MC9S08SH32MTG - 40MHz 8-Bit 32KB Flash MCU | NXP
MPN: MC9S08SH32MTG ✗ Cuối đờiMC9S08SH32MTG Tóm tắt
An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, and peripherals on one chip. The S08SH family occupies the low-end portion of the broader embedded-control hierarchy: MCU → microcontroller → embedded processor. These devices are appropriate when deterministic control, simple peripheral integration, and low component count matter more than high arithmetic throughput or a large memory map.
The MC9S08SH32MTG provides 32 KB of Flash memory organized as 32K x 8, executes at up to 40 MHz, and includes SCI, SPI, I²C, and analog-to-digital converter capabilities. Its integrated development support includes a single-wire background debug interface, breakpoint capability, an on-chip in-circuit emulation module, two comparators, nine trigger modes, and an eight-deep FIFO for capturing change-of-flow and event-only data.
Its 16-pin TSSOP construction supports compact PCB layouts while exposing up to 16 GPIO pins for digital inputs and outputs. The family is positioned for 5 V systems and is compatible with S08SG devices in pin, tool, and software terms, which can simplify migration planning when the replacement device provides the required memory, peripheral mix, and package configuration.
Typical uses include industrial control panels, motor and relay controllers, keyboard and keypad interfaces, serial bridges, simple sensor acquisition systems, and compact consumer appliances. The ADC and multiple serial interfaces reduce the need for external interface components, while the integrated debug interface supports development and production programming without requiring a separate complex debug subsystem.
Engineers should verify the complete pin assignment, electrical limits, memory map, and peripheral availability against the NXP datasheet before laying out a PCB. Because this exact device is identified as end of life, new production designs should also evaluate the manufacturer's current migration options and confirm long-term sourcing before committing to the MC9S08SH32MTG.
This page combines the NXP product information, family-level technical characteristics, lifecycle status, and practical design guidance. It also highlights where pin-compatible family alternatives can help maintain an existing S08 design while making the end-of-life transition more transparent.
Bộ thay thế dễ dàng lắp đặt cho MC9S08SH32MTG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S08SH32MTG (cùng hình factor và footprint) — khác nhau ở Debug Interface.
MC9S08SH32CTG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S9S08SG32E1CTGR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC9S08SH32MTG Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit microcontroller |
| Core | S08 8-bit core |
| Tần số xung maksimum | 40 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Programmable I/O | Up to 16 GPIO pins |
| Nominal Supply Voltage | 5 V |
| Hộp | 16-pin TSSOP |
| Package Code | TSSOP |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Automotive |
| Serial Communication Interfaces | SCI, SPI, and I²C |
| Analog-to-Digital Converter | Integrated ADC |
| Debug Interface | Single-wire background debug interface |
| Breakpoint Capability | One breakpoint through background debug plus two more breakpoints in the on-chip debug module |
| On-Chip Emulation Comparators | 2 comparators |
| ICE Trigger Modes | 9 trigger modes |
| Debug FIFO Depth | 8 entries |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân MC9S08SH32MTG rectangular
Cấu hình chân cho MC9S08SH32MTG (rectangular gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC9S08SH32MTG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC9S08SH32MTG phù hợp cho 6 Áp dụngs: Industrial Control Panel, Motor and Relay Controller, Serial Communication Bridge, Sensor Acquisition Node, Automotive Accessory Controller, Consumer Appliance Controller.
Industrial Control Panel
The MC9S08SH32MTG fits compact 5 V control panels that read switches, operate indicators, and manage basic actuator signals. Its 40 MHz S08 core executes control logic quickly, while 32 KB of Flash provides room for firmware and parameter tables. Up to 16 GPIO pins simplify direct connections to buttons, relays, and status LEDs. The integrated SCI, SPI, I²C, and ADC reduce the number of external interface components. For an industrial program, verify the exact temperature limits, ESD requirements, and end-of-life supply plan before production release.
Được đề xuất
Motor and Relay Controller
The MC9S08SH32MTG can coordinate a small 5 V motor, solenoid, or relay system using its timer functions and up to 16 GPIO pins. The 40 MHz processing rate supports responsive timing, while the ADC can monitor an analog feedback signal when the application requires closed-loop supervision. SCI, SPI, and I²C allow connection to a host controller or sensor network. Keep high-current inductive paths separate from sensitive signal routing, and use transistor drive stages and protection networks rather than driving loads directly from MCU pins.
Được đề xuất
Serial Communication Bridge
The MC9S08SH32MTG is suitable for a compact protocol-conversion or supervisory bridge because it combines SCI, SPI, and I²C interfaces with 32 KB of Flash in a 16-pin TSSOP. Firmware can translate data formats, manage command parsing, and exchange status information between a host and peripheral devices. The 40 MHz core provides useful timing headroom, while background debugging helps validate protocol behavior. Check the device-specific peripheral mapping and pin multiplexing in the datasheet because interface functions can depend on package pins and clock configuration.
Được đề xuất
Sensor Acquisition Node
The MC9S08SH32MTG can form the center of a small sensor-acquisition node using its integrated ADC, GPIO pins, and serial interfaces. A 40 MHz 8-bit core is appropriate for sampling, filtering, threshold evaluation, and periodic reporting in compact embedded systems, while the 32 KB Flash capacity supports moderate application firmware. I²C accommodates suitable digital sensors, and SCI or SPI supports higher-speed peripherals. Design the analog input path around the datasheet's ADC limits and include suitable filtering, grounding, and calibration procedures for stable measurements.
Được đề xuất
Automotive Accessory Controller
The MC9S08SH32MTG's automotive temperature designation and 5 V operation make it a candidate for compact accessory-control modules such as seat, climate, body, or interface controllers. Its 40 MHz core, 32 KB Flash, ADC, and multiple serial interfaces support responsive logic and diagnostics in a 16-pin TSSOP. The integrated debug resources aid validation of field diagnostics. Because the device is end of life, an automotive replacement program must verify temperature range, electrical limits, functional safety assumptions, AEC-Q100 status, and long-term sourcing rather than relying on package similarity alone.
Được đề xuất
Consumer Appliance Controller
The MC9S08SH32MTG suits compact appliance controllers that coordinate a keypad, indicator, sensor, and communications link. A 40 MHz 8-bit core and 32 KB Flash are adequate for deterministic state machines and user-interface logic, while integrated SCI, SPI, I²C, and ADC reduce external interface count. The 16-pin TSSOP footprint supports dense but manageable layouts. Confirm whether the appliance requires an automotive temperature range, functional-safety qualification, or a current MCU with a longer supply commitment; the end-of-life status makes platform redesign an important alternative.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC9S08SH32MTG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC9S08SH32CTG | S9S08SG32E1CTGR |
|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Architecture | 8-bit S08 | 8-bit S08SH | 8-bit HCS08 S08SG |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB |
| Supply Class | 5 V MCU | 5 V MCU | 3.3 V/5 V |
Bảo phân biệt quan trọng
- Maintains the exact S08SH function set (vsS9S08SG32E1CTGR)
- Automotive-temperature ordering configuration (vsMC9S08SH32CTG)
- Direct S08SH firmware continuity (vsMC9S08SG32E1CTG)
Ghi chú thiết kế
Do not treat family compatibility as automatic device equivalence. NXP states that S08SH is pin, tool, and software compatible with S08SG, but the MC9S08SH32MTG still requires review of its device-specific pin functions, reset behavior, oscillator options, peripheral availability, memory organization, electrical limits, and errata. Preserve the original PCB only after the replacement's complete connection and timing tables have been checked.
Place decoupling and support components close to their associated VDD and ground pins, and keep analog ADC inputs away from switching nodes and communication edges. A compact 16-pin TSSOP still needs a deliberate grounding strategy: provide an uninterrupted ground path, minimize return-current loops, and isolate clock, debug-trace, and serial-interface routing from sensitive analog inputs. Verify pad dimensions against the latest package drawing rather than relying only on the generic TSSOP name.
Design the 5 V supply for the MCU's worst-case load, startup behavior, and peripheral sharing rather than a nominal-current estimate. Follow the datasheet's recommended capacitor types and placement rules, and account for voltage tolerance, ripple, and sequencing on the board. Estimated: the MCU's average supply power equals 5 V multiplied by the measured average supply current; calculate the thermal design from the actual board input, output voltage, and highest ambient temperature.
Use the single-wire background-debug interface only with the documented signal integrity and clocking requirements. Keep the debug connection accessible, provide a defined reset state, and avoid long unprotected debug traces where noise could cause unintended breakpoints or programming activity. For systems with nearby switching regulators or motor drivers, separate quiet analog and digital return paths and validate the complete board with an oscilloscope before production.
Thông tin tuân thủ
The product listing identifies an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. Verify the relevant declarations and qualification documents before production use.