NXP Semiconductors

MC9S08QE96CLK - 8-Bit 50MHz 96KB Flash MCU | NXP

부품 번호: MC9S08QE96CLK ✓ 활성
1.8 V to 3.6 V Vdss 80-lead LQFP Package 50 MHz Speed 96 KB (96K x 8) Memory
MOQ: 1 |

MC9S08QE96CLK 개요

NXP MC9S08QE96CLK is an 8-bit HCS08 microcontroller rated up to 50 MHz, with 96 KB of Flash program memory, 6 KB of RAM, and 28 I/O ports in an 80-lead LQFP package measuring 14 mm by 14 mm. The device belongs to the S08QE family and provides a compact platform for embedded control, industrial automation, consumer equipment, and communication-oriented products.

An HCS08 microcontroller is an 8-bit embedded processor that combines a central processing unit, Flash memory, RAM, GPIO, timers, serial interfaces, and debugging functions on one integrated circuit. Within the semiconductor hierarchy, it belongs to the microcontroller, embedded processor, and embedded-control IC categories. The S08 architecture is designed for compact control systems that require deterministic peripheral access and low-cost single-chip integration.

The MC9S08QE96CLK provides 96 KB of Flash program storage, 6 KB of SRAM, a maximum clock frequency of 50 MHz, and 28 I/O ports. Its operating supply range is 1.8 V to 3.6 V. A documented 20 MHz HCS08 CPU operating mode and an on-chip background-debug system support controlled development, breakpoint-based troubleshooting, and in-circuit debugging without requiring a separate external debug interface for basic debugging functions.

The S08QE family combines an economical 8-bit core with integrated communication and control peripherals. This makes the MC9S08QE96CLK useful where a larger 16-bit or 32-bit processor would add unnecessary cost, software complexity, or power demand. The 96 KB Flash area supports more application code and data than smaller members of the family while retaining the straightforward programming model of the HCS08 architecture.

Typical uses include industrial motor and machine controllers, building and access-control systems, appliance controllers, sensor-hub products, communications modules, and compact embedded instruments. The 28 available I/O ports can be allocated among digital inputs, outputs, serial functions, and timer-driven interfaces when the selected board design requires parallel control.

When laying out this LQFP device, follow the manufacturer's pin-description table and land-pattern guidance exactly. Keep sensitive signal paths short, provide the required bypass capacitors close to the supply pins, and confirm the exact clock, reset, and debug configuration before programming. The 80-lead footprint also demands careful fan-out routing between the fine-pitch device and the surrounding board.

This product record combines the manufacturer-series identity, memory configuration, clock capability, package details, sourcing information, and engineering-oriented application guidance to support component selection, PCB planning, firmware preparation, and quotation requests from one focused view.

드롭인 대체품: MC9S08QE96CLK — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

MC9S08QE96CLK 최대 정격 & 전기적 특성

Product Type 8-bit HCS08 Flash Microcontroller
Manufacturer NXP Semiconductors
Series S08QE
Processor Core HCS08 8-bit CPU
최대 클록 주파수 50 MHz
Documented CPU Frequency 20 MHz
Flash Program Memory 96 KB (96K x 8)
RAM Memory 6 KB
Supply Voltage Range 1.8 V to 3.6 V
Number of I/O Ports 28
패키지 80-lead LQFP
Package Body Size 14 mm x 14 mm
실장 유형 Surface Mount
Terminal Count 80
Debug Support Background debugging system with breakpoint capability
Instruction Set HC08 instruction set with BGND instruction

MC9S08QE96CLK 14 mm x 14 mm 핀 구성 가이드

MC9S08QE96CLK(14 mm x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MC9S08QE96CLK의 14 mm x 14 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MC9S08QE96CLK.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MC9S08QE96CLK 적합 용도: 6 애플리케이션s: Industrial Machine Controller, Building and Access Control, Appliance Control Module, Communications and Sensor Hub, Embedded Instrumentation, Consumer Electronics Control.

🏭

Industrial Machine Controller

The MC9S08QE96CLK fits compact machine-control logic that requires 96 KB of Flash, 6 KB of RAM, and 28 I/O ports without the overhead of a 32-bit processor. Its HCS08 core can coordinate limit switches, encoders, relay logic, status indicators, and timing functions while remaining within a 1.8 V to 3.6 V supply environment. The 50 MHz maximum clock rating provides headroom for control-loop and serial-service code, although the selected operating mode must satisfy the required timing margin. A practical design should isolate noisy motors and relays from the controller, provide regulated local supply rails, and include hardware protection independent of firmware.

