The onsemi MC14017BD is a 5-stage Johnson decade counter with a built-in code converter, a 3 V to 18 V operating supply range, and ten decoded outputs in a 16-SOIC package. It converts clock pulses into one-of-ten sequential outputs for digital sequencing, timing, and control applications. The counter also provides a carry output for extending the counting sequence beyond ten states.

A decade counter, also called a divide-by-10 counter, belongs to the broader counter and divider hierarchy within CMOS logic and digital timing ICs. Unlike a binary counter, a decade counter produces ten mutually exclusive output states. The Johnson-counter architecture used in the MC14017B is designed to provide high-speed operation and spike-free decoded outputs while retaining fully static operation.

Key features include a five-stage Johnson counter, an integrated decimal code converter, ten decoded outputs, positive-going-edge clock updates, and a carry output for cascaded counting. Its 3 V to 18 V supply operation supports both 5 V and 12 V logic systems. The device is offered in a 16-SOIC surface-mount package, while the MC14017BD temperature-grade designation identifies a military-oriented version of the MC14017B family.

The MC14017B operates from a single positive supply referenced to ground. Its DC clock-input circuit accommodates slow clock rise times, while the decoded outputs change on the positive-going edge of the clock. A clock-inhibit input provides a second control path for pausing the count, and the asynchronous clear input resets the counter so that output Q0 becomes active for the next clock cycle.

Typical applications include decade sequencing, industrial timer and counter modules, stepper-motor position sequencing, programmable logic-controller counters, relay-bank activation sequences, test-equipment timing, and digital clock or display multiplexing. The carry output can also trigger a cascaded decade stage, allowing counters larger than ten states to be constructed with additional devices.

For robust implementations, treat the clock, inhibit, and asynchronous clear signals as logic inputs with defined levels during reset. Keep the clock path short to reduce susceptibility to ringing and multiple transitions near the active clock edge. Verify output timing and supply-current behavior across the full intended temperature range before releasing the design.

This page combines the manufacturer’s counter architecture, package and lifecycle information with drop-in family references, parameter comparisons, application guidance, and practical design notes for engineers evaluating the MC14017BD.

के लिए ड्रॉप-इन विकल्प MC14017BD — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC14017BD (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Mounting Type, Operation Mode, Package.

Harris Corporation
Mounting Type: Through-hole
onsemi
Operation Mode: Synchronous and static operation
Package: SOIC-16-208 mil
इसके साथ तुलना करें MC14017BD →

MC14017BD

✅ ड्रॉप-इन
onsemi
📦 16-SOIC
5-stage Johnson decade counter with built-in code converter · 3 V to 18 V · 10 outputs · 5-stage Johnson counter · Positive-going clock edge · DC clock input · Fully static · Spike-free decoded outputs

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC14017BDG

✅ ड्रॉप-इन
📦 16-SOIC
Same 5-stage Johnson decade-counter architecture and 10 decoded outputs; the published listing identifies a 0% architectural difference, while suffix-specific grade details require verification.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MC14017BF

✅ ड्रॉप-इन
onsemi
📦 16-SOIC
Five-stage Johnson decade counter with built-in code converter · 3 V to 18 V · 16 MHz · 175 ns at 15 V, 50 pF · -55 °C to +125 °C · 500 mW · 10 outputs · 5 stages

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC14017BD Maximum Ratings और Electrical Characteristics

फ़ंक्शन 5-stage Johnson decade counter with built-in code converter
ऑपरेटिंग सप्लाई वोल्टेज 3 V to 18 V
Counter Decoded Output Count 10 outputs
Counter Architecture 5-stage Johnson counter
Counting Edge Positive-going clock edge
Clock Input Type DC clock input
Operation Mode Fully static
Output Behavior Spike-free decoded outputs
Counter Element Count 1 element
Counter Bit Count 10 bits
Logic Polarity Positive and negative
पैकेज 16-SOIC, 3.90 mm width
माउंटिंग प्रकार Surface mount
RoHS स्थिति RoHS compliant

MC14017BD पिन कॉन्फ़िगरेशन

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
पिन 1 CLK — Clock input
पिन 2 CLK INH — Clock inhibit input
पिन 3 CLR — Asynchronous clear input
पिन 4 Q0 — Decoded output 0
पिन 5 Q1 — Decoded output 1
पिन 6 Q2 — Decoded output 2
पिन 7 Q3 — Decoded output 3
पिन 8 VSS — Ground reference
पिन 9 Q4 — Decoded output 4
पिन 10 Q5 — Decoded output 5
पिन 11 Q6 — Decoded output 6
पिन 12 Q7 — Decoded output 7
पिन 13 Q8 — Decoded output 8
पिन 14 Q9 — Decoded output 9
पिन 15 VDD — Positive supply input
पिन 16 CARRY — Carry output

सामान्य अनुप्रयोग

MC14017BD के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Timer and Sequencer, Stepper-Motor Position Sequencing, Programmable Logic Controller Counting, Relay and Contact Sequence Control, Test and Measurement Timing, Digital Clock and Display Sequencing.

🏭

Industrial Timer and Sequencer

The MC14017BD fits industrial timer and sequencer designs that require ten discrete output states. Its five-stage Johnson architecture and built-in code converter drive one decoded output for each count, allowing relays, indicators, or control stages to be activated in sequence. The 3 V to 18 V operating range supports common industrial logic rails, while the DC clock-input circuit accommodates slower clock waveforms. Use the carry output to trigger an additional stage when more than ten steps are required, and apply asynchronous clear during initialization to establish a repeatable starting state.

🔧

Stepper-Motor Position Sequencing

The MC14017BD can generate a repeating ten-step sequence suitable for limited stepper-motor position indexing, rotary switch control, or actuator sequencing. Its ten decoded outputs provide mutually exclusive active states, avoiding multiple outputs being asserted during normal counting. Positive-going-edge clock updates make the device suitable for a clean external pulse source, and the inhibit input provides a convenient pause control. For continuous rotation, derive the motor drive command from the decoded outputs and clock source rather than attempting to power the motor directly from the logic IC.

⚙️

Programmable Logic Controller Counting

The MC14017BD is useful in PLC and embedded-control modules that need a compact decade counter for event counting, mode selection, or cyclic output generation. The five-stage Johnson architecture provides spike-free decoded outputs, helping prevent transient multiple-output states from disturbing connected logic. The 3 V to 18 V supply range supports both legacy control electronics and newer lower-voltage control sections. Clock inhibit can pause accumulation during a defined process interval, while asynchronous clear can reset the count at the start of a production cycle.

📡

Relay and Contact Sequence Control

The MC14017BD can sequentially energize one of ten control channels in a relay bank, indicator panel, or test fixture. The ten decoded outputs are normally low and become active only for their corresponding decimal time period, supporting a clean one-hot sequence. Its carry output allows a following counter stage to begin when the first decade completes, making multi-bank sequencing possible. Use suitable driver transistors or interface circuits for relay coils, and keep inductive loads electrically separated from the counter’s supply and signal paths.

🖥️

Test and Measurement Timing

The MC14017BD can divide a reference pulse into ten evenly timed sections for repetitive test equipment, signal generators, and measurement fixtures. Because the outputs change on the positive-going clock edge and the Johnson design suppresses output spikes, it is useful where predictable state transitions are required. The clock-inhibit input supports externally controlled measurement windows, and the carry output can trigger another divider or acquisition stage. Confirm maximum operating frequency and output transition timing for the selected temperature grade before using it in high-rate automated systems.

📺

Digital Clock and Display Sequencing

The MC14017BD can act as a decade sequencer in digital clocks, display multiplexers, and mode-selection circuits. Its ten outputs correspond to the ten states of a decimal count, allowing one output to advance an indicator, switch a display function, or initiate a timed interval. The built-in code converter removes the need for a separate binary-to-decimal decoder, simplifying compact logic designs. Use the carry output to increment a second decade, and use asynchronous clear to synchronize the display sequence with a master reset.

अनुशंसित उत्पादों का सारांश

MC14017BDG MC14017B-family decade counter for comparison उपयोग में: Industrial Timer and Sequencer, Stepper-Motor Position Sequencing, Programmable Logic Controller Counting, Test and Measurement Timing, Digital Clock and Display Sequencing MC14017BF onsemi उपयोग में: Industrial Timer and Sequencer, Programmable Logic Controller Counting, Relay and Contact Sequence Control, Test and Measurement Timing MC14017BD onsemi उपयोग में: Stepper-Motor Position Sequencing, Relay and Contact Sequence Control, Digital Clock and Display Sequencing
What is MC14017BD?
The MC14017BD is a 5-stage Johnson decade counter with a built-in code converter, operating from 3 V to 18 V in a 16-SOIC package. According to the onsemi MC14017B datasheet, it produces ten decoded outputs, changes state on the positive-going clock edge, and includes a carry output for extending the count beyond ten states.
How does the MC14017BD counter work?
The MC14017BD advances through ten decoded states whenever its clock receives a positive-going edge. The onsemi MC14017B datasheet identifies five Johnson stages and an integrated code converter; only the output corresponding to the current count is high. The clock-inhibit input pauses counting, while the asynchronous clear input resets the sequence for the next clock edge.
What is the operating voltage of MC14017BD?
The MC14017BD operates from 3 V to 18 V, allowing its 16-SOIC logic circuit to work with conventional 5 V and 12 V rails. The onsemi MC14017B datasheet identifies a fully static, single-supply implementation with a DC clock-input circuit designed to accept slowly rising clock waveforms.
Where can I download the MC14017BD datasheet PDF?
The manufacturer MC14017B datasheet PDF is available at https://www.onsemi.com/pdf/datasheet/mc14017b-d.pdf. It is the appropriate document for the MC14017B family because the MC14017BD is the D-grade, 16-SOIC ordering option. Use the pin-description table and electrical-characteristics section for final schematic and timing decisions.
Where is the MC14017BD pinout located?
The MC14017BD pinout is shown in the pin-configuration section of the onsemi MC14017B datasheet. The 16-SOIC device uses pins 1 through 16 for the clock, inhibit, clear, ten decoded outputs, supply, ground, and carry functions. The package pinout used on this page also identifies the standard counterclockwise numbering orientation.
Is MC14017BD the same as CD4017B?
The MC14017BD and CD4017B are both 10-state decade-counter devices with related CMOS counter functions, but they are separate manufacturer order codes and should not be treated as identical without checking every electrical limit and pin definition. Use the manufacturer MC14017B datasheet and the intended counterpart’s data sheet to verify supply voltage, timing, output-drive capability, reset behavior, and temperature-grade requirements.
What can replace MC14017BD?
A valid replacement for MC14017BD must provide the same 16-SOIC footprint, compatible pin functions, ten decoded outputs, 3 V to 18 V operation, and acceptable clock and output timing. The MC14017BDG and MC14017BF family references are candidates for comparison, while a historical Motorola MC14017BD is an exact manufacturer-lineage match. Confirm ordering and grade details against the relevant manufacturer datasheet before substitution.
What is the best Motorola equivalent for MC14017BD?
The historical Motorola MC14017BD is the closest manufacturer-lineage equivalent because it carries the same device designation and corresponds to the same MC14017B counter family. The onsemi MC14017B datasheet describes a 5-stage Johnson decade counter with ten decoded outputs and a carry output. Review temperature grade, package, clock timing, and supply-current limits before treating the historical and current order codes as interchangeable.
MC14017BD vs MC14017BDG - which should I select?
MC14017BD and MC14017BDG belong to the same MC14017B counter family, but the order-code suffixes can denote different qualification or packaging options. Both use the 16-SOIC architecture and five-stage decade-counter function described by onsemi. Compare the complete ordering table and temperature-grade specifications in the manufacturer MC14017B datasheet before choosing the version appropriate for your production environment.
When should I choose MC14017BD over another decade counter?
Choose the MC14017BD when a 10-state CMOS sequence, positive-edge clocking, clock inhibit, asynchronous clear, and carry output are required in a 16-SOIC footprint. It is particularly useful for legacy or industrial designs already standardized on the MC14017B pinout. Choose another device when its operating voltage, clock rate, output drive, temperature grade, or package differs materially from the MC14017B requirements.
Is MC14017BD suitable for industrial timer and sequencing circuits?
The MC14017BD is suitable for many industrial timer and sequencing circuits because it combines a 3 V to 18 V supply range, fully static operation, ten decoded outputs, and a carry output. The onsemi MC14017B datasheet also identifies a DC clock-input circuit that accommodates slow rise times. Validate the selected temperature grade and required timing margin for the installation environment.
Where can I buy MC14017BD and check current stock?
Use the Request a Quote form on this page to ask about MC14017BD availability, minimum order quantity, condition, and current lead time. Because this exact onsemi ordering option is listed as obsolete, the confirmation should also identify whether an approved alternate ordering code or an equivalent assembly is available. Do not substitute a part until its footprint and electrical characteristics have been reviewed.
What is the price of MC14017BD?
Current MC14017BD pricing is not displayed as a fixed static value on this page. Use the Request a Quote form to request the current unit price, quantity breaks, stock position, and expected lead time for the exact 16-SOIC ordering option. Because the device is obsolete, the quotation should explicitly confirm part condition, traceability, and whether any approved substitute is being quoted.
What is the lead time for MC14017BD?
The current lead time for MC14017BD should be confirmed through the Request a Quote form on this page, especially because the manufacturer’s listed lifecycle status is obsolete. A complete quotation should state the proposed quantity, package, condition, sourcing route, and expected delivery timing. Engineers should not base production planning on an obsolete part without an explicit availability confirmation.
Is MC14017BD in stock?
Stock for MC14017BD should be checked through the Request a Quote form on this page rather than inferred from general catalog availability. The manufacturer lists the device as obsolete, so the response should distinguish factory-new inventory from surplus or previously used stock. Confirm the exact MPN, 16-SOIC package, quantity, condition, and traceability before placing an order.
What are the key specifications of MC14017BD that engineers should know?
The principal MC14017BD specifications are a 3 V to 18 V supply range, five-stage Johnson counter architecture, ten decoded outputs, positive-going-edge operation, fully static behavior, clock inhibit, asynchronous clear, and a carry output. The onsemi MC14017B datasheet identifies the device in a 16-SOIC package. Maximum clock frequency, output drive, and operating-temperature limits require review in the full electrical tables.

के लिए इंजीनियरिंग संदर्भ डेटा MC14017BD — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MC14017BD for a legacy 16-SOIC design requiring a 5-stage Johnson decade counter, ten decoded outputs, clock inhibit, asynchronous clear, and a 3 V to 18 V supply. It is especially appropriate when an existing PCB already depends on the established MC14017B pin arrangement. MC14017BDG may be preferable when its ordering-table grade and availability better match the intended qualification requirements. MC14017BF should be evaluated when its specific suffix, temperature range, and lifecycle status align with the production program. The historical Motorola MC14017BD is useful for tracing older equipment, but traceability and current sourcing must be handled carefully. For any alternative, verify all 16 pins, clock timing, output-drive limits, supply current, reset behavior, and temperature range before approving a substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MC14017BD MC14017BDG MC14017BF
Brand onsemi Motorola onsemi onsemi
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Counter Architecture 5-stage Johnson counter 5-stage Johnson counter 5-stage Johnson counter 5-stage Johnson counter
Decoded Outputs 10 outputs 10 outputs 10 outputs 10 outputs

मुख्य विशेषताएँ

  • Integrated decimal code conversion (बनामMC14017BF)
  • Same-package family interchangeability (बनामMC14017BDG)
  • Historical manufacturer continuity (बनामMC14017BD)

डिज़ाइन नोट्स

Route the clock with a short, continuous path away from output and clock-inhibit traces. A positive-going edge advances the count, so ringing or a slow noisy transition near that edge can cause an incorrect count. The MC14017B DC clock-input circuit accepts slow rise times, but the external clock source should still provide a clean transition. For noisy systems, use a Schmitt-trigger buffer before the counter and maintain a defined clock level while reset is asserted.

Do not tie the clock-inhibit input to an undefined voltage, and do not drive the asynchronous clear input with a slow RC transition in a circuit that requires deterministic reset timing. Assert clear only when the clock source is in a known state, then release it before the first intended counting edge. The carry output is intended for chaining another decade stage and should not be treated as a substitute for a reset command.

Place the device to minimize the distance between the clock, inhibit, and clear inputs and their source circuits. Keep the 16-SOIC ground connection close to low-impedance return paths and provide a low-impedance supply plane connection. Although the MC14017B is a fully static counter, bypassing the supply locally helps maintain predictable switching behavior when several decoded outputs change in a system containing noisy relays, display drivers, or digital power stages.

Decoded counter outputs can transition simultaneously in surrounding circuitry, so validate the worst-case supply current and output loading for the selected operating frequency. Do not use the MC14017BD output pins directly for relay coils, lamps, or other inductive loads; use suitable driver stages. The carry output should likewise drive only compatible CMOS inputs or a properly designed interface, preserving the device’s voltage and current limits.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The product listing identifies the MC14017BD as RoHS compliant. Other environmental and material-compliance attributes require confirmation from the manufacturer or current supplier documentation.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC14017BD MC14017BD datasheet MC14017BD datasheet pdf MC14017BD pinout MC14017BD equivalent MC14017BD replacement MC14017BD cross reference onsemi MC14017BD MC14017BD 16-SOIC MC14017BD vs MC14017BDG MC14017BD price MC14017BD stock MC14017B decade counter MC14017BD application circuit MC14017BD schematic

संबंधित कंपोनेंट्स और शब्द

onsemi Motorola MC14017BD MC14017BDG MC14017BF MC14017B decade counter divide-by-10 counter Johnson counter counter and divider CMOS logic logic IC digital timing IC semiconductor 10-state sequence positive-going clock edge clock inhibit asynchronous clear carry output built-in code converter 16-SOIC SOIC family surface mount SMD package fully static operation spike-free outputs RoHS
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें