MC9S08QE96CLK - 8-Bit 50MHz 96KB Flash MCU | NXP
MPN: MC9S08QE96CLK ✓ सक्रियMC9S08QE96CLK अवलोकन
An HCS08 microcontroller is an 8-bit embedded processor that combines a central processing unit, Flash memory, RAM, GPIO, timers, serial interfaces, and debugging functions on one integrated circuit. Within the semiconductor hierarchy, it belongs to the microcontroller, embedded processor, and embedded-control IC categories. The S08 architecture is designed for compact control systems that require deterministic peripheral access and low-cost single-chip integration.
The MC9S08QE96CLK provides 96 KB of Flash program storage, 6 KB of SRAM, a maximum clock frequency of 50 MHz, and 28 I/O ports. Its operating supply range is 1.8 V to 3.6 V. A documented 20 MHz HCS08 CPU operating mode and an on-chip background-debug system support controlled development, breakpoint-based troubleshooting, and in-circuit debugging without requiring a separate external debug interface for basic debugging functions.
The S08QE family combines an economical 8-bit core with integrated communication and control peripherals. This makes the MC9S08QE96CLK useful where a larger 16-bit or 32-bit processor would add unnecessary cost, software complexity, or power demand. The 96 KB Flash area supports more application code and data than smaller members of the family while retaining the straightforward programming model of the HCS08 architecture.
Typical uses include industrial motor and machine controllers, building and access-control systems, appliance controllers, sensor-hub products, communications modules, and compact embedded instruments. The 28 available I/O ports can be allocated among digital inputs, outputs, serial functions, and timer-driven interfaces when the selected board design requires parallel control.
When laying out this LQFP device, follow the manufacturer's pin-description table and land-pattern guidance exactly. Keep sensitive signal paths short, provide the required bypass capacitors close to the supply pins, and confirm the exact clock, reset, and debug configuration before programming. The 80-lead footprint also demands careful fan-out routing between the fine-pitch device and the surrounding board.
This product record combines the manufacturer-series identity, memory configuration, clock capability, package details, sourcing information, and engineering-oriented application guidance to support component selection, PCB planning, firmware preparation, and quotation requests from one focused view.
के लिए ड्रॉप-इन विकल्प MC9S08QE96CLK — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंMC9S08QE96CLK Maximum Ratings और Electrical Characteristics
| Product Type | 8-bit HCS08 Flash Microcontroller |
| Manufacturer | NXP Semiconductors |
| Series | S08QE |
| Processor Core | HCS08 8-bit CPU |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 50 MHz |
| Documented CPU Frequency | 20 MHz |
| Flash Program Memory | 96 KB (96K x 8) |
| RAM Memory | 6 KB |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Number of I/O Ports | 28 |
| पैकेज | 80-lead LQFP |
| Package Body Size | 14 mm x 14 mm |
| माउंटिंग प्रकार | Surface Mount |
| Terminal Count | 80 |
| Debug Support | Background debugging system with breakpoint capability |
| Instruction Set | HC08 instruction set with BGND instruction |
MC9S08QE96CLK 14 mm x 14 mm पिन कॉन्फ़िगरेशन गाइड
MC9S08QE96CLK (14 mm x 14 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S08QE96CLK.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MC9S08QE96CLK के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Machine Controller, Building and Access Control, Appliance Control Module, Communications and Sensor Hub, Embedded Instrumentation, Consumer Electronics Control.
Industrial Machine Controller
The MC9S08QE96CLK fits compact machine-control logic that requires 96 KB of Flash, 6 KB of RAM, and 28 I/O ports without the overhead of a 32-bit processor. Its HCS08 core can coordinate limit switches, encoders, relay logic, status indicators, and timing functions while remaining within a 1.8 V to 3.6 V supply environment. The 50 MHz maximum clock rating provides headroom for control-loop and serial-service code, although the selected operating mode must satisfy the required timing margin. A practical design should isolate noisy motors and relays from the controller, provide regulated local supply rails, and include hardware protection independent of firmware.
अनुशंसित
Building and Access Control
The MC9S08QE96CLK is appropriate for access-control readers, door controllers, credential interfaces, and distributed building nodes because it combines 28 I/O ports with 96 KB of Flash for protocol and configuration data. Its 6 KB RAM is sufficient for event buffering, short message handling, and scheduled access logic, while the S08QE platform supports compact embedded firmware. The 80-lead LQFP package provides ample lead count for switches, indicators, bus interfaces, and peripheral control. Designers should use external level shifting where field contacts exceed the MCU logic voltage, and the enclosure should limit electromagnetic interference from locks and relays.
अनुशंसित
Appliance Control Module
The MC9S08QE96CLK supports appliance control boards that must manage user inputs, displays, sensors, and low-power actuators within one compact controller. The 96 KB Flash provides space for state machines, calibration tables, communication protocols, and update logic, while 6 KB of RAM can support buffers and working variables. The 28 I/O ports reduce the need for external logic when allocating panel inputs, indicator outputs, and peripheral control. Its S08 instruction set is well suited to deterministic appliance sequencing without the memory demands of a 32-bit system. A production design should account for motor noise, brownout behavior during compressor or heater startup, and safe output states during firmware faults.
अनुशंसित
Communications and Sensor Hub
The MC9S08QE96CLK can act as the central controller in a low-cost sensor hub or communications node that collects switch, analog-gated, or digital sensor information and presents it through embedded serial protocols. Its 96 KB of Flash can hold protocol stacks, configuration data, and diagnostics, while 6 KB of RAM is adequate for framed data and buffering. The 50 MHz maximum clock rating supports peripheral servicing and background-debug development. Keep radio or high-current interface sections physically separated from the MCU supply network, and follow the manufacturer layout recommendations for bypass capacitance and clock routing to reduce data errors.
अनुशंसित
Embedded Instrumentation
The MC9S08QE96CLK can serve as the control processor in compact instruments, test fixtures, and monitoring modules where an 8-bit architecture is sufficient. The 96 KB Flash area accommodates measurement routines, calibration coefficients, local configuration, and a simple user interface, while 28 I/O ports support status LEDs, front-panel controls, and digital instrument connections. The 1.8 V to 3.6 V supply range is compatible with low-voltage analog and logic sections when the board includes suitable regulators and protection. Designers should separate analog signal-conditioning paths from switching circuitry and verify the final accuracy of every measurement channel rather than attributing instrument precision to the microcontroller alone.
अनुशंसित
Consumer Electronics Control
The MC9S08QE96CLK fits consumer products that need local control, user-input handling, and serial connectivity but do not require a high-performance 32-bit application processor. The 96 KB Flash and 6 KB RAM allow substantial firmware for product-state management, diagnostics, and peripheral coordination, while the 28 I/O ports simplify panel and connector assignments. Its active lifecycle status and established S08QE family provide a practical base for cost-focused designs. Production implementation should include brownout monitoring, ESD protection for external connectors, watchdog-based recovery, and careful partitioning so high-energy loads cannot disrupt the MCU supply rail.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MC9S08QE96CLK — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Package | 80-lead LQFP (14 mm x 14 mm) |
| Brand | NXP Semiconductors |
| Processor Core | 8-bit HCS08 |
| Maximum Clock Frequency | 50 MHz |
| Flash Memory | 96 KB (96K x 8) |
| RAM Memory | 6 KB |
| Supply Voltage Range | 1.8 V to 3.6 V |
| I/O Port Count | 28 |
| Debug Capability | Background debugging system with breakpoint capability |
मुख्य विशेषताएँ
- Substantial Flash capacity within an economical 8-bit controller (बनामMC9S08QE96CLH)
- Higher pin count for parallel control and peripheral allocation (बनामMC9S08QE96CLH)
- Direct compatibility with the NXP S08QE migration ecosystem (बनामMCF51QE128)
डिज़ाइन नोट्स
Construct the 80-lead LQFP footprint from the current NXP package drawing and pin table, including the correct pin-1 orientation, land length, and solder-mask definition. The package key shown on this page uses a generic diagram because the 80-lead LQFP is not represented in the maintained diagram library. Confirm every lead against the manufacturer documentation before releasing Gerber files, and reserve programming or debug access along the relevant package edges.
Plan separate routing for digital supply, ground, and any externally switched load so current transients do not corrupt the controller rail. Place the required bypass capacitors at the associated power pins with the shortest practical ground return. The documented supply range is 1.8 V to 3.6 V, so the regulator setpoint must remain inside that range at every operating point, including motor, relay, or display startup transients.
Route oscillator, reset, and debug signals away from high-current switching nodes and noisy inputs. Use a continuous ground reference beneath signal paths where the board stack-up permits, avoid long loops in sensitive interfaces, and provide controlled return paths for external cables. If the design uses an external crystal or clock source, follow the NXP recommended load and layout requirements rather than substituting an unrestricted clock generator without validation.
Do not treat every 50 MHz listing as a universal operating condition. The documentation identifies a 20 MHz CPU mode, and allowable bus or peripheral frequencies can vary with voltage and temperature. Configure the clock tree from the manufacturer reference, validate startup timing across the full voltage range, and include brownout recovery behavior. Also verify that all 80 pins are assigned in the design tool, including supply, ground, and unused leads.
अनुपालन जानकारी
Compliance declarations were not identified in the technical product information used for this record. Confirm the current declarations and material documentation with NXP for the exact ordering code.