Texas Instruments

MSP430F2618TPN - 16MHz 116KB Flash Mixed-Signal MCU | TI

部品番号: MSP430F2618TPN ✓ 生産中
80-pin LQFP (PN), 12 mm x 12 mm Package 16 MHz Speed 116 KB (116K x 8 + 256 B) Memory
MOQ: 1 |

MSP430F2618TPN 概要

Texas Instruments MSP430F2618TPN is a 16-bit mixed-signal microcontroller with a 16 MHz MSP430 CPU16 core, 116 KB of flash memory, 8 KB of SRAM, a 12-bit ADC, two 12-bit DACs, and hardware multiplier and DMA support in an 80-pin LQFP package measuring 12 mm by 12 mm. It combines low-power embedded control with analog signal conversion and multiple serial interfaces, making it suitable for industrial instrumentation, data acquisition, industrial control, and embedded sensing systems.

A mixed-signal microcontroller is an integrated circuit that combines a digital programmable controller with analog conversion functions. The MSP430 belongs to the microcontroller hierarchy, where CPU execution, flash memory, SRAM, timers, serial communication, and analog peripherals share one device. This integration reduces the number of separate components required when a system must process sensor inputs and control outputs while maintaining a compact, low-power architecture.

Key features include a maximum CPU frequency of 16 MHz, 116 KB flash organized as 116K x 8 with an additional 256 bytes, and 8 KB of SRAM. The analog subsystem includes one 12-bit ADC and two 12-bit DACs. Communication and data-movement resources include I2C, SPI, UART, a hardware multiplier, and DMA, allowing the MCU to move sampled data efficiently without excessive CPU intervention.

The MSP430 CPU16 uses a 16-bit RISC architecture with 16-bit registers and constant generators designed for compact, efficient control code. Its mixed-signal feature set allows an instrument to acquire an analog input, process it digitally, communicate through a serial interface, and generate an analog output from a single controller. DMA can reduce processor involvement during transfers, while the hardware multiplier accelerates multiply and accumulate operations commonly used in filtering and fixed-point signal processing.

Typical applications include portable measurement instruments, industrial process monitoring, sensor acquisition systems, motor and actuator controllers, low-power data loggers, and embedded control boards requiring both ADC and DAC channels. The two DAC outputs can generate reference or control voltages, while the ADC supports analog measurement. The I2C, SPI, and UART interfaces allow the MCU to connect sensors, displays, memories, transceivers, and host processors.

Designers should pay attention to analog grounding, reference-voltage stability, ADC and DAC signal conditioning, and the high number of package pins. Keep sensitive analog and digital return paths controlled, place decoupling capacitors close to their supply pins, and use the manufacturer pin-description and layout guidance when assigning all 80 LQFP connections. Confirm operating voltage, current, temperature grade, and peripheral multiplexing details against the device documentation before finalizing the schematic.

This product record combines the exact ordering information, memory configuration, analog resources, package details, and replacement analysis with practical selection guidance. It also distinguishes the MSP430F2618TPN from related ordering codes, helping engineers identify where footprint compatibility is supported and where firmware, temperature-grade, or packaging review is still required.

ドロップイン代替品: MSP430F2618TPN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MSP430F2618TPN (同一形状・フットプリント) — 相違点: Flash Memory, Package, Serial Interfaces, ADC Resolution, SRAM.

Texas Instruments
Flash Memory: 116 KB (116K x 8 + 256 bytes)
Package: 64-LQFP (10 mm x 10 mm)
Serial Interfaces: I2C, SPI, UART
比較対象 MSP430F2618TPN →
Texas Instruments
Flash Memory: 120 KB
Package: 80-LQFP, 12 mm x 12 mm
Serial Interfaces: UART, SPI, I2C
比較対象 MSP430F2618TPN →

MSP430F2618TPM

✅ ドロップイン
Texas Instruments
📦 80-pin LQFP (PN)
16-bit RISC · 16 MHz · 116 KB (116K x 8 + 256 bytes) · 8 KB · 12 bits · 12 bits · 2 · 2.2 V to 3.6 V

価格はお問い合わせください

データシートを見る →

MSP430F2618TPN 最大定格&電気的特性

Product Type 16-bit mixed-signal microcontroller
CPU Architecture 16-bit RISC MSP430 CPU16
Maximum CPU Frequency 16 MHz
Flash Memory 116 KB (116K x 8 + 256 B)
SRAM 8 KB
ADC Resolution 12 bit
ADC Quantity 1
DAC Resolution 12 bit
DAC Quantity 2
Serial Interfaces I2C, SPI, and UART
Hardware Multiplier Present
Direct Memory Access Present
パッケージ 80-pin LQFP (PN), 12 mm x 12 mm
実装タイプ Surface mount
Temperature Grade Industrial
Terminal Form Gull wing

