NXP Semiconductors

MC33661PEF LIN Transceiver with Wake | NXP | 8-SOIC

MPN: MC33661PEF ✓ सक्रिय
8-SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

MC33661PEF अवलोकन

The NXP Semiconductors MC33661PEF is a half-duplex LIN bus transceiver with wake-up capability, packaged in an 8-pin SOIC. It combines a LIN-compatible physical-layer interface with low-power wake functionality for automotive and industrial communication networks. The 8-SOIC package provides a compact surface-mount solution for distributed vehicle nodes, body-control modules, climate controls, lighting systems, and other LIN-connected electronic controls.

A LIN transceiver is an interface IC that connects a host microcontroller or programmable logic controller to a Local Interconnect Network bus. LIN is a low-cost, single-wire, automotive-oriented communication network used for distributed electronic control units. The MC33661PEF provides the physical communication layer at the node, while the connected controller handles message framing, data interpretation, diagnostics, and application logic. In the product hierarchy, it is an interface transceiver, a communication IC, and a semiconductor device for embedded vehicle networks.

The MC33661PEF distinguishes itself through its wake-up function and enhanced LIN-interface positioning. Wake support allows a connected node to detect a targeted bus activity rather than remain completely inactive, helping conserve power in parked vehicles. Because LIN buses commonly contain several nodes and loads different wake patterns, controller-side wake recognition remains important. The half-duplex architecture supports bidirectional communication over the single LIN conductor while sharing one physical network among multiple modules.

The MC33661PEF is manufactured in the 8-SOIC package identified as 0.154 inch wide and 3.90 mm long by the manufacturer catalog information. Its interface-oriented design is intended to be placed near the vehicle harness connector or protected LIN network entry point. Component placement, grounding, transceiver bypass capacitors, and protection-network design directly affect signal integrity and must follow the pin-description and application guidance in the NXP manufacturer datasheet.

Typical uses include LIN-controlled door modules, seat and window controls, climate-control panels, steering-wheel controls, ambient lighting, motor actuators, sensors, and body-control gateways. In these systems, the MC33661PEF handles the physical bus interface and wake detection while a low-power microcontroller or other embedded controller handles protocol functions. The 8-SOIC footprint simplifies board-level integration where a conventional through-hole or larger connector-oriented interface would be unnecessary.

For a robust design, compare the transceiver's specified operating limits, bus timing, output-driver behavior, sleep and wake thresholds, and transceiver version against the vehicle network requirements before release. LIN nodes commonly combine the transceiver with reverse-polarity, transient-voltage, and ESD protection. Those external components should be selected for the harness environment rather than inferred solely from the IC's nominal bus specification.

This product overview organizes the MC33661PEF's package, interface role, wake capability, application fit, sourcing path, and verified replacement considerations into an engineer-oriented reference. It complements the NXP manufacturer datasheet with practical design guidance, explicit compatibility limits, and direct purchasing instructions for current quotation and lead-time requirements.

के लिए ड्रॉप-इन विकल्प MC33661PEF — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

MC33661PEF विशेषताएं

Product Type LIN bus transceiver with wake-up
Bus Category LINbus
Transceiver Configuration 1/1 half-duplex
Wake Capability Yes
पैकेज 8-SOIC
Package Width 0.154 inch
Package Length 3.90 mm
माउंटिंग प्रकार Surface mount
पिन की संख्या 8

MC33661PEF 3.90 mm पिन कॉन्फ़िगरेशन गाइड

MC33661PEF (3.90 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MC33661PEF के लिए 3.90 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC33661PEF.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MC33661PEF के लिए उपयुक्त है 6 अनुप्रयोगs: Vehicle Body-Control Modules, Door and Window Control Modules, Climate-Control User Interfaces, Ambient and Exterior Lighting, Seat and Steering-Wheel Controls, Low-Power Sensor Nodes.

🚗

Vehicle Body-Control Modules

The MC33661PEF fits distributed body-control modules that communicate over a LIN network and must reduce standby activity. Its half-duplex LIN transceiver provides the physical connection to the single-wire bus, while wake support allows the attached controller to recognize relevant bus activity. In an 8-SOIC package, it supports compact controller boards without requiring a separate physical-layer device. Final design approval should verify supply range, bus thresholds, wake timing, temperature behavior, and automotive qualification against the NXP manufacturer datasheet.

🚗

Door and Window Control Modules

Door-lock, window, and mirror modules commonly use LIN for local actuator communication. The MC33661PEF can provide the bus interface between a low-power controller and the vehicle LIN wiring, with wake functionality supporting activity detection when the vehicle is parked. The 8-SOIC footprint is convenient for mixed-technology control boards. Protection from harness transients, reverse polarity, and ESD must be placed near the connector, while the controller determines which bus messages qualify as wake events.

🏭

Climate-Control User Interfaces

Climate-control panels and HVAC actuators can use the MC33661PEF to connect an embedded controller to a LIN subnetwork. The half-duplex physical interface supports communication with other nodes while keeping the wiring count low, and wake support can reduce the need for continuous operation. The 8-SOIC package leaves board area for sensing, display control, and power management. Engineers should validate logic levels, wake thresholds, timing, and quiescent behavior against the exact manufacturer specification.

💡

Ambient and Exterior Lighting

Ambient-lighting and exterior-lighting controllers often use LIN to distribute commands and status among multiple lamp nodes. The MC33661PEF supplies the physical-layer interface and wake capability for a controller that needs to detect activity on the network. This helps avoid keeping the complete lighting subsystem active when no relevant command is present. The implementation should account for bus loading, protection requirements, node addressing, and the wake strategy defined by the vehicle system.

🚗

Seat and Steering-Wheel Controls

Seat-adjustment and steering-wheel control assemblies can use LIN to link switches and motors to a local controller. The MC33661PEF is appropriate where the assembly requires a compact half-duplex transceiver with wake support. Its 8-SOIC package is practical for dense control boards, while wake detection can support low-power behavior during inactivity. The embedded controller should filter recognized frames and the electronics should use harness-rated protection close to the external connector.

🧩

Low-Power Sensor Nodes

A LIN-connected sensor node can use the MC33661PEF to combine bus communication with activity-aware power management. The wake function supports controller strategies that remain asleep until the network presents a relevant condition, while the half-duplex transceiver handles bidirectional bus communication. The compact 8-SOIC package suits space-constrained sensor electronics. Designers should confirm bus voltage tolerance, wake sensitivity, sleep current, and environmental limits in the manufacturer datasheet.

What is the MC33661PEF?
The MC33661PEF is an NXP Semiconductors half-duplex LIN bus transceiver with wake-up functionality in an 8-SOIC package. According to the NXP manufacturer datasheet, it provides the physical-layer interface between an embedded controller and a LIN network. It is suited to distributed vehicle systems and other low-cost single-wire communication networks where low-power wake detection and compact surface-mount packaging are important.
What package does the MC33661PEF use?
The MC33661PEF uses an 8-SOIC surface-mount package measuring 0.154 inch wide and 3.90 mm long. This package information appears in the NXP manufacturer catalog description and the linked manufacturer datasheet. Because SOIC packages provide larger leads than fine-pitch packages, the device is also practical for prototypes and mixed-assembly automotive electronics where lead geometry and inspection access are important.
What is the best use for the MC33661PEF wake-up function?
The MC33661PEF wake-up function is best used to let a connected node detect LIN bus activity and avoid unnecessary continuous operation. According to the NXP manufacturer datasheet, wake support is part of the device's enhanced LIN-interface feature set. The embedded controller must still implement the required wake detection and filtering, while the transceiver supplies the physical interface needed for a low-power node.
Where can I download the MC33661PEF datasheet PDF?
The MC33661PEF datasheet can be accessed through the NXP manufacturer document listing linked on this product page. It is also reachable through the datasheet catalog result for the exact MC33661PEF orderable MPN. The document should be used for the definitive pin descriptions, electrical limits, LIN timing values, wake thresholds, application circuit, and recommended external protection components.
Where can I find the MC33661PEF pinout?
The MC33661PEF pinout is presented in the NXP manufacturer datasheet for the 8-SOIC package. Use its pin-description table when assigning supply, ground, LIN, control, and wake-related connections; the exact functions and no-connect positions must not be guessed from the general 8-SOIC footprint. The package diagram on this page identifies the physical outline, while the manufacturer datasheet remains the controlling document for signal assignment.
Where can I buy MC33661PEF online?
MC33661PEF can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial terms because availability, production allocation, and lead time can change after an initial quotation. The part is identified as an NXP 8-SOIC LIN transceiver with wake support, allowing the request to be tied to the exact MC33661PEF orderable MPN.
What is the price of MC33661PEF?
Current commercial pricing for MC33661PEF should be obtained through the Request a Quote form on this page. The form preserves the exact manufacturer part number, package designation, and requested quantity for an updated quotation. This avoids presenting a stale listing value as a firm offer and lets the quotation reflect current supply, quantity breaks, and any manufacturer allocation constraints.
What is the lead time for MC33661PEF?
The current MC33661PEF lead time should be confirmed through the Request a Quote form on this page. Lead time depends on the requested quantity, current manufacturer inventory, and production allocation, so a fixed delivery interval should not be assumed for every order. Submit the exact MPN and required quantity to obtain a current schedule for the 8-SOIC device.
Is MC33661PEF in stock?
MC33661PEF availability should be checked at the time of each quotation by using the Request a Quote form on this page. Distributor inventory can change rapidly and may be allocated across multiple customers. The Request a Quote workflow allows procurement to confirm the exact MC33661PEF package and obtain current stock, lead-time, and delivery information.
What can replace the MC33661PEF?
A valid replacement for the MC33661PEF must be pin-compatible in the 8-SOIC footprint and meet the required LIN timing, supply-voltage, wake, and sleep specifications. Several NXP MC3366-series devices are related LIN-interface products, but a different feature set can alter wake behavior or external connections. Verify the manufacturer pin descriptions and application circuit before treating any related family member as a drop-in replacement.
What is the best cross-brand equivalent for MC33661PEF?
No cross-brand drop-in equivalent can be confirmed from the manufacturer and distributor information associated with the MC33661PEF. A defensible cross-brand replacement requires identical SOIC-8 pin assignment plus compatible LIN thresholds, timing, wake behavior, and supply limits. Until those requirements are verified in a manufacturer document, treat a cross-brand suggestion as a design-review candidate rather than a confirmed drop-in substitution.
MC33661PEF versus related MC3366 transceivers: which should I choose?
Choose the MC33661PEF when the design specifically requires an 8-SOIC LIN transceiver with wake-up support. Related MC3366-family devices can differ in wake thresholds, sleep behavior, transceiver revision, internal functions, and pin utilization even when they share the broad SOIC-8 package family. Compare the manufacturer pin-description and feature tables for the exact candidates rather than relying on the package name alone.
When should I choose the MC33661PEF over another LIN transceiver?
Choose the MC33661PEF when the node requires a half-duplex LIN physical interface, wake detection, and an 8-SOIC footprint. Its selection is most defensible in distributed vehicle-control electronics where a controller monitors bus activity and enters a low-power state between communications. For a design requiring a different wake architecture, diagnostic interface, or bus voltage range, select a transceiver whose manufacturer data matches those exact requirements.
Is the MC33661PEF suitable for automotive body-control modules?
The MC33661PEF is suitable for LIN-based automotive body-control functions when the complete system meets the relevant vehicle, EMC, ESD, temperature, and qualification requirements. Its 8-SOIC LIN interface with wake support fits distributed switches and controls. Automotive suitability of the assembled product must still be assessed against the applicable manufacturer specification and customer qualification process.
What are the key specifications of MC33661PEF that engineers should know?
The key MC33661PEF specifications are its LINbus function, half-duplex 1/1 transceiver configuration, wake-up capability, and 8-SOIC package measuring 0.154 inch by 3.90 mm. According to the NXP manufacturer datasheet, these features define its physical-network and low-power role. Supply limits, bus thresholds, timing, sleep current, and temperature limits must be taken from the exact device datasheet during design verification.
How should the MC33661PEF be protected in a LIN harness?
Protect the MC33661PEF LIN connection with a network suitable for reverse polarity, load dump, transient voltage, and ESD events in the target harness. The transceiver IC handles the normal physical-layer interface, while external components absorb stresses outside the device operating limits. Select those parts and place the protection network close to the connector according to the application information in the NXP manufacturer datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा MC33661PEF — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Select the MC33661PEF when the design requires an 8-SOIC half-duplex LIN transceiver with wake-up capability for a low-power distributed node. It is a strong fit for vehicle body modules, climate controls, lighting nodes, seat controls, and sensor assemblies where a controller must monitor LIN activity while conserving power. The key decision is not merely the eight-pin package: verify the exact device revision, pin functions, supply limits, LIN thresholds, wake behavior, and timing against the NXP manufacturer datasheet. Related MC3366-family devices may share the general transceiver category while differing in wake architecture, internal functions, or electrical behavior. Likewise, a cross-brand SOIC-8 LIN transceiver should be treated as a drop-in candidate only after its manufacturer confirms pin equivalence and operating parameters. Use the Request a Quote form for current commercial terms and lead time after the technical part has been selected.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Product Type LIN bus transceiver with wake-up
Bus Category LINbus
Transceiver Configuration 1/1 half-duplex
Package 8-SOIC
Brand NXP Semiconductors
Number of Pins 8
Package Width 0.154 inch
Package Length 3.90 mm
Wake Capability Yes
Mounting Type Surface mount

