Microchip Technology

MCP3426A1-E/MC - 16-Bit Dual-Channel ADC | Microchip

MPN: MCP3426A1-E/MC ✓ Aktif
2.048 V Vdss 8-DFN (2 x 3 mm) Package
MOQ: 1 |

MCP3426A1-E/MC Genel Bakış

The Microchip MCP3426A1-E/MC is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs, up to 240 samples per second, an on-board 2.048 V reference, and an 8-DFN 2 x 3 mm package. It uses a two-wire I2C interface for digital communication and supports analog measurement of two independent input pairs. The converter architecture is intended for low-noise, high-accuracy signal acquisition where compactness and low power are important.

A delta-sigma ADC is a type of analog-to-digital converter that oversamples and digitally filters its input before conversion. Within the ADC hierarchy, it belongs to the delta-sigma modulator and digital-decimation-filter architecture. The MCP3426A1-E/MC combines this conversion technique with an integrated precision reference and differential input architecture, making it suitable for sensors, industrial measurement systems, and low-level analog front ends.

The device provides up to 16 bits of resolution, two analog input channels, and a differential input range of ±2.048 V when referenced to the internal 2.048 V source. Its 240 SPS conversion rate supports continuous monitoring without the data rate associated with high-speed flash ADCs. The I2C interface reduces the required connection count compared with parallel converters, while the 8-DFN package supports compact, surface-mount PCB layouts.

Microchip describes the MCP3426 as a low-noise, high-accuracy converter family that combines differential analog inputs with an on-board precision reference. Differential operation rejects common-mode voltage and can improve measurement accuracy when the source is balanced around the converter’s common-mode voltage. The internal reference establishes a fixed, predictable conversion scale, reducing the number of external precision components required for basic bridge, sensor, and process-control measurements.

Typical uses include industrial pressure and temperature acquisition, current-shunt measurement, potentiometer and bridge-sensor conditioning, laboratory instrumentation, and low-frequency environmental monitoring. Differential inputs are particularly useful when the measured signal is small relative to the common-mode voltage. The 240 SPS rate is appropriate for changing process variables rather than high-bandwidth waveform capture.

For reliable operation, route analog inputs away from switching nodes, use a quiet ground reference, and follow the manufacturer’s recommended input and bypass-capacitor connections. Differential pairs should be routed with consistent geometry and geometry to minimize conversion error. The 8-DFN exposed pad also requires the recommended PCB land pattern and thermal-via arrangement to avoid assembly and thermal problems.

This page combines the manufacturer’s converter specifications with package guidance, application-focused design notes, and a comparison of same-family address variants. It helps engineers evaluate interface compatibility, analog range, conversion rate, and replacement options before committing a compact two-channel measurement design to PCB fabrication.

Drop-in alternatifler için MCP3426A1-E/MC — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MCP3426A1-E/MC (aynı form faktörü ve ayağa oturma) — farklı olan Differential Input Range, Package, Resolution, Converter Type, Number of Input Channels.

Microchip Technology
Package: 8-DFN, 2 x 3 mm
Converter Type: 16-bit delta-sigma ADC
Number of Input Channels: 2 channels
Microchip Technology
Differential Input Range: +/-2.048 V
Package: 8-DFN, 2 x 3 mm
Resolution: 16 bits

MCP3426A6-E/MC

✅ Yerleştirme
Microchip Technology
📦 8-DFN (2 x 3 mm)
16-bit delta-sigma ADC · 2 channels · 15 SPS · Up to 16 bits · Differential inputs · 2.048 V · ±2.048 V · Two-wire I2C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP3426A7-E/MC

✅ Yerleştirme
Microchip Technology
📦 8-DFN (2 x 3 mm)
Delta-sigma analog-to-digital converter · 16 bits · 2 channels · Differential inputs · 15 SPS · 2.048 V · +/-2.048 V · A7 gain configuration

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP3426A1-E/MC Maksimum Değerlendirmeler & Elektriksel Özellikler

Çözünürlük Up to 16 bits
Number of Input Channels 2
Conversion Architecture Delta-sigma
Input Type Differential
Maximum Conversion Rate 240 samples/s
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Digital Interface Two-wire I2C
On-Board Reference Yes, 2.048 V precision reference
Paket 8-DFN (2 x 3 mm)
Montaj Türü Surface mount
Besleme Gerilimi 3.3 V or 5 V
Automotive Application Automotive-qualified variant indicated in the product listing

MCP3426A1-E/MC 8-dfn (2 x 3 mm) Pin Yapısı Kılavuzu

MCP3426A1-E/MC (8-dfn (2 x 3 mm) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-dfn (2 x 3 mm) paket pin çizelgesi için MCP3426A1-E/MC

Ayrıntılı pin çıkış verisi mevcut değil: MCP3426A1-E/MC.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MCP3426A1-E/MC için uygundur 6 uygulamas: Industrial Pressure Sensor Acquisition, Current-Shunt Measurement, Temperature and Environmental Monitoring, Precision Test and Measurement, Battery and Process Monitoring, Portable Sensor Hub.

🏭

Industrial Pressure Sensor Acquisition

The MCP3426A1-E/MC fits bridge-based pressure sensing because it provides two differential channels, up to 16-bit resolution, and a 240 SPS conversion rate. Connect one bridge output to IN0+ and IN0-, with the second channel available for a reference or temperature sensor. Its internal 2.048 V reference establishes a stable conversion scale and permits a differential input span of ±2.048 V. Differential signaling helps reject common-mode voltage present on industrial sensor wiring. The 8-DFN 2 x 3 mm package also keeps the analog front end compact. Confirm that the bridge excitation, sensor output, common-mode level, and PCB leakage remain within the manufacturer’s electrical limits.

⚡

Current-Shunt Measurement

The MCP3426A1-E/MC is suitable for measuring small voltage drops across a current shunt while rejecting unrelated common-mode voltage. A 240 SPS conversion rate is ample for power monitoring, battery charging, or motor-control feedback where the measured current changes more slowly than high-speed waveform content. The two differential channels allow the shunt voltage and a second monitor input to be digitized through the same I2C bus. The 16-bit conversion resolution preserves useful detail in low-level measurements, while the integrated 2.048 V reference provides a defined scale. Layout the shunt and converter ground carefully to avoid introducing ground-plane gradients into the measured differential voltage.

🧩

Temperature and Environmental Monitoring

The MCP3426A1-E/MC can digitize resistive temperature sensors or low-level environmental sensor outputs in compact monitoring equipment. Its 240 SPS rate provides continuous updates for thermal control and trend logging, while two differential channels reduce the number of separate converter packages needed. The on-board 2.048 V reference permits direct use of the converter’s ±2.048 V differential range when the sensor circuit supports that excitation and signal level. For best results, keep sensor traces away from switching regulators and digital return currents, use a quiet analog ground region, and verify that sensor self-heating remains small relative to the required measurement accuracy.

🔧

Precision Test and Measurement

The MCP3426A1-E/MC works in low-speed laboratory and test equipment where a compact, high-resolution measurement channel is needed. Its 16-bit delta-sigma architecture is suited to thermocouple amplifiers, resistive sensors, and precision divider networks rather than high-frequency signal analysis. Two differential channels allow simultaneous measurement of a sensed quantity and a reference channel, while the 2.048 V internal reference simplifies gain planning. The I2C interface keeps the connection count low for embedded test fixtures. For laboratory-grade accuracy, validate the practical noise performance, input settling, reference behavior, and PCB leakage in the completed fixture rather than relying only on nominal resolution.

⚡

Battery and Process Monitoring

The MCP3426A1-E/MC is appropriate for monitoring slowly changing voltages in battery systems, power supplies, and process-control equipment. One differential channel can measure a scaled cell or bus voltage, while the second can monitor a temperature, current, or reference signal. At 240 SPS, the converter tracks thermal and electrical changes without the power and data-rate burden of a high-speed ADC. The internal 2.048 V reference gives the measurement path a deterministic ratio, and the compact 8-DFN package supports dense control boards. Apply proper input scaling and protection, keep the common-mode voltage within limits, and design the analog ground return to minimize error in low-current measurements.

📱

Portable Sensor Hub

The MCP3426A1-E/MC fits portable and connected sensor products requiring two low-power analog measurements in a small footprint. The 8-DFN 2 x 3 mm package minimizes PCB area, while the 240 SPS delta-sigma conversion rate is suitable for body-worn, environmental, and portable instrumentation signals that vary over time. Differential inputs are valuable when sensor outputs are small and accompanied by common-mode noise. The I2C interface supports connection to a low-power embedded controller, and the internal 2.048 V reference avoids an external reference source in straightforward designs. Evaluate battery-life impact using actual conversion and I2C activity, and place the converter away from radio, display, and switching-converter power paths.

Önerilen Ürünler Özeti

MCP3426A7T-E/MC Same MCP3426 family with a different factory-programmed I2C address Kullanıldığı Yer: Industrial Pressure Sensor Acquisition, Temperature and Environmental Monitoring MCP3426A1T-E/MC Same MCP3426 converter family with an alternate order suffix Kullanıldığı Yer: Industrial Pressure Sensor Acquisition, Temperature and Environmental Monitoring, Portable Sensor Hub MCP3426A6-E/MC Microchip Technology Kullanıldığı Yer: Current-Shunt Measurement, Precision Test and Measurement, Portable Sensor Hub MCP3427 Related MCP342X delta-sigma converter family member Kullanıldığı Yer: Current-Shunt Measurement, Battery and Process Monitoring MCP3428 Related MCP342X precision delta-sigma ADC family member Kullanıldığı Yer: Precision Test and Measurement MCP3426A7-E/MC Microchip Technology Kullanıldığı Yer: Battery and Process Monitoring
What are the key specifications of MCP3426A1-E/MC?
The MCP3426A1-E/MC provides up to 16-bit resolution, two differential analog input channels, and a conversion rate of 240 samples/s in an 8-DFN 2 x 3 mm package. According to the Microchip manufacturer datasheet for the MCP3426/7/8 family, it also includes a precision 2.048 V on-board reference and a two-wire I2C interface. These specifications make it appropriate for low-level, low-frequency industrial measurements where differential conversion, compact packaging, and accurate scaling are more important than high-bandwidth sampling.
What type of ADC is the MCP3426A1-E/MC?
The MCP3426A1-E/MC is a 16-bit delta-sigma analog-to-digital converter with two differential inputs. The Microchip manufacturer datasheet identifies delta-sigma conversion as the core architecture of the MCP3426/7/8 family. Delta-sigma ADCs use continuous sampling, oversampling, and digital filtering to produce accurate results at relatively low conversion rates. The MCP3426A1-E/MC therefore fits slow or moderate speed measurements such as sensors, process-control channels, and instrumentation rather than high-frequency signal capture.
What is the analog input range of MCP3426A1-E/MC?
The MCP3426A1-E/MC supports a differential input range of ±2.048 V when its internal 2.048 V reference is used. The Microchip manufacturer product page identifies the precision on-board reference and the resulting ±2.048 V differential range. Each channel uses two signal nodes, so common-mode voltage must remain within the device’s valid input operating limits. For inputs outside that range, use an appropriately rated attenuator or front-end circuit rather than assuming the absolute-maximum input voltage can be used as a signal range.
How fast can MCP3426A1-E/MC perform conversions?
The MCP3426A1-E/MC performs conversions at up to 240 samples per second. The 240 SPS figure is stated in the manufacturer-family listing for the MCP3426A1-E/MC and is appropriate for monitoring temperature, pressure, resistance, and other slowly changing analog quantities. It is not optimized for high-bandwidth waveform acquisition. Designers should also account for digital-interface timing and conversion sequencing when calculating the achievable sampling rate for a particular application.
Where can I download the MCP3426A1-E/MC datasheet PDF?
The official MCP3426A1-E/MC family datasheet is available from Microchip at the product-datasheet link on this page. It covers the MCP3426, MCP3427, and MCP3428 converters, including the MCP3426 used by the MCP3426A1-E/MC. The manufacturer page and the manufacturer PDF are the appropriate references for the package drawing, electrical characteristics, pin descriptions, recommended application circuit, and acquisition timing. Use the pin-description table when assigning PCB tracks and check the revision associated with the downloaded document.
Where can I find the MCP3426A1-E/MC pinout?
The MCP3426A1-E/MC pinout is shown in the MCP3426/7/8 manufacturer datasheet under the package and pin-description information for the 8-DFN 2 x 3 mm package. The part includes analog inputs, supply and ground connections, I2C interface signals, and an exposed thermal pad. Before routing a board, use the pin table and land-pattern drawing together because the exposed pad is normally soldered and may also be tied to ground according to the recommended layout.
Does MCP3426A1-E/MC use I2C or SPI?
The MCP3426A1-E/MC uses a two-wire I2C interface rather than SPI. The Microchip manufacturer product page describes the I2C connection, and the family documentation identifies the serial interface for programming and reading conversion results. I2C minimizes signal count but requires correct pull-up resistors and bus timing. When several converters share one bus, verify their factory-programmed addresses and account for the maximum bus capacitance and pull-up resistance.
Can MCP3426A6-E/MC replace MCP3426A1-E/MC?
The MCP3426A6-E/MC is a same-family MCP3426 option that can serve as a pin-compatible alternative when the different I2C address is acceptable. Its programmed address differs from the MCP3426A1-E/MC, so firmware and bus configuration must be changed before the board operates correctly. Both devices use the 8-DFN 2 x 3 mm package and the same 16-bit, two-channel delta-sigma architecture. Choose it for address diversification rather than as an unconditional, firmware-transparent substitution.
What is the best drop-in replacement for MCP3426A1-E/MC?
The MCP3426A6-E/MC is the closest identified same-package alternative, but it is drop-in only at the PCB-footprint level and not at the firmware-address level. The two devices share the 8-DFN 2 x 3 mm package and core converter function, while their factory-programmed I2C addresses differ. A replacement therefore requires updating the host software and checking every device address on the bus. No qualified cross-manufacturer, pin-compatible replacement was identified.
What can replace MCP3426A1-E/MC on the same PCB?
The MCP3426A6-E/MC can replace MCP3426A1-E/MC on the same 8-DFN 2 x 3 mm PCB footprint after its different I2C address is accounted for. The MCP3426A7-E/MC is another same-family address option for designs that can update the bus configuration. No cross-brand equivalent was established with the same pinout, reference configuration, conversion rate, and I2C behavior. Validate timing, input limits, exposed-pad layout, and firmware before treating either same-family option as a production substitute.
When should I choose MCP3426A1-E/MC over MCP3426A6-E/MC?
Choose MCP3426A1-E/MC when its factory-programmed I2C address fits the intended bus and the firmware is already designed for that address. Choose MCP3426A6-E/MC when a different address helps avoid conflicts or enables a planned device-address update. Both parts use the same 8-DFN 2 x 3 mm package and provide two 16-bit differential channels with a 240 SPS conversion rate, so the address and software configuration—not package size—should drive the selection.
Is MCP3426A1-E/MC suitable for sensor measurement?
The MCP3426A1-E/MC is suitable for low-frequency differential sensor measurements, including resistive bridges, current shunts, and temperature or pressure sensors. Its two differential channels, 16-bit resolution, 240 SPS rate, and integrated 2.048 V reference reduce the number of external signal-conditioning components. The sensor output must remain within the valid common-mode and differential input limits, and the excitation or sensor current should be selected to avoid exceeding device ratings.
Where can I buy MCP3426A1-E/MC online?
Use the Request a Quote form on this page to request MCP3426A1-E/MC availability, current pricing, and order quantities. The form is the appropriate route for a quotation because availability and commercial terms can change independently of the technical data. State the exact MCP3426A1-E/MC suffix, required quantity, and preferred shipping destination in the request. The manufacturer product and datasheet links on this page remain the primary references for technical suitability.
What is the price of MCP3426A1-E/MC?
The current price of MCP3426A1-E/MC should be obtained through the Request a Quote form on this page rather than from a static article value. Quotations can reflect quantity, availability, and shipment requirements, so a historical or starting price may not represent the purchasable unit cost. Submit the exact MCP3426A1-E/MC suffix and required quantity for a current commercial response. The technical comparison and package information on this page remain independent of the quoted amount.
What is the lead time and stock status for MCP3426A1-E/MC?
Request the current MCP3426A1-E/MC stock position and lead time through the Request a Quote form on this page. The manufacturer product page lists the MCP3426 family as an active product, but it does not establish a fixed lot-level inventory or delivery commitment for every order quantity. Include your required delivery date and annual usage in the request so the supplier can confirm the appropriate supply plan and permissible quantity increments.

Mühendislik referans verileri: MCP3426A1-E/MC — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MCP3426A1-E/MC when the design needs two differential measurements, up to 16-bit resolution, a 240 SPS conversion rate, and a fixed I2C address compatible with the existing firmware. Its integrated 2.048 V reference and 8-DFN 2 x 3 mm package are particularly useful for compact sensor and industrial monitoring boards. The MCP3426A6-E/MC is the practical PCB-footprint alternative when its different I2C address can be assigned in software, allowing address diversification or supply flexibility. The MCP3426A7-E/MC offers another same-family address choice under the same footprint and converter architecture. No qualified cross-brand drop-in equivalent was identified, so changing manufacturers requires a complete review of pinout, input range, acquisition timing, reference behavior, I2C command compatibility, and exposed-pad layout rather than only a footprint comparison.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MCP3426A6-E/MC MCP3426A7-E/MC
Brand Microchip Technology Microchip Technology Microchip Technology
Package 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm)
Resolution Up to 16 bits Up to 16 bits Up to 16 bits
Input Channels 2 differential inputs 2 differential inputs 2 differential inputs
Conversion Rate 240 samples/s 240 samples/s 240 samples/s
Internal Reference 2.048 V 2.048 V 2.048 V
Differential Input Range ±2.048 V ±2.048 V ±2.048 V
Digital Interface Two-wire I2C Two-wire I2C Two-wire I2C
Factory-Programmed I2C Address 0x48 0x4D 0x4F

Ana Farklılayıcılar

  • Two differential channels in a compact package (karşılaştırma:MCP3426A6-E/MC)
  • Integrated precision reference simplifies scaling (karşılaştırma:MCP3426A7-E/MC)
  • Address-specific selection supports bus planning (karşılaştırma:MCP3426A6-E/MC)
  • Low-speed precision conversion for changing analog signals (karşılaştırma:MCP3426A7-E/MC)

Tasarım Notları

Use the 8-DFN land pattern and exposed-pad connection specified in the manufacturer package drawing. Place the converter close to the analog source and reference components, and route differential inputs as a matched pair. Keep switching-regulator outputs, inductors, and high-current return paths away from the analog inputs. The exposed pad requires the manufacturer-recommended solder, mask, and thermal-via treatment to maintain assembly reliability.

The two differential channels should use symmetrical routing, a continuous reference plane, and minimal stub branches. Avoid crossing analog traces over split ground boundaries, and place analog ground connections so measurement current does not flow through the converter’s sensitive return path. Differential input filtering should be distributed and calculated against the permitted settling time. Validate common-mode and differential input limits under the worst-case sensor or fault condition.

Do not treat the 16-bit nominal resolution as guaranteed useful accuracy without considering noise, reference behavior, input settling, PCB contamination, and sensor excitation. The internal 2.048 V reference is convenient, but external accuracy requirements may justify an external reference and additional analog circuitry. Also avoid confusing identical package variants with identical behavior: the MCP3426A1-E/MC and other MCP3426 suffix variants can use different factory-programmed I2C addresses, requiring corresponding firmware changes.

Follow the manufacturer’s recommended supply and bypass-capacitor connections, including the required voltage and capacitance values. Place bypass capacitors at the device power pins with short, low-inductance paths. Since the converter operates from 3.3 V or 5 V supplies, verify the selected rail across temperature and load before finalizing the power architecture. Account for I2C pull-up current separately from the converter’s operating supply when calculating the total power budget.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The product listing identifies an automotive variant, but the manufacturer product page and datasheet material supplied for this MPN do not explicitly state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MCP3426A1-E/MC datasheet MCP3426A1-E/MC specifications MCP3426A1-E/MC pinout MCP3426A1-E/MC datasheet pdf MCP3426A1-E/MC equivalent MCP3426A1-E/MC replacement MCP3426A1-E/MC cross reference MCP3426A1-E/MC vs MCP3426A6-E/MC MCP3426A1-E/MC price MCP3426A1-E/MC stock Microchip MCP3426A1-E/MC MCP3426A1-E/MC 240 SPS ADC MCP3426A1-E/MC 8-DFN pinout MCP3426A1-E/MC sensor measurement

İlgili Bileşenler ve Terimler

Microchip Technology MCP3426A1-E/MC MCP3426A6-E/MC MCP3426A7-E/MC MCP3426 MCP3427 MCP3428 delta-sigma ADC analog-to-digital converter data converter mixed-signal IC semiconductor differential input I2C two-wire interface 2.048 V precision reference 240 samples/s 16-bit resolution 8-DFN QFN family surface-mount package industrial sensor measurement current-shunt measurement process monitoring RoHS
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle