MC9S12C96CFAE - 16-Bit 25MHz 96KB Flash MCU | NXP
MPN: MC9S12C96CFAE ✗ जीवन की समाप्तिMC9S12C96CFAE अवलोकन
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic into one device. The HCS12 architecture belongs to the broader embedded-controller and embedded-microcontroller hierarchy. It is intended for compact embedded control systems where deterministic control, serial communication, timing, and analog signal handling must be combined in a low-power integrated circuit.
The MC9S12C96CFAE provides 96 KB of flash for firmware and 16-bit processing through the HCS12 core. Its 25 MHz maximum clock rate supports interrupt-driven control, communication protocol handling, and state-machine-based automation. The 48-LQFP package exposes more I/O than smaller controller packages while retaining a standard surface-mount form suitable for industrial control boards and production reflow.
NXP identifies this device as part of the flash-based S12C family designed for general-purpose industrial and automotive network applications. Its phase-lock loop supports derived internal clocking, while the internal regulator decouples the MCU core supply from the external operating range. Because the 48-pin package provides a comparatively dense pin count, careful signal partitioning is essential when assigning communication, timing, debug, and control functions.
Typical uses include industrial sensor controllers, automotive body and network electronics, motor-control supervisory circuits, serial gateway equipment, and compact embedded automation modules. The 96 KB flash capacity is useful for moderate firmware footprints, while the 16-bit HCS12 instruction set and peripheral integration reduce the need for separate logic devices in control-oriented products.
PCB implementation should preserve the pin assignments and decoupling recommendations in the manufacturer datasheet. Place the supply capacitors adjacent to the relevant power pins, route oscillator and reset signals away from high-current switching nodes, and assign unused pins according to the package guidance. Firmware and board revisions should also be checked against the applicable errata before production release.
This product page combines the manufacturer overview, distributor specifications, lifecycle information, package details, and engineering-oriented selection guidance. It also distinguishes true pin-compatible substitution candidates from broader functional comparisons, helping designers assess whether a second source can be used without changing the 48-LQFP board footprint.
के लिए ड्रॉप-इन विकल्प MC9S12C96CFAE — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC9S12C96CFAE (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Data Bus Width, Flash Memory.
MC9S12GC96MFAE
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MC9S12C96CFAE Maximum Ratings और Electrical Characteristics
| Product Type | 16-bit HCS12 flash microcontroller |
| Processor Core | HCS12 |
| Processor Series | S12C |
| डेटा बस चौड़ाई | 16 bit |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 25 MHz |
| Flash Memory | 96 KB |
| Flash Organization | 96K x 8 |
| External Supply Voltage Range | 2.97 V to 5.5 V |
| Internal Supply Architecture | On-chip bandgap-based voltage regulator |
| Clocking | On-chip phase-lock loop |
| पैकेज | 48-LQFP |
| Package Body Size | 7 mm x 7 mm |
| पिन काउंट | 48 pins |
| Terminal Form | Gull wing |
| माउंटिंग प्रकार | Surface mount |
| Temperature Grade | Industrial |
MC9S12C96CFAE 7 mm x 7 mm पिन कॉन्फ़िगरेशन गाइड
MC9S12C96CFAE (7 mm x 7 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S12C96CFAE.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MC9S12C96CFAE के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor and Control Hub, Automotive Network Interface, Motor Control Supervisor, Serial Gateway Equipment, Embedded Automation Module, Test and Measurement Instrument.
Industrial Sensor and Control Hub
The MC9S12C96CFAE fits an industrial sensor hub that combines several input channels, local decision logic, and serial communications in one controller. Its 16-bit HCS12 architecture operates at up to 25 MHz, providing enough timing margin for interrupt-driven sampling, protocol state machines, and supervisory control. The 96 KB flash stores application firmware, calibration tables, and configuration data without requiring an external program-memory device. In an industrial design, the 48-LQFP package simplifies access to external sensors and communication transceivers while retaining a compact surface-mount footprint. Designers should allocate pins according to the manufacturer pin table, isolate sensitive analog routing from switching nodes, and verify the complete peripheral configuration in the datasheet before finalizing the board.
अनुशंसित
Automotive Network Interface
The MC9S12C96CFAE can serve as a local controller in an automotive network node where firmware must handle communication frames, diagnostic logic, and distributed I/O. Its HCS12 core provides 16-bit processing at up to 25 MHz, while 96 KB of embedded flash supports a self-contained network protocol stack and application logic. The 48-LQFP package gives a board designer 48 terminals for transceiver interfaces, sensors, and control signals without moving to a large BGA footprint. Automotive deployment still requires confirmation of the exact variant's temperature grade, AEC-Q100 status, quality documentation, and lifecycle plan. Firmware should also include fault handling and communication timeout behavior appropriate for vehicle-network applications.
अनुशंसित
Motor Control Supervisor
The MC9S12C96CFAE is appropriate for supervisory and sequencing functions around a motor-control subsystem, such as command decoding, limit monitoring, fault capture, and protection coordination. A 25 MHz HCS12 core can execute time-sensitive control tasks while the 96 KB flash holds the supervisory firmware and state logic. Its 48-LQFP package permits direct connection to position sensors, gate-driver interfaces, and external status inputs. The MCU should not be assumed to replace a dedicated motor-control IC; instead, it can complement that device by managing a higher-level state machine and safety checks. Validate timing, electrical limits, and watchdog behavior against the motor system's worst-case operating conditions before deployment.
अनुशंसित
Serial Gateway Equipment
The MC9S12C96CFAE can act as the protocol-conversion brain in a compact serial gateway that translates between industrial communication interfaces. Its 16-bit architecture supports efficient handling of byte-oriented and framed messages, while 25 MHz operation provides capacity for interrupt-driven receive and transmit routines. The 96 KB flash is suitable for firmware, protocol tables, diagnostics, and configuration storage. In a gateway implementation, the 48-LQFP package offers enough pin access for multiple serial channels, logic-level conversion, status indication, and service interfaces. Engineers should determine the supported serial peripherals and pin multiplexing from the manufacturer documentation, because only the package, core, clock, and memory characteristics are established for the selected part.
अनुशंसित
Embedded Automation Module
The MC9S12C96CFAE suits a compact automation module that must run local logic while exchanging data with a higher-level controller. Its embedded 96 KB flash allows firmware and configuration to reside on the module, and the 25 MHz HCS12 core can handle sequencing, alarms, and communication routines without a separate host processor. The 48-LQFP footprint supports automated PCB assembly and provides a reasonable balance between component size and I/O availability. Product designers should use the manufacturer's pin-assignment table to plan communication, digital I/O, reset, and clock connections, and should reserve test points for programming and diagnostics. Firmware must also accommodate the NRND lifecycle status through a controlled procurement and change-management plan.
अनुशंसित
Test and Measurement Instrument
The MC9S12C96CFAE can control a compact test or measurement instrument when the product needs deterministic sequencing, front-panel logic, data logging, and communications in one embedded platform. The 16-bit HCS12 core handles instrument commands at up to 25 MHz, and 96 KB of flash can retain firmware, test sequences, and calibration information. Its 48-LQFP package offers sufficient external connectivity for sensors, displays, measurement front ends, and service interfaces. Product development should confirm the exact ADC, timer, and communication resources in the manufacturer datasheet before assigning precision measurement functions. Good practice includes separate analog and digital layout regions, local supply decoupling, defined reset behavior, and firmware revision tracking for calibration and traceability.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MC9S12C96CFAE — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MC9S12GC96MFAE |
|---|---|---|
| Package | 48-LQFP, 7 mm x 7 mm | 48-LQFP |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 96 KB | 96 KB |
| Programmable Storage Capacity | 96 KB flash | 96 KB flash |
मुख्य विशेषताएँ
- Established 25 MHz HCS12 control platform (बनामMC9S12GC96MFAE)
- Exact 96 KB flash allocation (बनामMC9S12GC96MFAE)
- Documented 48-LQFP footprint (बनामMC9S12GC96MFAE)
डिज़ाइन नोट्स
Use the NXP package drawing and pin-description table as the authority for all 48-LQFP assignments. Place the required input and internal-regulator decoupling capacitors directly beside their associated power pins, using the shortest and lowest-inductance return paths practical. Keep oscillator, reset, and programming signals away from high-current switching-node traces, and route external interfaces according to the sensitivity of the signals they carry.
The supported external supply range is 2.97 V to 5.5 V, so the power architecture must remain within that range during startup, shutdown, and transients. Because the MCU uses an on-chip bandgap-based regulator for its internal digital supply, board-level decoupling should satisfy the manufacturer layout requirements rather than assuming an external regulator is always necessary. Validate brownout, reset, and power-sequencing behavior under the worst load and temperature conditions.
Do not treat a similar HCS12 part as a true drop-in replacement solely because both use a 48-LQFP package. Confirm pin names, alternate functions, clock limits, memory organization, peripheral availability, electrical characteristics, and software errata for every substitution. For an existing MC9S12C96CFAE design, preserve the approved firmware configuration and review any applicable errata before releasing a new hardware revision.
The 48-pin footprint leaves little spare routing area, so establish a pin-assignment plan before schematic capture. Partition communications, timing-critical signals, general I/O, power, ground, and programming functions to reduce simultaneous-switching noise. Follow the manufacturer recommendations for exposed or perimeter pads, solderable lands, and board-outline geometry, and inspect assembled boards for bridging on the fine-pitch gull-wing terminals.
अनुपालन जानकारी
NXP identifies the S12C family for industrial and automotive network applications, but the product listing does not establish the exact orderable variant's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes in the manufacturer environmental and quality documentation before release.