अंतिम बार खरीदने की सूचना: MC9S08SH32MTG end-of-life के करीब है। अंतिम ऑर्डर तिथि: हमसे संपर्क करें. उपलब्ध वैकल्पिक पार्ट्स देखें →
NXP Semiconductors

MC9S08SH32MTG - 40MHz 8-Bit 32KB Flash MCU | NXP

MPN: MC9S08SH32MTG ✗ जीवन की समाप्ति
5 V Vdss 16-pin TSSOP Package 40 MHz Speed 32 KB (32K x 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

MC9S08SH32MTG अवलोकन

NXP Semiconductors MC9S08SH32MTG is an 8-bit S08SH microcontroller operating at up to 40 MHz, with 32 KB of Flash memory and up to 16 GPIO pins, housed in a 16-pin TSSOP package. It is designed for 5 V applications and combines serial communications, ADC, timer, and single-wire debug functions in a compact embedded-control device.

An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, and peripherals on one chip. The S08SH family occupies the low-end portion of the broader embedded-control hierarchy: MCU → microcontroller → embedded processor. These devices are appropriate when deterministic control, simple peripheral integration, and low component count matter more than high arithmetic throughput or a large memory map.

The MC9S08SH32MTG provides 32 KB of Flash memory organized as 32K x 8, executes at up to 40 MHz, and includes SCI, SPI, I²C, and analog-to-digital converter capabilities. Its integrated development support includes a single-wire background debug interface, breakpoint capability, an on-chip in-circuit emulation module, two comparators, nine trigger modes, and an eight-deep FIFO for capturing change-of-flow and event-only data.

Its 16-pin TSSOP construction supports compact PCB layouts while exposing up to 16 GPIO pins for digital inputs and outputs. The family is positioned for 5 V systems and is compatible with S08SG devices in pin, tool, and software terms, which can simplify migration planning when the replacement device provides the required memory, peripheral mix, and package configuration.

Typical uses include industrial control panels, motor and relay controllers, keyboard and keypad interfaces, serial bridges, simple sensor acquisition systems, and compact consumer appliances. The ADC and multiple serial interfaces reduce the need for external interface components, while the integrated debug interface supports development and production programming without requiring a separate complex debug subsystem.

Engineers should verify the complete pin assignment, electrical limits, memory map, and peripheral availability against the NXP datasheet before laying out a PCB. Because this exact device is identified as end of life, new production designs should also evaluate the manufacturer's current migration options and confirm long-term sourcing before committing to the MC9S08SH32MTG.

This page combines the NXP product information, family-level technical characteristics, lifecycle status, and practical design guidance. It also highlights where pin-compatible family alternatives can help maintain an existing S08 design while making the end-of-life transition more transparent.

के लिए ड्रॉप-इन विकल्प MC9S08SH32MTG — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC9S08SH32MTG (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Debug Interface.

NXP Semiconductors
Debug Interface: Single-wire BDI
इसके साथ तुलना करें MC9S08SH32MTG →

MC9S08SH32CTG

✅ ड्रॉप-इन
NXP Semiconductors
📦 16-TSSOP
S08 8-bit CISC · 32 KB Flash (32K x 8) · 40 MHz · 2.7 V to 5.5 V · 16-pin TSSOP · Surface Mount · 16 · 8 bit

कीमत के लिए संपर्क करें

डेटाशीट देखें →

S9S08SG32E1CTGR

✅ ड्रॉप-इन
📦 16-TSSOP
Same 8-bit architecture, 32 KB Flash, 40 MHz class, and 16-pin TSSOP footprint; family-specific peripheral and errata differences require review.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MC9S08SH32MTG Maximum Ratings और Electrical Characteristics

Product Type 8-bit microcontroller
Core S08 8-bit core
अधिकतम क्लॉक फ़्रीक्वेंसी 40 MHz
Flash Memory 32 KB (32K x 8)
Programmable I/O Up to 16 GPIO pins
Nominal Supply Voltage 5 V
पैकेज 16-pin TSSOP
Package Code TSSOP
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Automotive
Serial Communication Interfaces SCI, SPI, and I²C
Analog-to-Digital Converter Integrated ADC
Debug Interface Single-wire background debug interface
Breakpoint Capability One breakpoint through background debug plus two more breakpoints in the on-chip debug module
On-Chip Emulation Comparators 2 comparators
ICE Trigger Modes 9 trigger modes
Debug FIFO Depth 8 entries
माउंटिंग प्रकार Surface mount

MC9S08SH32MTG rectangular पिन कॉन्फ़िगरेशन गाइड

MC9S08SH32MTG (rectangular पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

MC9S08SH32MTG के लिए rectangular पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S08SH32MTG.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MC9S08SH32MTG के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control Panel, Motor and Relay Controller, Serial Communication Bridge, Sensor Acquisition Node, Automotive Accessory Controller, Consumer Appliance Controller.

🏭

Industrial Control Panel

The MC9S08SH32MTG fits compact 5 V control panels that read switches, operate indicators, and manage basic actuator signals. Its 40 MHz S08 core executes control logic quickly, while 32 KB of Flash provides room for firmware and parameter tables. Up to 16 GPIO pins simplify direct connections to buttons, relays, and status LEDs. The integrated SCI, SPI, I²C, and ADC reduce the number of external interface components. For an industrial program, verify the exact temperature limits, ESD requirements, and end-of-life supply plan before production release.

🔧

Motor and Relay Controller

The MC9S08SH32MTG can coordinate a small 5 V motor, solenoid, or relay system using its timer functions and up to 16 GPIO pins. The 40 MHz processing rate supports responsive timing, while the ADC can monitor an analog feedback signal when the application requires closed-loop supervision. SCI, SPI, and I²C allow connection to a host controller or sensor network. Keep high-current inductive paths separate from sensitive signal routing, and use transistor drive stages and protection networks rather than driving loads directly from MCU pins.

🌐

Serial Communication Bridge

The MC9S08SH32MTG is suitable for a compact protocol-conversion or supervisory bridge because it combines SCI, SPI, and I²C interfaces with 32 KB of Flash in a 16-pin TSSOP. Firmware can translate data formats, manage command parsing, and exchange status information between a host and peripheral devices. The 40 MHz core provides useful timing headroom, while background debugging helps validate protocol behavior. Check the device-specific peripheral mapping and pin multiplexing in the datasheet because interface functions can depend on package pins and clock configuration.

🧩

Sensor Acquisition Node

The MC9S08SH32MTG can form the center of a small sensor-acquisition node using its integrated ADC, GPIO pins, and serial interfaces. A 40 MHz 8-bit core is appropriate for sampling, filtering, threshold evaluation, and periodic reporting in compact embedded systems, while the 32 KB Flash capacity supports moderate application firmware. I²C accommodates suitable digital sensors, and SCI or SPI supports higher-speed peripherals. Design the analog input path around the datasheet's ADC limits and include suitable filtering, grounding, and calibration procedures for stable measurements.

🚗

Automotive Accessory Controller

The MC9S08SH32MTG's automotive temperature designation and 5 V operation make it a candidate for compact accessory-control modules such as seat, climate, body, or interface controllers. Its 40 MHz core, 32 KB Flash, ADC, and multiple serial interfaces support responsive logic and diagnostics in a 16-pin TSSOP. The integrated debug resources aid validation of field diagnostics. Because the device is end of life, an automotive replacement program must verify temperature range, electrical limits, functional safety assumptions, AEC-Q100 status, and long-term sourcing rather than relying on package similarity alone.

📱

Consumer Appliance Controller

The MC9S08SH32MTG suits compact appliance controllers that coordinate a keypad, indicator, sensor, and communications link. A 40 MHz 8-bit core and 32 KB Flash are adequate for deterministic state machines and user-interface logic, while integrated SCI, SPI, I²C, and ADC reduce external interface count. The 16-pin TSSOP footprint supports dense but manageable layouts. Confirm whether the appliance requires an automotive temperature range, functional-safety qualification, or a current MCU with a longer supply commitment; the end-of-life status makes platform redesign an important alternative.

What are the key specifications of MC9S08SH32MTG that engineers should know?
The MC9S08SH32MTG is an 8-bit S08 microcontroller with a 40 MHz maximum clock, 32 KB of Flash memory, up to 16 GPIO pins, and a 16-pin TSSOP package. It also integrates SCI, SPI, I²C, ADC, timer, and single-wire debug functions. According to the NXP MC9S08SH32/MC9S08SH16 datasheet, the S08SH family targets low-cost 5 V applications and is pin, tool, and software compatible with S08SG.
What is the operating voltage of MC9S08SH32MTG?
The MC9S08SH32MTG is intended for 5 V operation. NXP describes the S08SH family as a low-end option for applications in the 5 V range. The exact minimum and maximum supply-voltage limits, internal regulator details, and operating current should be checked in the electrical-characteristics table of the manufacturer datasheet before finalizing power-supply and decoupling design.
Is MC9S08SH32MTG still active?
No. NXP lists the MC9S08SH32MTG as End of Life on its official product page. Existing designs can still use information from the MC9S08SH32/MC9S08SH16 datasheet, but new production programs should confirm availability and review NXP's discontinuance and replacement information before committing to the device.
Where can I download the MC9S08SH32MTG datasheet PDF?
The official MC9S08SH32MTG datasheet PDF is available through NXP at the MC9S08SH32 data-sheet link. It covers the S08SH32 MCU and the related S08SH16 device, including architecture, memory, peripherals, debug support, electrical characteristics, and package information. Use the manufacturer's PDF rather than a secondary mirror when designing or performing a formal review.
Where can I find the MC9S08SH32MTG pinout?
The MC9S08SH32MTG pinout is published in the MC9S08SH32/MC9S08SH16 NXP datasheet. The device uses a 16-pin TSSOP package, so PCB tracks and external-component connections should be assigned from the package pin-description and connection tables rather than inferred from generic 16-pin diagrams. Use the device-specific tables to identify power, ground, reset, debug, oscillator, GPIO, and peripheral functions.
What can replace MC9S08SH32MTG?
The closest documented replacement path is an S08SG-family device because NXP states that S08SH is pin, tool, and software compatible with S08SG. A valid replacement must still match the 16-pin TSSOP footprint, 32 KB Flash requirement, 5 V system requirements, peripheral set, temperature grade, and pin functions. MC9S08SH32CTG is a same-package family option, while S9S08SG32E1CTGR is another 16-pin TSSOP candidate shown in the comparison results.
What is the best NXP equivalent for MC9S08SH32MTG?
An S08SG-family MCU is the leading NXP migration path because the manufacturer states that S08SH is pin, tool, and software compatible with S08SG. For MC9S08SH32MTG, engineers should prioritize a 16-pin TSSOP device with 32 KB Flash and compatible SCI, SPI, I²C, ADC, timer, and debug functions. NXP's MC9S08SH32CTG product page and the S9S08SG32E1CTGR comparison record are useful starting points for that qualification.
Is MC9S08SH32MTG the same as S9S08SG32E1CTGR?
No. The MC9S08SH32MTG belongs to the S08SH family and is identified by NXP as end of life, while the S9S08SG32E1CTGR is an S08SG-family device. Both are described as 8-bit, 40 MHz-class MCUs with 32 KB Flash in 16-pin TSSOP packages, but family-specific peripherals, errata, temperature options, and device-specific pin functions must be reviewed before treating them as interchangeable.
When should I choose MC9S08SH32MTG over an S08SG alternative?
Choose the MC9S08SH32MTG only when maintaining an existing, already validated S08SH design and its documented behavior is more important than starting a new lifecycle-supported program. For a new design, an S08SG candidate is generally easier to justify because NXP identifies S08SH as pin, tool, and software compatible with S08SG. Migration still requires checking package pins, memory, peripheral functions, timing, and qualification requirements.
Is MC9S08SH32MTG suitable for industrial control applications?
The MC9S08SH32MTG can suit compact 5 V industrial-control tasks that need an 8-bit controller, 32 KB Flash, up to 16 GPIO pins, ADC conversion, and serial interfaces. Its integrated SCI, SPI, I²C, ADC, timers, and background debug functions can reduce external component count. The automotive temperature designation shown for this orderable part supports harsh-temperature use, but the end-of-life status requires an explicit supply and migration assessment.
What is the lead time for MC9S08SH32MTG?
The current lead time for MC9S08SH32MTG is not stated on the NXP product page, so it must be confirmed through the Request a Quote form on this page. Because NXP identifies the device as end of life, include the required quantity, manufacturing schedule, packaging preference, and date code requirements in the request. Verify each quote against the authorized supply channel and any applicable NXP discontinuance notice.
Is MC9S08SH32MTG in stock?
Inventory status can change quickly for an end-of-life MCU, so current availability should be requested through the Request a Quote form on this page. The manufacturer product page confirms the end-of-life condition but does not provide a stable, reusable stock commitment. For production planning, request lot traceability, date-code information, quantity availability, and the proposed delivery schedule in writing.
Where can I buy MC9S08SH32MTG?
Use the Request a Quote form on this page to request MC9S08SH32MTG availability, including quantity, date code, and delivery requirements. NXP identifies the exact part as end of life, while distributor search results show marketplace and catalog activity. A purchase request should therefore confirm genuine device traceability and obtain a current allocation before placing a production order.
MC9S08SH32MTG vs MC9S08SH32CTG - which is better?
MC9S08SH32MTG is the automotive-temperature, 16-pin TSSOP ordering configuration, while MC9S08SH32CTG is identified as another 32 KB S08SH-family ordering option. The decisive difference is the exact temperature grade and associated qualification conditions, not the 32 KB Flash capacity. Compare the ordering-information table, operating-temperature limits, and qualification documents for both devices before substitution.
Does MC9S08SH32MTG support single-wire debugging?
Yes. The MC9S08SH32MTG includes a single-wire background debug interface with breakpoint capability, while its on-chip in-circuit emulation module adds two comparators, nine trigger modes, and an eight-deep FIFO for change-of-flow and event-only data. According to the NXP MC9S08SH32/MC9S08SH16 datasheet, these resources support programming, breakpoint control, and in-circuit debug functions.

के लिए इंजीनियरिंग संदर्भ डेटा MC9S08SH32MTG — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MC9S08SH32MTG when maintaining an existing S08SH design is mandatory and its 40 MHz S08 core, 32 KB Flash, 16-pin TSSOP package, and integrated SCI, SPI, I²C, ADC, and debug functions already match the product. It is particularly relevant where the automotive-temperature ordering configuration has been qualified. Choose MC9S08SH32CTG when its ordering temperature conditions meet the product requirements and it offers a practical same-family sourcing path. Evaluate S9S08SG32E1CTGR when NXP's S08SG compatibility supports a broader migration, but complete a pin, peripheral, timing, errata, and qualification review because matching flash size and package alone do not prove equivalence. For entirely new products, evaluate a currently supported MCU platform because the target part is end of life and long-term continuity cannot be assumed.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MC9S08SH32CTG S9S08SG32E1CTGR
Package 16-TSSOP 16-TSSOP 16-TSSOP
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Architecture 8-bit S08 8-bit S08SH 8-bit HCS08 S08SG
Maximum Clock Frequency 40 MHz 40 MHz 40 MHz
Flash Memory 32 KB 32 KB 32 KB
Supply Class 5 V MCU 5 V MCU 3.3 V/5 V

मुख्य विशेषताएँ

  • Maintains the exact S08SH function set (बनामS9S08SG32E1CTGR)
  • Automotive-temperature ordering configuration (बनामMC9S08SH32CTG)
  • Direct S08SH firmware continuity (बनामMC9S08SG32E1CTG)

डिज़ाइन नोट्स

Do not treat family compatibility as automatic device equivalence. NXP states that S08SH is pin, tool, and software compatible with S08SG, but the MC9S08SH32MTG still requires review of its device-specific pin functions, reset behavior, oscillator options, peripheral availability, memory organization, electrical limits, and errata. Preserve the original PCB only after the replacement's complete connection and timing tables have been checked.

Place decoupling and support components close to their associated VDD and ground pins, and keep analog ADC inputs away from switching nodes and communication edges. A compact 16-pin TSSOP still needs a deliberate grounding strategy: provide an uninterrupted ground path, minimize return-current loops, and isolate clock, debug-trace, and serial-interface routing from sensitive analog inputs. Verify pad dimensions against the latest package drawing rather than relying only on the generic TSSOP name.

Design the 5 V supply for the MCU's worst-case load, startup behavior, and peripheral sharing rather than a nominal-current estimate. Follow the datasheet's recommended capacitor types and placement rules, and account for voltage tolerance, ripple, and sequencing on the board. Estimated: the MCU's average supply power equals 5 V multiplied by the measured average supply current; calculate the thermal design from the actual board input, output voltage, and highest ambient temperature.

Use the single-wire background-debug interface only with the documented signal integrity and clocking requirements. Keep the debug connection accessible, provide a defined reset state, and avoid long unprotected debug traces where noise could cause unintended breakpoints or programming activity. For systems with nearby switching regulators or motor drivers, separate quiet analog and digital return paths and validate the complete board with an oscilloscope before production.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The product listing identifies an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. Verify the relevant declarations and qualification documents before production use.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC9S08SH32MTG datasheet MC9S08SH32MTG pinout MC9S08SH32MTG datasheet pdf MC9S08SH32MTG equivalent MC9S08SH32MTG replacement MC9S08SH32MTG cross reference MC9S08SH32MTG vs S9S08SG32E1CTGR MC9S08SH32MTG footprint MC9S08SH32MTG price MC9S08SH32MTG stock NXP MC9S08SH32MTG MC9S08SH32 16-TSSOP pinout MC9S08SH32 5V 32KB application

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors MC9S08SH32MTG MC9S08SH32CTG S9S08SG32E1CTGR S08SH S08SG 8-bit microcontroller embedded processor semiconductor 40 MHz S08 core 32 KB Flash 16-pin TSSOP TSSOP package family surface mount SCI SPI I²C analog-to-digital converter single-wire background debug in-circuit emulation GPIO industrial control automotive electronics end-of-life status
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें