NXP Semiconductors

MC9S08EL16CTL - 8-Bit 40MHz MCU with 16KB Flash | NXP

MPN: MC9S08EL16CTL ✗ जीवन की समाप्ति
28-pin TSSOP Package 40 MHz Speed 16 KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

MC9S08EL16CTL अवलोकन

NXP Semiconductors MC9S08EL16CTL is an 8-bit HCS08 microcontroller with a 40 MHz processor, 16 KB of flash memory, an embedded Slave LIN Interface Controller, 1 KB of EEPROM, a 12-bit ADC, and an LCD driver in a 28-pin TSSOP package. It is positioned for automotive and industrial systems that need deterministic 8-bit control alongside LIN communications and mixed-signal measurement.

An HCS08 microcontroller is an 8-bit MCU in the broader embedded-control hierarchy of semiconductor, microcontroller, and embedded processor devices. The S08EL family combines the enhanced HCS08 instruction set, general-purpose I/O, serial communications, analog conversion, and EEPROM-backed configuration. This combination makes it useful where a compact, deterministic controller is preferable to a higher-complexity processor.

The principal device characteristics are a 40 MHz operating speed, 16 KB of program flash, and support for up to 32 interrupt or reset sources. The embedded Slave LIN Interface Controller reduces the peripheral count needed for LIN slave nodes, while the 12-bit ADC supports analog sensor acquisition. Internal clock and timer resources allow the MCU to operate without an external crystal in suitable clock configurations.

The MC9S08EL16CTL belongs to the low-cost, high-performance HCS08 family, whose parts provide different combinations of flash, EEPROM, communications modules, analog peripherals, and package options. Its architecture is designed for compact embedded control rather than high-bandwidth computation. This makes its resources more predictable for control loops, communication handling, power sequencing, and general-purpose monitoring.

Typical uses include automotive LIN slave modules, industrial sensor controllers, HVAC and building-control panels, motor or actuator monitoring, small appliance controls, and low-cost instrument interfaces. The 28-pin TSSOP package supports dense PCB layouts, while the LIN interface is particularly useful in distributed vehicle and industrial networks.

Designers should verify the operating voltage, detailed pin assignments, reset requirements, clock configuration, and memory map in the manufacturer datasheet before layout release. Because this device is marked NRND, new designs should normally be directed to the currently supported S08 family unless the NXP product-change notice explicitly permits continued use.

के लिए ड्रॉप-इन विकल्प MC9S08EL16CTL — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC9S08EL16CTL (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, RoHS Status.

NXP Semiconductors
Package: 20-pin TSSOP
RoHS Status: Compliant
इसके साथ तुलना करें MC9S08EL16CTL →

MC9S08SL16CTL

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 28-pin TSSOP
Same 16 KB flash class and 40 MHz speed class, but peripheral mapping and device-family feature differences require pin and register review

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MC9S08EL32CTJ

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
NXP Semiconductors
📦 28-pin TSSOP
8-bit HCS08 microcontroller · 32 KB · 1 KB · 40 MHz · 2.7 V to 5.5 V · 8-bit · HCS08 core · 20-pin TSSOP

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC9S08EL8

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 28-pin TSSOP
Flash decreases from 16 KB to 8 KB, a 50% reduction, while retaining the 40 MHz S08EL performance class

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MC9S08EL16CTL Maximum Ratings और Electrical Characteristics

Product Type 8-bit HCS08 microcontroller
Maximum CPU Frequency 40 MHz
Program Flash Memory 16 KB
Flash Organization 16K x 8 bits
EEPROM Memory 1 KB
ADC Resolution 12 bits
Communications Embedded Slave LIN Interface Controller (SLIC)
Peripheral Function LCD driver
Clock Source Internal clock source
Interrupt and Reset Sources Up to 32 sources
Core Architecture Enhanced HCS08 with HC08 instruction set
पैकेज 28-pin TSSOP
माउंटिंग प्रकार Surface mount
लाइफसाइकिल स्थिति NRND
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification unknown
Lead-Free Status unknown
Halogen-Free Status unknown

MC9S08EL16CTL 28-pin tssop पिन कॉन्फ़िगरेशन गाइड

MC9S08EL16CTL (28-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

MC9S08EL16CTL के लिए 28-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S08EL16CTL.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MC9S08EL16CTL के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive LIN Slave Controller, Industrial Sensor Interface, Building Control and HVAC Panel, Small Appliance Control, Actuator and Motor Monitoring, Low-Cost Embedded Measurement Module.

