NXP Semiconductors

MC9S08AC16CBE - 8-Bit 40MHz 16KB Flash MCU | NXP | DIP

MPN: MC9S08AC16CBE ✓ Nakahanda
3.3 V to 5 V Vdss 42-pin SPDIP Package 40 MHz Speed 16 KB (16K x 8 bytes) Memory
MOQ: 1 |

MC9S08AC16CBE Ulas

The NXP Semiconductors MC9S08AC16CBE is an 8-bit S08 microcontroller with a 40 MHz core, 16 KB of Flash program memory, and a 42-pin through-hole DIP package. It operates from 3.3 V to 5 V and integrates communication and analog peripherals, including SPI, I2C, SCI, and an 8-channel 10-bit ADC. The MC9S08AC16CBE is designed for compact embedded-control systems that need deterministic 8-bit processing without the complexity of a 32-bit MCU.

An 8-bit microcontroller is a programmable semiconductor containing a processor core, nonvolatile program memory, working memory, and integrated peripherals. In the broader embedded hierarchy, the S08 core belongs to the HCS08 family of 8-bit MCUs, while the MC9S08AC16 device combines that core with Flash memory and mixed-signal peripherals. This product type is positioned between simple logic controllers and higher-performance 32-bit microcontrollers.

Three defining capabilities support its use in embedded products. First, the 40 MHz S08 core provides the operating speed identified for the device. Second, its 16 KB Flash memory supports embedded firmware storage, with the manufacturer listing the organization as 16K x 8 bytes. Third, the integrated peripheral set includes SPI, I2C, SCI, and an 8-channel 10-bit ADC, reducing the need for external interface and conversion components.

The MC9S08AC16CBE belongs to the MC9S08AC16 family, whose documentation describes a low-cost, high-performance HCS08 architecture with an 8-bit CPU. Its through-hole 42-pin DIP construction supports prototyping, education, repair, and industrial control assemblies where a socketed or leaded component is preferred over a fine-pitch surface-mount package. The family documentation also describes pin-compatible 8-bit and 32-bit device pairs for migration paths.

Typical applications include motor and actuator controllers, compact industrial sensing modules, keypad-controlled equipment, serial data concentrators, and educational embedded-control platforms. The SPI, I2C, and SCI interfaces allow the MCU to connect sensors, transceivers, displays, or host processors, while the 10-bit ADC supports cost-sensitive analog measurements such as potentiometer, divider, and simple sensor inputs.

Designers should verify the exact 42-pin pinout, oscillator requirements, programming method, and peripheral multiplexing against the MC9S08AC16 datasheet before laying out a PCB. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be configured to avoid unintended transitions. The DIP package simplifies hand assembly but occupies more board area than a surface-mount alternative.

This product record combines the MC9S08AC16CBE's confirmed architecture, memory, clock, package, voltage, and peripheral characteristics with sourcing guidance, replacement analysis, and practical integration considerations. It also distinguishes verified drop-in alternatives from devices that require different packages or pinouts, helping engineers evaluate redesign risk before making a component substitution.

Mga alternatibo na pwedeng ilagay na MC9S08AC16CBE — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MC9S08AC16CBE (parehas na form factor at footprint) — pagkakaiba sa Core, Mounting Type, Package.

NXP Semiconductors
Core: HCS08 (8-bit CISC)
Mounting Type: Through-Hole (THT)
Package: 42-pin SPDIP (DIP-42)
Ikabit sa MC9S08AC16CBE →

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

MC9S08AC16CBE Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8-bit microcontroller (MCU)
Core S08 core
Maximum Core Frequency 40 MHz
Flash Program Memory 16 KB (16K x 8 bytes)
Supply Voltage na Operasyon 3.3 V to 5 V
Packhaging 42-pin SPDIP
Package Type 42-pin through-hole DIP
Total Pin Count 42 pins
ADC Resolution 10 bits
ADC Channels 8 channels
Serial Interface SCI
Synchronous Serial Interface SPI
Inter-Integrated Circuit Interface I2C
Architecture HCS08 8-bit
Uri ng Pagpapasok Through-hole

Gabay sa Pin Configuration ng MC9S08AC16CBE 42-pin through-hole dip

Pin configuration para sa MC9S08AC16CBE (42-pin through-hole dip package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 42-pin through-hole dip package para sa MC9S08AC16CBE

Wala ng detalyadong pinout data na magagamit para sa MC9S08AC16CBE.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MC9S08AC16CBE ay nararapat para sa 6 aplikasyons: Compact Industrial Control, Analog Sensor Interface, Serial Data Concentrator, Educational Microcontroller Platform, Motor and Actuator Control, Instrumentation and Signal Conditioning.

🏭

Compact Industrial Control

The MC9S08AC16CBE fits compact industrial-control assemblies that require deterministic 8-bit logic, moderate clock speed, and a through-hole package. Its 40 MHz S08 core can service control tasks and communication routines, while 16 KB Flash stores the operating firmware. SPI, I2C, and SCI provide paths to sensors, remote I/O, and supervisory equipment without requiring separate interface ICs. The 42-pin SPDIP construction also simplifies socketed maintenance and prototype rework. For an industrial design, engineers should still verify environmental ratings, isolation boundaries, grounding, and power-supply tolerance for the final enclosure and production test requirements.

🧩

Analog Sensor Interface

The MC9S08AC16CBE is appropriate for compact sensor modules requiring several low-speed analog measurements and local control. Its integrated 8-channel, 10-bit ADC can monitor divider networks, potentiometers, and basic analog sensors, while the 40 MHz core handles filtering, calibration, and communication tasks. The 3.3 V to 5 V operating range supports common embedded supply arrangements, and SPI or I2C can connect the controller to a more capable sensor or external converter. Because the ADC is intended for general embedded measurement rather than precision instrumentation, the design should include suitable input conditioning, reference strategy, and protection before routing external signals.

🌐

Serial Data Concentrator

The MC9S08AC16CBE can serve as a small serial data concentrator when a product must aggregate information from several low-speed peripherals. SCI provides a straightforward path to a host, supervisor, or modem, while SPI and I2C support sensors, memory, and bus devices. The 40 MHz S08 core leaves processing headroom for packet formatting, basic filtering, status monitoring, and diagnostics, and 16 KB Flash supports a focused embedded application. Engineers should assign peripheral functions through the device configuration and verify pin multiplexing in the MC9S08AC16 datasheet, particularly if the PCB must support multiple communication modes or alternate peripheral functions.

📱

Educational Microcontroller Platform

The MC9S08AC16CBE is well suited to educational embedded-control platforms because it combines an approachable 8-bit architecture with a 40 MHz core, 16 KB Flash, and common serial peripherals. The 42-pin DIP package exposes a generous pin count for laboratory breadboards, solderless prototyping boards, and socket-based training kits. Learners can use the ADC for analog experiments, SCI for terminal communication, and SPI or I2C for expansion modules without designing a fine-pitch footprint. The through-hole construction also makes it easier to replace a damaged MCU. Instruction should identify the exact CBE pinout and include a proper programming header, decoupling, and protected debug access rather than relying on improvised connections.

⚡

Motor and Actuator Control

The MC9S08AC16CBE can supervise basic motor, valve, relay, or actuator functions where the control loop does not require a high-performance real-time processor. Its 40 MHz 8-bit core can execute state-machine logic, timing routines, and fault monitoring, while the serial interfaces allow commands and diagnostics to be exchanged with a higher-level controller. The 42-pin SPDIP package provides straightforward access to general-purpose I/O in a rugged prototype or serviceable industrial assembly. Motor circuitry should remain separate from the MCU supply and grounds, with appropriate driver transistors, flyback protection, isolation where needed, and hardware shutdown paths for conditions that cannot safely wait for software intervention.

🖥️

Instrumentation and Signal Conditioning

The MC9S08AC16CBE is appropriate for compact instrumentation modules that need local signal conditioning, status handling, and digital communications. Its 8-channel, 10-bit ADC supports multiple general-purpose analog inputs, while the 40 MHz core can perform calibration, scaling, filtering, and threshold logic before sending results through SCI, SPI, or I2C. Operating from 3.3 V to 5 V makes the device adaptable to common embedded rails, and the DIP package supports serviceable prototypes. Instrumentation designs should use buffered sensor inputs, suitable reference and ground arrangements, protection against external transients, and calibration storage appropriate for the required measurement accuracy.

Buod ng mga Inirekomendang Produkto

MC9S08AC16CBE NXP Semiconductors Ginagamit sa: Compact Industrial Control, Analog Sensor Interface, Serial Data Concentrator, Educational Microcontroller Platform, Motor and Actuator Control, Instrumentation and Signal Conditioning MC9S08AC16 Device-family reference Ginagamit sa: Compact Industrial Control, Analog Sensor Interface, Serial Data Concentrator, Educational Microcontroller Platform, Motor and Actuator Control, Instrumentation and Signal Conditioning
What is the operating voltage of MC9S08AC16CBE?
The MC9S08AC16CBE operates from 3.3 V to 5 V. According to the MC9S08AC16 manufacturer documentation, the device belongs to the MC9S08AC16 family of low-cost, high-performance HCS08 8-bit microcontrollers. The manufacturer page identifies the CBE orderable configuration as a 42-pin SPDIP implementation, making the voltage range and package selection important checks before PCB assembly or replacement.
How much Flash memory and how much clock speed does the MC9S08AC16CBE have?
The MC9S08AC16CBE provides 16 KB of Flash program memory and operates at up to 40 MHz. The DigiKey product record identifies the S08 device as an 8-bit, 40 MHz MCU with 16 KB of Flash arranged as 16K x 8 bytes. These values place it between simple 8-bit controllers and more capable 32-bit processors while supporting compact embedded firmware and responsive peripheral servicing.
Where can I download the MC9S08AC16CBE datasheet PDF?
The MC9S08AC16CBE datasheet is available through the MC9S08AC16 manufacturer document link on this page and through the Octopart datasheet listing. The family documentation covers the MC9S08AC16 series and includes a 138-page PDF with package-migration information. Engineers should use the manufacturer document for definitive electrical characteristics, pin descriptions, timing, programming, and package details.
Where can I find the MC9S08AC16CBE pinout?
The MC9S08AC16CBE pinout is documented in the MC9S08AC16 family datasheet, which covers the 42-pin CBE package. The product listing identifies the device as a 42-pin SPDIP package, while the family document contains the authoritative pin-description and package drawings. Use that document when assigning tracks, programming connectors, supply pins, ground pins, and analog inputs.
What peripherals are integrated into the MC9S08AC16CBE?
The MC9S08AC16CBE integrates SPI, I2C, SCI, and an 8-channel 10-bit ADC. According to the NXP product information reproduced by the Microchip USA listing, these interfaces support sensors, converters, serial transceivers, and host-processor communications. The ADC provides 10-bit conversion resolution across eight channels for basic analog measurement functions.
Where can I buy MC9S08AC16CBE online?
Use the Request a Quote form on this page to request MC9S08AC16CBE availability, commercial terms, and lead time. The manufacturer-specific order code must be quoted exactly as MC9S08AC16CBE, including the 42-pin SPDIP package suffix. A quotation request allows the supply channel to confirm current inventory, authorized sourcing, and the quantity required without relying on potentially stale public stock indications.
What is the price of MC9S08AC16CBE?
Current commercial pricing for MC9S08AC16CBE is handled through the Request a Quote form on this page. The exact configuration is an 8-bit, 40 MHz S08 MCU with 16 KB Flash in a 42-pin SPDIP package. Submit the required quantity and target delivery information so the quote can reflect current component sourcing, packaging, and logistics conditions.