🔒

Building and Access Control

The MC9S08QE96CLK is appropriate for access-control readers, door controllers, credential interfaces, and distributed building nodes because it combines 28 I/O ports with 96 KB of Flash for protocol and configuration data. Its 6 KB RAM is sufficient for event buffering, short message handling, and scheduled access logic, while the S08QE platform supports compact embedded firmware. The 80-lead LQFP package provides ample lead count for switches, indicators, bus interfaces, and peripheral control. Designers should use external level shifting where field contacts exceed the MCU logic voltage, and the enclosure should limit electromagnetic interference from locks and relays.

⚡

Appliance Control Module

The MC9S08QE96CLK supports appliance control boards that must manage user inputs, displays, sensors, and low-power actuators within one compact controller. The 96 KB Flash provides space for state machines, calibration tables, communication protocols, and update logic, while 6 KB of RAM can support buffers and working variables. The 28 I/O ports reduce the need for external logic when allocating panel inputs, indicator outputs, and peripheral control. Its S08 instruction set is well suited to deterministic appliance sequencing without the memory demands of a 32-bit system. A production design should account for motor noise, brownout behavior during compressor or heater startup, and safe output states during firmware faults.

🌐

Communications and Sensor Hub

The MC9S08QE96CLK can act as the central controller in a low-cost sensor hub or communications node that collects switch, analog-gated, or digital sensor information and presents it through embedded serial protocols. Its 96 KB of Flash can hold protocol stacks, configuration data, and diagnostics, while 6 KB of RAM is adequate for framed data and buffering. The 50 MHz maximum clock rating supports peripheral servicing and background-debug development. Keep radio or high-current interface sections physically separated from the MCU supply network, and follow the manufacturer layout recommendations for bypass capacitance and clock routing to reduce data errors.

🔧

Embedded Instrumentation

The MC9S08QE96CLK can serve as the control processor in compact instruments, test fixtures, and monitoring modules where an 8-bit architecture is sufficient. The 96 KB Flash area accommodates measurement routines, calibration coefficients, local configuration, and a simple user interface, while 28 I/O ports support status LEDs, front-panel controls, and digital instrument connections. The 1.8 V to 3.6 V supply range is compatible with low-voltage analog and logic sections when the board includes suitable regulators and protection. Designers should separate analog signal-conditioning paths from switching circuitry and verify the final accuracy of every measurement channel rather than attributing instrument precision to the microcontroller alone.

📱

Consumer Electronics Control

The MC9S08QE96CLK fits consumer products that need local control, user-input handling, and serial connectivity but do not require a high-performance 32-bit application processor. The 96 KB Flash and 6 KB RAM allow substantial firmware for product-state management, diagnostics, and peripheral coordination, while the 28 I/O ports simplify panel and connector assignments. Its active lifecycle status and established S08QE family provide a practical base for cost-focused designs. Production implementation should include brownout monitoring, ESD protection for external connectors, watchdog-based recovery, and careful partitioning so high-energy loads cannot disrupt the MCU supply rail.

