NXP Semiconductors

MC145481EG - 6-Bit PCM Audio Codec | NXP | 20-SOIC

MPN: MC145481EG ✓ सक्रिय
3 V Vdss 20-SOIC, 0.295 inch width Package
न्यूनतम ऑर्डर मात्रा: 1 |

MC145481EG अवलोकन

NXP MC145481EG is a 6-bit PCM codec and filter with one ADC and one DAC, selectable Mu-Law or A-Law companding, and a 20-pin SOIC package. The device converts between analog audio signals and PCM-coded digital streams, making it suitable for telephony, voice processing, communications, and embedded audio interfaces that require a compact companding codec.

A PCM codec is an interface IC that combines an analog-to-digital converter, digital-to-analog converter, and digital signal-processing functions. The ADC samples an analog input into a digital PCM representation, while the DAC reconstructs an analog output from a digital PCM stream. Mu-Law and A-Law companding are logarithmic compression formats commonly associated with telephone speech, reducing the word length required for acceptable speech quality.

The MC145481EG provides one ADC channel and one DAC channel with 6-bit digital resolution. Its pin-selectable Mu-Law or A-Law companding allows one device to support either major North American or international telephony companding convention. The 20-SOIC package is approximately 0.295 inch wide and uses a surface-mount assembly process compatible with conventional PCB manufacturing and automated inspection.

Internally, the codec organizes the conversion path around analog input and output stages, digital PCM conversion, and companding logic. The filtering function is important because it limits unwanted signal components and provides the bandwidth shaping expected by the PCM audio channel. Because the converter resolution is 6 bit rather than the 16 to 24 bits commonly found in modern general-purpose audio codecs, the MC145481EG is best understood as a specialized speech and communications device rather than a high-fidelity entertainment codec.

Typical uses include telephone interface circuits, pulse-code-modulation voice terminals, speech-processing equipment, and embedded systems that communicate through Mu-Law or A-Law PCM channels. Its single ADC and single DAC structure keeps channel count and external circuitry modest, while the integrated codec and filter functions reduce the need for separate conversion and filtering blocks.

PCB design should preserve short analog signal paths and provide clean supply decoupling near the device. Use the manufacturer pin-description table when assigning tracks, particularly for analog supply, digital supply, clock, data, and companding-control connections. Check the device's absolute maximum ratings, recommended operating conditions, and external-component requirements before selecting bypass capacitors or terminating unused inputs.

This product page organizes the verified part identity, package information, technical specifications, sourcing workflow, and design considerations for engineers evaluating the MC145481EG. The MC145481EG datasheet is the primary authority for pin assignments, timing, electrical limits, and application-specific implementation details.

के लिए ड्रॉप-इन विकल्प MC145481EG — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

MC145481EG विशेषताएं

Device Type PCM Codec/Filter
ADC Count 1
DAC Count 1
रेज़ोल्यूशन 6 bit
Companding Pin-selectable Mu-Law or A-Law
सप्लाई वोल्टेज 3 V
पैकेज 20-SOIC, 0.295 inch width
माउंटिंग प्रकार Surface Mount
Signal Type Analog and PCM digital audio
Channel Architecture Single ADC channel and single DAC channel
Product Category Integrated audio interface
Manufacturer NXP Semiconductors

MC145481EG 20-soic, 0.295 inch width पिन कॉन्फ़िगरेशन गाइड

MC145481EG (20-soic, 0.295 inch width पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MC145481EG के लिए 20-soic, 0.295 inch width पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC145481EG.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MC145481EG के लिए उपयुक्त है 6 अनुप्रयोगs: Mu-Law Telephone Interface, A-Law Voice Terminal, Speech Processing Equipment, PCM Communication Controller, Voice Monitoring Module, Industrial Voice Control Panel.