What is the lead time for MC9S08AC16CBE?
The current lead time for MC9S08AC16CBE should be confirmed through the Request a Quote form on this page. Lead time depends on order quantity, package configuration, current inventory, and manufacturing conditions. When requesting a quotation, identify MC9S08AC16CBE exactly and state the required quantity and delivery schedule so procurement can provide an actionable commitment.
Is MC9S08AC16CBE in stock?
MC9S08AC16CBE availability should be confirmed through the Request a Quote form on this page. The product is listed by major sourcing channels, but live inventory can vary by order quantity and package suffix. A quotation request will establish the current status for the exact 42-pin SPDIP configuration and avoid treating a general catalog listing as a guaranteed stock commitment.
MC9S08AC16CBE vs MC9S08AC16C - which is better for a new design?
MC9S08AC16CBE is the specifically identified 42-pin SPDIP orderable configuration, while MC9S08AC16C can denote another package or ordering option. For a new through-hole design, choose MC9S08AC16CBE when the PCB footprint and pinout explicitly correspond to the CBE package. The MC9S08AC16 datasheet and package drawings must be checked before treating another suffix as interchangeable.
What is the best drop-in replacement for MC9S08AC16CBE?
No confirmed pin-to-pin drop-in replacement for MC9S08AC16CBE is identified in the available cross-reference results. A valid replacement must preserve the 42-pin SPDIP footprint, 8-bit S08 programming model, 40 MHz core speed, 16 KB Flash organization, supply range, and peripheral pin assignments. Device search tools identify related MCUs, but a result should not be called a drop-in replacement unless those requirements are documented.
Can MC9S08AC16CBE replace an S08-family microcontroller?
The MC9S08AC16CBE can replace another device only after its pinout, memory map, peripherals, oscillator configuration, and programming interface are verified against the original design. The part provides 16 KB Flash, a 40 MHz S08 core, SPI, I2C, SCI, and an 8-channel 10-bit ADC. A same-family label alone does not guarantee that software, timing, and peripheral connections remain unchanged.
When should I choose MC9S08AC16CBE over another 8-bit MCU?
Choose MC9S08AC16CBE when the design specifically benefits from a 40 MHz S08 core, 16 KB Flash, integrated SPI, I2C, SCI, and an 8-channel 10-bit ADC in a 42-pin SPDIP package. The leaded package is useful for prototypes, educational platforms, socketed assemblies, and repairable industrial controllers. Choose another MCU if it offers a smaller footprint, different peripheral mix, newer toolchain, or a verified pin-compatible sourcing path.
Is MC9S08AC16CBE suitable for industrial control and sensor applications?
The MC9S08AC16CBE is suitable for cost-sensitive embedded-control and sensing designs that can use an 8-bit architecture and 42-pin through-hole package. Its 40 MHz core handles control logic, while SPI, I2C, SCI, and the 8-channel 10-bit ADC support common sensor and communication paths. Industrial suitability still requires checking temperature limits, isolation, grounding, and regulatory requirements for the finished equipment.
What are the key specifications of MC9S08AC16CBE that engineers should know?
The key MC9S08AC16CBE specifications are its 40 MHz S08 core, 16 KB Flash, 3.3 V to 5 V operating range, and 42-pin SPDIP package. Integrated resources include SPI, I2C, SCI, and an 8-channel 10-bit ADC. These characteristics define its suitability for compact 8-bit embedded controllers where moderate processing speed, mixed-signal measurement, multiple serial interfaces, and through-hole assembly are priorities.
How do I verify the MC9S08AC16CBE programming and peripheral configuration?
Use the MC9S08AC16 family datasheet and its pin-description information to verify programming, clock, reset, and peripheral multiplexing for the 42-pin CBE package. The device is an HCS08-family 8-bit MCU with 16 KB Flash and a 40 MHz core, so existing S08 code and toolchain assumptions may apply. Confirm the exact package suffix, pin assignments, and any mask or device-specific differences before programming production hardware.

Impormasyon ng Talumpati sa Engineering for MC9S08AC16CBE — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MC9S08AC16CBE when the design needs an 8-bit S08 controller operating at 40 MHz, with 16 KB Flash, SPI, I2C, SCI, and an 8-channel 10-bit ADC in a 42-pin SPDIP package. It is particularly useful for prototypes, educational platforms, repairable assemblies, and compact control products where through-hole construction simplifies assembly. Choose another MCU when board area is critical, when the application requires a 32-bit architecture or substantially more Flash, or when a smaller surface-mount package is mandatory. Do not treat the family base designation MC9S08AC16 or the compared 48-QFN S9S08AW16AE0MFT as a direct substitute: package and pin compatibility must be demonstrated. For any proposed replacement, verify the footprint, supply range, oscillator arrangement, peripheral multiplexing, memory map, interrupt behavior, and programming process before releasing the PCB.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 42-pin SPDIP
Brand NXP Semiconductors
Core Architecture 8-bit S08
Maximum Core Frequency 40 MHz
Flash Program Memory 16 KB (16K x 8 bytes)
Operating Supply Voltage 3.3 V to 5 V
ADC 8 channels, 10-bit resolution
Serial Interfaces SCI, SPI, and I2C

Pangunahing mga Pagkakaiba

  • Combines a 40 MHz S08 core with 16 KB Flash (kumpara saMC9S08AC16)
  • Integrates three serial communication interfaces (kumpara saMC9S08AC16C)
  • Provides an 8-channel 10-bit ADC (kumpara saS9S08AW16AE0MFT)

Talaan ng Disenyo

Design the PCB around the exact 42-pin CBE footprint and verify every pin assignment in the MC9S08AC16 pin-description table before routing. Place the required supply-decoupling capacitors at the corresponding power pins, provide a clean ground return, and keep analog inputs away from high-current switching nodes. The through-hole package is forgiving for prototypes, but a footprint mismatch can still prevent mechanical insertion or cause an electrical substitution error.

Treat SPI, I2C, and SCI nets as board-level interfaces that require deliberate topology and return paths. Keep clock and data traces short where possible, route continuous ground references beneath the board, and place pull-ups for I2C near the master or bus endpoint. For SCI, maintain suitable signal levels and isolation from motor or switching-supply stages to prevent communication errors and damage to the 3.3 V to 5 V device.

Do not assume that every MCU in the MC9S08AC16 family is a drop-in substitute for MC9S08AC16CBE. Compare the exact package suffix, pinout, memory map, peripheral multiplexing, oscillator requirements, and programming interface. The 40 MHz core and 16 KB Flash identify the performance class, but software compatibility and mechanical interchangeability still depend on the specific device ordering code and its datasheet.

Use a supply that remains within the stated 3.3 V to 5 V range across temperature, tolerance, and transient conditions. Add local bulk and high-frequency decoupling near the MCU, and route return current without narrow shared paths that couple motor, relay, or display currents into the analog section. If any peripheral subsystem requires a voltage outside the MCU range, use an appropriate level translator or interface rather than allowing excessive input voltage.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact MPN in the referenced sources.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MC9S08AC16CBE datasheet MC9S08AC16CBE pinout MC9S08AC16CBE datasheet pdf MC9S08AC16CBE specifications MC9S08AC16CBE price MC9S08AC16CBE stock MC9S08AC16CBE equivalent MC9S08AC16CBE replacement MC9S08AC16CBE vs MC9S08AC16C MC9S08AC16CBE 42 pin DIP MC9S08AC16CBE ADC application NXP MC9S08AC16CBE

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors MC9S08AC16CBE MC9S08AC16 S08 core HCS08 8-bit microcontroller MCU embedded controller semiconductor 16 KB Flash memory 40 MHz core clock SCI SPI I2C 10-bit ADC 8-channel ADC 42-pin SPDIP DIP package through-hole technology SMD 3.3 V to 5 V operation industrial control sensor interface serial communication
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