🚗

Automotive LIN Slave Controller

The MC9S08EL16CTL fits a LIN slave node because its embedded Slave LIN Interface Controller handles communication logic while the 40 MHz HCS08 core performs application processing. Its 16 KB flash can hold the protocol and control firmware, while 1 KB of EEPROM can preserve configuration and diagnostic values. Using the device in a 28-pin TSSOP outline supports compact modules with limited PCB area. Before implementation, verify the exact LIN transceiver interface pins and peripheral configuration against the manufacturer pin table.

🏭

Industrial Sensor Interface

The MC9S08EL16CTL can serve as the local controller for industrial sensors that require analog measurement, EEPROM-backed calibration, and digital reporting. Its 12-bit ADC supports sensor acquisition, and the 1 KB EEPROM can retain device settings across power cycles. The 40 MHz processor provides timing margin for filtering and communication tasks. The design should include suitable input conditioning and protection, and it should verify the package pin assignments before routing analog signals.

🏭

Building Control and HVAC Panel

A building-control panel can use the MC9S08EL16CTL for centralized monitoring, actuator commands, and configuration storage. The embedded LIN interface supports low-cost distributed nodes, the 12-bit ADC handles analog environmental sensors, and the LCD driver supports local status indication where the exact package variant provides that function. Its 16 KB flash accommodates a compact control application, while EEPROM supports persistent setpoints. Firmware must remain within the memory map defined for the selected device revision.

🔧

Small Appliance Control

The MC9S08EL16CTL is appropriate for compact appliance controllers that need deterministic control, nonvolatile parameters, and limited external communications. The 40 MHz HCS08 core can coordinate motor timing, button inputs, and sensor readings, while the 1 KB EEPROM retains user settings or calibration values. The 28-pin TSSOP package reduces board footprint compared with larger through-hole controllers. Designers should assess whether the NRND lifecycle creates an unacceptable sourcing risk and consider a currently promoted MCU for new high-volume programs.

⚡

Actuator and Motor Monitoring

The MC9S08EL16CTL can monitor actuator or motor subsystem status and report exceptions through a LIN network. Its 12-bit ADC is useful for scaled feedback voltages, while timer and interrupt resources support deterministic sampling and event handling. The 40 MHz core leaves processing margin for debouncing, diagnostics, and communication handling. The analog front end must respect the MCU's pin assignments and electrical limits, and the application should include protection against motor-generated transients and supply disturbances.

🔧

Low-Cost Embedded Measurement Module

The MC9S08EL16CTL supports compact measurement modules where an 8-bit controller, EEPROM, and analog conversion are sufficient without the overhead of a 32-bit processor. The 16 KB flash can store acquisition, calibration, and communication routines, while the 12-bit ADC provides the sensing interface. The 28-pin TSSOP package is useful for densely populated instruments. Firmware designers should use the memory map and interrupt-vector tables in the manufacturer datasheet, particularly when reusing code across related S08EL members.

What are the key specifications of MC9S08EL16CTL that engineers should know?
The MC9S08EL16CTL is an 8-bit NXP HCS08 MCU rated at 40 MHz, with 16 KB of flash, 1 KB of EEPROM, a 12-bit ADC, an embedded Slave LIN Interface Controller, and a 28-pin TSSOP package. According to the NXP MC9S08EL32 and MC9S08SL16 series datasheet, the enhanced HCS08 core supports as many as 32 interrupt or reset sources, making the device suitable for compact automotive, industrial, sensor, and communication-control designs.
What is the operating frequency of MC9S08EL16CTL?
The MC9S08EL16CTL operates at a maximum CPU frequency of 40 MHz. The NXP product listing identifies the device as an S08EL-series 8-bit microcontroller with a 40 MHz processor. This clock rate provides sufficient execution speed for LIN-node handling, sensor conversion, timing functions, and supervisory control while retaining the simpler programming model of an 8-bit MCU.
How much memory does MC9S08EL16CTL have?
The MC9S08EL16CTL contains 16 KB of program flash organized as 16K x 8 bits and includes 1 KB of EEPROM. The 16 KB flash stores executable firmware, while the EEPROM supports parameters, calibration values, or persistent configuration that may need to survive power removal. These figures are identified by NXP in the product listing and the MC9S08EL32 and MC9S08SL16 series datasheet.
Does MC9S08EL16CTL include a LIN interface?
Yes, the MC9S08EL16CTL includes an embedded Slave LIN Interface Controller, identified as SLIC. This dedicated peripheral supports integration into LIN slave nodes and can reduce the need for a separate LIN transceiver interface controller. NXP describes the device as an S08-series MCU with embedded Slave LIN Interface Controller for automotive and industrial communication applications.
What package does MC9S08EL16CTL use?
The MC9S08EL16CTL is supplied in a 28-pin TSSOP surface-mount package. The NXP product listing and distributor specifications identify the 28-TSSOP configuration. The exact pin names, power pins, communications functions, and exposed package details should be assigned from the manufacturer pin-description table, because pin functions are not fully enumerated in the product summary.
Where can I download the MC9S08EL16CTL datasheet PDF?
The manufacturer datasheet is available through NXP at https://www.nxp.com/docs/en/data-sheet/MC9S08EL32.pdf. It is titled for the MC9S08SL16 and MC9S08EL32 series and covers devices that use the enhanced HCS08 core. The NXP product page at https://www.nxp.com/part/MC9S08EL16CTL also provides the product-specific data-sheet link and lifecycle information.
Where can I find the MC9S08EL16CTL pinout?
The MC9S08EL16CTL pin assignment is found in the pin-connection and package-information section of the NXP MC9S08EL32 and MC9S08SL16 series datasheet. The device uses a 28-pin TSSOP outline, but the web product summary does not reproduce every numbered signal. Use the manufacturer pin-description table when assigning PCB nets, power connections, analog inputs, and communication functions.
Is MC9S08EL16CTL suitable for automotive applications?
The MC9S08EL16CTL is suitable for automotive applications that require an 8-bit control node with LIN communication, although its AEC-Q100 qualification status must be confirmed for the exact ordering variant. NXP describes the MCU family for automotive and industrial use and marks this part as NRND. New automotive programs should review the NXP product-change notice and current sourcing recommendation before design release.
MC9S08EL16CTL vs MC9S08SL16CTL - which is better for a LIN slave design?
The MC9S08EL16CTL and MC9S08SL16CTL are both 16 KB, 40 MHz-class S08 devices associated with embedded LIN capability, but they sit in different member selections within the related product families. Choose the MC9S08EL16CTL when its S08EL peripheral set and 28-pin TSSOP assignment match the existing design. A substitution should be approved only after checking the pin table, memory map, timer channels, and LIN implementation.
When should I choose MC9S08EL16CTL over a newer S08 microcontroller?
Choose the MC9S08EL16CTL when maintaining an existing 28-pin TSSOP LIN-node design and using the S08EL feature set is more important than selecting a currently promoted MCU. Its 40 MHz HCS08 core, 16 KB flash, 1 KB EEPROM, and embedded Slave LIN Interface Controller remain well matched to compact control tasks. For new projects, the NRND status makes a currently supported S08 option preferable when its requirements are compatible.
What is the best drop-in replacement for MC9S08EL16CTL?
The closest documented drop-in candidate is the NXP MC9S08SL16CTL because it is listed as a related 16 KB, 40 MHz S08 device with a 28-pin TSSOP package and embedded Slave LIN Interface Controller. Exact replacement approval still requires pin-by-pin and register-level review because family-member peripheral assignments can differ. Do not approve an MC9S08EL16CTJ substitution without changing the PCB, since that ordering variant uses a 20-pin TSSOP package.
Can MC9S08SL16CTL replace MC9S08EL16CTL without a PCB change?
MC9S08SL16CTL is the most relevant same-family candidate for evaluating as a drop-in replacement because it shares the 16 KB, 40 MHz class, embedded Slave LIN Interface Controller, and 28-pin TSSOP format. However, a no-change replacement requires confirmation of every pin, peripheral mapping, interrupt vector, timer, ADC channel, and programming configuration. The manufacturer comparison information should be reviewed before production substitution.
Where can I buy MC9S08EL16CTL online?
Use the Request a Quote form on this page to request MC9S08EL16CTL availability, unit pricing, minimum order quantity, and current lead time. Because the manufacturer marks the device NRND, procurement should confirm remaining factory inventory and authorized-channel traceability. NXP's product page remains the authoritative source for lifecycle notices and product-change information.
What is the price and lead time for MC9S08EL16CTL?
Use the Request a Quote form on this page for current MC9S08EL16CTL pricing, stock, minimum order quantity, and lead time. The part is NRND, so supply can vary and lead time may require an inventory check rather than a standard active-production estimate. Quote requests should state the required package suffix MC9S08EL16CTL, quantity, and any date-code or traceability requirements.
Is MC9S08EL16CTL in stock?
Current MC9S08EL16CTL stock should be requested through the Request a Quote form on this page. The manufacturer classifies the device as NRND, so its inventory may be limited and may not be replenished under normal production scheduling. Buyers should avoid assuming that the presence of catalog listings means factory stock is available for the exact 28-pin TSSOP ordering code.
What can replace MC9S08EL16CTL?
MC9S08SL16CTL is the leading same-manufacturer replacement candidate to evaluate because it matches the 16 KB memory class, 40 MHz performance class, embedded LIN function, and 28-pin TSSOP format. Its final drop-in status depends on exact pin and peripheral equivalence. The MC9S08EL16CTJ is not a PCB-compatible substitute because its 20-pin TSSOP package has a different footprint and pin count.

के लिए इंजीनियरिंग संदर्भ डेटा MC9S08EL16CTL — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MC9S08EL16CTL when maintaining an existing 28-pin TSSOP S08EL design that needs a 40 MHz 8-bit core, 16 KB of flash, 1 KB of EEPROM, and embedded Slave LIN Interface Controller functionality. Its NRND status is acceptable primarily for lifecycle-managed maintenance or approved programs where the product-change notice permits continued sourcing. Evaluate MC9S08SL16CTL first when another related 16 KB S08 member appears functionally closer, but verify its pin, timer, ADC, and register compatibility before calling it a drop-in replacement. MC9S08EL32 is useful only when the firmware genuinely benefits from 32 KB of flash; the extra memory does not make it functionally identical. MC9S08EL8 reduces flash to 8 KB and may be inadequate for the existing application. Do not use the 20-pin MC9S08EL16CTJ as a no-change replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MC9S08SL16CTL MC9S08EL32 MC9S08EL8
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Frequency 40 MHz 40 MHz 40 MHz 40 MHz
Program Flash 16 KB 16 KB 32 KB 8 KB
Core Architecture Enhanced HCS08, 8-bit Enhanced HCS08, 8-bit Enhanced HCS08, 8-bit Enhanced HCS08, 8-bit

मुख्य विशेषताएँ

  • Integrated LIN slave control with a 40 MHz 8-bit core (बनामMC9S08EL16CTJ)
  • Balanced memory configuration for embedded firmware and retained parameters (बनामMC9S08EL32)
  • Direct S08EL continuity for low-cost embedded-control designs (बनामMC9S08SL16CTL)

डिज़ाइन नोट्स

Do not substitute MC9S08EL16CTJ for MC9S08EL16CTL on an existing PCB. The CTJ ordering code uses a 20-pin TSSOP, while the target device uses a 28-pin TSSOP, so the footprints and pin counts differ. Also treat MC9S08SL16CTL as a candidate requiring engineering approval rather than an automatic replacement: compare the complete pin table, peripheral assignments, memory map, and interrupt vectors before changing the BOM.

Use the manufacturer pin-connection table to identify every supply and ground connection in the 28-pin TSSOP. Place local high-frequency bypass capacitors close to the device's supply pins and connect the ground return directly into the ground plane. Do not infer the operating-voltage limit from generic S08-family literature; confirm the MC9S08EL16CTL limits in the manufacturer datasheet before selecting regulators or protection components.

Keep analog input traces away from LIN, switching-supply, and high-current motor paths. Route sensor inputs with short traces, guard them with grounded geometry where appropriate, and terminate unwanted signals at the source. For a LIN node, follow the reference layout and transceiver guidance for the selected MC9S08EL16CTL package to preserve signal integrity and avoid introducing additional bus-side EMI.

Because the manufacturer lists MC9S08EL16CTL as NRND, avoid designing new demand around an assumed long-term production supply. Review the NXP product-change notice, request traceability and remaining inventory information through the Request a Quote form, and evaluate a currently promoted S08 MCU if the new design can tolerate changes in firmware or board layout. For an existing design, freezing the approved package and firmware configuration reduces certification risk.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

NXP identifies MC9S08EL16CTL as NRND. Exact environmental compliance and automotive qualification for the ordering variant must be confirmed from the manufacturer product page or declarations.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC9S08EL16CTL datasheet MC9S08EL16CTL datasheet pdf MC9S08EL16CTL pinout MC9S08EL16CTL specifications MC9S08EL16CTL equivalent MC9S08EL16CTL replacement MC9S08EL16CTL cross reference MC9S08EL16CTL vs MC9S08SL16CTL MC9S08EL16CTL price MC9S08EL16CTL stock NXP MC9S08EL16CTL MC9S08EL16CTL 28 pin TSSOP MC9S08EL16CTL LIN interface MC9S08EL16CTL automotive microcontroller What is the MC9S08EL16CTL?

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors MC9S08EL16CTL MC9S08SL16CTL MC9S08EL32 MC9S08EL8 HCS08 8-bit microcontroller embedded processor semiconductor Slave LIN Interface Controller SLIC 12-bit ADC EEPROM LCD driver 28-pin TSSOP TSSOP family surface mount SMD automotive electronics industrial control sensor interface 40 MHz 16 KB flash interrupt controller
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें