MC145481EG - 6-Bit PCM Audio Codec | NXP | 20-SOIC
部品番号: MC145481EG ✓ 生産中MC145481EG 概要
A PCM codec is an interface IC that combines an analog-to-digital converter, digital-to-analog converter, and digital signal-processing functions. The ADC samples an analog input into a digital PCM representation, while the DAC reconstructs an analog output from a digital PCM stream. Mu-Law and A-Law companding are logarithmic compression formats commonly associated with telephone speech, reducing the word length required for acceptable speech quality.
The MC145481EG provides one ADC channel and one DAC channel with 6-bit digital resolution. Its pin-selectable Mu-Law or A-Law companding allows one device to support either major North American or international telephony companding convention. The 20-SOIC package is approximately 0.295 inch wide and uses a surface-mount assembly process compatible with conventional PCB manufacturing and automated inspection.
Internally, the codec organizes the conversion path around analog input and output stages, digital PCM conversion, and companding logic. The filtering function is important because it limits unwanted signal components and provides the bandwidth shaping expected by the PCM audio channel. Because the converter resolution is 6 bit rather than the 16 to 24 bits commonly found in modern general-purpose audio codecs, the MC145481EG is best understood as a specialized speech and communications device rather than a high-fidelity entertainment codec.
Typical uses include telephone interface circuits, pulse-code-modulation voice terminals, speech-processing equipment, and embedded systems that communicate through Mu-Law or A-Law PCM channels. Its single ADC and single DAC structure keeps channel count and external circuitry modest, while the integrated codec and filter functions reduce the need for separate conversion and filtering blocks.
PCB design should preserve short analog signal paths and provide clean supply decoupling near the device. Use the manufacturer pin-description table when assigning tracks, particularly for analog supply, digital supply, clock, data, and companding-control connections. Check the device's absolute maximum ratings, recommended operating conditions, and external-component requirements before selecting bypass capacitors or terminating unused inputs.
This product page organizes the verified part identity, package information, technical specifications, sourcing workflow, and design considerations for engineers evaluating the MC145481EG. The MC145481EG datasheet is the primary authority for pin assignments, timing, electrical limits, and application-specific implementation details.
ドロップイン代替品: MC145481EG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMC145481EG 仕様
| Device Type | PCM Codec/Filter |
| ADC Count | 1 |
| DAC Count | 1 |
| 分解能 | 6 bit |
| Companding | Pin-selectable Mu-Law or A-Law |
| 電源電圧 | 3 V |
| パッケージ | 20-SOIC, 0.295 inch width |
| 実装タイプ | Surface Mount |
| Signal Type | Analog and PCM digital audio |
| Channel Architecture | Single ADC channel and single DAC channel |
| Product Category | Integrated audio interface |
| Manufacturer | NXP Semiconductors |
MC145481EG 20-soic, 0.295 inch width ピン配置ガイド
MC145481EG (20-soic, 0.295 inch width パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MC145481EG.
詳細は データシート をご参照ください。
主な用途
MC145481EG の用途: 6 件s: Mu-Law Telephone Interface, A-Law Voice Terminal, Speech Processing Equipment, PCM Communication Controller, Voice Monitoring Module, Industrial Voice Control Panel.
Mu-Law Telephone Interface
The MC145481EG fits Mu-Law PCM telephone interfaces because it combines one ADC, one DAC, and selectable companding in one 20-SOIC package. A voice signal can enter the analog input, pass through the codec and filter functions, and leave as a 6-bit PCM stream. This integration reduces the number of separate conversion blocks in legacy telephone equipment. The principal trade-off is resolution: 6-bit performance is appropriate for established Mu-Law voice paths but does not match modern 16-bit or 24-bit audio converters.
A-Law Voice Terminal
The MC145481EG is suitable for an A-Law voice terminal that must exchange compact PCM samples with a digital line. Its pin-selectable A-Law mode supports systems based on the international telephony convention, while the single ADC and single DAC provide the essential transmit and receive paths. The device is most useful when maintaining compatibility with an existing A-Law network interface. Designers should preserve the established clock and data timing because the 20-SOIC codec is intended for compact legacy voice signaling rather than modern packet-audio architectures.
Speech Processing Equipment
The MC145481EG can serve as the analog-to-PCM and PCM-to-analog boundary in speech-processing equipment. Digitized samples produced by the 6-bit ADC can enter a downstream speech processor, while the DAC reconstructs the analog voice output from the returning PCM stream. The integrated filter and companding functions make the device useful in compact speech terminals, recording interfaces, and communication controllers. Its bandwidth and resolution are the decisive limits, so the application should accept companded voice quality rather than full-spectrum audio fidelity.
PCM Communication Controller
The MC145481EG pairs well with a communication controller that expects 6-bit Mu-Law or A-Law PCM rather than I2S audio. The controller can provide clock and frame information, exchange serial data with the codec, and use the analog channel for voice input or output. The single-channel topology is appropriate for one active speech path and keeps the external interface compact. Clock-rate tolerance, data timing, framing format, and signal levels must match the system specification because the MC145481EG is a dedicated PCM codec rather than a general-purpose serial audio converter.
Voice Monitoring Module
A voice monitoring module can use the MC145481EG to convert an analog line-level or suitably conditioned voice signal into 6-bit companded PCM for monitoring or processing. The integrated codec-filter arrangement reduces the need for separate ADC and reconstruction stages in a small implementation. Because this is a single-channel voice device, a full-duplex monitoring design still requires appropriate signal conditioning and clocking. The low-resolution output should be used for speech recognition or diagnostic feedback, not archival-quality recording where wider bandwidth and greater dynamic range are required.
Industrial Voice Control Panel
The MC145481EG can be incorporated into an industrial voice-control panel built around an established PCM voice bus. Its ADC path supports the control panel's microphone input, and its DAC path supports the audio output, while Mu-Law or A-Law selection allows compatibility with the plant's communication convention. The 20-SOIC package supports compact surface-mount construction. Designers should account for the codec's 3 V supply requirement and 6-bit resolution, and should provide hardware noise control around the analog microphone input for dependable voice-command recognition.
エンジニアリング参考データ: MC145481EG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | NXP Semiconductors |
| Package | 20-SOIC, 0.295 inch width |
| Device Type | PCM Codec/Filter |
| ADC Channels | 1 |
| DAC Channels | 1 |
| Resolution | 6 bit |
| Companding | Pin-selectable Mu-Law or A-Law |
| Supply Voltage | 3 V |
| Mounting Type | Surface Mount |
主な差別化要因
- Integrated single-channel codec and filter (vs No verified drop-in equivalent)
- Support for two telephony companding formats (vs No verified drop-in equivalent)
- Compact legacy PCM conversion (vs No verified drop-in equivalent)
設計ノート
Use the manufacturer pin-description and layout guidance when assigning the 20-SOIC footprint. Keep analog input and output traces short, place bypass capacitors at the corresponding supply pins, and route digital clock and data connections away from the analog signal path. The SOIC's 1.27 mm lead pitch requires careful trace-clearance review during PCB layout and assembly.
Treat the PCM clock and data interfaces as synchronous signals. Confirm clock frequency, edge relationships, and setup or hold requirements against the manufacturer timing diagram. Use a continuous ground reference beneath the device where practical, minimize stubs, and maintain a quiet analog return path to reduce susceptibility to switching noise from the surrounding control circuitry.
Do not select a similarly packaged PCM codec solely because it offers Mu-Law or A-Law. A replacement must also match the MC145481EG pinout, 3 V supply arrangement, serial timing, analog levels, filtering behavior, and companding control method. Verify unused input states and required external components before authorizing a drop-in substitution.
コンプライアンス情報
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for MC145481EG. AEC-Q100 is not applicable to this general-purpose communications interface device.