MC9S12C96CFAE - 16-Bit 25MHz 96KB Flash MCU | NXP
MPN: MC9S12C96CFAE ✗ Tapus ng BuhayMC9S12C96CFAE Ulas
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic into one device. The HCS12 architecture belongs to the broader embedded-controller and embedded-microcontroller hierarchy. It is intended for compact embedded control systems where deterministic control, serial communication, timing, and analog signal handling must be combined in a low-power integrated circuit.
The MC9S12C96CFAE provides 96 KB of flash for firmware and 16-bit processing through the HCS12 core. Its 25 MHz maximum clock rate supports interrupt-driven control, communication protocol handling, and state-machine-based automation. The 48-LQFP package exposes more I/O than smaller controller packages while retaining a standard surface-mount form suitable for industrial control boards and production reflow.
NXP identifies this device as part of the flash-based S12C family designed for general-purpose industrial and automotive network applications. Its phase-lock loop supports derived internal clocking, while the internal regulator decouples the MCU core supply from the external operating range. Because the 48-pin package provides a comparatively dense pin count, careful signal partitioning is essential when assigning communication, timing, debug, and control functions.
Typical uses include industrial sensor controllers, automotive body and network electronics, motor-control supervisory circuits, serial gateway equipment, and compact embedded automation modules. The 96 KB flash capacity is useful for moderate firmware footprints, while the 16-bit HCS12 instruction set and peripheral integration reduce the need for separate logic devices in control-oriented products.
PCB implementation should preserve the pin assignments and decoupling recommendations in the manufacturer datasheet. Place the supply capacitors adjacent to the relevant power pins, route oscillator and reset signals away from high-current switching nodes, and assign unused pins according to the package guidance. Firmware and board revisions should also be checked against the applicable errata before production release.
This product page combines the manufacturer overview, distributor specifications, lifecycle information, package details, and engineering-oriented selection guidance. It also distinguishes true pin-compatible substitution candidates from broader functional comparisons, helping designers assess whether a second source can be used without changing the 48-LQFP board footprint.
Mga alternatibo na pwedeng ilagay na MC9S12C96CFAE — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MC9S12C96CFAE (parehas na form factor at footprint) — pagkakaiba sa Package, Data Bus Width, Flash Memory.
MC9S12GC96MFAE
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MC9S12C96CFAE Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit HCS12 flash microcontroller |
| Processor Core | HCS12 |
| Processor Series | S12C |
| Width ng Data Bus | 16 bit |
| Maksimum na Taktiko ng Oras | 25 MHz |
| Flash Memory | 96 KB |
| Flash Organization | 96K x 8 |
| External Supply Voltage Range | 2.97 V to 5.5 V |
| Internal Supply Architecture | On-chip bandgap-based voltage regulator |
| Clocking | On-chip phase-lock loop |
| Packhaging | 48-LQFP |
| Package Body Size | 7 mm x 7 mm |
| Bilang ng Pin | 48 pins |
| Terminal Form | Gull wing |
| Uri ng Pagpapasok | Surface mount |
| Temperature Grade | Industrial |
Gabay sa Pin Configuration ng MC9S12C96CFAE 7 mm x 7 mm
Pin configuration para sa MC9S12C96CFAE (7 mm x 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MC9S12C96CFAE.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MC9S12C96CFAE ay nararapat para sa 6 aplikasyons: Industrial Sensor and Control Hub, Automotive Network Interface, Motor Control Supervisor, Serial Gateway Equipment, Embedded Automation Module, Test and Measurement Instrument.
Industrial Sensor and Control Hub
The MC9S12C96CFAE fits an industrial sensor hub that combines several input channels, local decision logic, and serial communications in one controller. Its 16-bit HCS12 architecture operates at up to 25 MHz, providing enough timing margin for interrupt-driven sampling, protocol state machines, and supervisory control. The 96 KB flash stores application firmware, calibration tables, and configuration data without requiring an external program-memory device. In an industrial design, the 48-LQFP package simplifies access to external sensors and communication transceivers while retaining a compact surface-mount footprint. Designers should allocate pins according to the manufacturer pin table, isolate sensitive analog routing from switching nodes, and verify the complete peripheral configuration in the datasheet before finalizing the board.
Inirekomenda
Automotive Network Interface
The MC9S12C96CFAE can serve as a local controller in an automotive network node where firmware must handle communication frames, diagnostic logic, and distributed I/O. Its HCS12 core provides 16-bit processing at up to 25 MHz, while 96 KB of embedded flash supports a self-contained network protocol stack and application logic. The 48-LQFP package gives a board designer 48 terminals for transceiver interfaces, sensors, and control signals without moving to a large BGA footprint. Automotive deployment still requires confirmation of the exact variant's temperature grade, AEC-Q100 status, quality documentation, and lifecycle plan. Firmware should also include fault handling and communication timeout behavior appropriate for vehicle-network applications.
Inirekomenda
Motor Control Supervisor
The MC9S12C96CFAE is appropriate for supervisory and sequencing functions around a motor-control subsystem, such as command decoding, limit monitoring, fault capture, and protection coordination. A 25 MHz HCS12 core can execute time-sensitive control tasks while the 96 KB flash holds the supervisory firmware and state logic. Its 48-LQFP package permits direct connection to position sensors, gate-driver interfaces, and external status inputs. The MCU should not be assumed to replace a dedicated motor-control IC; instead, it can complement that device by managing a higher-level state machine and safety checks. Validate timing, electrical limits, and watchdog behavior against the motor system's worst-case operating conditions before deployment.
Inirekomenda
Serial Gateway Equipment
The MC9S12C96CFAE can act as the protocol-conversion brain in a compact serial gateway that translates between industrial communication interfaces. Its 16-bit architecture supports efficient handling of byte-oriented and framed messages, while 25 MHz operation provides capacity for interrupt-driven receive and transmit routines. The 96 KB flash is suitable for firmware, protocol tables, diagnostics, and configuration storage. In a gateway implementation, the 48-LQFP package offers enough pin access for multiple serial channels, logic-level conversion, status indication, and service interfaces. Engineers should determine the supported serial peripherals and pin multiplexing from the manufacturer documentation, because only the package, core, clock, and memory characteristics are established for the selected part.
Inirekomenda
Embedded Automation Module
The MC9S12C96CFAE suits a compact automation module that must run local logic while exchanging data with a higher-level controller. Its embedded 96 KB flash allows firmware and configuration to reside on the module, and the 25 MHz HCS12 core can handle sequencing, alarms, and communication routines without a separate host processor. The 48-LQFP footprint supports automated PCB assembly and provides a reasonable balance between component size and I/O availability. Product designers should use the manufacturer's pin-assignment table to plan communication, digital I/O, reset, and clock connections, and should reserve test points for programming and diagnostics. Firmware must also accommodate the NRND lifecycle status through a controlled procurement and change-management plan.
Inirekomenda
Test and Measurement Instrument
The MC9S12C96CFAE can control a compact test or measurement instrument when the product needs deterministic sequencing, front-panel logic, data logging, and communications in one embedded platform. The 16-bit HCS12 core handles instrument commands at up to 25 MHz, and 96 KB of flash can retain firmware, test sequences, and calibration information. Its 48-LQFP package offers sufficient external connectivity for sensors, displays, measurement front ends, and service interfaces. Product development should confirm the exact ADC, timer, and communication resources in the manufacturer datasheet before assigning precision measurement functions. Good practice includes separate analog and digital layout regions, local supply decoupling, defined reset behavior, and firmware revision tracking for calibration and traceability.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MC9S12C96CFAE — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MC9S12GC96MFAE |
|---|---|---|
| Package | 48-LQFP, 7 mm x 7 mm | 48-LQFP |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 96 KB | 96 KB |
| Programmable Storage Capacity | 96 KB flash | 96 KB flash |
Pangunahing mga Pagkakaiba
- Established 25 MHz HCS12 control platform (kumpara saMC9S12GC96MFAE)
- Exact 96 KB flash allocation (kumpara saMC9S12GC96MFAE)
- Documented 48-LQFP footprint (kumpara saMC9S12GC96MFAE)
Talaan ng Disenyo
Use the NXP package drawing and pin-description table as the authority for all 48-LQFP assignments. Place the required input and internal-regulator decoupling capacitors directly beside their associated power pins, using the shortest and lowest-inductance return paths practical. Keep oscillator, reset, and programming signals away from high-current switching-node traces, and route external interfaces according to the sensitivity of the signals they carry.
The supported external supply range is 2.97 V to 5.5 V, so the power architecture must remain within that range during startup, shutdown, and transients. Because the MCU uses an on-chip bandgap-based regulator for its internal digital supply, board-level decoupling should satisfy the manufacturer layout requirements rather than assuming an external regulator is always necessary. Validate brownout, reset, and power-sequencing behavior under the worst load and temperature conditions.
Do not treat a similar HCS12 part as a true drop-in replacement solely because both use a 48-LQFP package. Confirm pin names, alternate functions, clock limits, memory organization, peripheral availability, electrical characteristics, and software errata for every substitution. For an existing MC9S12C96CFAE design, preserve the approved firmware configuration and review any applicable errata before releasing a new hardware revision.
The 48-pin footprint leaves little spare routing area, so establish a pin-assignment plan before schematic capture. Partition communications, timing-critical signals, general I/O, power, ground, and programming functions to reduce simultaneous-switching noise. Follow the manufacturer recommendations for exposed or perimeter pads, solderable lands, and board-outline geometry, and inspect assembled boards for bridging on the fine-pitch gull-wing terminals.
Impormasyon ng Pagsunod sa Kautusan
NXP identifies the S12C family for industrial and automotive network applications, but the product listing does not establish the exact orderable variant's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes in the manufacturer environmental and quality documentation before release.