Microchip Technology

MCP3550-60E/SN - 22-Bit 15 SPS Delta-Sigma ADC | Microchip Technology

MPN: MCP3550-60E/SN ✓ Nakahanda
2.7 V Vdss 8-pin SOIC Package 50 Hz and 60 Hz Speed
MOQ: 1 |

MCP3550-60E/SN Ulas

Microchip Technology MCP3550-60E/SN is a 22-bit, single-channel sigma-delta analog-to-digital converter with a 15 SPS conversion rate, 50/60 Hz rejection, and an 8-pin SOIC package. Designed for precision measurement rather than high-speed waveform acquisition, it converts low-bandwidth differential sensor signals into serial digital data for industrial control, process measurement, and precision instrumentation.

A sigma-delta ADC is a type of analog-to-digital converter that uses oversampling and digital filtering to deliver high resolution with excellent noise performance at low conversion rates. In the broader semiconductor hierarchy, the MCP3550-60E/SN belongs to the ADC/DAC category and specifically serves as a low-power precision conversion IC for sensors and process-control signals. Its single-channel architecture reduces conversion complexity while its differential input supports measurement of small signals referenced to a common-mode voltage.

Key features include 22-bit nominal resolution, a 15 SPS output rate, single-channel differential conversion, and 50/60 Hz rejection suited to rejecting power-line-related disturbance. The device operates from 2.7 V and supports an industrial temperature range of -40°C to +125°C. Its 8-pin SOIC package is available for compact analog measurement circuits requiring a conventional surface-mount footprint.

The MCP3550/1/3 family uses a sigma-delta conversion architecture optimized for low-bandwidth, high-resolution measurement. The 15 SPS rate is appropriate for slowly changing quantities such as temperature, pressure, load-cell output, or chemical-sensor output. Differential analog inputs make the converter suitable for circuits that reject common-mode noise, while the 50/60 Hz rejection targets interference commonly encountered in industrial environments.

Typical uses include precision temperature measurement, pressure and load-cell signal acquisition, industrial process control, battery and power-system monitoring, laboratory instrumentation, and low-rate sensor interfaces. The device is especially relevant when the measured signal changes slowly and high resolution is more valuable than rapid sampling. Systems requiring faster acquisition should choose an ADC explicitly designed for that throughput.

Design around the converter's differential input architecture, supported supply range, and digital interface requirements. Provide appropriate input filtering and observe the manufacturer recommendations for bypass capacitors and signal-source settling. Keep sensitive analog traces short, isolate them from switching-node currents, and confirm acquisition timing before choosing oversampling or averaging settings.

This product page combines the confirmed conversion specifications, package information, lifecycle status, drop-in family alternatives, practical PCB guidance, and a parameter-by-parameter comparison. It is designed to help engineers locate the datasheet, verify footprint compatibility, plan signal conditioning, and qualify the MCP3550-60E/SN for precision embedded measurement systems.

Mga alternatibo na pwedeng ilagay na MCP3550-60E/SN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MCP3550-60E/SN (parehas na form factor at footprint) — pagkakaiba sa Conversion Rate, Operating Temperature Range.

Microchip Technology
Conversion Rate: 14 sps
Operating Temperature Range: -40 C to +125 C

MCP3550-50E/SN

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Microchip Technology
📦 8-pin SOIC
22 bit · 21.9 bit · 12.5 SPS · 1 channel · 1 sigma-delta · Fully differential analog input · 2.5 μV RMS · Automatic internal calibration

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP3551-E/SN

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Microchip Technology
📦 8-pin SOIC
Sigma-delta analog-to-digital converter · 22 bit · 1 channel · Fully differential analog input · 14 sps · 2.5 uVrms minimum · <10 ppm · 2.7 V to 5.5 V

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP3551-50E/SN

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SOIC
Same 22-bit single-channel sigma-delta family and 8-pin SOIC footprint; output-rate and nominal line-frequency-rejection selections differ

📋 Alternatibo na Reference (hindi sa katalogo)

MCP3553-50E/SN

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SOIC
Same MCP3550/1/3 22-bit single-channel family and 8-pin SOIC footprint; conversion-rate selection differs by up to 2 SPS

📋 Alternatibo na Reference (hindi sa katalogo)

MCP3553-60E/SN

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SOIC
Same MCP3550/1/3 22-bit single-channel architecture and 8-pin SOIC footprint; family conversion-rate selection differs by up to 2 SPS

📋 Alternatibo na Reference (hindi sa katalogo)

MCP3550-60E/SN Mga Pinakamataas na Rating at Electrical Characteristics

Pangangasiwaan 22 bit
Conversion Rate 15 SPS
Number of Channels 1 channel
Architecture Sigma-delta
Input Type Fully differential
Volte ng Pagbibigay 2.7 V
Line-Frequency Rejection 50 Hz and 60 Hz
Hanay ng Temperature na Operasyon -40°C to +125°C
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount
Automotive Qualification AEC-Q100
Output Interface Serial
Effective Resolution 21.9 bit

Gabay sa Pin Configuration ng MCP3550-60E/SN 8-pin soic

Pin configuration para sa MCP3550-60E/SN (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin soic package para sa MCP3550-60E/SN

Wala ng detalyadong pinout data na magagamit para sa MCP3550-60E/SN.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MCP3550-60E/SN ay nararapat para sa 6 aplikasyons: Precision Temperature Measurement, Industrial Pressure and Load Measurement, Process-Control Monitoring, Battery and Power-System Monitoring, Laboratory and Test Instrumentation, Chemical and Environmental Sensors.

🌡️

Precision Temperature Measurement

The MCP3550-60E/SN fits slow temperature-sensing systems where the RTD or thermistor output changes gradually and can be measured near the converter's 15 SPS limit. Its 22-bit resolution preserves small temperature changes, while the fully differential input can accept a bridge or differential sensor output and reject common-mode voltage. The 50/60 Hz rejection helps prevent mains-related interference from dominating the result. Place the sensor interface close to the ADC, use differential routing, and filter the sensor only enough to remove high-frequency noise without adding excessive settling delay.

🏭

Industrial Pressure and Load Measurement

The MCP3550-60E/SN is appropriate for bridge-based pressure, force, and load-cell measurements that produce a small differential signal over a common-mode voltage. The 22-bit resolution supports fine signal discrimination, and the 15 SPS conversion rate is sufficient for static force readings and slowly changing process pressure. Its differential input architecture enables matched analog routing, which reduces the effect of common-mode pickup. The analog section should remain separated from digital and switching circuitry, and the amplifier or bridge excitation circuit must settle within the selected conversion interval.

⚡

Process-Control Monitoring

The MCP3550-60E/SN can digitize slow process variables such as tank level, valve position, flow proxy, or chemical concentration when the measured quantity does not require high-rate sampling. Its single-channel 22-bit conversion provides detailed numerical representation for control loops, while 50/60 Hz rejection supports installations exposed to power-line interference. Differential input routing helps maintain signal integrity in industrial cabinets. Use the manufacturer's recommended input network and bypass capacitors, and ensure that filter components are selected for the 15 SPS conversion schedule rather than an unnecessarily fast response.

🔋

Battery and Power-System Monitoring

The MCP3550-60E/SN suits low-rate battery, supply, or power-rail monitoring when the controller needs accurate voltage information rather than transient waveform capture. A 22-bit converter can preserve fine changes in slowly varying rail voltage, and the differential input allows the measurement to be referenced cleanly through a resistive network. The 15 SPS rate is suitable for supervisory measurements, while the 50/60 Hz rejection helps reject environmental coupling. The source impedance, filter network, and converter input range must be verified so the divider does not exceed the electrical limits.

🖥️

Laboratory and Test Instrumentation

The MCP3550-60E/SN can serve as the conversion element in precision laboratory instruments that measure slow sensor or reference signals. Its 22-bit nominal resolution is valuable when the expected signal is small, and the fully differential input supports front ends built around instrumentation-style signal conditioning. The 15 SPS rate is appropriate for panel meters, calibration equipment, and monitoring displays rather than oscilloscope-like acquisition. Keep the analog input path short, use a stable reference arrangement as required by the family architecture, and design the digital interface timing around the converter's data-valid behavior.

