NXP

MC9S12H256VPV - 16-Bit 50MHz 256KB MCU | NXP

MPN: MC9S12H256VPV ✗ जीवन की समाप्ति
112-LQFP (20 mm x 20 mm) Package 50 MHz Speed 256 KB (256K x 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

MC9S12H256VPV अवलोकन

The NXP MC9S12H256VPV is a 16-bit HCS12 automotive microcontroller with a 50 MHz CPU12 core, 256 KB of flash program memory, and a 112-lead LQFP package measuring 20 mm by 20 mm. It combines embedded flash, automotive-oriented I/O, communication interfaces, and analog conversion resources in a single mixed-signal microcontroller.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one die. The MC9S12H256VPV belongs to the HCS12 family, whose CPU12 architecture provides a 16-bit instruction set for embedded control. Automotive electronic control units use this combination of deterministic control, serial communication, and mixed-signal peripherals to supervise actuators, sensors, communication networks, and vehicle body functions.

The principal device characteristics are a 16-bit CPU12 core, 50 MHz maximum clocking, and 256 KB of embedded flash memory. The device is offered in a 112-LQFP gull-wing package with a 20 mm by 20 mm body. These parameters make it suitable for automotive control modules that require substantial firmware storage while retaining the peripheral integration and package density expected in body and chassis electronics.

The HCS12 platform integrates flash program memory and an automotive communication architecture into the same device. The flash memory allows field-oriented firmware to be retained without an external program-memory chip. The package exposes 112 terminals for power, ground, clock, reset, programming, communications, and mixed-signal functions, supporting both legacy HCS12 module designs and compact controller assemblies.

Typical uses include automotive body-control modules, sensor-interface controllers, communication gateways, actuator controllers, and compact electronic control units. A 256 KB flash allocation can hold application code, calibration information, diagnostic routines, and communication stacks, while the 16-bit CPU supports control-loop processing across automotive subsystems.

Designers should preserve the exact 112-LQFP land pattern, power architecture, clocking arrangement, and peripheral assignments when creating a replacement. Reuse of an existing board also requires reviewing operating limits, errata, initialization code, interrupt configuration, and toolchain compatibility rather than comparing the processor clock and flash size alone.

This page combines the exact catalog identity, package information, sourcing guidance, compatible family references, and engineering-oriented selection criteria. It also distinguishes direct hardware reuse from broader HCS12 migration choices so procurement and design teams can assess compatibility without relying on part-number similarity alone.

के लिए ड्रॉप-इन विकल्प MC9S12H256VPV — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC9S12H256VPV (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package.

MC9S12H256VPVE

✅ ड्रॉप-इन
NXP Semiconductors
📦 112-LQFP (20 mm x 20 mm)
HCS12 (16-bit) · 50 MHz · 256 KB (256K x 8) · 12 KB · 4 KB · 4.5 V to 5.5 V (regulated internally to 2.5 V core) · -40 °C to +105 °C · 112-LQFP (20 x 20 mm)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC9S12DP256BMPV

✅ ड्रॉप-इन
📦 112-LQFP
Retains the 112-LQFP package and 256 KB flash; frequency, peripheral configuration, and initialization details require validation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MC9S12H256VPV Maximum Ratings और Electrical Characteristics

Microcontroller Type 16-bit HCS12 microcontroller
Processor Core CPU12
अधिकतम क्लॉक फ़्रीक्वेंसी 50 MHz
Program Memory Size 256 KB (256K x 8)
Program Memory Type Flash
पैकेज 112-LQFP (20 mm x 20 mm)
Number of Terminals 112 terminals
Terminal Form Gull wing
Package Shape Square
Technology CMOS
Series MC9S12

MC9S12H256VPV square पिन कॉन्फ़िगरेशन गाइड

MC9S12H256VPV (square पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

MC9S12H256VPV के लिए square पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S12H256VPV.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MC9S12H256VPV के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Body Control Module, Vehicle Sensor Interface Controller, Automotive Communication Gateway, Actuator Control Module, Automotive Diagnostic Interface, Legacy Platform Controller.

🚗

Automotive Body Control Module

The MC9S12H256VPV fits a body-control module that coordinates switches, lamps, locks, and other vehicle-body functions. Its 16-bit CPU12 core and listed 50 MHz operating point provide processing capacity for control logic, diagnostics, and communication handling. The 256 KB flash budget can hold application routines, lookup data, diagnostic services, and configuration information. The 112-LQFP package also exposes a broad set of automotive-oriented I/O. During integration, verify every peripheral assignment, interrupt vector, and power rail against the exact package documentation, and review initialization differences before updating an existing control-module design.

🧩

Vehicle Sensor Interface Controller

A sensor-interface controller can use the MC9S12H256VPV to acquire and process signals from switches, resistive sensors, and digital sensors before forwarding results to a vehicle network. The 50 MHz listed CPU12 clock supports responsive control and communication tasks, while 256 KB of flash provides room for calibration tables and diagnostic firmware. Its mixed-signal HCS12 heritage is valuable when a design must combine digital control with analog measurement functions. The key design checks are the ADC and sensor-interface details, electrical input limits, reference accuracy, and pin multiplexing. Those characteristics must be confirmed in the MC9S12H256 device documentation for the exact operating and qualification conditions.

🌐

Automotive Communication Gateway

The MC9S12H256VPV is appropriate for a communication gateway that translates or supervises traffic between vehicle modules. Its 16-bit CPU architecture and 256 KB flash allocation support protocol handling, diagnostic logic, routing tables, and application services. The 112-LQFP footprint provides numerous external connections for CAN, serial, programming, and signal-conditioning functions, subject to the device's actual peripheral allocation. Designers should compare interrupt latency, serial timing, bus transceiver interfaces, and clock configuration with the original system requirements. Because MC9S12 family members can differ in peripheral sets and startup behavior, firmware and schematics must be reviewed rather than assuming identical software support.

🔧

Actuator Control Module

In an actuator-control module, the MC9S12H256VPV can supervise outputs that drive pumps, valves, relays, or motors through external power stages. Its listed 50 MHz CPU12 core supports responsive state-machine execution, fault detection, and diagnostic reporting. The 256 KB flash capacity allows substantial control code plus lookup tables without requiring an external program-memory device. The 112-LQFP package offers enough pins for multiple control signals, communication links, and debugging functions, although the actual I/O count depends on the selected peripheral multiplexing. Production design work should include worst-case timing, output-state verification, watchdog behavior, brownout response, and validation of external driver interfaces.

🖥️

Automotive Diagnostic Interface

The MC9S12H256VPV can serve as the controller for a diagnostic interface that receives service requests, evaluates input channels, and returns status information. Its 16-bit CPU12 architecture supports structured protocol and diagnostic routines, and the 256 KB flash region can store diagnostic data, identifiers, and service software. The 112-LQFP package supports integration with vehicle communication circuitry, programming connectors, and discrete input channels. Engineers should verify the serial interface timing, interrupt priorities, clock tree, and watchdog behavior for the intended diagnostic response time. Firmware qualification should include power-cycle states, bus-off handling, corrupted-message tests, and compatibility with the vehicle's diagnostic standard.

🏭

Legacy Platform Controller

The MC9S12H256VPV is well suited to maintaining or cloning a legacy embedded platform where changing the microcontroller architecture would create unnecessary risk. Its 50 MHz listed operating point and 256 KB flash memory provide the processing and storage profile associated with HCS12 body and chassis electronics. The 112-LQFP package enables board-level reuse when the alternative retains equivalent dimensions and electrical characteristics. A migration should begin with a complete pin-function comparison, followed by startup, timer, serial, analog, and interrupt validation. Existing binaries may require recompilation or initialization changes if the selected replacement belongs to a related but distinct MC9S12 variant.

अनुशंसित उत्पादों का सारांश

MC9S12H256VPVE NXP Semiconductors उपयोग में: Automotive Body Control Module, Vehicle Sensor Interface Controller, Automotive Communication Gateway, Actuator Control Module, Automotive Diagnostic Interface, Legacy Platform Controller MC9S12DP256BMPV MC9S12 family candidate for 256 KB flash control functions उपयोग में: Automotive Body Control Module, Vehicle Sensor Interface Controller, Automotive Communication Gateway, Actuator Control Module, Automotive Diagnostic Interface, Legacy Platform Controller
What is the MC9S12H256VPV microcontroller?
The MC9S12H256VPV is a 16-bit HCS12 microcontroller with a 50 MHz CPU12 core and 256 KB of flash program memory. According to the DigiKey product listing, it is packaged as a 112-LQFP with a 20 mm by 20 mm body. It is designed for embedded automotive-control applications requiring integrated program memory, mixed-signal peripherals, and serial communications.
What are the key specifications of MC9S12H256VPV?
The MC9S12H256VPV is a 16-bit, 50 MHz HCS12 MCU with 256 KB of flash memory in a 112-LQFP package. The exact DigiKey listing identifies CPU12 processing, 256K x 8 flash organization, CMOS technology, and a 20 mm by 20 mm package. Other electrical details, including RAM, EEPROM, converter resolution, and supply limits, should be confirmed in the manufacturer documentation.
Where can I download the MC9S12H256VPV datasheet PDF?
The MC9S12H256VPV datasheet can be located through the linked Motorola datasheet archive for the MC9S12H256 family. The archive identifies the source document as a 130-page device user guide. Because MC9S12H256VPV is a specific package and ordering option, verify the package pin assignments, electrical limits, and ordering information for the exact suffix before releasing a production design.
Where can I find the MC9S12H256VPV pinout?
The MC9S12H256VPV pinout is found in the pin-description information for the MC9S12H256 device user guide and the 112-LQFP package drawing. The part uses a square 112-terminal gull-wing LQFP. Use the package pin-description table when assigning PCB tracks because assigning numbers solely by visual position can cause errors around the four sides of the package.
Is MC9S12H256VPV suitable for automotive electronics?
The MC9S12H256VPV is an HCS12 automotive microcontroller offered in an industrial package designation associated with the exact listing. Its 16-bit CPU12 core, 256 KB flash memory, and integrated control peripherals support automotive electronic control-unit designs. Confirm the exact temperature range, AEC-Q100 status, errata, and electrical limits for the production variant before qualification.
What is the difference between MC9S12H256VPV and MC9S12H256VPVE?
MC9S12H256VPV and MC9S12H256VPVE share the 112-LQFP package and 256 KB flash configuration, but their ordering suffixes indicate different qualification or temperature options. The DigiKey listing identifies MC9S12H256VPV as a 50 MHz device and MC9S12H256VPVE as a 16 MHz device. Confirm clock, temperature, and qualification details against the manufacturer documentation before substitution.
MC9S12H256VPV vs MC9S12DP256BMPV — which is better for an existing design?
MC9S12DP256BMPV is the closer hardware candidate when an existing MC9S12H256VPV board uses 256 KB flash and a 112-LQFP footprint. Both parts appear in the MC9S12 family with 256 KB flash, but MC9S12DP256BMPV represents a different device variant with different peripherals, initialization, and possibly clock behavior. A schematic, pinout, errata, and firmware review is still mandatory.
When should I choose MC9S12H256VPV over MC9S12H256VPVE?
Choose MC9S12H256VPV when an existing design depends on its listed 50 MHz operating point and the exact ordering option matches the vehicle program. Choose MC9S12H256VPVE only after confirming that the lower listed clock, temperature range, and qualification requirements are acceptable. The shared 112-LQFP footprint facilitates PCB reuse, but package similarity does not remove firmware or validation work.
Can MC9S12DP256BMPV replace MC9S12H256VPV without PCB changes?
MC9S12DP256BMPV can be considered for an MC9S12H256VPV board because the cross-reference comparison identifies 256 KB flash and a 112-LQFP package for both devices. It should not be treated as an unconditional substitution until pin assignments, clock configuration, peripheral mapping, electrical limits, startup behavior, and application software compatibility have been checked line by line.
What is the best drop-in replacement for MC9S12H256VPV?
MC9S12H256VPVE is the closest identified package-level option because it retains the 112-LQFP footprint and 256 KB flash configuration, but its listed 16 MHz clock differs from the 50 MHz MC9S12H256VPV. MC9S12DP256BMPV is another 112-LQFP, 256 KB-flash family candidate. The correct replacement depends on whether the design can tolerate the changed clock and peripheral differences.
Where can I buy MC9S12H256VPV online?
Use the Request a Quote form on this page to ask for MC9S12H256VPV availability, current unit cost, minimum order quantity, and production lot traceability. Because this is an older HCS12 microcontroller with aftermarket channel inventory, request the manufacturer, date code, condition, and package marking rather than relying only on the ordering code. The form lets procurement evaluate a controlled supply route.
What is the current price of MC9S12H256VPV?
The current commercial terms for MC9S12H256VPV should be requested through the Request a Quote form on this page. Pricing for this legacy MCU can vary with manufacturer traceability, date code, quantity, and package condition. Do not treat an old distributor-catalog amount as a current executable quotation, because stock and market requirements must be reconfirmed for the production build.
What is the lead time for MC9S12H256VPV?
The production lead time for MC9S12H256VPV must be confirmed through the Request a Quote form on this page. Lead time depends on available exact-suffix inventory, requested quantity, traceability, and inspection requirements. For an automotive controller program, provide the annual usage forecast and required approval timeline so the supplier can quote an appropriate supply schedule.
Is MC9S12H256VPV currently in stock?
MC9S12H256VPV availability must be checked through the Request a Quote form on this page before a build is released. The exact package, operating-speed option, manufacturer identity, and lot traceability should be confirmed with each quotation. Requesting a written stock and delivery response reduces the risk of mixing parts with different suffix or qualification requirements.
What can replace MC9S12H256VPV in a legacy automotive design?
The identified hardware candidates are MC9S12H256VPVE and MC9S12DP256BMPV because both are associated with the same MC9S12 family and a 112-LQFP footprint. MC9S12H256VPVE differs in listed clock speed, while MC9S12DP256BMPV may differ in peripheral configuration and device initialization. A qualified replacement requires pin, clock, peripheral, software, and qualification reviews.
Is MC9S12H256VPV the same as MC9S12DP256BMPV?
MC9S12H256VPV and MC9S12DP256BMPV are not identical devices even though both are 16-bit MC9S12 members with 256 KB flash and a 112-LQFP package. MC9S12DP256BMPV is a different family variant, so clocking, peripheral sets, initialization, and pin behavior can differ. Treat it as a migration candidate that requires engineering validation, not as an unconditional equivalent.
What is the best NXP equivalent for MC9S12H256VPV?
MC9S12DP256BMPV is the strongest NXP-family candidate identified by the available cross-reference information because it combines 256 KB flash with a 112-LQFP package. It is not a perfect functional equivalent: the target is listed at 50 MHz, and the alternate family designation indicates different device characteristics. Review the exact data sheets, errata, and application code before assigning it as the second source.

के लिए इंजीनियरिंग संदर्भ डेटा MC9S12H256VPV — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MC9S12H256VPV when maintaining an existing automotive or industrial HCS12 design that requires the exact MC9S12H256VPV identity, a listed 50 MHz operating point, 256 KB flash, and the 112-LQFP footprint. MC9S12H256VPVE is the closest identified option when the board can operate at 16 MHz and the ordering or qualification differences are acceptable. Consider MC9S12DP256BMPV when the design can accommodate a different MC9S12 variant with potentially different peripherals and initialization behavior. Neither alternative should be released solely on package and flash-size similarity: review electrical limits, pin multiplexing, clock setup, watchdog and reset behavior, communication peripherals, toolchain support, errata, and qualification. For production sourcing, request the exact suffix, manufacturer, traceability, date code, and condition through the quote form.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MC9S12H256VPVE MC9S12DP256BMPV
Package 112-LQFP (20 mm x 20 mm) 112-LQFP (20 mm x 20 mm) 112-LQFP
Brand NXP NXP NXP
Processor Architecture 16-bit CPU12 16-bit HCS12 16-bit HCS12
Program Memory 256 KB (256K x 8) flash 256 KB (256K x 8) flash 256 KB (256K x 8) flash
Series MC9S12 MC9S12 MC9S12
Terminal Count 112 terminals 112 terminals 112 terminals

मुख्य विशेषताएँ

  • Higher listed operating point within the identified package options (बनामMC9S12H256VPVE)
  • Matches the MC9S12H256 exact-family flash configuration (बनामMC9S12DP256BMPV)
  • Identifies the exact ordering option for legacy maintenance (बनामMC9S12DP256BMPV)

डिज़ाइन नोट्स

Treat the 112-LQFP footprint as a constrained, high-pin-count layout. Preserve the package dimensions, lead pitch, exposed or non-exposed pad arrangement, pin-1 orientation, and solder-mask land pattern specified for the exact package drawing. Route programming, clock, reset, communication, and power pins against the manufacturer pin-description table rather than relying on the approximate square outline. After substitution, use an ERC and pin-assignment comparison to identify power, ground, and multiplexed peripheral changes before release.

Do not select a replacement solely from package, flash size, and family name. Compare the startup clock configuration, oscillator requirements, watchdog behavior, reset sources, interrupt priorities, timer channels, serial interfaces, ADC functions, and peripheral pin multiplexing. The 50 MHz target and 16 MHz MC9S12H256VPVE have materially different timing headroom, and a related MC9S12 variant may require different initialization code. Validate with timer measurements, communication-loop tests, and fault-injection testing.

Confirm the exact device's input-voltage range, I/O voltage domains, power-up sequence, and brownout behavior from the manufacturer documentation before finalizing decoupling and protection. Place the required bulk and high-frequency capacitors according to the reference layout and keep sensitive clock and communication routes away from switching nodes. Because package-level alternatives may expose different multiplexing or voltage-domain assignments, verify every externally connected signal against the alternate part's pin table and operating limits.

Calculate the controller's worst-case dissipation from the actual supply voltage, I/O loading, clock activity, and ambient temperature rather than relying only on the 50 MHz operating point. The 112-LQFP package can provide substantial board-area heat spreading, but copper connectivity and airflow remain important in a sealed automotive enclosure. Validate thermal performance at the highest expected ambient temperature and with adjacent converters or power stages operating concurrently.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available catalog information identifies an automotive HCS12 MCU and an industrial package designation but does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. These fields remain unknown pending manufacturer documentation.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC9S12H256VPV datasheet MC9S12H256VPV datasheet pdf MC9S12H256VPV pinout MC9S12H256VPV schematic MC9S12H256VPV replacement MC9S12H256VPV equivalent MC9S12H256VPV cross reference MC9S12H256VPV vs MC9S12DP256BMPV MC9S12H256VPV vs MC9S12H256VPVE NXP MC9S12H256VPV MC9S12H256VPV LQFP-112 MC9S12H256VPV automotive microcontroller MC9S12H256VPV price MC9S12H256VPV stock MC9S12H256VPV buy

संबंधित कंपोनेंट्स और शब्द

NXP Motorola Freescale Semiconductor MC9S12H256VPV MC9S12H256VPVE MC9S12DP256BMPV HCS12 CPU12 16-bit microcontroller embedded flash memory mixed-signal microcontroller automotive electronic control unit vehicle body control module CAN communication serial communications interface analog-to-digital conversion 112-LQFP LQFP package family surface-mount package 50 MHz clock 256 KB flash watchdog timer automotive qualification direct pin-compatible replacement
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें