MC14017BD - 3-18V CMOS Decade Counter | onsemi
MPN: MC14017BD ✗ 停產MC14017BD 概覽
A decade counter, also called a divide-by-10 counter, belongs to the broader counter and divider hierarchy within CMOS logic and digital timing ICs. Unlike a binary counter, a decade counter produces ten mutually exclusive output states. The Johnson-counter architecture used in the MC14017B is designed to provide high-speed operation and spike-free decoded outputs while retaining fully static operation.
Key features include a five-stage Johnson counter, an integrated decimal code converter, ten decoded outputs, positive-going-edge clock updates, and a carry output for cascaded counting. Its 3 V to 18 V supply operation supports both 5 V and 12 V logic systems. The device is offered in a 16-SOIC surface-mount package, while the MC14017BD temperature-grade designation identifies a military-oriented version of the MC14017B family.
The MC14017B operates from a single positive supply referenced to ground. Its DC clock-input circuit accommodates slow clock rise times, while the decoded outputs change on the positive-going edge of the clock. A clock-inhibit input provides a second control path for pausing the count, and the asynchronous clear input resets the counter so that output Q0 becomes active for the next clock cycle.
Typical applications include decade sequencing, industrial timer and counter modules, stepper-motor position sequencing, programmable logic-controller counters, relay-bank activation sequences, test-equipment timing, and digital clock or display multiplexing. The carry output can also trigger a cascaded decade stage, allowing counters larger than ten states to be constructed with additional devices.
For robust implementations, treat the clock, inhibit, and asynchronous clear signals as logic inputs with defined levels during reset. Keep the clock path short to reduce susceptibility to ringing and multiple transitions near the active clock edge. Verify output timing and supply-current behavior across the full intended temperature range before releasing the design.
This page combines the manufacturer’s counter architecture, package and lifecycle information with drop-in family references, parameter comparisons, application guidance, and practical design notes for engineers evaluating the MC14017BD.
直接替換替代品,適用於 MC14017BD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC14017BD (相同外形與佔位) — 差異在於 Mounting Type, Operation Mode, Package.
MC14017BD
✅ 直接替換聯絡詢價
查看資料表 →MC14017BDG
✅ 直接替換📋 參考替代品(不在目錄中)
MC14017BD 最大額定值與電氣特性
| 功能 | 5-stage Johnson decade counter with built-in code converter |
| 工作電源電壓 | 3 V to 18 V |
| Counter Decoded Output Count | 10 outputs |
| Counter Architecture | 5-stage Johnson counter |
| Counting Edge | Positive-going clock edge |
| Clock Input Type | DC clock input |
| Operation Mode | Fully static |
| Output Behavior | Spike-free decoded outputs |
| Counter Element Count | 1 element |
| Counter Bit Count | 10 bits |
| Logic Polarity | Positive and negative |
| 封裝 | 16-SOIC, 3.90 mm width |
| 安裝類型 | Surface mount |
| RoHS 狀態 | RoHS compliant |
MC14017BD 腳位配置
| 腳位 1 | CLK — Clock input |
| 腳位 2 | CLK INH — Clock inhibit input |
| 腳位 3 | CLR — Asynchronous clear input |
| 腳位 4 | Q0 — Decoded output 0 |
| 腳位 5 | Q1 — Decoded output 1 |
| 腳位 6 | Q2 — Decoded output 2 |
| 腳位 7 | Q3 — Decoded output 3 |
| 腳位 8 | VSS — Ground reference |
| 腳位 9 | Q4 — Decoded output 4 |
| 腳位 10 | Q5 — Decoded output 5 |
| 腳位 11 | Q6 — Decoded output 6 |
| 腳位 12 | Q7 — Decoded output 7 |
| 腳位 13 | Q8 — Decoded output 8 |
| 腳位 14 | Q9 — Decoded output 9 |
| 腳位 15 | VDD — Positive supply input |
| 腳位 16 | CARRY — Carry output |
典型應用
MC14017BD 適用於 6 應用s: Industrial Timer and Sequencer, Stepper-Motor Position Sequencing, Programmable Logic Controller Counting, Relay and Contact Sequence Control, Test and Measurement Timing, Digital Clock and Display Sequencing.
Industrial Timer and Sequencer
The MC14017BD fits industrial timer and sequencer designs that require ten discrete output states. Its five-stage Johnson architecture and built-in code converter drive one decoded output for each count, allowing relays, indicators, or control stages to be activated in sequence. The 3 V to 18 V operating range supports common industrial logic rails, while the DC clock-input circuit accommodates slower clock waveforms. Use the carry output to trigger an additional stage when more than ten steps are required, and apply asynchronous clear during initialization to establish a repeatable starting state.
推薦
Stepper-Motor Position Sequencing
The MC14017BD can generate a repeating ten-step sequence suitable for limited stepper-motor position indexing, rotary switch control, or actuator sequencing. Its ten decoded outputs provide mutually exclusive active states, avoiding multiple outputs being asserted during normal counting. Positive-going-edge clock updates make the device suitable for a clean external pulse source, and the inhibit input provides a convenient pause control. For continuous rotation, derive the motor drive command from the decoded outputs and clock source rather than attempting to power the motor directly from the logic IC.
推薦
Programmable Logic Controller Counting
The MC14017BD is useful in PLC and embedded-control modules that need a compact decade counter for event counting, mode selection, or cyclic output generation. The five-stage Johnson architecture provides spike-free decoded outputs, helping prevent transient multiple-output states from disturbing connected logic. The 3 V to 18 V supply range supports both legacy control electronics and newer lower-voltage control sections. Clock inhibit can pause accumulation during a defined process interval, while asynchronous clear can reset the count at the start of a production cycle.
推薦
Relay and Contact Sequence Control
The MC14017BD can sequentially energize one of ten control channels in a relay bank, indicator panel, or test fixture. The ten decoded outputs are normally low and become active only for their corresponding decimal time period, supporting a clean one-hot sequence. Its carry output allows a following counter stage to begin when the first decade completes, making multi-bank sequencing possible. Use suitable driver transistors or interface circuits for relay coils, and keep inductive loads electrically separated from the counter’s supply and signal paths.
推薦
Test and Measurement Timing
The MC14017BD can divide a reference pulse into ten evenly timed sections for repetitive test equipment, signal generators, and measurement fixtures. Because the outputs change on the positive-going clock edge and the Johnson design suppresses output spikes, it is useful where predictable state transitions are required. The clock-inhibit input supports externally controlled measurement windows, and the carry output can trigger another divider or acquisition stage. Confirm maximum operating frequency and output transition timing for the selected temperature grade before using it in high-rate automated systems.
推薦
Digital Clock and Display Sequencing
The MC14017BD can act as a decade sequencer in digital clocks, display multiplexers, and mode-selection circuits. Its ten outputs correspond to the ten states of a decimal count, allowing one output to advance an indicator, switch a display function, or initiate a timed interval. The built-in code converter removes the need for a separate binary-to-decimal decoder, simplifying compact logic designs. Use the carry output to increment a second decade, and use asynchronous clear to synchronize the display sequence with a master reset.
推薦
推薦產品摘要
工程參考資料,適用於 MC14017BD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC14017BD | MC14017BDG | MC14017BF |
|---|---|---|---|---|
| Brand | onsemi | Motorola | onsemi | onsemi |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Counter Architecture | 5-stage Johnson counter | 5-stage Johnson counter | 5-stage Johnson counter | 5-stage Johnson counter |
| Decoded Outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs |
主要差異化特點
- Integrated decimal code conversion (對比MC14017BF)
- Same-package family interchangeability (對比MC14017BDG)
- Historical manufacturer continuity (對比MC14017BD)
設計說明
Route the clock with a short, continuous path away from output and clock-inhibit traces. A positive-going edge advances the count, so ringing or a slow noisy transition near that edge can cause an incorrect count. The MC14017B DC clock-input circuit accepts slow rise times, but the external clock source should still provide a clean transition. For noisy systems, use a Schmitt-trigger buffer before the counter and maintain a defined clock level while reset is asserted.
Do not tie the clock-inhibit input to an undefined voltage, and do not drive the asynchronous clear input with a slow RC transition in a circuit that requires deterministic reset timing. Assert clear only when the clock source is in a known state, then release it before the first intended counting edge. The carry output is intended for chaining another decade stage and should not be treated as a substitute for a reset command.
Place the device to minimize the distance between the clock, inhibit, and clear inputs and their source circuits. Keep the 16-SOIC ground connection close to low-impedance return paths and provide a low-impedance supply plane connection. Although the MC14017B is a fully static counter, bypassing the supply locally helps maintain predictable switching behavior when several decoded outputs change in a system containing noisy relays, display drivers, or digital power stages.
Decoded counter outputs can transition simultaneously in surrounding circuitry, so validate the worst-case supply current and output loading for the selected operating frequency. Do not use the MC14017BD output pins directly for relay coils, lamps, or other inductive loads; use suitable driver stages. The carry output should likewise drive only compatible CMOS inputs or a properly designed interface, preserving the device’s voltage and current limits.
合規資訊
The product listing identifies the MC14017BD as RoHS compliant. Other environmental and material-compliance attributes require confirmation from the manufacturer or current supplier documentation.