🌐

Mu-Law Telephone Interface

The MC145481EG fits Mu-Law PCM telephone interfaces because it combines one ADC, one DAC, and selectable companding in one 20-SOIC package. A voice signal can enter the analog input, pass through the codec and filter functions, and leave as a 6-bit PCM stream. This integration reduces the number of separate conversion blocks in legacy telephone equipment. The principal trade-off is resolution: 6-bit performance is appropriate for established Mu-Law voice paths but does not match modern 16-bit or 24-bit audio converters.

📱

A-Law Voice Terminal

The MC145481EG is suitable for an A-Law voice terminal that must exchange compact PCM samples with a digital line. Its pin-selectable A-Law mode supports systems based on the international telephony convention, while the single ADC and single DAC provide the essential transmit and receive paths. The device is most useful when maintaining compatibility with an existing A-Law network interface. Designers should preserve the established clock and data timing because the 20-SOIC codec is intended for compact legacy voice signaling rather than modern packet-audio architectures.

🎧

Speech Processing Equipment

The MC145481EG can serve as the analog-to-PCM and PCM-to-analog boundary in speech-processing equipment. Digitized samples produced by the 6-bit ADC can enter a downstream speech processor, while the DAC reconstructs the analog voice output from the returning PCM stream. The integrated filter and companding functions make the device useful in compact speech terminals, recording interfaces, and communication controllers. Its bandwidth and resolution are the decisive limits, so the application should accept companded voice quality rather than full-spectrum audio fidelity.

🖥️

PCM Communication Controller

The MC145481EG pairs well with a communication controller that expects 6-bit Mu-Law or A-Law PCM rather than I2S audio. The controller can provide clock and frame information, exchange serial data with the codec, and use the analog channel for voice input or output. The single-channel topology is appropriate for one active speech path and keeps the external interface compact. Clock-rate tolerance, data timing, framing format, and signal levels must match the system specification because the MC145481EG is a dedicated PCM codec rather than a general-purpose serial audio converter.

🏭

Voice Monitoring Module

A voice monitoring module can use the MC145481EG to convert an analog line-level or suitably conditioned voice signal into 6-bit companded PCM for monitoring or processing. The integrated codec-filter arrangement reduces the need for separate ADC and reconstruction stages in a small implementation. Because this is a single-channel voice device, a full-duplex monitoring design still requires appropriate signal conditioning and clocking. The low-resolution output should be used for speech recognition or diagnostic feedback, not archival-quality recording where wider bandwidth and greater dynamic range are required.

🏭

Industrial Voice Control Panel

The MC145481EG can be incorporated into an industrial voice-control panel built around an established PCM voice bus. Its ADC path supports the control panel's microphone input, and its DAC path supports the audio output, while Mu-Law or A-Law selection allows compatibility with the plant's communication convention. The 20-SOIC package supports compact surface-mount construction. Designers should account for the codec's 3 V supply requirement and 6-bit resolution, and should provide hardware noise control around the analog microphone input for dependable voice-command recognition.

What is the MC145481EG?
The MC145481EG is a single-channel PCM audio codec and filter manufactured by NXP Semiconductors. According to the manufacturer part description, it combines one ADC and one DAC, provides 6-bit resolution, and supports pin-selectable Mu-Law or A-Law companding in a 20-SOIC package. It is intended for compact PCM voice and telecommunications interfaces rather than high-resolution music playback.
What are the key specifications of MC145481EG that engineers should know?
The MC145481EG provides one ADC, one DAC, 6-bit resolution, selectable Mu-Law or A-Law companding, and a 20-SOIC package. The listed operating supply is 3 V, and the package is approximately 0.295 inch wide. Its channel count and companding support distinguish it from general-purpose 16-bit or 24-bit audio codecs used in music, voice recording, and high-fidelity playback equipment.
Where can I download the MC145481EG datasheet PDF?
The MC145481EG datasheet can be reached through the technical document page linked on this product page. The accessible datasheet listing identifies the device as a general-purpose per-channel PCM codec-filter with pin-selectable Mu-Law or A-Law companding. Use the manufacturer datasheet as the controlling document for pin names, timing, absolute maximum ratings, and recommended external components.
Where can I find the MC145481EG pinout?
The MC145481EG pinout is defined by the manufacturer datasheet for the 20-pin SOIC package. Assign PCB tracks using the datasheet pin-description table because the package contains separate analog and digital functions plus clock, data, and companding-related connections. Do not infer pin functions from the 20-pin count or from similarly named codec devices.
Is the MC145481EG a 6-bit audio codec?
Yes, the MC145481EG is a 6-bit PCM codec and filter with one ADC and one DAC. Its 6-bit resolution and Mu-Law or A-Law companding place it in the telephony and low-bandwidth PCM speech domain. It is not a substitute for a 16-bit or 24-bit high-fidelity converter when waveform accuracy, audio bandwidth, or dynamic-range requirements exceed those of a companded voice channel.
What is the difference between Mu-Law and A-Law in the MC145481EG?
Mu-Law and A-Law are two logarithmic PCM companding formats supported through pin selection on the MC145481EG. Mu-Law is commonly associated with North American telephone systems, while A-Law is widely used in international telecommunications networks. The available MC145481EG documentation does not state a numeric companding-performance difference, so system requirements should determine which convention must be configured.
Where can I buy MC145481EG online?
The MC145481EG can be requested through the Request a Quote form on this page. The form is the appropriate channel for checking current availability, lead time, order quantity, and the exact MC145481EG package suffix before placing an order. Use the part number MC145481EG exactly when requesting a quotation.
What is the price of MC145481EG?
Current MC145481EG commercial terms are handled through the Request a Quote form on this page. Submit the exact MPN and required quantity to obtain a current offer, including packaging, delivery, and availability details. This avoids treating an archived catalog value as a present-day quotation for the 20-SOIC device.
What is the lead time for MC145481EG?
The current MC145481EG lead time should be confirmed through the Request a Quote form on this page. The component is offered as an integrated circuit in a 20-SOIC package, but no fixed manufacturing or distribution interval should be assumed without a current quotation. Include the required quantity, target date, and approved supplier conditions in the request.
Is MC145481EG in stock?
MC145481EG stock status is handled through the Request a Quote form on this page. Submit the exact part number and required quantity to obtain a current availability response. Because the commercial status of legacy PCM codec devices can vary by volume and sourcing channel, the quotation response is the appropriate purchasing record.
When should I choose MC145481EG over a modern audio codec?
Choose the MC145481EG when an existing PCM voice interface requires a 6-bit Mu-Law or A-Law codec in a 20-SOIC footprint. A modern audio codec is preferable when the system needs higher resolution, wider audio bandwidth, lower digital storage demand, or interfaces such as I2S that the MC145481EG does not provide. Backward compatibility with the established PCM architecture is the main reason to retain this device.
Is MC145481EG suitable for telephone and speech applications?
The MC145481EG is suitable for telephone and speech applications that use Mu-Law or A-Law PCM and can operate with 6-bit resolution. Its integrated ADC, DAC, filter, and companding functions provide a compact interface for digitized speech. A modern codec should be selected if the system requires music-quality signal fidelity, wider bandwidth, or a different digital audio format.
What is the best drop-in replacement for MC145481EG?
No verified pin-compatible drop-in replacement for the MC145481EG is identified on this page. A valid replacement must match the 20-SOIC footprint, pin assignment, 3 V supply arrangement, 6-bit Mu-Law or A-Law PCM behavior, clocking, and signal levels. Do not treat a codec with a similar function as drop-in unless its manufacturer confirms electrical and pin compatibility.
Can another 20-SOIC PCM codec replace MC145481EG?
Another 20-SOIC PCM codec can replace the MC145481EG only after its pinout and operating behavior have been verified against the manufacturer datasheets. Matching the package alone is insufficient because clock polarity, data timing, companding logic, control inputs, analog levels, and supply rails must align. Request manufacturer compatibility information before modifying an existing design.
What NXP equivalent should replace MC145481EG?
No confirmed NXP equivalent is available for the MC145481EG based on the verified product and cross-reference information. Use NXP's component-selection resources to identify a current codec with the required 6-bit Mu-Law or A-Law behavior, but validate the complete pinout and electrical characteristics before treating it as a drop-in replacement. Similar codec functionality alone does not establish compatibility.
How should the MC145481EG be decoupled for reliable PCB operation?
Place the required bypass capacitors close to the device's analog and digital supply pins, and follow the manufacturer layout recommendations for separating noisy digital return currents from sensitive analog paths. The MC145481EG operates from a listed 3 V supply and uses the 20-SOIC package. Capacitor values, placement, and allowable voltage ratings must follow the manufacturer application guidance rather than generic assumptions.

