NXP Semiconductors

MC145481SD - PCM Codec-Filter, 6-bit, 20-SSOP | NXP

MPN: MC145481SD ✗ जीवन की समाप्ति
3 V Vdss 20-SSOP Package Short Frame Sync, Long Frame Sync, IDL, and GCI Speed
न्यूनतम ऑर्डर मात्रा: 1 |

MC145481SD अवलोकन

The NXP MC145481SD is a 3 V PCM codec-filter for digital telephony and audio interfaces, with selectable mu-law or A-law companding, 6-bit conversion, and a 20-pin SSOP package. It is designed for systems that require a compact PCM voice interface rather than a general-purpose audio codec.

A PCM codec-filter is a semiconductor that converts between analog voice signals and serialized PCM data while applying digital companding. The MC145481SD belongs to the codec and filter category within interface ICs, and it can support telecom, telephony, and embedded voice-processing systems. Its serial interface reduces the number of connections required between an analog voice path and a digital processor.

The MC145481SD provides a 1-channel analog-to-digital converter and 1-channel digital-to-analog converter, with a stated 6-bit conversion resolution. Pin-selectable mu-law or A-law companding allows the system to choose the compression characteristic required by the connected equipment. The device also supports multiple clock formats, including short frame sync, long frame sync, IDL, and GCI timing environments.

The device operates from a 3 V supply and is offered in a 20-pin SSOP package with gull-wing leads. Its industrial temperature grade and CMOS implementation make it suitable for compact communication equipment where a simple, low-power voice codec is preferred over a higher-resolution multimedia audio device. The MC145481SD is also compatible with a family of NXP telecommunication interface products, including U-Interface transceivers, S/T-Interface transceivers, ADPCM transceivers, and other PCM-related devices.

Typical uses include digital telephone handsets, voice gateways, line-card signal paths, industrial voice terminals, and legacy PCM switching equipment. Because the MC145481SD is a dedicated voice codec-filter, it should be selected when the system requires mu-law or A-law companding and a compact PCM interface. It is not intended to replace a modern stereo audio codec in applications requiring higher-resolution playback, wider bandwidth, or integrated digital audio amplifiers.

For a new design, verify the clock timing, companding selection, analog levels, and pin assignments against the manufacturer datasheet before layout. In a replacement design, check that the board uses the 20-SSOP footprint and that the required timing and interface functions are unchanged. This page combines the documented MC145481SD characteristics with practical guidance for sourcing, comparison, and design integration.

के लिए ड्रॉप-इन विकल्प MC145481SD — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

MC145481SD Maximum Ratings और Electrical Characteristics

Product Type PCM codec-filter
Number of ADCs 1
Number of DACs 1
Conversion Resolution 6 bit
सप्लाई वोल्टेज 3 V
Companding Pin-selectable mu-law or A-law
इंटरफ़ेस प्रकार Serial PCM
Clock Formats Short Frame Sync, Long Frame Sync, IDL, and GCI
पैकेज 20-SSOP
Terminal Count 20
Lead Form Gull wing
Temperature Grade Industrial
Process Technology CMOS
माउंटिंग प्रकार Surface mount

MC145481SD 20-ssop पिन कॉन्फ़िगरेशन गाइड

MC145481SD (20-ssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MC145481SD के लिए 20-ssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC145481SD.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MC145481SD के लिए उपयुक्त है 6 अनुप्रयोगs: Digital Telephony Voice Interface, Voice Gateway and Line-Card Interface, Industrial Voice Terminal, Legacy PCM Switching Equipment, Embedded Voice Processor Front End, Two-Way Voice Communication Terminal.

📱

Digital Telephony Voice Interface

The MC145481SD fits digital telephone and private-branch voice interfaces because it combines one analog-to-digital conversion channel, one digital-to-analog conversion channel, and serial PCM signaling in a 20-SSOP package. Its 3 V operation aligns with compact telephone endpoint logic, while mu-law or A-law selection supports the signaling convention used by the connected network. The device accepts Short Frame Sync, Long Frame Sync, IDL, and GCI timing environments, allowing a common codec-filter to serve several legacy PCM architectures. Designers should verify the required companding mode, analog input and output levels, and exact clock timing before releasing the PCB layout.

🌐

Voice Gateway and Line-Card Interface

The MC145481SD is suitable for a voice gateway or line-card signal path that must translate a narrowband analog voice channel into a serialized PCM stream. Its single-channel 6-bit ADC and DAC match legacy telecom voice channels, while the selectable companding characteristic provides compatibility with mu-law and A-law systems. The 20-SSOP package limits board area compared with larger through-hole codecs and supports compact peripheral boards. Integration requires attention to analog grounding, frame synchronization, and clock jitter so that the codec-filter remains synchronized to the line-card processor and switching backplane.

🏭

Industrial Voice Terminal

The MC145481SD can support industrial voice terminals that require a compact PCM voice path instead of a multimedia audio codec. Its 3 V CMOS implementation, single analog channel, and selectable companding are appropriate for equipment with dedicated speech processing. The serial PCM interface reduces wiring between the codec-filter and the application processor compared with parallel converters, helping preserve board area in compact industrial enclosures. Because the conversion resolution is 6 bit and the device is optimized for companded voice, verify intelligibility, signal-to-noise requirements, and environmental operating conditions before selecting it for high-fidelity monitoring or entertainment audio.

🔧

Legacy PCM Switching Equipment

The MC145481SD is applicable to maintenance and expansion of legacy PCM switching equipment that uses compatible short-frame or long-frame telecom timing. Supporting Short Frame Sync, Long Frame Sync, IDL, and GCI formats gives the codec-filter flexibility across several older transport arrangements. The device can provide the compact analog-to-digital and digital-to-analog conversion stage expected by those systems. Engineers should compare the original equipment's frame structure, companding convention, analog level plan, and clock source with the manufacturer timing diagrams. This is especially important in telecom systems where a timing mismatch can produce intermittent framing errors rather than a simple loss of function.

🧩

Embedded Voice Processor Front End

The MC145481SD can serve as the analog voice front end of an embedded processor system that consumes or produces serialized PCM data. Its 6-bit conversion resolution is appropriate for narrowband speech interfaces, and pin-selected companding allows software and hardware teams to align the codec-filter with the selected telecom coding convention. The 20-SSOP package is practical for compact embedded boards, but careful layout is needed to isolate analog and digital return currents. Keep the codec supply path short, provide stable analog reference conditions, and route frame-sync and clock signals according to the manufacturer timing guidance to minimize data errors.

🎧

Two-Way Voice Communication Terminal

The MC145481SD supports two-way narrowband voice communication through its matched single-channel ADC and DAC paths. The same device handles PCM encoding in the transmit direction and PCM decoding in the receive direction, simplifying the component count in a compact terminal. Selectable mu-law or A-law operation supports common regional telecom conventions, while the 20-SSOP footprint enables replacement designs to reuse a small circuit footprint. The integration trade-off is limited audio bandwidth and 6-bit resolution, so the MC145481SD should be used for speech communication rather than music, broadband audio, or applications requiring high-fidelity storage.

What is the MC145481SD?
The MC145481SD is a dedicated single-channel PCM codec-filter for digital voice and telephony interfaces. According to the NXP MC145481 datasheet, it includes one ADC, one DAC, 6-bit conversion resolution, and pin-selectable mu-law or A-law companding, all in a 20-pin SSOP package.
What is the operating voltage of MC145481SD?
The MC145481SD operates from a 3 V supply. The NXP datasheet identifies the device as a 3 V PCM codec-filter, which makes it suitable for compact communication equipment designed around low-voltage CMOS logic. Confirm supply tolerance, analog input range, and digital interface levels in the manufacturer datasheet before finalizing a circuit.
What resolution does MC145481SD provide?
The MC145481SD provides 6-bit conversion resolution with one ADC and one DAC. The NXP datasheet describes it as a general-purpose per-channel PCM codec-filter with selectable mu-law or A-law companding. It is intended for voice interfaces rather than high-fidelity stereo audio.
Can MC145481SD be used for digital telephone applications?
Yes, the MC145481SD is appropriate for digital telephony and compact voice interfaces because it provides a single PCM codec-filter channel with mu-law or A-law companding. Its serial PCM interface and 3 V operation suit equipment where analog voice conversion must connect to a digital processor.
What is the difference between MC145481SD and MC145481?
MC145481SD denotes the specified 20-SSOP ordering configuration of the MC145481 family, while MC145481 is the broader device designation. The verified product information identifies the SD part as a 20-pin SSOP PCM codec-filter. Use the package-specific ordering information and datasheet when comparing suffixes.
Where can I download the MC145481SD datasheet PDF?
The MC145481SD datasheet PDF is available from the official NXP document page at https://www.nxp.com/docs/en/data-sheet/MC145481.pdf. The document is the best source for pin assignments, electrical characteristics, clock timing, analog levels, and the exact 20-SSOP package drawing.
Where can I find the MC145481SD pinout?
The MC145481SD pinout is shown in the manufacturer MC145481 datasheet, including the 20-SSOP pin-description and connection diagrams. Assign PCB tracks directly from that table so clock, frame-sync, analog, power, and companding-control functions are connected to the correct pins.
What clock formats does MC145481SD support?
The MC145481SD supports Short Frame Sync, Long Frame Sync, IDL, and GCI timing environments. According to the NXP datasheet, this flexible timing support allows the codec-filter to interface with multiple PCM telecom architectures. The host clock and frame configuration must match the system timing diagram.
How do mu-law and A-law companding affect MC145481SD selection?
The MC145481SD allows mu-law or A-law companding to be selected through its pin interface. Mu-law is common in North American digital telephony, while A-law is common in many international systems. Choose the companding mode required by the connected exchange or voice processor and configure the PCB accordingly.
Where to buy MC145481SD online?
Use the Request a Quote form on this page to request current MC145481SD availability, order quantities, and delivery scheduling. Because the MC145481SD is an obsolete legacy codec, current supply may be limited and may depend on remaining factory or authorized-channel inventory. The form avoids stale stock assumptions.
What is the price of MC145481SD?
Current MC145481SD commercial terms depend on available inventory, package condition, and order quantity. Use the Request a Quote form on this page for the current quotation. The part is a legacy PCM codec-filter, so request written confirmation of condition, traceability, and shipment timing before releasing a production order.
What is the lead time for MC145481SD?
The MC145481SD lead time is quote-dependent because the device is obsolete and remaining inventory can be limited. Submit the quantity and target delivery date through the Request a Quote form on this page. Do not base a production schedule on generic catalog availability for this legacy part.
Is MC145481SD in stock?
Current MC145481SD stock should be confirmed through the Request a Quote form on this page. The device is listed as an obsolete legacy PCM codec-filter, and distributor listings may not represent synchronized inventory. A quotation response should confirm quantity, condition, and delivery allocation.
What is the best drop-in replacement for MC145481SD?
No confirmed drop-in replacement for MC145481SD is established by the available cross-reference results. A valid replacement would require the same 20-SSOP footprint, pin-to-pin signal compatibility, 3 V operation, equivalent PCM timing, and supported mu-law or A-law companding. Request cross-reference support with the original schematic and timing requirements.
Can W681310RG replace MC145481SD?
W681310RG cannot be approved as a drop-in replacement for MC145481SD from the available information alone. Although it is listed in a comparison result, package dimensions, pin functions, clock format, companding behavior, voltage levels, and electrical timing require direct comparison with the NXP datasheet. Treat it as a redesign candidate until verified.
Is MC145481SD suitable for industrial voice equipment?
MC145481SD is suitable for industrial voice equipment when the application requires a 3 V, single-channel PCM codec-filter with mu-law or A-law companding. The device is identified as industrial grade and supports several PCM timing formats. Validate the analog signal levels, system clocking, and environmental requirements during design review.

के लिए इंजीनियरिंग संदर्भ डेटा MC145481SD — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MC145481SD when maintaining or reproducing a legacy 3 V PCM voice system that specifically requires one ADC channel, one DAC channel, 6-bit conversion, and pin-selectable mu-law or A-law companding. It is particularly useful when the host uses Short Frame Sync, Long Frame Sync, IDL, or GCI timing. Do not select it for high-resolution music, broadband conferencing audio, or designs that require modern microphone preamplifiers, integrated headphone drivers, or multichannel audio. No confirmed same-package drop-in alternative is available from the cross-reference results. W681310RG and MC145028P may be useful for redesign studies, but they cannot be treated as drop-in replacements without proving package, pin function, timing, voltage, and companding compatibility against the MC145481SD datasheet. For an obsolete production release, validate long-term supply, traceability, and equivalent behavior before committing the design.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Package 20-SSOP
Brand NXP Semiconductors
Product Type PCM codec-filter
Supply Voltage 3 V
Conversion Resolution 6 bit
Number of ADCs 1
Number of DACs 1
Companding Pin-selectable mu-law or A-law
Clock Formats Short Frame Sync, Long Frame Sync, IDL, and GCI

मुख्य विशेषताएँ

  • Purpose-built PCM voice conversion (बनामGeneral-purpose audio codecs)
  • Multiple legacy PCM timing formats (बनामSingle-format PCM codec designs)
  • Compact legacy-system integration (बनामLarger through-hole telecom codecs)

डिज़ाइन नोट्स

Route the MC145481SD analog and PCM signals according to the manufacturer application guidance. Keep the analog input and output traces short, maintain a continuous ground reference beneath the analog section, and place interface-protection components away from sensitive nodes. The 20-SSOP footprint requires careful escape routing because clock, frame-sync, companding-control, analog, and supply functions share a small lead pitch.

Confirm the system clock relationship before enabling the PCM path. The device supports several frame formats, and selecting an incorrect frame-sync mode can produce bit-alignment or framing errors that resemble a failed codec. Check frame polarity, sync width, data timing, companding mode, and channel-slot allocation against the NXP timing diagrams and the host processor configuration.

Keep the 3 V supply path short and decouple the codec-filter close to its supply pins with the capacitance and placement recommended in the manufacturer datasheet. Keep switching-node and digital return currents away from the analog reference and voice-signal paths. Adequate local decoupling helps prevent supply disturbance from appearing as noise, timing errors, or reduced audio performance.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The product information identifies an industrial-grade CMOS device but does not establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. AEC-Q100 is not applicable to the stated industrial product position.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC145481SD datasheet MC145481SD pinout MC145481SD datasheet pdf MC145481SD equivalent MC145481SD replacement MC145481SD cross reference MC145481SD 20-SSOP pinout MC145481SD PCM codec filter MC145481SD mu-law A-law MC145481SD telephone interface MC145481SD price MC145481SD stock

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors MC145481SD MC145481 PCM codec-filter codec audio codec interface IC semiconductor 3 V CMOS codec 6-bit ADC 6-bit DAC mu-law companding A-law companding serial PCM Short Frame Sync Long Frame Sync IDL timing GCI timing 20-SSOP SSOP package surface mount digital telephony voice gateway line-card interface
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें