MSP430F2618TPN - 16MHz 116KB Flash Mixed-Signal MCU | TI
MPN: MSP430F2618TPN ✓ सक्रियMSP430F2618TPN अवलोकन
A mixed-signal microcontroller is an integrated circuit that combines a digital programmable controller with analog conversion functions. The MSP430 belongs to the microcontroller hierarchy, where CPU execution, flash memory, SRAM, timers, serial communication, and analog peripherals share one device. This integration reduces the number of separate components required when a system must process sensor inputs and control outputs while maintaining a compact, low-power architecture.
Key features include a maximum CPU frequency of 16 MHz, 116 KB flash organized as 116K x 8 with an additional 256 bytes, and 8 KB of SRAM. The analog subsystem includes one 12-bit ADC and two 12-bit DACs. Communication and data-movement resources include I2C, SPI, UART, a hardware multiplier, and DMA, allowing the MCU to move sampled data efficiently without excessive CPU intervention.
The MSP430 CPU16 uses a 16-bit RISC architecture with 16-bit registers and constant generators designed for compact, efficient control code. Its mixed-signal feature set allows an instrument to acquire an analog input, process it digitally, communicate through a serial interface, and generate an analog output from a single controller. DMA can reduce processor involvement during transfers, while the hardware multiplier accelerates multiply and accumulate operations commonly used in filtering and fixed-point signal processing.
Typical applications include portable measurement instruments, industrial process monitoring, sensor acquisition systems, motor and actuator controllers, low-power data loggers, and embedded control boards requiring both ADC and DAC channels. The two DAC outputs can generate reference or control voltages, while the ADC supports analog measurement. The I2C, SPI, and UART interfaces allow the MCU to connect sensors, displays, memories, transceivers, and host processors.
Designers should pay attention to analog grounding, reference-voltage stability, ADC and DAC signal conditioning, and the high number of package pins. Keep sensitive analog and digital return paths controlled, place decoupling capacitors close to their supply pins, and use the manufacturer pin-description and layout guidance when assigning all 80 LQFP connections. Confirm operating voltage, current, temperature grade, and peripheral multiplexing details against the device documentation before finalizing the schematic.
This product record combines the exact ordering information, memory configuration, analog resources, package details, and replacement analysis with practical selection guidance. It also distinguishes the MSP430F2618TPN from related ordering codes, helping engineers identify where footprint compatibility is supported and where firmware, temperature-grade, or packaging review is still required.
के लिए ड्रॉप-इन विकल्प MSP430F2618TPN — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MSP430F2618TPN (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Flash Memory, Package, Serial Interfaces, ADC Resolution, SRAM.
MSP430F2618TPM
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MSP430F2618TPN Maximum Ratings और Electrical Characteristics
| Product Type | 16-bit mixed-signal microcontroller |
| CPU Architecture | 16-bit RISC MSP430 CPU16 |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 116 KB (116K x 8 + 256 B) |
| SRAM | 8 KB |
| ADC Resolution | 12 bit |
| ADC Quantity | 1 |
| DAC Resolution | 12 bit |
| DAC Quantity | 2 |
| Serial Interfaces | I2C, SPI, and UART |
| Hardware Multiplier | Present |
| Direct Memory Access | Present |
| पैकेज | 80-pin LQFP (PN), 12 mm x 12 mm |
| माउंटिंग प्रकार | Surface mount |
| Temperature Grade | Industrial |
| Terminal Form | Gull wing |
MSP430F2618TPN 80-pin lqfp (pn), 12 mm x 12 mm पिन कॉन्फ़िगरेशन गाइड
MSP430F2618TPN (80-pin lqfp (pn), 12 mm x 12 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MSP430F2618TPN.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MSP430F2618TPN के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Acquisition, Programmable Test and Measurement, Industrial Process Control, Low-Power Data Logger, Sensor Interface Hub, Precision Control and Signal Generation.
Industrial Sensor Acquisition
The MSP430F2618TPN fits industrial sensor-acquisition equipment that must measure analog inputs and react without a separate host processor. Its 12-bit ADC performs the primary conversion, while the 16 MHz CPU16 core handles filtering, scaling, alarms, and control logic using 116 KB of flash and 8 KB of SRAM. The 80-pin LQFP also provides access to I2C, SPI, and UART for connecting sensors, memory, and a supervisory system. DMA can move sampled data with less CPU intervention. A robust design should isolate sensor inputs from digital switching, reference the ADC carefully, and confirm the exact analog input limits and pin multiplexing in the manufacturer datasheet.
अनुशंसित
Programmable Test and Measurement
The MSP430F2618TPN supports compact measurement instruments that need both signal acquisition and programmable analog output. A 12-bit ADC can sample the input under examination, and the two 12-bit DACs can create reference, excitation, or calibration voltages. The 16 MHz MSP430 CPU16 core provides enough throughput for control and numerical processing, while the hardware multiplier accelerates multiply-and-accumulate sequences commonly used in filtering. I2C and SPI support digital instruments and memory, and UART provides a simple host interface. The 80-pin package also leaves dedicated external connectivity, but analog grounding and reference design remain central to repeatable measurements.
अनुशंसित
Industrial Process Control
The MSP430F2618TPN can serve as the local controller in a process-control loop that reads a sensor, evaluates the measurement, and drives an analog control signal. The 12-bit ADC supports process-variable acquisition, the dual 12-bit DACs can generate control outputs, and the 16 MHz CPU16 core executes the control algorithm. Its 116 KB flash provides room for application code and configuration data, while 8 KB of SRAM supports working state and buffering. I2C or SPI can connect remote sensors, and UART can report operating information. Designers should verify output settling, sampling timing, and fail-safe behavior in the device documentation before assigning outputs to safety-critical functions.
अनुशंसित
Low-Power Data Logger
The MSP430F2618TPN is appropriate for a low-power data logger that periodically records analog measurements and later transfers them to a host. The 12-bit ADC captures sensor data, the 116 KB flash stores firmware and may provide local nonvolatile storage, and the 8 KB SRAM handles temporary buffers and operating state. UART offers a straightforward connection to a computer or communications module, while SPI and I2C support flash storage and additional sensors. DMA can improve transfer efficiency, and the hardware multiplier helps implement scaling and filtering. A practical design must control peripheral power, wake sources, and retention behavior while ensuring that logged data is written safely.
अनुशंसित
Sensor Interface Hub
The MSP430F2618TPN can act as a sensor-interface hub when several mixed-signal and digital functions must be coordinated. Its 12-bit ADC acquires analog sensor information, the two 12-bit DACs support stimulus or calibration outputs, and the CPU16 core normalizes the readings. I2C is suitable for low-speed sensors, SPI supports faster peripherals, and UART provides a host or service interface. DMA reduces processor load during transfers, while the hardware multiplier accelerates digital arithmetic. The 80-pin LQFP offers extensive I/O for status indicators, configuration inputs, and external interface logic. Firmware should include range checks, sensor fault detection, and recalibration paths because the MCU alone cannot establish sensor accuracy.
अनुशंसित
Precision Control and Signal Generation
The MSP430F2618TPN is suitable for compact control systems that combine sampled feedback with programmable analog drive. The two 12-bit DACs can represent a command or calibrated output, the 12-bit ADC can close the measurement loop, and the 16 MHz CPU16 core can calculate corrections. The hardware multiplier improves the efficiency of filtering and fixed-point control calculations, while DMA supports efficient data movement. Serial interfaces permit configuration, diagnostics, and coordination with external modules. Because the controller shares an 80-pin LQFP package, the design must carefully separate analog and digital paths, use a stable reference strategy, and verify timing and output-drive limitations directly from the manufacturer documentation.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MSP430F2618TPN — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MSP430F2618T |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 80-pin LQFP (PN), 12 mm x 12 mm | 80-pin LQFP |
| CPU Architecture | 16-bit RISC MSP430 CPU16 | MSP430 CPU16 |
| Maximum CPU Frequency | 16 MHz | 16 MHz |
| Flash Memory | 116 KB (116K x 8 + 256 B) | 116 KB |
| SRAM | 8 KB | 8 KB |
| ADC | One 12-bit ADC | 12-bit ADC |
| DAC | Dual 12-bit DAC | Dual 12-bit DAC |
| Serial Interfaces | I2C, SPI, and UART | I2C, SPI, and UART |
| Data-Movement Features | Hardware multiplier and DMA | Hardware multiplier and DMA |
मुख्य विशेषताएँ
- Integrated dual analog output capability (बनामMSP430F2618T)
- Substantial flash allocation for embedded control code (बनामMSP430F2618T)
- Three named serial interface families (बनामMSP430F2618T)
डिज़ाइन नोट्स
Treat the ADC and DAC paths as sensitive analog nets even though the MSP430F2618TPN integrates them with the digital controller. Route analog inputs away from high-speed switching and SPI return currents, use a compact analog ground region where appropriate, and place input filtering capacitors at the signal source rather than allowing long traces to act as antennas. Confirm every multiplexed analog and digital function against the manufacturer pin-description table before finalizing the 80-pin LQFP land pattern.
Place the required supply and reference capacitors directly beside their associated pins, with the shortest practical ground-return paths. Because this is an 80-pin LQFP, pin escape density can create routing pressure; assign the high-speed SPI signals, UART lines, ADC inputs, and reference connections early. Review the manufacturer recommended PCB layout and package drawing for exposed thermal-pad treatment, solder-mask clearance, and land-pattern dimensions rather than deriving the footprint solely from the 12 mm by 12 mm body size.
Do not assume that related MSP430F2618 ordering suffixes are identical without checking the manufacturer ordering table. MSP430F2618TPNR is identified as a reel-packed ordering option, while other device codes can represent different packaging, qualification, or temperature arrangements. Likewise, a nominal 16-bit DAC or ADC does not guarantee full-scale accuracy, linearity, or reference stability; verify acquisition time, output settling, and operating conditions for the actual analog circuit before production release.
Estimate the average supply current from the firmware workload rather than using the highest active-mode figure for every duty cycle. Account separately for CPU execution, ADC conversion, DAC output states, SPI and UART activity, flash wait states, and the duration of idle periods. Then size the regulator and local decoupling for both average demand and transient activity. The available snippets identify the MSP430 architecture as ultra-low-power but do not provide the numerical operating-mode currents needed for a final power budget.
अनुपालन जानकारी
The verified product snippets identify the device as industrial grade but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because the component is a general-purpose industrial microcontroller and no automotive qualification is identified.