MC9S08EL16CTL - 8-Bit 40MHz MCU with 16KB Flash | NXP
MPN: MC9S08EL16CTL ✗ Son Kullanım ZamanıMC9S08EL16CTL Genel Bakış
An HCS08 microcontroller is an 8-bit MCU in the broader embedded-control hierarchy of semiconductor, microcontroller, and embedded processor devices. The S08EL family combines the enhanced HCS08 instruction set, general-purpose I/O, serial communications, analog conversion, and EEPROM-backed configuration. This combination makes it useful where a compact, deterministic controller is preferable to a higher-complexity processor.
The principal device characteristics are a 40 MHz operating speed, 16 KB of program flash, and support for up to 32 interrupt or reset sources. The embedded Slave LIN Interface Controller reduces the peripheral count needed for LIN slave nodes, while the 12-bit ADC supports analog sensor acquisition. Internal clock and timer resources allow the MCU to operate without an external crystal in suitable clock configurations.
The MC9S08EL16CTL belongs to the low-cost, high-performance HCS08 family, whose parts provide different combinations of flash, EEPROM, communications modules, analog peripherals, and package options. Its architecture is designed for compact embedded control rather than high-bandwidth computation. This makes its resources more predictable for control loops, communication handling, power sequencing, and general-purpose monitoring.
Typical uses include automotive LIN slave modules, industrial sensor controllers, HVAC and building-control panels, motor or actuator monitoring, small appliance controls, and low-cost instrument interfaces. The 28-pin TSSOP package supports dense PCB layouts, while the LIN interface is particularly useful in distributed vehicle and industrial networks.
Designers should verify the operating voltage, detailed pin assignments, reset requirements, clock configuration, and memory map in the manufacturer datasheet before layout release. Because this device is marked NRND, new designs should normally be directed to the currently supported S08 family unless the NXP product-change notice explicitly permits continued use.
Drop-in alternatifler için MC9S08EL16CTL — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MC9S08EL16CTL (aynı form faktörü ve ayağa oturma) — farklı olan Package, RoHS Status.
MC9S08SL16CTL
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MC9S08EL32CTJ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MC9S08EL8
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MC9S08EL16CTL Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 8-bit HCS08 microcontroller |
| Maximum CPU Frequency | 40 MHz |
| Program Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| EEPROM Memory | 1 KB |
| ADC Resolution | 12 bits |
| Communications | Embedded Slave LIN Interface Controller (SLIC) |
| Peripheral Function | LCD driver |
| Clock Source | Internal clock source |
| Interrupt and Reset Sources | Up to 32 sources |
| Core Architecture | Enhanced HCS08 with HC08 instruction set |
| Paket | 28-pin TSSOP |
| Montaj Türü | Surface mount |
| Yaşam Döngüsü Durumu | NRND |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
MC9S08EL16CTL 28-pin tssop Pin Yapısı Kılavuzu
MC9S08EL16CTL (28-pin tssop paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MC9S08EL16CTL.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MC9S08EL16CTL için uygundur 6 uygulamas: Automotive LIN Slave Controller, Industrial Sensor Interface, Building Control and HVAC Panel, Small Appliance Control, Actuator and Motor Monitoring, Low-Cost Embedded Measurement Module.
Automotive LIN Slave Controller
The MC9S08EL16CTL fits a LIN slave node because its embedded Slave LIN Interface Controller handles communication logic while the 40 MHz HCS08 core performs application processing. Its 16 KB flash can hold the protocol and control firmware, while 1 KB of EEPROM can preserve configuration and diagnostic values. Using the device in a 28-pin TSSOP outline supports compact modules with limited PCB area. Before implementation, verify the exact LIN transceiver interface pins and peripheral configuration against the manufacturer pin table.
Önerilen
Industrial Sensor Interface
The MC9S08EL16CTL can serve as the local controller for industrial sensors that require analog measurement, EEPROM-backed calibration, and digital reporting. Its 12-bit ADC supports sensor acquisition, and the 1 KB EEPROM can retain device settings across power cycles. The 40 MHz processor provides timing margin for filtering and communication tasks. The design should include suitable input conditioning and protection, and it should verify the package pin assignments before routing analog signals.
Önerilen
Building Control and HVAC Panel
A building-control panel can use the MC9S08EL16CTL for centralized monitoring, actuator commands, and configuration storage. The embedded LIN interface supports low-cost distributed nodes, the 12-bit ADC handles analog environmental sensors, and the LCD driver supports local status indication where the exact package variant provides that function. Its 16 KB flash accommodates a compact control application, while EEPROM supports persistent setpoints. Firmware must remain within the memory map defined for the selected device revision.
Önerilen
Small Appliance Control
The MC9S08EL16CTL is appropriate for compact appliance controllers that need deterministic control, nonvolatile parameters, and limited external communications. The 40 MHz HCS08 core can coordinate motor timing, button inputs, and sensor readings, while the 1 KB EEPROM retains user settings or calibration values. The 28-pin TSSOP package reduces board footprint compared with larger through-hole controllers. Designers should assess whether the NRND lifecycle creates an unacceptable sourcing risk and consider a currently promoted MCU for new high-volume programs.
Önerilen
Actuator and Motor Monitoring
The MC9S08EL16CTL can monitor actuator or motor subsystem status and report exceptions through a LIN network. Its 12-bit ADC is useful for scaled feedback voltages, while timer and interrupt resources support deterministic sampling and event handling. The 40 MHz core leaves processing margin for debouncing, diagnostics, and communication handling. The analog front end must respect the MCU's pin assignments and electrical limits, and the application should include protection against motor-generated transients and supply disturbances.
Önerilen
Low-Cost Embedded Measurement Module
The MC9S08EL16CTL supports compact measurement modules where an 8-bit controller, EEPROM, and analog conversion are sufficient without the overhead of a 32-bit processor. The 16 KB flash can store acquisition, calibration, and communication routines, while the 12-bit ADC provides the sensing interface. The 28-pin TSSOP package is useful for densely populated instruments. Firmware designers should use the memory map and interrupt-vector tables in the manufacturer datasheet, particularly when reusing code across related S08EL members.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MC9S08EL16CTL — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MC9S08SL16CTL | MC9S08EL32 | MC9S08EL8 |
|---|---|---|---|---|
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Program Flash | 16 KB | 16 KB | 32 KB | 8 KB |
| Core Architecture | Enhanced HCS08, 8-bit | Enhanced HCS08, 8-bit | Enhanced HCS08, 8-bit | Enhanced HCS08, 8-bit |
Ana Farklılayıcılar
- Integrated LIN slave control with a 40 MHz 8-bit core (karşılaştırma:MC9S08EL16CTJ)
- Balanced memory configuration for embedded firmware and retained parameters (karşılaştırma:MC9S08EL32)
- Direct S08EL continuity for low-cost embedded-control designs (karşılaştırma:MC9S08SL16CTL)
Tasarım Notları
Do not substitute MC9S08EL16CTJ for MC9S08EL16CTL on an existing PCB. The CTJ ordering code uses a 20-pin TSSOP, while the target device uses a 28-pin TSSOP, so the footprints and pin counts differ. Also treat MC9S08SL16CTL as a candidate requiring engineering approval rather than an automatic replacement: compare the complete pin table, peripheral assignments, memory map, and interrupt vectors before changing the BOM.
Use the manufacturer pin-connection table to identify every supply and ground connection in the 28-pin TSSOP. Place local high-frequency bypass capacitors close to the device's supply pins and connect the ground return directly into the ground plane. Do not infer the operating-voltage limit from generic S08-family literature; confirm the MC9S08EL16CTL limits in the manufacturer datasheet before selecting regulators or protection components.
Keep analog input traces away from LIN, switching-supply, and high-current motor paths. Route sensor inputs with short traces, guard them with grounded geometry where appropriate, and terminate unwanted signals at the source. For a LIN node, follow the reference layout and transceiver guidance for the selected MC9S08EL16CTL package to preserve signal integrity and avoid introducing additional bus-side EMI.
Because the manufacturer lists MC9S08EL16CTL as NRND, avoid designing new demand around an assumed long-term production supply. Review the NXP product-change notice, request traceability and remaining inventory information through the Request a Quote form, and evaluate a currently promoted S08 MCU if the new design can tolerate changes in firmware or board layout. For an existing design, freezing the approved package and firmware configuration reduces certification risk.
Uyumluluk Bilgisi
NXP identifies MC9S08EL16CTL as NRND. Exact environmental compliance and automotive qualification for the ordering variant must be confirmed from the manufacturer product page or declarations.