के लिए इंजीनियरिंग संदर्भ डेटा MC145481EG — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MC145481EG when maintaining or designing a compact PCM voice system that specifically requires 6-bit resolution, one ADC channel, one DAC channel, and selectable Mu-Law or A-Law companding in a 20-SOIC package. It is particularly appropriate for legacy telephony, speech-processing, and communication-controller interfaces. Choose a modern audio codec instead when the design requires 16-bit or higher resolution, music-grade bandwidth, lower digital data rates, I2S, or improved noise performance. No confirmed drop-in substitute is identified, so any proposed alternative must be checked for an exact pin assignment, 3 V operation, compatible clock and data timing, equivalent companding behavior, matching analog signal levels, and the same external-component requirements. Package equivalence alone is not sufficient for a safe replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Brand NXP Semiconductors
Package 20-SOIC, 0.295 inch width
Device Type PCM Codec/Filter
ADC Channels 1
DAC Channels 1
Resolution 6 bit
Companding Pin-selectable Mu-Law or A-Law
Supply Voltage 3 V
Mounting Type Surface Mount

मुख्य विशेषताएँ

  • Integrated single-channel codec and filter (बनामNo verified drop-in equivalent)
  • Support for two telephony companding formats (बनामNo verified drop-in equivalent)
  • Compact legacy PCM conversion (बनामNo verified drop-in equivalent)

डिज़ाइन नोट्स

Use the manufacturer pin-description and layout guidance when assigning the 20-SOIC footprint. Keep analog input and output traces short, place bypass capacitors at the corresponding supply pins, and route digital clock and data connections away from the analog signal path. The SOIC's 1.27 mm lead pitch requires careful trace-clearance review during PCB layout and assembly.

Treat the PCM clock and data interfaces as synchronous signals. Confirm clock frequency, edge relationships, and setup or hold requirements against the manufacturer timing diagram. Use a continuous ground reference beneath the device where practical, minimize stubs, and maintain a quiet analog return path to reduce susceptibility to switching noise from the surrounding control circuitry.

Do not select a similarly packaged PCM codec solely because it offers Mu-Law or A-Law. A replacement must also match the MC145481EG pinout, 3 V supply arrangement, serial timing, analog levels, filtering behavior, and companding control method. Verify unused input states and required external components before authorizing a drop-in substitution.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for MC145481EG. AEC-Q100 is not applicable to this general-purpose communications interface device.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC145481EG datasheet MC145481EG pinout MC145481EG datasheet pdf MC145481EG equivalent MC145481EG replacement MC145481EG cross reference NXP MC145481EG MC145481EG 20-SOIC MC145481EG 6 bit PCM codec MC145481EG Mu-Law A-Law MC145481EG price MC145481EG stock

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors MC145481EG PCM codec PCM codec-filter audio codec interface IC semiconductor Mu-Law A-Law companding analog-to-digital converter digital-to-analog converter 6-bit resolution 20-SOIC SOIC family surface mount SMD package telephone interface speech processing PCM digital audio 3 V power supply single-channel audio NXP cross reference RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें