MC145481SD - PCM Codec-Filter, 6-bit, 20-SSOP | NXP
MPN: MC145481SD ✗ Son Kullanım ZamanıMC145481SD Genel Bakış
A PCM codec-filter is a semiconductor that converts between analog voice signals and serialized PCM data while applying digital companding. The MC145481SD belongs to the codec and filter category within interface ICs, and it can support telecom, telephony, and embedded voice-processing systems. Its serial interface reduces the number of connections required between an analog voice path and a digital processor.
The MC145481SD provides a 1-channel analog-to-digital converter and 1-channel digital-to-analog converter, with a stated 6-bit conversion resolution. Pin-selectable mu-law or A-law companding allows the system to choose the compression characteristic required by the connected equipment. The device also supports multiple clock formats, including short frame sync, long frame sync, IDL, and GCI timing environments.
The device operates from a 3 V supply and is offered in a 20-pin SSOP package with gull-wing leads. Its industrial temperature grade and CMOS implementation make it suitable for compact communication equipment where a simple, low-power voice codec is preferred over a higher-resolution multimedia audio device. The MC145481SD is also compatible with a family of NXP telecommunication interface products, including U-Interface transceivers, S/T-Interface transceivers, ADPCM transceivers, and other PCM-related devices.
Typical uses include digital telephone handsets, voice gateways, line-card signal paths, industrial voice terminals, and legacy PCM switching equipment. Because the MC145481SD is a dedicated voice codec-filter, it should be selected when the system requires mu-law or A-law companding and a compact PCM interface. It is not intended to replace a modern stereo audio codec in applications requiring higher-resolution playback, wider bandwidth, or integrated digital audio amplifiers.
For a new design, verify the clock timing, companding selection, analog levels, and pin assignments against the manufacturer datasheet before layout. In a replacement design, check that the board uses the 20-SSOP footprint and that the required timing and interface functions are unchanged. This page combines the documented MC145481SD characteristics with practical guidance for sourcing, comparison, and design integration.
Drop-in alternatifler için MC145481SD — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinMC145481SD Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | PCM codec-filter |
| Number of ADCs | 1 |
| Number of DACs | 1 |
| Conversion Resolution | 6 bit |
| Besleme Gerilimi | 3 V |
| Companding | Pin-selectable mu-law or A-law |
| Arayüz Türü | Serial PCM |
| Clock Formats | Short Frame Sync, Long Frame Sync, IDL, and GCI |
| Paket | 20-SSOP |
| Terminal Count | 20 |
| Lead Form | Gull wing |
| Temperature Grade | Industrial |
| Process Technology | CMOS |
| Montaj Türü | Surface mount |
MC145481SD 20-ssop Pin Yapısı Kılavuzu
MC145481SD (20-ssop paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MC145481SD.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MC145481SD için uygundur 6 uygulamas: Digital Telephony Voice Interface, Voice Gateway and Line-Card Interface, Industrial Voice Terminal, Legacy PCM Switching Equipment, Embedded Voice Processor Front End, Two-Way Voice Communication Terminal.
Digital Telephony Voice Interface
The MC145481SD fits digital telephone and private-branch voice interfaces because it combines one analog-to-digital conversion channel, one digital-to-analog conversion channel, and serial PCM signaling in a 20-SSOP package. Its 3 V operation aligns with compact telephone endpoint logic, while mu-law or A-law selection supports the signaling convention used by the connected network. The device accepts Short Frame Sync, Long Frame Sync, IDL, and GCI timing environments, allowing a common codec-filter to serve several legacy PCM architectures. Designers should verify the required companding mode, analog input and output levels, and exact clock timing before releasing the PCB layout.
Önerilen
Voice Gateway and Line-Card Interface
The MC145481SD is suitable for a voice gateway or line-card signal path that must translate a narrowband analog voice channel into a serialized PCM stream. Its single-channel 6-bit ADC and DAC match legacy telecom voice channels, while the selectable companding characteristic provides compatibility with mu-law and A-law systems. The 20-SSOP package limits board area compared with larger through-hole codecs and supports compact peripheral boards. Integration requires attention to analog grounding, frame synchronization, and clock jitter so that the codec-filter remains synchronized to the line-card processor and switching backplane.
Önerilen
Industrial Voice Terminal
The MC145481SD can support industrial voice terminals that require a compact PCM voice path instead of a multimedia audio codec. Its 3 V CMOS implementation, single analog channel, and selectable companding are appropriate for equipment with dedicated speech processing. The serial PCM interface reduces wiring between the codec-filter and the application processor compared with parallel converters, helping preserve board area in compact industrial enclosures. Because the conversion resolution is 6 bit and the device is optimized for companded voice, verify intelligibility, signal-to-noise requirements, and environmental operating conditions before selecting it for high-fidelity monitoring or entertainment audio.
Önerilen
Legacy PCM Switching Equipment
The MC145481SD is applicable to maintenance and expansion of legacy PCM switching equipment that uses compatible short-frame or long-frame telecom timing. Supporting Short Frame Sync, Long Frame Sync, IDL, and GCI formats gives the codec-filter flexibility across several older transport arrangements. The device can provide the compact analog-to-digital and digital-to-analog conversion stage expected by those systems. Engineers should compare the original equipment's frame structure, companding convention, analog level plan, and clock source with the manufacturer timing diagrams. This is especially important in telecom systems where a timing mismatch can produce intermittent framing errors rather than a simple loss of function.
Önerilen
Embedded Voice Processor Front End
The MC145481SD can serve as the analog voice front end of an embedded processor system that consumes or produces serialized PCM data. Its 6-bit conversion resolution is appropriate for narrowband speech interfaces, and pin-selected companding allows software and hardware teams to align the codec-filter with the selected telecom coding convention. The 20-SSOP package is practical for compact embedded boards, but careful layout is needed to isolate analog and digital return currents. Keep the codec supply path short, provide stable analog reference conditions, and route frame-sync and clock signals according to the manufacturer timing guidance to minimize data errors.
Önerilen
Two-Way Voice Communication Terminal
The MC145481SD supports two-way narrowband voice communication through its matched single-channel ADC and DAC paths. The same device handles PCM encoding in the transmit direction and PCM decoding in the receive direction, simplifying the component count in a compact terminal. Selectable mu-law or A-law operation supports common regional telecom conventions, while the 20-SSOP footprint enables replacement designs to reuse a small circuit footprint. The integration trade-off is limited audio bandwidth and 6-bit resolution, so the MC145481SD should be used for speech communication rather than music, broadband audio, or applications requiring high-fidelity storage.
Önerilen
Mühendislik referans verileri: MC145481SD — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 20-SSOP |
| Brand | NXP Semiconductors |
| Product Type | PCM codec-filter |
| Supply Voltage | 3 V |
| Conversion Resolution | 6 bit |
| Number of ADCs | 1 |
| Number of DACs | 1 |
| Companding | Pin-selectable mu-law or A-law |
| Clock Formats | Short Frame Sync, Long Frame Sync, IDL, and GCI |
Ana Farklılayıcılar
- Purpose-built PCM voice conversion (karşılaştırma:General-purpose audio codecs)
- Multiple legacy PCM timing formats (karşılaştırma:Single-format PCM codec designs)
- Compact legacy-system integration (karşılaştırma:Larger through-hole telecom codecs)
Tasarım Notları
Route the MC145481SD analog and PCM signals according to the manufacturer application guidance. Keep the analog input and output traces short, maintain a continuous ground reference beneath the analog section, and place interface-protection components away from sensitive nodes. The 20-SSOP footprint requires careful escape routing because clock, frame-sync, companding-control, analog, and supply functions share a small lead pitch.
Confirm the system clock relationship before enabling the PCM path. The device supports several frame formats, and selecting an incorrect frame-sync mode can produce bit-alignment or framing errors that resemble a failed codec. Check frame polarity, sync width, data timing, companding mode, and channel-slot allocation against the NXP timing diagrams and the host processor configuration.
Keep the 3 V supply path short and decouple the codec-filter close to its supply pins with the capacitance and placement recommended in the manufacturer datasheet. Keep switching-node and digital return currents away from the analog reference and voice-signal paths. Adequate local decoupling helps prevent supply disturbance from appearing as noise, timing errors, or reduced audio performance.
Uyumluluk Bilgisi
The product information identifies an industrial-grade CMOS device but does not establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. AEC-Q100 is not applicable to the stated industrial product position.