🧩

Chemical and Environmental Sensors

The MCP3550-60E/SN is suitable for chemical, gas, humidity, and environmental sensors whose analog output varies slowly and benefits from high resolution. The single-channel differential input can receive an appropriately biased sensor signal, while 22-bit resolution allows the system to detect changes that would be difficult to resolve with a lower-resolution converter. Its 50/60 Hz rejection can reduce interference in installations near AC-powered equipment. The sensor's settling behavior and output impedance must be checked against the 15 SPS schedule, and reference-ground connections should follow the manufacturer's analog-layout guidance.

Buod ng mga Inirekomendang Produkto

MCP3550-50E/SN Microchip Technology Ginagamit sa: Precision Temperature Measurement, Battery and Power-System Monitoring, Chemical and Environmental Sensors MCP3551-E/SN Microchip Technology Ginagamit sa: Precision Temperature Measurement, Battery and Power-System Monitoring MCP3551-50E/SN Same-package precision ADC family alternative Ginagamit sa: Industrial Pressure and Load Measurement, Laboratory and Test Instrumentation MCP3553-50E/SN Same-family differential measurement ADC option Ginagamit sa: Industrial Pressure and Load Measurement, Laboratory and Test Instrumentation MCP3553-60E/SN Same-package family option for process measurement Ginagamit sa: Process-Control Monitoring, Chemical and Environmental Sensors MCP3550-60E/SN Microchip Technology Ginagamit sa: Process-Control Monitoring
What are the key specifications of MCP3550-60E/SN that engineers should know?
The MCP3550-60E/SN is a 22-bit, single-channel sigma-delta ADC operating at 15 SPS with fully differential inputs in an 8-pin SOIC package. According to the Microchip MCP3550/1/3 Data Sheet, document 20001950F, the family operates from -40°C to +125°C and is intended for precision sensor, industrial-control, and process-control measurements. The 50/60 Hz rejection is particularly useful where the measured signal is slow and line-frequency interference could corrupt the conversion.
What is the conversion rate of MCP3550-60E/SN?
The MCP3550-60E/SN converts at 15 samples per second. According to the Microchip manufacturer product page, the MCP3550-60 is a 22-bit, 15 SPS, single-channel ADC. This rate is suitable for temperature, pressure, load-cell, and industrial process signals that change slowly. It should not be selected for high-frequency waveform capture, motor monitoring, or other applications requiring rapid sampling.
What type of ADC is MCP3550-60E/SN?
The MCP3550-60E/SN is a sigma-delta analog-to-digital converter with a fully differential analog input. The Microchip MCP3550/1/3 Data Sheet, document 20001950F, describes this family as being optimized for high-resolution, low-bandwidth measurement. Its 22-bit resolution and 50/60 Hz rejection help extract slowly changing sensor information while suppressing common-mode and power-line-related noise.
Where can I download the MCP3550-60E/SN datasheet PDF?
The manufacturer-hosted MCP3550/1/3 PDF is available at https://ww1.microchip.com/downloads/en/DeviceDoc/20001950F.pdf. It covers the MCP3550, MCP3551, and MCP3553 family, including electrical characteristics, pin descriptions, application information, and recommended operating conditions. Use the device-specific marking and ordering information to confirm that MCP3550-60E/SN corresponds to the 8-pin SOIC configuration.
What package does MCP3550-60E/SN use?
The MCP3550-60E/SN uses an 8-pin SOIC package. Microchip's product listing identifies it as a 22-bit, single-channel, single-input sigma-delta converter in 8-SOIC. The /SN ordering suffix also appears in automotive-grade listings with an AEC-Q100 statement. Confirm that the board footprint accepts an 8-pin SOIC and verify the manufacturer's land pattern before fabrication.
Is MCP3550-60E/SN suitable for industrial sensor measurement?
Yes, the MCP3550-60E/SN is suitable for industrial sensor measurement when the signal bandwidth is low. Its 22-bit resolution, 15 SPS rate, fully differential input, and -40°C to +125°C operating range align with temperature, pressure, load-cell, and process-control signals. The 50/60 Hz rejection helps suppress line-frequency pickup, while the differential architecture allows careful grounding and filtering to control common-mode noise.
What can replace MCP3550-60E/SN on the same PCB?
The closest same-family drop-in candidates use the same 8-pin SOIC footprint and 22-bit sigma-delta architecture. MCP3550-50E/SN differs in its nominal line-frequency-rejection selection, while MCP3551-E/SN and MCP3551-50E/SN change the conversion-speed and rejection options. Because the MCP3550/1/3 family shares common electrical and digital-interface characteristics, verify the exact output-rate, rejection, polarity, and timing requirements before substitution.
What is the best drop-in replacement for MCP3550-60E/SN?
MCP3550-50E/SN is the closest same-family drop-in candidate when the required 50/60 Hz rejection remains acceptable and only the nominal rejection-selection code changes. It retains the 22-bit, single-channel, 15 SPS architecture and 8-pin SOIC package. This is a functional replacement selection, not an assertion that every board can be changed without checking the manufacturer datasheet, calibration assumptions, and acquisition timing.
Is MCP3550-60E/SN the same as MCP3551-E/SN?
No, MCP3550-60E/SN and MCP3551-E/SN are related but not identical selections within the MCP3550/1/3 family. Both are 22-bit, single-channel sigma-delta converters in the 8-pin SOIC family, but their conversion-rate and line-frequency-rejection options differ. Use the family datasheet to determine whether the changed operating selection satisfies the required measurement bandwidth, settling time, and interference rejection.
When should I choose MCP3550-60E/SN over MCP3551-E/SN?
Choose MCP3550-60E/SN when the design requires the 15 SPS MCP3550 selection with 50/60 Hz rejection. Choose MCP3551-E/SN when its corresponding family selection better matches the required output rate or interference-rejection behavior. Both use the same 8-pin SOIC architecture, making them useful for footprint reuse, but the operating selections must be checked against settling time and sensor bandwidth rather than chosen from package compatibility alone.
Where can I buy MCP3550-60E/SN online?
Use the Request a Quote form on this XAIPART product page to request MCP3550-60E/SN availability, current commercial terms, and lead time. The part is listed as an active Microchip product and distributor listings identify the exact 8-pin SOIC ordering code. MOQ, production allocation, and delivery timing should be confirmed for the quantity and date required by the project.
What is the price of MCP3550-60E/SN?
Current commercial pricing for MCP3550-60E/SN should be obtained through the Request a Quote form on this page. The form allows buyers to request quantity pricing, stock allocation, and delivery support without relying on a static price that may change. Provide the annual usage, order quantity, target date, and packaging requirement so the quote can reflect the intended procurement schedule.
What is the lead time for MCP3550-60E/SN?
The current lead time for MCP3550-60E/SN should be confirmed through the Request a Quote form on this page. Microchip lists the MCP3550-60 family as in production, and distributor records show the exact ordering code, but available quantity and manufacturing allocation can change. State the required quantity and target delivery date when requesting a quote so procurement can provide a schedule matched to the build.
Is MCP3550-60E/SN in stock?
Request current MCP3550-60E/SN inventory through the Request a Quote form on this page. Distributor listings identify the exact MPN, but a listing alone does not establish how many units can be allocated for a particular order. The manufacturer lists the MCP3550-60 family as in production, so buyers should request a quantity-specific availability confirmation for their production schedule.
What is the best Microchip equivalent for MCP3550-60E/SN?
MCP3550-50E/SN is the closest same-brand family alternative for an 8-pin SOIC design because it retains the MCP3550 architecture, 22-bit resolution, single-channel configuration, and 15 SPS conversion rate. MCP3551-E/SN and MCP3551-50E/SN provide additional same-footprint choices with different family selection characteristics. Cross-brand equivalents are not established here because a manufacturer-verified pin and parameter match was not identified.

Impormasyon ng Talumpati sa Engineering for MCP3550-60E/SN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MCP3550-60E/SN for a slow, high-resolution differential measurement that benefits from a 15 SPS conversion rate and both 50 Hz and 60 Hz rejection. Its 22-bit single-channel architecture is well suited to temperature, pressure, load-cell, battery-monitoring, and process-control signals in the 8-pin SOIC package. MCP3550-50E/SN is appropriate when 50 Hz rejection is sufficient and the exact 60 Hz selection is unnecessary. MCP3551-E/SN may be preferred when 13 SPS is acceptable, while MCP3551-50E/SN combines the slower family option with 50 Hz rejection. MCP3553-50E/SN and MCP3553-60E/SN provide same-family footprint alternatives when their operating characteristics better match the sensor bandwidth and interference environment. For every candidate, verify input range, output coding, digital timing, settling, qualification, and acquisition software assumptions before substituting it into an existing board.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MCP3550-50E/SN MCP3551-E/SN MCP3551-50E/SN MCP3553-50E/SN MCP3553-60E/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Resolution 22 bit 22 bit 22 bit 22 bit 22 bit 22 bit
Conversion Rate 15 SPS 15 SPS 13 SPS 13 SPS 13 SPS 13 SPS
Number of Channels 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Architecture Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta
Input Configuration Fully differential Fully differential Fully differential Fully differential Fully differential Fully differential
Operating Temperature Range -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C
Supply Voltage 2.7 V 2.7 V 2.7 V 2.7 V 2.7 V 2.7 V

Pangunahing mga Pagkakaiba

  • Exact 15 SPS operating selection (kumpara saMCP3551-E/SN)
  • Combined 50 Hz and 60 Hz rejection selection (kumpara saMCP3550-50E/SN)
  • Automotive-grade ordering option in the 8-pin SOIC footprint (kumpara saMCP3550-50E/SN)

Talaan ng Disenyo

Route the differential input as a compact, symmetrical pair and keep it away from switching nodes, clock lines, and high-current power paths. Place the input filtering network, bypass capacitors, and any reference components close to the MCP3550-60E/SN. The converter's 15 SPS rate allows relatively slow filtering, but excessively high source impedance or mismatched differential routing can degrade settling and effective common-mode rejection.

Design the analog front end to settle before each 15 SPS conversion. Verify the sensor or amplifier output impedance against the manufacturer's recommended input network, and use matched resistors where practical. Because the device has fully differential inputs, preserve the intended polarity and common-mode range rather than converting the signal to a single-ended input. Use the manufacturer pin-description table when assigning PCB tracks and bypass connections.

Use the 50/60 Hz rejection selection as one layer of interference control, not as a substitute for sound analog layout. Keep high-current switching loops compact, connect analog and digital return currents deliberately, and isolate sensitive input traces from converter and clock circuitry. If a switching supply is present, place filtering and filtering capacitors at the ADC supply pins and evaluate the resulting power rail with an oscilloscope before finalizing the board.

Do not treat the 22-bit nominal resolution as 22 useful bits without checking noise, reference stability, input filtering, and settling in the complete signal chain. Likewise, 15 SPS is not suitable for high-frequency waveform acquisition. Verify the exact MCP3550-60E/SN ordering code, 8-pin SOIC land pattern, supply sequencing, digital timing, and calibration procedure against the manufacturer datasheet before releasing production artwork.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MCP3550-60E/SN listing identifies AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer documentation for the exact ordering code.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

mcp3550 datasheet mcp3550 pdf MCP3550-60E/SN datasheet MCP3550-60E/SN specifications MCP3550-60E/SN pinout MCP3550-60E/SN equivalent MCP3550-60E/SN replacement MCP3550-60E/SN vs MCP3551-E/SN MCP3550-60E/SN price MCP3550-60E/SN stock Microchip MCP3550-60E/SN MCP3550-60E/SN 8-pin SOIC MCP3550-60E/SN sensor measurement MCP3550-60E/SN 22-bit ADC MCP3550-60E/SN application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology MCP3550-60E/SN MCP3550-50E/SN MCP3551-E/SN MCP3551-50E/SN MCP3553-50E/SN MCP3553-60E/SN analog-to-digital converter ADC sigma-delta ADC precision ADC single-channel ADC fully differential input 22-bit resolution 15 SPS 50 Hz rejection 60 Hz rejection 8-pin SOIC SOIC package family surface-mount package industrial sensor measurement process control load-cell measurement temperature measurement AEC-Q100
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