NXP Semiconductors

MC33901SEF - Single High-Speed CAN Transceiver | NXP

MPN: MC33901SEF ✓ सक्रिय
8-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

MC33901SEF अवलोकन

The NXP Semiconductors MC33901SEF is a single-channel high-speed CAN physical-layer transceiver packaged in an 8-pin SOIC. It provides one CAN transmit and receive channel, operates from a single low-voltage supply, and connects a host controller to a high-speed CAN bus. The device is identified by NXP as a single CAN HS transceiver without wakeup or timeout functions, making it suitable for conventional CAN systems that do not require those optional bus-management features.

A CAN transceiver is the physical-layer interface between a digital controller and a differential CAN network. It converts controller-side logic signals into the dominant and recessive levels used on the bus, while converting received bus states into logic signals for the controller. Within the hierarchy of electronic components, the MC33901SEF is a bus interface IC, a CAN physical-layer transceiver, a communication interface device, and ultimately a semiconductor.

The MC33901SEF is identified as a 1/1 transceiver, meaning that it provides one CAN channel rather than the two or four channels found in some multi-channel transceivers. Its 8-SOIC package supports compact surface-mount layouts in automotive and industrial control equipment. The automotive temperature-grade marking identifies it for vehicle communication applications where environmental robustness and long service life are important design considerations.

The part's principal engineering benefit is straightforward CAN physical connectivity without wakeup or timeout circuitry. This simplifies system partitioning when the host CAN controller already manages low-power behavior, bus monitoring, and diagnostics. Its single-channel architecture also reduces board area and component count compared with a multi-channel transceiver when only one CAN network is required. Designers should verify signaling, supply, protection, and timing requirements against the manufacturer datasheet for the exact operating environment.

Typical uses include vehicle body controllers, engine and transmission electronics, industrial automation equipment, sensor gateways, and embedded control modules. A CAN network is especially useful where multiple nodes need robust, deterministic communication over a multi-conductor differential bus. The MC33901SEF can sit between a microcontroller or dedicated CAN controller and the physical CANH and CANL conductors, with the bus network providing the shared communication medium.

For layout, place the transceiver close to the CAN connector or bus-header pins and keep the CANH and CANL routing short, symmetric, and continuous over a common ground reference. Follow the manufacturer's recommended input and output capacitor placement, provide the specified supply bypass capacitance, and keep switching or high-current return paths away from the bus traces. The 8-SOIC footprint also makes thermal performance dependent on copper area and the surrounding board construction.

This page combines the NXP product identity with practical CAN interface guidance, package details, verified sourcing links, and a conservative review of replacement options. It emphasizes confirmed 8-SOIC compatibility rather than treating every functionally similar CAN receiver as a true drop-in replacement.

के लिए ड्रॉप-इन विकल्प MC33901SEF — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC33901SEF (समान फॉर्म फैक्टर और फुटप्रिंट).

Microchip Technology

MC33901SED

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SOIC-8
Same 1/1 CAN channel configuration and 8-pin SOIC interface; device ordering and temperature-grade details differ by 0 pins and 0 CAN channels

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MCP2562FD-E/SN

✅ ड्रॉप-इन
Microchip Technology
📦 SOIC-8
CAN, CAN FD · Transceiver (1/1) · 1/1 · 8 Mbps · 1 Mbps · <= 130 ns · 1.8 V to 5.5 V · 4.5 V to 5.5 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC33901SEF विशेषताएं

Device Type Single CAN high-speed physical-layer transceiver
CAN Channel Count 1 channel
Transmit/Receive Configuration 1/1 transceiver
CAN Network Type High-speed CAN
Wakeup Function Not included
Timeout Function Not included
Package Type 8-pin SOIC
Terminal Count 8 terminals
Package Shape Rectangular
Terminal Form Gull wing
Temperature Grade Automotive
माउंटिंग प्रकार Surface mount

MC33901SEF rectangular पिन कॉन्फ़िगरेशन गाइड

MC33901SEF (rectangular पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MC33901SEF के लिए rectangular पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC33901SEF.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MC33901SEF के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Body Control Module, Industrial Automation Controller, Engine and Transmission Electronics, Sensor Network Gateway, Embedded Equipment Communication, Diagnostic and Test System.

🚗

Automotive Body Control Module

The MC33901SEF fits an automotive body-control module that connects a microcontroller or CAN controller to a high-speed CAN network. Its confirmed 1/1 transceiver configuration supplies one CAN physical channel, while the 8-pin SOIC package minimizes board space compared with many discrete bus-interface implementations. The automotive temperature-grade identification supports use in vehicle electronics, but the exact ordering code must satisfy the module's environmental requirements. Since wakeup and timeout are absent, low-power and bus-monitoring behavior should be implemented by the host controller or another suitable subsystem.

🏭

Industrial Automation Controller

The MC33901SEF can serve as the physical interface between an industrial controller and a high-speed CAN fieldbus. Its single 1/1 CAN channel is appropriate for machines or sensor nodes requiring one network segment, and the 8-pin SOIC package supports conventional surface-mount assembly. The absence of wakeup and timeout functions keeps the physical-layer role focused on communication. Engineers should use the manufacturer layout guidance for bus routing, termination, supply bypassing, and protection because those implementation details determine EMC and fault-tolerance performance more than the package count alone.

🚗

Engine and Transmission Electronics

The MC33901SEF is suitable for an engine or transmission electronic control unit that exchanges diagnostic and control data over a high-speed CAN network. One dedicated physical-layer channel is sufficient when the ECU has a single CAN network, and the automotive-grade identity aligns with vehicle electronics requirements. The compact 8-pin SOIC package leaves more board area for sensing, computation, and output drivers. Because the device does not provide wakeup or timeout, the ECU must handle sleep transitions and bus inactivity monitoring at the system or controller level.

🧩

Sensor Network Gateway

The MC33901SEF can provide the single CAN physical-layer link used by a gateway that aggregates data from remote sensors. The 1/1 architecture is appropriate when one upstream CAN segment connects the gateway to a higher-level controller, while the SOIC-8 footprint supports compact gateway hardware. Bus routing should preserve the characteristic CANH and CANL pair geometry and minimize exposure to unrelated switching currents. For installations requiring automatic low-power wakeup or inactivity timeout, select a transceiver with those functions rather than adding software assumptions that MC33901SEF does not implement.

🔧

Embedded Equipment Communication

The MC33901SEF is appropriate for embedded industrial equipment that exposes a high-speed CAN interface to an operator panel, robot controller, or service computer. A single transceiver channel keeps the bus interface economical and compact in an 8-pin SOIC footprint. The controller-side logic interface and physical CANH/CANL functions are isolated from the bus by the transceiver, reducing the need for discrete bus-driver circuitry. Designers should still include the required bus termination, common-mode protection, and supply decoupling according to the manufacturer's application guidance.

🖥️

Diagnostic and Test System

The MC33901SEF can serve as the CAN interface in a portable diagnostic tool, hardware-in-the-loop tester, or service equipment connected to a high-speed CAN network. Its 1/1 transceiver configuration provides the required physical layer for one CAN segment, and the SOIC-8 package is easy to assemble using standard surface-mount methods. The absence of wakeup and timeout should be considered when designing a tester that must detect an inactive bus. Cable protection, ground continuity, and termination must be handled at the connector and interface-protection circuit.