What is the MC9S08QE96CLK?
The MC9S08QE96CLK is an NXP S08QE-series 8-bit HCS08 Flash microcontroller with 96 KB of program memory, 6 KB of RAM, 28 I/O ports, and a maximum clock frequency of 50 MHz. It is packaged in an 80-lead LQFP measuring 14 mm by 14 mm. According to the NXP product and distributor documentation, it combines an economical 8-bit core with integrated memory and embedded peripherals for compact control applications.
What are the key specifications of MC9S08QE96CLK that engineers should know?
The MC9S08QE96CLK combines 96 KB of Flash, 6 KB of RAM, a 50 MHz maximum clock rating, 28 I/O ports, and a 1.8 V to 3.6 V supply range. The NXP documentation identifies an 8-bit HCS08 processor in an 80-lead LQFP package. These parameters position it for embedded products requiring moderate flash capacity, numerous digital I/O functions, and a compact surface-mount footprint.
Where can I download the MC9S08QE96CLK datasheet PDF?
The MC9S08QE96CLK datasheet can be accessed through the linked technical document page, which reproduces the NXP HCS08 device information. The NXP part documentation is the controlling reference for pin assignments, electrical limits, memory behavior, clocking, and debug connections. Download and archive the current manufacturer document before finalizing PCB routing or writing low-level startup code.
Where can I find the MC9S08QE96CLK pinout?
The MC9S08QE96CLK pinout is found in the pin-description table of the NXP manufacturer datasheet. Use that table to assign all 80 LQFP leads, including power, ground, reset, clock, debug, and multiplexed peripheral signals. The compact product listing does not reproduce a verified lead-by-lead assignment, so use the manufacturer pin table directly when creating the PCB footprint and assigning tracks.
How much Flash and RAM does the MC9S08QE96CLK have?
The MC9S08QE96CLK contains 96 KB of Flash program memory organized as 96K x 8 and 6 KB of SRAM. According to the NXP family documentation, Flash supports in-circuit programming and is intended for executable application code and nonvolatile constants. The 6 KB RAM supports stack depth, working variables, buffers, and real-time control state.
What clock speed does the MC9S08QE96CLK support?
The MC9S08QE96CLK is listed with a maximum clock frequency of 50 MHz, while the device documentation also identifies a 20 MHz HCS08 CPU mode. The maximum system clock must be selected with the correct bus-frequency and operating-mode settings from the manufacturer documentation. Verify clock timing and voltage requirements before treating 50 MHz as valid for every peripheral and temperature condition.
Can the MC9S08QE96CLK be used for industrial control systems?
The MC9S08QE96CLK is suitable for industrial control designs requiring an 8-bit processor, 96 KB of Flash, 6 KB of RAM, and 28 I/O ports. Its 1.8 V to 3.6 V operating range allows integration with low-voltage industrial logic. Final qualification also depends on the required ambient temperature, EMC environment, isolation strategy, and any customer-specific quality requirements.
Where can I buy MC9S08QE96CLK online?
Use the Request a Quote form on this page to request MC9S08QE96CLK pricing, stock, lead time, and order details. The part is identified as an active 80-lead LQFP S08QE microcontroller with 96 KB of Flash and 6 KB of RAM. Providing the target quantity and required packaging information helps the sourcing team return an accurate quotation.
What is the price of the MC9S08QE96CLK?
Current MC9S08QE96CLK pricing is handled through the Request a Quote form on this page. Quote results can depend on order quantity, package distribution format, manufacturing traceability, and current component availability. Submit the required quantity and date-code requirements with the request so procurement receives a commercially actionable response.
What is the lead time for the MC9S08QE96CLK?
The MC9S08QE96CLK lead time depends on current factory and distribution availability, requested quantity, and packaging requirements. The NXP lifecycle listing identifies the device as active, but production scheduling is not represented by a fixed lead-time figure. Request a written quote and delivery commitment through the Request a Quote form on this page.
Is the MC9S08QE96CLK in stock?
MC9S08QE96CLK inventory changes with order size and channel replenishment. The current NXP lifecycle status is active, which supports continued sourcing, but it does not by itself confirm a quantity available for immediate shipment. Use the Request a Quote form on this page to specify quantity, packaging, and delivery requirements and receive the latest availability confirmation.
Is the MC9S08QE96CLK the same as MCF51QE128?
The MC9S08QE96CLK and MCF51QE128 are related but not interchangeable drop-in devices. NXP describes the 32-bit MCF51QE128 as pin-, peripheral-, and tool-compatible with the 8-bit S08QE128 device, not with the 80-lead MC9S08QE96CLK. The processor word size, package leads, memory configuration, clock plan, and software target must all be revalidated before considering a board migration.
When should I choose MC9S08QE96CLK instead of a larger 8-bit MCU?
Choose the MC9S08QE96CLK when a design benefits from 96 KB of Flash, 6 KB of RAM, 28 I/O ports, and the established S08QE tool ecosystem without requiring a larger processor. It is a practical fit for compact controllers with moderate application-code requirements. Select a different MCU when the design needs more RAM, faster peripherals, more communication channels, a different package, or a newer software architecture.
Is the MC9S08QE96CLK suitable for a motor-control or machine-control application?
The MC9S08QE96CLK is suitable for many machine-control tasks because it combines a 50 MHz maximum clock rating, 28 I/O ports, 96 KB of Flash, and 6 KB of RAM. It can host deterministic control logic, coordinate digital sensors, and operate actuators through external drivers. The actual motor type, protection requirements, timing resolution, and safety controls determine whether the device is sufficient.
What can replace the MC9S08QE96CLK?
A verified drop-in replacement for the MC9S08QE96CLK was not identified in the cross-reference material because an 8-bit MCU substitution must match the 80-lead package, complete pinout, clock architecture, memory organization, peripherals, and programming model. Similar-function microcontrollers may require firmware and board changes and therefore are not drop-in replacements. Send the board requirements through the Request a Quote form for a component-level substitution review.
What is the best NXP equivalent for MC9S08QE96CLK?
The best direct NXP equivalent for the MC9S08QE96CLK is the identical ordering code, because a different S08QE variant may change Flash capacity, package dimensions, pin availability, or peripheral configuration. The related MCF51QE128 provides migration flexibility from the S08QE128 platform but changes the processor to 32-bit and uses a different package arrangement. A substitution should therefore begin with a manufacturer pin and memory comparison.
How should the MC9S08QE96CLK PCB be designed?
Use the NXP pin table and package drawing to build the 80-lead LQFP footprint, then route power and ground with low-impedance paths. Place required bypass capacitors close to their associated supply pins, keep oscillator and debug routes short, and avoid switching-current paths beneath sensitive inputs. Review the footprint, assembly clearance, programming access, and exposed test requirements before releasing the board for fabrication.

