MCP3426A1-E/MC - 16-Bit Dual-Channel ADC | Microchip
MPN: MCP3426A1-E/MC ✓ सक्रियMCP3426A1-E/MC अवलोकन
A delta-sigma ADC is a type of analog-to-digital converter that oversamples and digitally filters its input before conversion. Within the ADC hierarchy, it belongs to the delta-sigma modulator and digital-decimation-filter architecture. The MCP3426A1-E/MC combines this conversion technique with an integrated precision reference and differential input architecture, making it suitable for sensors, industrial measurement systems, and low-level analog front ends.
The device provides up to 16 bits of resolution, two analog input channels, and a differential input range of ±2.048 V when referenced to the internal 2.048 V source. Its 240 SPS conversion rate supports continuous monitoring without the data rate associated with high-speed flash ADCs. The I2C interface reduces the required connection count compared with parallel converters, while the 8-DFN package supports compact, surface-mount PCB layouts.
Microchip describes the MCP3426 as a low-noise, high-accuracy converter family that combines differential analog inputs with an on-board precision reference. Differential operation rejects common-mode voltage and can improve measurement accuracy when the source is balanced around the converter’s common-mode voltage. The internal reference establishes a fixed, predictable conversion scale, reducing the number of external precision components required for basic bridge, sensor, and process-control measurements.
Typical uses include industrial pressure and temperature acquisition, current-shunt measurement, potentiometer and bridge-sensor conditioning, laboratory instrumentation, and low-frequency environmental monitoring. Differential inputs are particularly useful when the measured signal is small relative to the common-mode voltage. The 240 SPS rate is appropriate for changing process variables rather than high-bandwidth waveform capture.
For reliable operation, route analog inputs away from switching nodes, use a quiet ground reference, and follow the manufacturer’s recommended input and bypass-capacitor connections. Differential pairs should be routed with consistent geometry and geometry to minimize conversion error. The 8-DFN exposed pad also requires the recommended PCB land pattern and thermal-via arrangement to avoid assembly and thermal problems.
This page combines the manufacturer’s converter specifications with package guidance, application-focused design notes, and a comparison of same-family address variants. It helps engineers evaluate interface compatibility, analog range, conversion rate, and replacement options before committing a compact two-channel measurement design to PCB fabrication.
के लिए ड्रॉप-इन विकल्प MCP3426A1-E/MC — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MCP3426A1-E/MC (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Differential Input Range, Package, Resolution, Converter Type, Number of Input Channels.
MCP3426A6-E/MC
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MCP3426A7-E/MC
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MCP3426A1-E/MC Maximum Ratings और Electrical Characteristics
| रेज़ोल्यूशन | Up to 16 bits |
| Number of Input Channels | 2 |
| Conversion Architecture | Delta-sigma |
| Input Type | Differential |
| Maximum Conversion Rate | 240 samples/s |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Digital Interface | Two-wire I2C |
| On-Board Reference | Yes, 2.048 V precision reference |
| पैकेज | 8-DFN (2 x 3 mm) |
| माउंटिंग प्रकार | Surface mount |
| सप्लाई वोल्टेज | 3.3 V or 5 V |
| Automotive Application | Automotive-qualified variant indicated in the product listing |
MCP3426A1-E/MC 8-dfn (2 x 3 mm) पिन कॉन्फ़िगरेशन गाइड
MCP3426A1-E/MC (8-dfn (2 x 3 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MCP3426A1-E/MC.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MCP3426A1-E/MC के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Pressure Sensor Acquisition, Current-Shunt Measurement, Temperature and Environmental Monitoring, Precision Test and Measurement, Battery and Process Monitoring, Portable Sensor Hub.
Industrial Pressure Sensor Acquisition
The MCP3426A1-E/MC fits bridge-based pressure sensing because it provides two differential channels, up to 16-bit resolution, and a 240 SPS conversion rate. Connect one bridge output to IN0+ and IN0-, with the second channel available for a reference or temperature sensor. Its internal 2.048 V reference establishes a stable conversion scale and permits a differential input span of ±2.048 V. Differential signaling helps reject common-mode voltage present on industrial sensor wiring. The 8-DFN 2 x 3 mm package also keeps the analog front end compact. Confirm that the bridge excitation, sensor output, common-mode level, and PCB leakage remain within the manufacturer’s electrical limits.
अनुशंसित
Current-Shunt Measurement
The MCP3426A1-E/MC is suitable for measuring small voltage drops across a current shunt while rejecting unrelated common-mode voltage. A 240 SPS conversion rate is ample for power monitoring, battery charging, or motor-control feedback where the measured current changes more slowly than high-speed waveform content. The two differential channels allow the shunt voltage and a second monitor input to be digitized through the same I2C bus. The 16-bit conversion resolution preserves useful detail in low-level measurements, while the integrated 2.048 V reference provides a defined scale. Layout the shunt and converter ground carefully to avoid introducing ground-plane gradients into the measured differential voltage.
अनुशंसित
Temperature and Environmental Monitoring
The MCP3426A1-E/MC can digitize resistive temperature sensors or low-level environmental sensor outputs in compact monitoring equipment. Its 240 SPS rate provides continuous updates for thermal control and trend logging, while two differential channels reduce the number of separate converter packages needed. The on-board 2.048 V reference permits direct use of the converter’s ±2.048 V differential range when the sensor circuit supports that excitation and signal level. For best results, keep sensor traces away from switching regulators and digital return currents, use a quiet analog ground region, and verify that sensor self-heating remains small relative to the required measurement accuracy.
अनुशंसित
Precision Test and Measurement
The MCP3426A1-E/MC works in low-speed laboratory and test equipment where a compact, high-resolution measurement channel is needed. Its 16-bit delta-sigma architecture is suited to thermocouple amplifiers, resistive sensors, and precision divider networks rather than high-frequency signal analysis. Two differential channels allow simultaneous measurement of a sensed quantity and a reference channel, while the 2.048 V internal reference simplifies gain planning. The I2C interface keeps the connection count low for embedded test fixtures. For laboratory-grade accuracy, validate the practical noise performance, input settling, reference behavior, and PCB leakage in the completed fixture rather than relying only on nominal resolution.
अनुशंसित
Battery and Process Monitoring
The MCP3426A1-E/MC is appropriate for monitoring slowly changing voltages in battery systems, power supplies, and process-control equipment. One differential channel can measure a scaled cell or bus voltage, while the second can monitor a temperature, current, or reference signal. At 240 SPS, the converter tracks thermal and electrical changes without the power and data-rate burden of a high-speed ADC. The internal 2.048 V reference gives the measurement path a deterministic ratio, and the compact 8-DFN package supports dense control boards. Apply proper input scaling and protection, keep the common-mode voltage within limits, and design the analog ground return to minimize error in low-current measurements.
अनुशंसित
Portable Sensor Hub
The MCP3426A1-E/MC fits portable and connected sensor products requiring two low-power analog measurements in a small footprint. The 8-DFN 2 x 3 mm package minimizes PCB area, while the 240 SPS delta-sigma conversion rate is suitable for body-worn, environmental, and portable instrumentation signals that vary over time. Differential inputs are valuable when sensor outputs are small and accompanied by common-mode noise. The I2C interface supports connection to a low-power embedded controller, and the internal 2.048 V reference avoids an external reference source in straightforward designs. Evaluate battery-life impact using actual conversion and I2C activity, and place the converter away from radio, display, and switching-converter power paths.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MCP3426A1-E/MC — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MCP3426A6-E/MC | MCP3426A7-E/MC |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) |
| Resolution | Up to 16 bits | Up to 16 bits | Up to 16 bits |
| Input Channels | 2 differential inputs | 2 differential inputs | 2 differential inputs |
| Conversion Rate | 240 samples/s | 240 samples/s | 240 samples/s |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V |
| Differential Input Range | ±2.048 V | ±2.048 V | ±2.048 V |
| Digital Interface | Two-wire I2C | Two-wire I2C | Two-wire I2C |
| Factory-Programmed I2C Address | 0x48 | 0x4D | 0x4F |
मुख्य विशेषताएँ
- Two differential channels in a compact package (बनामMCP3426A6-E/MC)
- Integrated precision reference simplifies scaling (बनामMCP3426A7-E/MC)
- Address-specific selection supports bus planning (बनामMCP3426A6-E/MC)
- Low-speed precision conversion for changing analog signals (बनामMCP3426A7-E/MC)
डिज़ाइन नोट्स
Use the 8-DFN land pattern and exposed-pad connection specified in the manufacturer package drawing. Place the converter close to the analog source and reference components, and route differential inputs as a matched pair. Keep switching-regulator outputs, inductors, and high-current return paths away from the analog inputs. The exposed pad requires the manufacturer-recommended solder, mask, and thermal-via treatment to maintain assembly reliability.
The two differential channels should use symmetrical routing, a continuous reference plane, and minimal stub branches. Avoid crossing analog traces over split ground boundaries, and place analog ground connections so measurement current does not flow through the converter’s sensitive return path. Differential input filtering should be distributed and calculated against the permitted settling time. Validate common-mode and differential input limits under the worst-case sensor or fault condition.
Do not treat the 16-bit nominal resolution as guaranteed useful accuracy without considering noise, reference behavior, input settling, PCB contamination, and sensor excitation. The internal 2.048 V reference is convenient, but external accuracy requirements may justify an external reference and additional analog circuitry. Also avoid confusing identical package variants with identical behavior: the MCP3426A1-E/MC and other MCP3426 suffix variants can use different factory-programmed I2C addresses, requiring corresponding firmware changes.
Follow the manufacturer’s recommended supply and bypass-capacitor connections, including the required voltage and capacitance values. Place bypass capacitors at the device power pins with short, low-inductance paths. Since the converter operates from 3.3 V or 5 V supplies, verify the selected rail across temperature and load before finalizing the power architecture. Account for I2C pull-up current separately from the converter’s operating supply when calculating the total power budget.
अनुपालन जानकारी
The product listing identifies an automotive variant, but the manufacturer product page and datasheet material supplied for this MPN do not explicitly state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.