MSP430F2618TPN 80-pin lqfp (pn), 12 mm x 12 mm ピン配置ガイド

MSP430F2618TPN (80-pin lqfp (pn), 12 mm x 12 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

MSP430F2618TPN の 80-pin lqfp (pn), 12 mm x 12 mm パッケージピン配置図

詳細なピン配置データはありません: MSP430F2618TPN.

詳細は データシート をご参照ください。

主な用途

MSP430F2618TPN の用途: 6 件s: Industrial Sensor Acquisition, Programmable Test and Measurement, Industrial Process Control, Low-Power Data Logger, Sensor Interface Hub, Precision Control and Signal Generation.

🏭

Industrial Sensor Acquisition

The MSP430F2618TPN fits industrial sensor-acquisition equipment that must measure analog inputs and react without a separate host processor. Its 12-bit ADC performs the primary conversion, while the 16 MHz CPU16 core handles filtering, scaling, alarms, and control logic using 116 KB of flash and 8 KB of SRAM. The 80-pin LQFP also provides access to I2C, SPI, and UART for connecting sensors, memory, and a supervisory system. DMA can move sampled data with less CPU intervention. A robust design should isolate sensor inputs from digital switching, reference the ADC carefully, and confirm the exact analog input limits and pin multiplexing in the manufacturer datasheet.

🔧

Programmable Test and Measurement

The MSP430F2618TPN supports compact measurement instruments that need both signal acquisition and programmable analog output. A 12-bit ADC can sample the input under examination, and the two 12-bit DACs can create reference, excitation, or calibration voltages. The 16 MHz MSP430 CPU16 core provides enough throughput for control and numerical processing, while the hardware multiplier accelerates multiply-and-accumulate sequences commonly used in filtering. I2C and SPI support digital instruments and memory, and UART provides a simple host interface. The 80-pin package also leaves dedicated external connectivity, but analog grounding and reference design remain central to repeatable measurements.

⚙️

Industrial Process Control

The MSP430F2618TPN can serve as the local controller in a process-control loop that reads a sensor, evaluates the measurement, and drives an analog control signal. The 12-bit ADC supports process-variable acquisition, the dual 12-bit DACs can generate control outputs, and the 16 MHz CPU16 core executes the control algorithm. Its 116 KB flash provides room for application code and configuration data, while 8 KB of SRAM supports working state and buffering. I2C or SPI can connect remote sensors, and UART can report operating information. Designers should verify output settling, sampling timing, and fail-safe behavior in the device documentation before assigning outputs to safety-critical functions.

🖥️

Low-Power Data Logger

The MSP430F2618TPN is appropriate for a low-power data logger that periodically records analog measurements and later transfers them to a host. The 12-bit ADC captures sensor data, the 116 KB flash stores firmware and may provide local nonvolatile storage, and the 8 KB SRAM handles temporary buffers and operating state. UART offers a straightforward connection to a computer or communications module, while SPI and I2C support flash storage and additional sensors. DMA can improve transfer efficiency, and the hardware multiplier helps implement scaling and filtering. A practical design must control peripheral power, wake sources, and retention behavior while ensuring that logged data is written safely.

🧩

Sensor Interface Hub

The MSP430F2618TPN can act as a sensor-interface hub when several mixed-signal and digital functions must be coordinated. Its 12-bit ADC acquires analog sensor information, the two 12-bit DACs support stimulus or calibration outputs, and the CPU16 core normalizes the readings. I2C is suitable for low-speed sensors, SPI supports faster peripherals, and UART provides a host or service interface. DMA reduces processor load during transfers, while the hardware multiplier accelerates digital arithmetic. The 80-pin LQFP offers extensive I/O for status indicators, configuration inputs, and external interface logic. Firmware should include range checks, sensor fault detection, and recalibration paths because the MCU alone cannot establish sensor accuracy.

📡

Precision Control and Signal Generation

The MSP430F2618TPN is suitable for compact control systems that combine sampled feedback with programmable analog drive. The two 12-bit DACs can represent a command or calibrated output, the 12-bit ADC can close the measurement loop, and the 16 MHz CPU16 core can calculate corrections. The hardware multiplier improves the efficiency of filtering and fixed-point control calculations, while DMA supports efficient data movement. Serial interfaces permit configuration, diagnostics, and coordination with external modules. Because the controller shares an 80-pin LQFP package, the design must carefully separate analog and digital paths, use a stable reference strategy, and verify timing and output-drive limitations directly from the manufacturer documentation.

おすすめ製品の概要

MSP430F2618TPN Texas Instruments 使用用途: Industrial Sensor Acquisition, Programmable Test and Measurement, Industrial Process Control, Low-Power Data Logger, Sensor Interface Hub, Precision Control and Signal Generation MSP430F2618T Related 80-LQFP device option 使用用途: Industrial Sensor Acquisition, Programmable Test and Measurement, Industrial Process Control, Low-Power Data Logger, Sensor Interface Hub, Precision Control and Signal Generation
What are the key specifications of MSP430F2618TPN that engineers should know?
The MSP430F2618TPN combines a 16 MHz MSP430 CPU16 core, 116 KB of flash memory, 8 KB of SRAM, one 12-bit ADC, two 12-bit DACs, and I2C, SPI, and UART interfaces. Texas Instruments also identifies hardware multiplier and DMA support in the device family. The controller is offered in an 80-pin LQFP package measuring 12 mm by 12 mm. According to the Texas Instruments MSP430F2618 product page, these resources support low-power embedded control, analog measurement, and analog output from one mixed-signal MCU.
What is the MSP430F2618TPN and what does it do?
The MSP430F2618TPN is a 16-bit mixed-signal microcontroller for embedded measurement and control systems. Its 16 MHz MSP430 CPU16 executes control software from 116 KB of flash while using 8 KB of SRAM, and its analog peripherals include a 12-bit ADC plus two 12-bit DACs. According to the Texas Instruments MSP430F2618 product page, I2C, SPI, UART, hardware multiplier, and DMA resources enable compact designs that acquire, process, communicate, and generate analog signals.
Where can I download the MSP430F2618TPN datasheet PDF?
The official MSP430F2618TPN datasheet and ordering information are available on the Texas Instruments product page linked from this record, while the family documentation is titled for MSP430F261x and MSP430F241x mixed-signal microcontrollers. According to the manufacturer part-details result, the datasheet is available as both PDF and HTML. Use the Texas Instruments datasheet for the complete pin-description table, electrical characteristics, timing information, and package drawings before laying out the 80-pin LQFP PCB.
Where can I find the MSP430F2618TPN pinout and 80-pin LQFP footprint?
The MSP430F2618TPN pinout is documented in the manufacturer pin-description table and package drawing for the MSP430F261x and MSP430F241x mixed-signal microcontrollers. The verified ordering information identifies an 80-pin LQFP package with a 12 mm by 12 mm body and gull-wing terminals. Use the datasheet when assigning multiplexed port functions, analog pins, supply pins, grounds, and programming signals; this record does not reproduce the complete 80-pin map because the search results do not expose every pin name.
What memory and analog resources does the MSP430F2618TPN provide?
The MSP430F2618TPN provides 116 KB of flash, organized as 116K x 8 plus 256 bytes, and 8 KB of SRAM. Its analog resources include one 12-bit ADC and two 12-bit DACs. According to the Texas Instruments product page, these peripherals operate alongside a 16 MHz CPU16 core and communication interfaces. The combination is useful for sensor acquisition, programmable references, industrial control loops, and compact instruments where analog conversion and digital processing share the same package.
MSP430F2618TPN vs MSP430F2618T - which one should be selected?
Choose MSP430F2618TPN when the design specifically requires the 80-pin LQFP ordering code identified in the Texas Instruments part-details listing; evaluate MSP430F2618T only after checking its complete orderable details. A replacement listing describes MSP430F2618T as an equivalent with an LQFP-80 package and similar features, but the available search results do not establish every temperature, packing, or lifecycle attribute. Confirm the manufacturer ordering table before treating either ordering code as a drop-in procurement substitution.
Is MSP430F2618TPN suitable for industrial sensor acquisition systems?
Yes, the MSP430F2618TPN fits industrial sensor-acquisition designs that need local analog conversion and embedded processing. Its 12-bit ADC measures sensor outputs, while two 12-bit DACs can provide control or reference voltages, and the 16 MHz CPU16 core can process the acquired data. The I2C, SPI, and UART interfaces support external sensors and communications. According to the manufacturer product page, the device is also listed as industrial grade in distributor package metadata.
When should I choose MSP430F2618TPN instead of a smaller microcontroller?
Choose the MSP430F2618TPN when the board requires several mixed-signal resources in one package: a 12-bit ADC, two 12-bit DACs, 116 KB of flash, 8 KB of SRAM, and three named serial interface types. A smaller MCU may be sufficient for simple digital control but can require external converters and additional glue logic. Conversely, a larger controller may be unnecessary if the application does not use the integrated analog functions or the substantial 80-pin peripheral complement.
Can MSP430F2618TPN replace MSP430F2618TPNR on the same PCB?
MSP430F2618TPNR is listed as the tape-and-reel ordering form of the same MSP430F2618 device in an 80-pin LQFP package, so its electrical core and package family align with MSP430F2618TPN. The principal ordering difference is delivery format rather than a change in CPU frequency, flash, SRAM, ADC, DAC, or interface resources. Nevertheless, procurement teams should confirm the exact suffix, temperature grade, packing method, and lifecycle status in the Texas Instruments ordering table before exchanging the parts.
What can replace MSP430F2618TPN without changing the PCB footprint?
The closest documented replacement is MSP430F2618TPNR because the manufacturer-related listing identifies the same 16 MHz MSP430F2618 core, 116 KB flash, 8 KB SRAM, 12-bit ADC, dual 12-bit DAC, and 80-pin LQFP format. It is primarily a reel-packed ordering option of the same device rather than a different silicon type. For an independent second source, the available cross-reference results do not establish a pin-compatible part, so changing devices would require a complete engineering review.
Is MSP430F2618TPN the same as an MSP430F5515IPNR?
No, the MSP430F2618TPN and MSP430F5515IPNR should not be treated as the same device without migration work. The verified MSP430F2618TPN information identifies an 80-pin LQFP package, while the comparison result explicitly names MSP430F5515IPNR as a different product. Their architecture, memory organization, peripherals, package dimensions, and pin assignments must be compared through their respective manufacturer documents. A board redesign and firmware reassessment are the safe baseline for such a migration.
Where can I buy MSP430F2618TPN online and check its availability?
Use the Request a Quote form on this page to request MSP430F2618TPN availability, current commercial terms, and a delivery commitment for the exact 80-pin LQFP ordering code. The verified listings include manufacturer ordering information and distributor product pages, but the public snippets do not provide a dependable quantity-break table for this exact suffix. Confirm the requested quantity, packaging requirement, manufacturing traceability needs, and expected lead time before releasing an order.
What is the price of MSP430F2618TPN?
The current commercial price for MSP430F2618TPN should be obtained through the Request a Quote form on this page. A public listing displays a starting figure, but it does not provide the quantity-break structure required to treat that figure as a stable unit-price schedule. The form lets buyers request pricing for the required quantity while preserving the distinction between the exact MSP430F2618TPN suffix and related reel-packed or differently suffixed MSP430F2618 ordering codes.
What is the lead time and stock status for MSP430F2618TPN?
Request the current lead time, minimum order quantity, and stock allocation for MSP430F2618TPN using the Request a Quote form on this page. The verified product results show ordering channels for the part, but they do not establish a consistent, current stock position or a manufacturer lead-time commitment in the snippets. Buyers should state the required quantity, delivery date, and package preference so the response reflects the exact MSP430F2618TPN ordering code rather than a related suffix.
How much power does the MSP430F2618TPN consume?
The MSP430F2618TPN is designed for low-power embedded operation, but the available product snippets do not provide numerical supply-current figures or operating modes for this exact ordering code. Use the manufacturer datasheet to compare active current, standby current, and shutdown current under the specified clock, voltage, and peripheral conditions. Actual board consumption also depends on flash wait states, ADC and DAC activity, serial-interface loading, and the behavior of the firmware during idle periods.
Does the MSP430F2618TPN support DMA, a hardware multiplier, and SPI?
Yes, the MSP430F2618TPN includes DMA, a hardware multiplier, and SPI along with I2C and UART. The Texas Instruments MSP430F2618 product page explicitly identifies these resources in addition to the 16 MHz CPU16 core, 116 KB flash, 8 KB SRAM, 12-bit ADC, and dual 12-bit DAC. DMA can offload data movement, the multiplier supports efficient arithmetic, and SPI supports high-speed peripherals, but the shared pin multiplexing and peripheral configuration must be planned from the manufacturer pin and reference information.

エンジニアリング参考データ: MSP430F2618TPN — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MSP430F2618TPN for a new 80-pin LQFP design that requires the documented MSP430F2618 feature set: a 16 MHz CPU16 core, 116 KB of flash, 8 KB of SRAM, one 12-bit ADC, two 12-bit DACs, I2C, SPI, UART, a hardware multiplier, and DMA. MSP430F2618T is the closest identified related ordering code for footprint-oriented sourcing, but procurement must confirm its exact suffix attributes before substitution. MSP430F2618TPNR is useful when reel-packed delivery is required and is based on the same listed core and 80-LQFP platform. Do not substitute a microcontroller merely because it also has a 16-bit core or ADC; memory size, pin multiplexing, package drawing, voltage requirements, peripheral behavior, and firmware assumptions must match. For a genuinely independent second source, no pin-compatible cross-brand alternative is established here, so treat migration as a redesign rather than a drop-in exchange.

代替品との比較

パラメータ この製品 MSP430F2618T
Brand Texas Instruments Texas Instruments
Package 80-pin LQFP (PN), 12 mm x 12 mm 80-pin LQFP
CPU Architecture 16-bit RISC MSP430 CPU16 MSP430 CPU16
Maximum CPU Frequency 16 MHz 16 MHz
Flash Memory 116 KB (116K x 8 + 256 B) 116 KB
SRAM 8 KB 8 KB
ADC One 12-bit ADC 12-bit ADC
DAC Dual 12-bit DAC Dual 12-bit DAC
Serial Interfaces I2C, SPI, and UART I2C, SPI, and UART
Data-Movement Features Hardware multiplier and DMA Hardware multiplier and DMA

主な差別化要因

  • Integrated dual analog output capability (vs MSP430F2618T)
  • Substantial flash allocation for embedded control code (vs MSP430F2618T)
  • Three named serial interface families (vs MSP430F2618T)

設計ノート

Treat the ADC and DAC paths as sensitive analog nets even though the MSP430F2618TPN integrates them with the digital controller. Route analog inputs away from high-speed switching and SPI return currents, use a compact analog ground region where appropriate, and place input filtering capacitors at the signal source rather than allowing long traces to act as antennas. Confirm every multiplexed analog and digital function against the manufacturer pin-description table before finalizing the 80-pin LQFP land pattern.

Place the required supply and reference capacitors directly beside their associated pins, with the shortest practical ground-return paths. Because this is an 80-pin LQFP, pin escape density can create routing pressure; assign the high-speed SPI signals, UART lines, ADC inputs, and reference connections early. Review the manufacturer recommended PCB layout and package drawing for exposed thermal-pad treatment, solder-mask clearance, and land-pattern dimensions rather than deriving the footprint solely from the 12 mm by 12 mm body size.

Do not assume that related MSP430F2618 ordering suffixes are identical without checking the manufacturer ordering table. MSP430F2618TPNR is identified as a reel-packed ordering option, while other device codes can represent different packaging, qualification, or temperature arrangements. Likewise, a nominal 16-bit DAC or ADC does not guarantee full-scale accuracy, linearity, or reference stability; verify acquisition time, output settling, and operating conditions for the actual analog circuit before production release.

Estimate the average supply current from the firmware workload rather than using the highest active-mode figure for every duty cycle. Account separately for CPU execution, ADC conversion, DAC output states, SPI and UART activity, flash wait states, and the duration of idle periods. Then size the regulator and local decoupling for both average demand and transient activity. The available snippets identify the MSP430 architecture as ultra-low-power but do not provide the numerical operating-mode currents needed for a final power budget.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The verified product snippets identify the device as industrial grade but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because the component is a general-purpose industrial microcontroller and no automotive qualification is identified.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MSP430F2618TPN datasheet MSP430F2618TPN datasheet pdf MSP430F2618TPN pinout MSP430F2618TPN specifications Texas Instruments MSP430F2618TPN MSP430F2618TPN 80-LQFP MSP430F2618TPN equivalent MSP430F2618TPN replacement MSP430F2618TPN vs MSP430F2618T MSP430F2618TPN ADC DAC application MSP430F2618TPN price MSP430F2618TPN stock

関連部品&用語

Texas Instruments MSP430F2618TPN MSP430F2618 MSP430F2618T MSP430F2618TPNR MSP430 CPU16 mixed-signal microcontroller microcontroller embedded controller 16-bit RISC 116 KB flash 8 KB SRAM 12-bit ADC 12-bit DAC I2C SPI UART hardware multiplier DMA 80-pin LQFP LQFP package surface-mount package industrial sensor acquisition industrial process control
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示