What is the MC33901SEF?
The MC33901SEF is a single-channel, high-speed CAN physical-layer transceiver from NXP Semiconductors. According to the NXP product page, it provides one CAN transmit and receive channel in an 8-pin SOIC and does not include wakeup or timeout functions. It is intended for connecting a CAN controller to a differential high-speed CAN network.
What package does MC33901SEF use?
The MC33901SEF uses an 8-pin SOIC package with a rectangular body and gull-wing terminals. The NXP product page identifies the package as SOIC 8, while distributor technical listings independently identify the device as an 8-SOIC CANbus transceiver. The package drawing and complete terminal assignment should be taken from the manufacturer datasheet.
Does MC33901SEF support CAN FD?
The NXP product page identifies MC33901SEF as a single high-speed CAN transceiver without wakeup or timeout; it does not identify the device as a CAN FD transceiver. CAN FD operation requires a controller and physical-layer transceiver specifically designed for the higher signaling rates and fault-tolerance requirements of CAN FD, so compatibility should not be assumed from the CAN label alone.
What is the difference between MC33901SEF and MC33901SED?
MC33901SEF and MC33901SED are members of the same NXP MC33901 single-channel CAN transceiver family and use the same 8-pin SOIC interface. The verified automotive temperature-grade description applies to MC33901SEF, while the specific temperature limits and ordering codes for MC33901SED must be checked in the datasheet. Their CAN channel count and pin count are both 1 channel and 8 pins.
What can replace MC33901SEF?
A true replacement must match the 8-pin SOIC footprint, provide one CAN transmit and receive channel, and satisfy the electrical requirements of the existing CAN network. MCP2562FD-E/SN is a documented CAN physical-layer alternative in an 8-pin SOIC, but its CAN FD and fault-tolerant behavior differs from the conventional high-speed CAN function of MC33901SEF. Verify pinout, supply voltage, bus timing, and transceiver mode before substitution.
Is MC33901SEF the same as MCP2562FD-E/SN?
No, MC33901SEF and MCP2562FD-E/SN are not functionally identical even though both are CAN transceivers in 8-pin SOIC packages. MCP2562FD-E/SN is documented as a CAN FD-capable, fault-tolerant high-speed transceiver, while MC33901SEF is identified as a single high-speed CAN transceiver without wakeup or timeout. The footprint similarity makes review practical, not an automatic functional equivalence.
When should I choose MC33901SEF over a CAN FD transceiver?
Choose MC33901SEF when the system uses conventional high-speed CAN, needs only one physical CAN channel, and does not require CAN FD data rates, wakeup, or transceiver timeout functions. Its simpler single-channel role can reduce board area and firmware complexity. Select a CAN FD transceiver instead when the network must use CAN FD frames or when its additional fault-tolerance and signaling features are required.
Is MC33901SEF suitable for automotive applications?
MC33901SEF is identified with an automotive temperature grade, making it appropriate for automotive CAN networking when the full operating-temperature and qualification requirements are met by the exact ordering code. NXP product information identifies the device as a single high-speed CAN transceiver in SOIC 8. Final design approval should include review of the manufacturer datasheet, qualification markings, and system-level EMC requirements.
Where can I download the MC33901SEF datasheet PDF?
The MC33901SEF datasheet and product resources are available from the official NXP part page at nxp.com/part/MC33901SEF. From that page, use the datasheet or documentation links for the latest manufacturer PDF. This page also includes the verified NXP and distributor links so engineers can locate the official technical document without relying on third-party copies.
Where can I find the MC33901SEF pinout?
The MC33901SEF pinout is defined in the pin-description section of the NXP manufacturer datasheet for the 8-pin SOIC package. Use that drawing to assign VCC, ground, controller-interface, and CAN bus connections before laying out the PCB. The package has eight terminals, and assigning functions from a generic CAN transceiver diagram could produce an incorrect board.
How should CANH and CANL be routed for MC33901SEF?
Route CANH and CANL as a closely coupled differential pair on the same PCB layer, keeping their geometry consistent and minimizing stubs and unnecessary vias. Follow the manufacturer layout guidance, terminate the bus as required by the network design, and keep the transceiver close to the connector or bus header. High-current or switching traces should not run beneath or parallel to the CAN pair.
Does MC33901SEF include wakeup and timeout features?
No. The NXP product description explicitly identifies MC33901SEF as a single CAN high-speed transceiver without wakeup or timeout functions. If low-power bus wakeup, inactivity detection, or timed standby is required, choose a CAN transceiver that implements those functions or add the corresponding behavior elsewhere in the system.
Where can I buy MC33901SEF and check current lead time?
Use the Request a Quote form on this page to request MC33901SEF availability, current lead time, and an order quote. The component is offered in an 8-pin SOIC package and is listed by NXP and major distributors, but current inventory, minimum order quantity, and delivery timing can change. Submit the required quantity, target date, and shipment destination with the request.
What is the price of MC33901SEF?
Use the Request a Quote form on this page for the current MC33901SEF price and volume quotation. Pricing depends on order quantity, sourcing channel, market conditions, and required delivery terms. The structured offer information on this page is refreshed independently, while a direct quote provides the most appropriate response for the requested quantity and date.
What key specifications should engineers know about MC33901SEF?
The confirmed core specifications are one high-speed CAN channel, a 1/1 transmit-and-receive configuration, an 8-pin SOIC package, an automotive temperature-grade designation, and no wakeup or timeout functions. NXP's product page also identifies a rectangular gull-wing surface-mount package. Supply limits, maximum data rate, timing, protection levels, and exact temperature bounds are governed by the manufacturer datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा MC33901SEF — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MC33901SEF when the design uses a conventional high-speed CAN network, requires exactly one physical CAN channel, and can manage low-power behavior outside the transceiver. Its 8-pin SOIC package is suitable for compact automotive or embedded equipment, and its identified automotive temperature grade supports vehicle applications when all ordering-code requirements are met. Choose MCP2562FD-E/SN when CAN FD data rates, fault-tolerant operation, or its specific low-power features are required; otherwise, the added transceiver functionality may complicate software and validation. Consider MC33901SED for another source of the same NXP family after confirming its exact temperature grade, ordering code, electrical limits, and pin assignment. Do not select any alternative solely because it has eight pins; verify controller-side signaling, supply requirements, bus fault behavior, wakeup, timeout, and termination compatibility before releasing a drop-in revision.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MC33901SED MCP2562FD-E/SN
Package SOIC-8 SOIC-8 SOIC-8
Brand NXP Semiconductors NXP Semiconductors Microchip Technology
Device Type Single high-speed CAN transceiver Single high-speed CAN transceiver CAN FD fault-tolerant high-speed transceiver
CAN Channel Count 1 channel 1 channel 1 channel
Terminal Count 8 terminals 8 terminals 8 terminals

मुख्य विशेषताएँ

  • Focused single-channel CAN physical interface (बनामMCP2562FD-E/SN)
  • No wakeup or timeout circuitry in the identified device (बनामMC33901SED)
  • Automotive-grade identity in a compact 8-pin package (बनामMCP2562FD-E/SN)

डिज़ाइन नोट्स

Route CANH and CANL as a short, symmetric differential pair over a continuous reference plane. Keep the pair away from switching nodes, high-current return paths, crystal-clock circuitry, and unrelated communication buses. Minimize stubs and avoid unnecessary layer changes; when vias are unavoidable, use a matching transition geometry on both conductors. Place the transceiver close to the bus connector or header to reduce the unterminated portion of the network and improve immunity to external electromagnetic interference.

Decouple the transceiver supply with the capacitance and placement specified by the manufacturer, placing the high-frequency bypass component close to the relevant device pins. Keep the supply return path continuous beneath and around the SOIC-8 footprint, and separate noisy converter currents from the CAN transceiver and controller supply paths. Verify that the selected power source, local regulation, and startup sequence meet the device's electrical limits before releasing the system to the bus.

Do not treat the 8-SOIC footprint alone as proof that a different CAN transceiver is interchangeable. Check pin names, supply voltage, controller-side logic levels, dominant-state behavior, bus fault handling, standby or sleep modes, and termination requirements. MCP2562FD-E/SN adds CAN FD and fault-tolerant functionality, while MC33901SEF is identified without wakeup or timeout; those differences can affect firmware and network behavior even when the footprints align.

Termination belongs at the physical ends of the CAN bus, not at every node. Confirm the complete network topology and termination strategy before energizing the bus, and avoid leaving a disconnected transceiver with an incorrectly configured or floating controller interface. For production hardware, include the required common-mode protection, connector grounding, and bus-fault test coverage so that transient energy and ground offsets do not compromise the communication link.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The device is identified as automotive temperature grade, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer or an authoritative product declaration.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC33901SEF datasheet MC33901SEF pinout MC33901SEF datasheet pdf MC33901SEF SOIC-8 MC33901SEF equivalent MC33901SEF replacement MC33901SEF cross reference MC33901SEF vs MCP2562FD-E/SN MC33901SEF price MC33901SEF stock NXP MC33901SEF MC33901SEF automotive CAN transceiver MC33901SEF high speed CAN interface MC33901SEF single channel 1/1 MC33901SEF automotive application circuit

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors MC33901SEF MC33901SED MCP2562FD-E/SN Microchip Technology CAN transceiver CAN physical layer high-speed CAN CAN bus CANH CANL 1/1 transceiver single-channel interface IC SOIC-8 QFN family surface-mount package gull-wing terminal automotive temperature grade wakeup function timeout function CAN FD bus termination differential pair routing embedded control industrial automation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें