MC9S08AC16CBE - 8-Bit 40MHz 16KB Flash MCU | NXP | DIP
MPN: MC9S08AC16CBE ✓ सक्रियMC9S08AC16CBE अवलोकन
An 8-bit microcontroller is a programmable semiconductor containing a processor core, nonvolatile program memory, working memory, and integrated peripherals. In the broader embedded hierarchy, the S08 core belongs to the HCS08 family of 8-bit MCUs, while the MC9S08AC16 device combines that core with Flash memory and mixed-signal peripherals. This product type is positioned between simple logic controllers and higher-performance 32-bit microcontrollers.
Three defining capabilities support its use in embedded products. First, the 40 MHz S08 core provides the operating speed identified for the device. Second, its 16 KB Flash memory supports embedded firmware storage, with the manufacturer listing the organization as 16K x 8 bytes. Third, the integrated peripheral set includes SPI, I2C, SCI, and an 8-channel 10-bit ADC, reducing the need for external interface and conversion components.
The MC9S08AC16CBE belongs to the MC9S08AC16 family, whose documentation describes a low-cost, high-performance HCS08 architecture with an 8-bit CPU. Its through-hole 42-pin DIP construction supports prototyping, education, repair, and industrial control assemblies where a socketed or leaded component is preferred over a fine-pitch surface-mount package. The family documentation also describes pin-compatible 8-bit and 32-bit device pairs for migration paths.
Typical applications include motor and actuator controllers, compact industrial sensing modules, keypad-controlled equipment, serial data concentrators, and educational embedded-control platforms. The SPI, I2C, and SCI interfaces allow the MCU to connect sensors, transceivers, displays, or host processors, while the 10-bit ADC supports cost-sensitive analog measurements such as potentiometer, divider, and simple sensor inputs.
Designers should verify the exact 42-pin pinout, oscillator requirements, programming method, and peripheral multiplexing against the MC9S08AC16 datasheet before laying out a PCB. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be configured to avoid unintended transitions. The DIP package simplifies hand assembly but occupies more board area than a surface-mount alternative.
This product record combines the MC9S08AC16CBE's confirmed architecture, memory, clock, package, voltage, and peripheral characteristics with sourcing guidance, replacement analysis, and practical integration considerations. It also distinguishes verified drop-in alternatives from devices that require different packages or pinouts, helping engineers evaluate redesign risk before making a component substitution.
के लिए ड्रॉप-इन विकल्प MC9S08AC16CBE — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC9S08AC16CBE (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Core, Mounting Type, Package.
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंMC9S08AC16CBE Maximum Ratings और Electrical Characteristics
| Product Type | 8-bit microcontroller (MCU) |
| Core | S08 core |
| Maximum Core Frequency | 40 MHz |
| Flash Program Memory | 16 KB (16K x 8 bytes) |
| ऑपरेटिंग सप्लाई वोल्टेज | 3.3 V to 5 V |
| पैकेज | 42-pin SPDIP |
| Package Type | 42-pin through-hole DIP |
| Total Pin Count | 42 pins |
| ADC Resolution | 10 bits |
| ADC Channels | 8 channels |
| Serial Interface | SCI |
| Synchronous Serial Interface | SPI |
| Inter-Integrated Circuit Interface | I2C |
| Architecture | HCS08 8-bit |
| माउंटिंग प्रकार | Through-hole |
MC9S08AC16CBE 42-pin through-hole dip पिन कॉन्फ़िगरेशन गाइड
MC9S08AC16CBE (42-pin through-hole dip पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S08AC16CBE.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MC9S08AC16CBE के लिए उपयुक्त है 6 अनुप्रयोगs: Compact Industrial Control, Analog Sensor Interface, Serial Data Concentrator, Educational Microcontroller Platform, Motor and Actuator Control, Instrumentation and Signal Conditioning.
Compact Industrial Control
The MC9S08AC16CBE fits compact industrial-control assemblies that require deterministic 8-bit logic, moderate clock speed, and a through-hole package. Its 40 MHz S08 core can service control tasks and communication routines, while 16 KB Flash stores the operating firmware. SPI, I2C, and SCI provide paths to sensors, remote I/O, and supervisory equipment without requiring separate interface ICs. The 42-pin SPDIP construction also simplifies socketed maintenance and prototype rework. For an industrial design, engineers should still verify environmental ratings, isolation boundaries, grounding, and power-supply tolerance for the final enclosure and production test requirements.
अनुशंसित
Analog Sensor Interface
The MC9S08AC16CBE is appropriate for compact sensor modules requiring several low-speed analog measurements and local control. Its integrated 8-channel, 10-bit ADC can monitor divider networks, potentiometers, and basic analog sensors, while the 40 MHz core handles filtering, calibration, and communication tasks. The 3.3 V to 5 V operating range supports common embedded supply arrangements, and SPI or I2C can connect the controller to a more capable sensor or external converter. Because the ADC is intended for general embedded measurement rather than precision instrumentation, the design should include suitable input conditioning, reference strategy, and protection before routing external signals.
अनुशंसित
Serial Data Concentrator
The MC9S08AC16CBE can serve as a small serial data concentrator when a product must aggregate information from several low-speed peripherals. SCI provides a straightforward path to a host, supervisor, or modem, while SPI and I2C support sensors, memory, and bus devices. The 40 MHz S08 core leaves processing headroom for packet formatting, basic filtering, status monitoring, and diagnostics, and 16 KB Flash supports a focused embedded application. Engineers should assign peripheral functions through the device configuration and verify pin multiplexing in the MC9S08AC16 datasheet, particularly if the PCB must support multiple communication modes or alternate peripheral functions.
अनुशंसित
Educational Microcontroller Platform
The MC9S08AC16CBE is well suited to educational embedded-control platforms because it combines an approachable 8-bit architecture with a 40 MHz core, 16 KB Flash, and common serial peripherals. The 42-pin DIP package exposes a generous pin count for laboratory breadboards, solderless prototyping boards, and socket-based training kits. Learners can use the ADC for analog experiments, SCI for terminal communication, and SPI or I2C for expansion modules without designing a fine-pitch footprint. The through-hole construction also makes it easier to replace a damaged MCU. Instruction should identify the exact CBE pinout and include a proper programming header, decoupling, and protected debug access rather than relying on improvised connections.
अनुशंसित
Motor and Actuator Control
The MC9S08AC16CBE can supervise basic motor, valve, relay, or actuator functions where the control loop does not require a high-performance real-time processor. Its 40 MHz 8-bit core can execute state-machine logic, timing routines, and fault monitoring, while the serial interfaces allow commands and diagnostics to be exchanged with a higher-level controller. The 42-pin SPDIP package provides straightforward access to general-purpose I/O in a rugged prototype or serviceable industrial assembly. Motor circuitry should remain separate from the MCU supply and grounds, with appropriate driver transistors, flyback protection, isolation where needed, and hardware shutdown paths for conditions that cannot safely wait for software intervention.
अनुशंसित
Instrumentation and Signal Conditioning
The MC9S08AC16CBE is appropriate for compact instrumentation modules that need local signal conditioning, status handling, and digital communications. Its 8-channel, 10-bit ADC supports multiple general-purpose analog inputs, while the 40 MHz core can perform calibration, scaling, filtering, and threshold logic before sending results through SCI, SPI, or I2C. Operating from 3.3 V to 5 V makes the device adaptable to common embedded rails, and the DIP package supports serviceable prototypes. Instrumentation designs should use buffered sensor inputs, suitable reference and ground arrangements, protection against external transients, and calibration storage appropriate for the required measurement accuracy.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MC9S08AC16CBE — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Package | 42-pin SPDIP |
| Brand | NXP Semiconductors |
| Core Architecture | 8-bit S08 |
| Maximum Core Frequency | 40 MHz |
| Flash Program Memory | 16 KB (16K x 8 bytes) |
| Operating Supply Voltage | 3.3 V to 5 V |
| ADC | 8 channels, 10-bit resolution |
| Serial Interfaces | SCI, SPI, and I2C |
मुख्य विशेषताएँ
- Combines a 40 MHz S08 core with 16 KB Flash (बनामMC9S08AC16)
- Integrates three serial communication interfaces (बनामMC9S08AC16C)
- Provides an 8-channel 10-bit ADC (बनामS9S08AW16AE0MFT)
डिज़ाइन नोट्स
Design the PCB around the exact 42-pin CBE footprint and verify every pin assignment in the MC9S08AC16 pin-description table before routing. Place the required supply-decoupling capacitors at the corresponding power pins, provide a clean ground return, and keep analog inputs away from high-current switching nodes. The through-hole package is forgiving for prototypes, but a footprint mismatch can still prevent mechanical insertion or cause an electrical substitution error.
Treat SPI, I2C, and SCI nets as board-level interfaces that require deliberate topology and return paths. Keep clock and data traces short where possible, route continuous ground references beneath the board, and place pull-ups for I2C near the master or bus endpoint. For SCI, maintain suitable signal levels and isolation from motor or switching-supply stages to prevent communication errors and damage to the 3.3 V to 5 V device.
Do not assume that every MCU in the MC9S08AC16 family is a drop-in substitute for MC9S08AC16CBE. Compare the exact package suffix, pinout, memory map, peripheral multiplexing, oscillator requirements, and programming interface. The 40 MHz core and 16 KB Flash identify the performance class, but software compatibility and mechanical interchangeability still depend on the specific device ordering code and its datasheet.
Use a supply that remains within the stated 3.3 V to 5 V range across temperature, tolerance, and transient conditions. Add local bulk and high-frequency decoupling near the MCU, and route return current without narrow shared paths that couple motor, relay, or display currents into the analog section. If any peripheral subsystem requires a voltage outside the MCU range, use an appropriate level translator or interface rather than allowing excessive input voltage.
अनुपालन जानकारी
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact MPN in the referenced sources.