엔지니어링 참조 데이터: MC9S08QE96CLK — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MC9S08QE96CLK for compact embedded control products that need an established 8-bit S08QE architecture, 96 KB of Flash, 6 KB of RAM, 28 I/O ports, and an 80-lead LQFP footprint. It is particularly useful when code size and I/O availability matter more than 32-bit processing performance. MC9S08QE96CLH may be considered when a smaller 64-lead package is preferred, but it is not a drop-in replacement for the 80-lead board. The MCF51QE128 offers a related NXP migration path for designs transitioning from S08QE128, but its 32-bit architecture and package configuration require board, firmware, and toolchain review. No other substitute should be treated as drop-in without a complete comparison of all 80 pins, clocking, memory, peripherals, voltage, and software compatibility.

대체품과의 비교

파라미터 이 제품
Package 80-lead LQFP (14 mm x 14 mm)
Brand NXP Semiconductors
Processor Core 8-bit HCS08
Maximum Clock Frequency 50 MHz
Flash Memory 96 KB (96K x 8)
RAM Memory 6 KB
Supply Voltage Range 1.8 V to 3.6 V
I/O Port Count 28
Debug Capability Background debugging system with breakpoint capability

주요 차별점

  • Substantial Flash capacity within an economical 8-bit controller (vs MC9S08QE96CLH)
  • Higher pin count for parallel control and peripheral allocation (vs MC9S08QE96CLH)
  • Direct compatibility with the NXP S08QE migration ecosystem (vs MCF51QE128)

설계 노트

Construct the 80-lead LQFP footprint from the current NXP package drawing and pin table, including the correct pin-1 orientation, land length, and solder-mask definition. The package key shown on this page uses a generic diagram because the 80-lead LQFP is not represented in the maintained diagram library. Confirm every lead against the manufacturer documentation before releasing Gerber files, and reserve programming or debug access along the relevant package edges.

Plan separate routing for digital supply, ground, and any externally switched load so current transients do not corrupt the controller rail. Place the required bypass capacitors at the associated power pins with the shortest practical ground return. The documented supply range is 1.8 V to 3.6 V, so the regulator setpoint must remain inside that range at every operating point, including motor, relay, or display startup transients.

Route oscillator, reset, and debug signals away from high-current switching nodes and noisy inputs. Use a continuous ground reference beneath signal paths where the board stack-up permits, avoid long loops in sensitive interfaces, and provide controlled return paths for external cables. If the design uses an external crystal or clock source, follow the NXP recommended load and layout requirements rather than substituting an unrestricted clock generator without validation.

Do not treat every 50 MHz listing as a universal operating condition. The documentation identifies a 20 MHz CPU mode, and allowable bus or peripheral frequencies can vary with voltage and temperature. Configure the clock tree from the manufacturer reference, validate startup timing across the full voltage range, and include brownout recovery behavior. Also verify that all 80 pins are assigned in the design tool, including supply, ground, and unused leads.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance declarations were not identified in the technical product information used for this record. Confirm the current declarations and material documentation with NXP for the exact ordering code.

관련 검색

MC9S08QE96CLK datasheet MC9S08QE96CLK datasheet pdf MC9S08QE96CLK pinout MC9S08QE96CLK equivalent MC9S08QE96CLK replacement MC9S08QE96CLK cross reference MC9S08QE96CLK 80-LQFP MC9S08QE96CLK 50MHz 96KB NXP MC9S08QE96CLK MC9S08QE96CLK price MC9S08QE96CLK stock MC9S08QE96CLK application circuit

관련 부품 & 용어

NXP Semiconductors MC9S08QE96CLK MC9S08QE96CLH MCF51QE128 S08QE HCS08 8-bit microcontroller embedded processor embedded-control IC semiconductor Flash memory 96 KB Flash 6 KB SRAM 28 I/O ports 50 MHz clock background debugging system BGND instruction 80-lead LQFP LQFP package family surface-mount package industrial automation access control appliance control sensor hub embedded instrumentation
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기