डिज़ाइन नोट्स

Do not assign the eight MC33661PEF connections from the package outline alone. Use the pin-description table in the NXP manufacturer datasheet to distinguish supply, ground, LIN, control, wake, and any unused positions. The 8-SOIC footprint establishes mechanical compatibility, but it does not establish electrical or functional compatibility with every related MC3366-family transceiver.

Place the MC33661PEF and its required bypass components close to the associated supply and ground pins, and route the LIN connection toward the protection network without long unprotected stubs. Keep the high-current and transient-prone portions of the harness interface away from sensitive controller traces. Ground-return paths should follow the application guidance in the manufacturer datasheet to minimize susceptibility to EMC events.

Design the node around the MC33661PEF sleep and wake behavior rather than treating wake support as an automatic system power controller. The attached microcontroller must recognize an accepted wake pattern, initialize the LIN interface, and manage the remaining system rails. Verify wake thresholds, timing, and supply behavior against the exact device specification before fixing the production wake strategy.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The MC33661PEF is an automotive-network interface device, but qualification and material-compliance claims require confirmation in the exact NXP manufacturer documentation or product declaration.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC33661PEF datasheet MC33661PEF datasheet pdf MC33661PEF pinout MC33661PEF equivalent MC33661PEF replacement MC33661PEF cross reference MC33661PEF application circuit MC33661PEF 8-SOIC NXP MC33661PEF MC33661PEF LIN transceiver MC33661PEF price MC33661PEF stock MC33661PEF wake up MC33661PEF automotive LIN

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors MC33661PEF MC33661 LINbus LIN transceiver half-duplex transceiver wake-up function 8-SOIC SOIC package family surface-mount device automotive electronics body-control module embedded controller physical-layer interface single-wire network wake threshold sleep current LIN bus timing reverse-polarity protection ESD protection harness transient protection interface IC semiconductor
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें