MCP3550-60E/SN - 22-Bit 15 SPS Delta-Sigma ADC | Microchip Technology
MPN: MCP3550-60E/SN ✓ सक्रियMCP3550-60E/SN अवलोकन
A sigma-delta ADC is a type of analog-to-digital converter that uses oversampling and digital filtering to deliver high resolution with excellent noise performance at low conversion rates. In the broader semiconductor hierarchy, the MCP3550-60E/SN belongs to the ADC/DAC category and specifically serves as a low-power precision conversion IC for sensors and process-control signals. Its single-channel architecture reduces conversion complexity while its differential input supports measurement of small signals referenced to a common-mode voltage.
Key features include 22-bit nominal resolution, a 15 SPS output rate, single-channel differential conversion, and 50/60 Hz rejection suited to rejecting power-line-related disturbance. The device operates from 2.7 V and supports an industrial temperature range of -40°C to +125°C. Its 8-pin SOIC package is available for compact analog measurement circuits requiring a conventional surface-mount footprint.
The MCP3550/1/3 family uses a sigma-delta conversion architecture optimized for low-bandwidth, high-resolution measurement. The 15 SPS rate is appropriate for slowly changing quantities such as temperature, pressure, load-cell output, or chemical-sensor output. Differential analog inputs make the converter suitable for circuits that reject common-mode noise, while the 50/60 Hz rejection targets interference commonly encountered in industrial environments.
Typical uses include precision temperature measurement, pressure and load-cell signal acquisition, industrial process control, battery and power-system monitoring, laboratory instrumentation, and low-rate sensor interfaces. The device is especially relevant when the measured signal changes slowly and high resolution is more valuable than rapid sampling. Systems requiring faster acquisition should choose an ADC explicitly designed for that throughput.
Design around the converter's differential input architecture, supported supply range, and digital interface requirements. Provide appropriate input filtering and observe the manufacturer recommendations for bypass capacitors and signal-source settling. Keep sensitive analog traces short, isolate them from switching-node currents, and confirm acquisition timing before choosing oversampling or averaging settings.
This product page combines the confirmed conversion specifications, package information, lifecycle status, drop-in family alternatives, practical PCB guidance, and a parameter-by-parameter comparison. It is designed to help engineers locate the datasheet, verify footprint compatibility, plan signal conditioning, and qualify the MCP3550-60E/SN for precision embedded measurement systems.
के लिए ड्रॉप-इन विकल्प MCP3550-60E/SN — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MCP3550-60E/SN (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Conversion Rate, Operating Temperature Range.
MCP3550-50E/SN
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →MCP3551-E/SN
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →MCP3551-50E/SN
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MCP3553-50E/SN
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MCP3553-60E/SN
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MCP3550-60E/SN Maximum Ratings और Electrical Characteristics
| रेज़ोल्यूशन | 22 bit |
| Conversion Rate | 15 SPS |
| Number of Channels | 1 channel |
| Architecture | Sigma-delta |
| Input Type | Fully differential |
| सप्लाई वोल्टेज | 2.7 V |
| Line-Frequency Rejection | 50 Hz and 60 Hz |
| ऑपरेटिंग तापमान रेंज | -40°C to +125°C |
| पैकेज | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount |
| Automotive Qualification | AEC-Q100 |
| Output Interface | Serial |
| Effective Resolution | 21.9 bit |
MCP3550-60E/SN 8-pin soic पिन कॉन्फ़िगरेशन गाइड
MCP3550-60E/SN (8-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MCP3550-60E/SN.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MCP3550-60E/SN के लिए उपयुक्त है 6 अनुप्रयोगs: Precision Temperature Measurement, Industrial Pressure and Load Measurement, Process-Control Monitoring, Battery and Power-System Monitoring, Laboratory and Test Instrumentation, Chemical and Environmental Sensors.
Precision Temperature Measurement
The MCP3550-60E/SN fits slow temperature-sensing systems where the RTD or thermistor output changes gradually and can be measured near the converter's 15 SPS limit. Its 22-bit resolution preserves small temperature changes, while the fully differential input can accept a bridge or differential sensor output and reject common-mode voltage. The 50/60 Hz rejection helps prevent mains-related interference from dominating the result. Place the sensor interface close to the ADC, use differential routing, and filter the sensor only enough to remove high-frequency noise without adding excessive settling delay.
अनुशंसित
Industrial Pressure and Load Measurement
The MCP3550-60E/SN is appropriate for bridge-based pressure, force, and load-cell measurements that produce a small differential signal over a common-mode voltage. The 22-bit resolution supports fine signal discrimination, and the 15 SPS conversion rate is sufficient for static force readings and slowly changing process pressure. Its differential input architecture enables matched analog routing, which reduces the effect of common-mode pickup. The analog section should remain separated from digital and switching circuitry, and the amplifier or bridge excitation circuit must settle within the selected conversion interval.
अनुशंसित
Process-Control Monitoring
The MCP3550-60E/SN can digitize slow process variables such as tank level, valve position, flow proxy, or chemical concentration when the measured quantity does not require high-rate sampling. Its single-channel 22-bit conversion provides detailed numerical representation for control loops, while 50/60 Hz rejection supports installations exposed to power-line interference. Differential input routing helps maintain signal integrity in industrial cabinets. Use the manufacturer's recommended input network and bypass capacitors, and ensure that filter components are selected for the 15 SPS conversion schedule rather than an unnecessarily fast response.
अनुशंसित
Battery and Power-System Monitoring
The MCP3550-60E/SN suits low-rate battery, supply, or power-rail monitoring when the controller needs accurate voltage information rather than transient waveform capture. A 22-bit converter can preserve fine changes in slowly varying rail voltage, and the differential input allows the measurement to be referenced cleanly through a resistive network. The 15 SPS rate is suitable for supervisory measurements, while the 50/60 Hz rejection helps reject environmental coupling. The source impedance, filter network, and converter input range must be verified so the divider does not exceed the electrical limits.
अनुशंसित
Laboratory and Test Instrumentation
The MCP3550-60E/SN can serve as the conversion element in precision laboratory instruments that measure slow sensor or reference signals. Its 22-bit nominal resolution is valuable when the expected signal is small, and the fully differential input supports front ends built around instrumentation-style signal conditioning. The 15 SPS rate is appropriate for panel meters, calibration equipment, and monitoring displays rather than oscilloscope-like acquisition. Keep the analog input path short, use a stable reference arrangement as required by the family architecture, and design the digital interface timing around the converter's data-valid behavior.
अनुशंसित
Chemical and Environmental Sensors
The MCP3550-60E/SN is suitable for chemical, gas, humidity, and environmental sensors whose analog output varies slowly and benefits from high resolution. The single-channel differential input can receive an appropriately biased sensor signal, while 22-bit resolution allows the system to detect changes that would be difficult to resolve with a lower-resolution converter. Its 50/60 Hz rejection can reduce interference in installations near AC-powered equipment. The sensor's settling behavior and output impedance must be checked against the 15 SPS schedule, and reference-ground connections should follow the manufacturer's analog-layout guidance.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MCP3550-60E/SN — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MCP3550-50E/SN | MCP3551-E/SN | MCP3551-50E/SN | MCP3553-50E/SN | MCP3553-60E/SN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Resolution | 22 bit | 22 bit | 22 bit | 22 bit | 22 bit | 22 bit |
| Conversion Rate | 15 SPS | 15 SPS | 13 SPS | 13 SPS | 13 SPS | 13 SPS |
| Number of Channels | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Architecture | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta |
| Input Configuration | Fully differential | Fully differential | Fully differential | Fully differential | Fully differential | Fully differential |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
| Supply Voltage | 2.7 V | 2.7 V | 2.7 V | 2.7 V | 2.7 V | 2.7 V |
मुख्य विशेषताएँ
- Exact 15 SPS operating selection (बनामMCP3551-E/SN)
- Combined 50 Hz and 60 Hz rejection selection (बनामMCP3550-50E/SN)
- Automotive-grade ordering option in the 8-pin SOIC footprint (बनामMCP3550-50E/SN)
डिज़ाइन नोट्स
Route the differential input as a compact, symmetrical pair and keep it away from switching nodes, clock lines, and high-current power paths. Place the input filtering network, bypass capacitors, and any reference components close to the MCP3550-60E/SN. The converter's 15 SPS rate allows relatively slow filtering, but excessively high source impedance or mismatched differential routing can degrade settling and effective common-mode rejection.
Design the analog front end to settle before each 15 SPS conversion. Verify the sensor or amplifier output impedance against the manufacturer's recommended input network, and use matched resistors where practical. Because the device has fully differential inputs, preserve the intended polarity and common-mode range rather than converting the signal to a single-ended input. Use the manufacturer pin-description table when assigning PCB tracks and bypass connections.
Use the 50/60 Hz rejection selection as one layer of interference control, not as a substitute for sound analog layout. Keep high-current switching loops compact, connect analog and digital return currents deliberately, and isolate sensitive input traces from converter and clock circuitry. If a switching supply is present, place filtering and filtering capacitors at the ADC supply pins and evaluate the resulting power rail with an oscilloscope before finalizing the board.
Do not treat the 22-bit nominal resolution as 22 useful bits without checking noise, reference stability, input filtering, and settling in the complete signal chain. Likewise, 15 SPS is not suitable for high-frequency waveform acquisition. Verify the exact MCP3550-60E/SN ordering code, 8-pin SOIC land pattern, supply sequencing, digital timing, and calibration procedure against the manufacturer datasheet before releasing production artwork.
अनुपालन जानकारी
The MCP3550-60E/SN listing identifies AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer documentation for the exact ordering code.