Texas Instruments

MSP430F4260IDL - 8MHz 16-Bit Sensing MCU | Texas Instruments

MPN: MSP430F4260IDL ✓ सक्रिय
1.8 V to 3.6 V Vdss 250 µA at 1 MHz and 2.2 V Id 48-pin SSOP (DL), 7.50 mm width Package 8 MHz Speed 24 KB (24K × 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

MSP430F4260IDL अवलोकन

The Texas Instruments MSP430F4260IDL is an 8 MHz, 16-bit sensing microcontroller with 24 KB of flash memory, 256 bytes of RAM, one 16-bit sigma-delta ADC, a 12-bit DAC, and a 56-segment LCD driver in a 48-pin SSOP (DL) package. It operates from 1.8 V to 3.6 V and is designed for low-power embedded measurement, control, and display applications.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The MSP430 family uses a 16-bit RISC architecture, and the MSP430F4260 belongs to the MSP430x4xx platform of mixed-signal, ultra-low-power devices. Its sensing and display resources allow a product to acquire an analog signal, process it digitally, and present information on an LCD without requiring several separate components.

The principal features include an operating frequency of 8 MHz, 24K × 8 flash plus 256 bytes of RAM, one 16-bit sigma-delta ADC, and a 12-bit DAC. A 56-segment LCD driver supports segmented-display instruments. The device also provides 32 I/O functions according to the MSP430F4260IDL product listing. Active-mode consumption is 250 µA at 1 MHz and 2.2 V, while standby consumption is 1.1 µA and off-mode consumption with RAM retention is 0.1 µA.

The MSP430 architecture supports five power-saving modes and can wake from standby in less than 6 µs. This combination is useful in instruments that spend most of their operating life waiting for a measurement event. The 16-bit sigma-delta ADC is suited to sensing relatively slow or high-resolution analog signals, while the 12-bit DAC supports controlled analog output. Exact peripheral timing, ADC acquisition characteristics, and pin multiplexing should be confirmed in the MSP430F4260 manufacturer datasheet before schematic capture.

Typical uses include industrial panel meters, portable environmental monitors, laboratory instruments, handheld testers, and low-power sensor nodes. The LCD driver is particularly useful for instruments that need a local numeric or graphical display, while the ADC and DAC support excitation, measurement, calibration, and output-control functions. Firmware can use the low-power modes to reduce energy use between measurement cycles.

The main design consideration is preserving low-power behavior across the complete measurement cycle. Place decoupling capacitors close to the supply pins, route analog and digital return currents carefully, and confirm the external-component recommendations in the manufacturer datasheet. A 48-pin SSOP also requires adequate PCB assembly clearance and pin-copper geometry, particularly in compact production designs.

This product page consolidates the manufacturer’s core device specifications, package and memory details, low-power characteristics, commercial sourcing path, and design guidance. It also distinguishes confirmed parameters from details that require verification during component validation, helping engineers plan sensing, firmware, PCB layout, and procurement with fewer repeated document checks.

के लिए ड्रॉप-इन विकल्प MSP430F4260IDL — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

MSP430F4260IDL Maximum Ratings और Electrical Characteristics

CPU Architecture 16-bit RISC
अधिकतम क्लॉक फ़्रीक्वेंसी 8 MHz
Flash Memory 24 KB (24K × 8)
RAM 256 bytes
Sigma-Delta ADC 1 × 16-bit
DAC 1 × 12-bit
LCD Drive Capability 56 segments
I/O Functions 32
Supply Voltage Range 1.8 V to 3.6 V
Active-Mode Current 250 µA at 1 MHz and 2.2 V
Standby-Mode Current 1.1 µA
Off-Mode Current 0.1 µA with RAM retention
Standby Wake-Up Time Less than 6 µs
Power-Saving Modes 5 modes
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C
पैकेज 48-pin SSOP (DL), 7.50 mm width
Terminal Count 48 pins
RoHS स्थिति unknown

MSP430F4260IDL 48-pin ssop (dl), 7.50 mm width पिन कॉन्फ़िगरेशन गाइड

MSP430F4260IDL (48-pin ssop (dl), 7.50 mm width पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

MSP430F4260IDL के लिए 48-pin ssop (dl), 7.50 mm width पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MSP430F4260IDL.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MSP430F4260IDL के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Panel Meter, Portable Environmental Monitor, Handheld Test Instrument, Battery-Powered Sensor Node, Laboratory Signal Generator, Low-Power Data Acquisition Unit.

🏭

Industrial Panel Meter

The MSP430F4260IDL fits an industrial panel meter because it combines a 16-bit sigma-delta ADC, a 12-bit DAC, and a 56-segment LCD driver in one 48-pin SSOP device. The ADC can acquire a conditioned sensor signal, while the LCD driver supports a local numeric display without a separate display controller. Its 1.1 µA standby current allows the instrument to wake in less than 6 µs for measurement updates. Designers should budget sufficient flash for calibration and signal processing and confirm the LCD glass and segment mapping against the manufacturer datasheet.

🧩

Portable Environmental Monitor

The MSP430F4260IDL is appropriate for a battery-powered environmental monitor that periodically samples an analog sensor and stores or reports the result. Its 16-bit sigma-delta ADC suits precision measurement, while five low-power modes reduce consumption during idle intervals. Active current is 250 µA at 1 MHz and 2.2 V, standby current is 1.1 µA, and standby wake-up occurs in less than 6 µs. These values support a duty-cycled design, although sensor current, display use, and regulator quiescent current may dominate the final battery budget.

🔧

Handheld Test Instrument

The MSP430F4260IDL can serve as the control center of a handheld test instrument that measures analog quantities and provides local feedback. The integrated 16-bit sigma-delta ADC supports high-resolution acquisition, the 12-bit DAC can generate a controlled reference or excitation output, and the 56-segment LCD driver supports an integrated display. Its 256 bytes of RAM and 24 KB flash require careful firmware sizing, but they are sufficient for focused measurement routines, calibration tables, and compact user-interface code.

📱

Battery-Powered Sensor Node

The MSP430F4260IDL supports a compact, duty-cycled sensor node that wakes periodically to sample an analog condition. Its 16-bit sigma-delta ADC reduces the need for separate high-resolution conversion circuitry, while low-power standby operation at 1.1 µA and off-mode operation at 0.1 µA with RAM retention help preserve data between events. The 1.8 V minimum supply voltage suits low-energy systems, but the complete power budget must include the sensor, radio or storage element, regulator efficiency, and the energy required during startup and conversion.

📟

Laboratory Signal Generator

The MSP430F4260IDL can control a small precision signal source when a system requires both an analog measurement and a controlled output. The 12-bit DAC provides the output path, while the 16-bit sigma-delta ADC can support calibration or closed-loop monitoring. A 56-segment LCD can present the selected level and operating state. For waveform-accurate instrumentation, engineers must verify DAC resolution, update behavior, settling requirements, reference accuracy, and available timer resources in the manufacturer datasheet before fixing the signal-chain specifications.

🖥️

Low-Power Data Acquisition Unit

The MSP430F4260IDL is useful in a compact data-acquisition unit where an analog signal must be sampled, processed, and presented locally. Its 16-bit sigma-delta ADC provides a high-resolution sensing interface, and the integrated LCD driver simplifies standalone instrumentation. The 24 KB flash supports embedded acquisition and control firmware, while standby operation can be used between trigger events. Designers should evaluate sampling bandwidth, external analog conditioning, memory requirements, and communication-resource availability rather than treating the sigma-delta ADC as a general-purpose high-speed converter.

What is the MSP430F4260IDL?
The MSP430F4260IDL is an 8 MHz, 16-bit ultra-low-power sensing microcontroller from Texas Instruments. It integrates 24 KB of flash, 256 bytes of RAM, one 16-bit sigma-delta ADC, a 12-bit DAC, a 56-segment LCD driver, and 32 I/O functions in a 48-pin SSOP package. According to the TI product page, it is intended for compact sensing, measurement, and control systems operating from 1.8 V to 3.6 V.
What are the key specifications of MSP430F4260IDL?
The MSP430F4260IDL combines an 8 MHz 16-bit RISC core with 24 KB of flash and 256 bytes of RAM. Its mixed-signal resources include one 16-bit sigma-delta ADC, one 12-bit DAC, and a 56-segment LCD driver, while the product listing identifies 32 I/O functions. The manufacturer datasheet also specifies a 1.8 V to 3.6 V supply range, five low-power modes, and a -40 °C to +85 °C industrial temperature range.
Where can I download the MSP430F4260IDL datasheet PDF?
The official MSP430F4260 product page is the preferred source for the manufacturer’s datasheet and supporting documentation. Texas Instruments describes the MSP430F4260 family as an 8 MHz sensing MCU with a 16-bit sigma-delta ADC, 12-bit DAC, 56-segment LCD, 24 KB flash, and 256 bytes of RAM. Use the product page rather than third-party copies so that pin descriptions, electrical limits, and ordering information match the current manufacturer documentation.
Where can I find the MSP430F4260IDL pinout?
The MSP430F4260IDL uses a 48-pin SSOP (DL) package, and its authoritative pin assignments are shown in the pin-description tables of the TI MSP430F4260 manufacturer datasheet. Use that table when assigning multiplexed ADC, DAC, LCD, communications, and general-purpose I/O functions. The available product listing confirms the 48-pin package and -40 °C to +85 °C temperature grade but does not reproduce the complete numbered pin map.
How much power does the MSP430F4260IDL consume?
The MSP430F4260IDL consumes 250 µA in active mode at 1 MHz and 2.2 V. Standby current is 1.1 µA, while off-mode current with RAM retention is 0.1 µA. According to the MSP430F4260IDL datasheet information, the device also supports five power-saving modes and wakes from standby in less than 6 µs, making event-driven operation practical for battery-powered measurement products.
Is MSP430F4260IDL suitable for a low-power sensor node?
Yes, the MSP430F4260IDL is suitable for low-power sensor nodes that require local analog measurement and low-duty-cycle operation. Its 16-bit sigma-delta ADC supports high-resolution sensing, while the five low-power modes and standby wake-up time of less than 6 µs help minimize energy use between events. The 1.8 V to 3.6 V operating range also supports low-voltage battery-derived systems when the regulator and peripheral loads are designed accordingly.
Can MSP430F4260IDL drive a segmented LCD?
Yes, the MSP430F4260IDL includes a 56-segment LCD driver. This allows a measurement instrument to display locally measured values without using a separate display controller when its segment arrangement is compatible with the supported LCD drive architecture. The TI product page identifies the 56-segment LCD as a defining feature. Segment mapping, common-line requirements, and glass compatibility must still be checked against the manufacturer datasheet.
What is the difference between MSP430F4260IDL and MSP430F4260IDLR?
The MSP430F4260IDL and MSP430F4260IDLR both identify a 48-pin SSOP version of the MSP430F4260 with the same 8 MHz core, 24 KB flash, 256 bytes of RAM, sigma-delta ADC, DAC, and 56-segment LCD. Their ordering suffixes distinguish delivery packaging: IDL is the tube-packaged ordering option, while IDLR is the tape-and-reel option. Firmware and electrical function remain associated with the same device family.
What is the best drop-in replacement for MSP430F4260IDL?
No independently confirmed pin-to-pin drop-in replacement for the MSP430F4260IDL has been established. MSP430F4260IDLR has the same 48-pin SSOP device and electrical function but changes the orderable packaging from tube to tape and reel, so it is not a useful board-level substitution when the required delivery format differs. Before redesigning around another MCU family, compare memory, ADC architecture, LCD drive, package pins, firmware, and qualification requirements.
What can replace MSP430F4260IDL on an existing PCB?
The closest confirmed same-device option is MSP430F4260IDLR, which retains the 48-pin SSOP format and the same MSP430F4260 core and peripheral configuration. It is primarily an alternate packaging code rather than a different silicon function. A replacement from another MCU family should not be treated as drop-in unless its 48-pin SSOP pinout, power behavior, ADC/DAC resources, LCD interface, clocking, and firmware requirements are verified independently.
When should I choose MSP430F4260IDL over another sensing MCU?
Choose the MSP430F4260IDL when a design needs a 16-bit low-power MCU, a 16-bit sigma-delta ADC, a 12-bit DAC, and a 56-segment LCD driver in the same 48-pin SSOP device. Its 24 KB flash and 256 bytes of RAM suit compact embedded control firmware, and standby operation at 1.1 µA supports duty-cycled instruments. Choose another MCU when it offers more memory, faster processing, broader I/O, or a different display architecture.
Is MSP430F4260IDL the same as MSP430F4260IDLR?
The MSP430F4260IDL and MSP430F4260IDLR are the same MSP430F4260 device configuration offered with different orderable packaging. Both are listed in a 48-pin SSOP (DL) package with an 8 MHz core, 24 KB flash, 256 bytes of RAM, one 16-bit sigma-delta ADC, one 12-bit DAC, and a 56-segment LCD driver. The distinction is the physical packing format used for production handling and assembly.
Is MSP430F4260IDL available in stock?
Current stock and delivery commitments should be confirmed through the Request a Quote form on this page. The MSP430F4260IDL is listed by major component distributors, and one archived market listing showed inventory when checked, but inventory levels can change quickly. Submit the required quantity, package preference, target date, and delivery location in the quote request for the most relevant availability response.
What is the price of MSP430F4260IDL?
The current unit price for MSP430F4260IDL should be requested through the Request a Quote form on this page. Pricing depends on quantity, order frequency, package format, and current market conditions, so a static figure can become obsolete quickly. Include your production quantity and requested delivery date in the inquiry to receive a quote tied to the actual order requirements.
What is the lead time for MSP430F4260IDL?
The lead time for MSP430F4260IDL should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, packaging selection, component availability, and production scheduling. The form allows buyers to state their required quantity and target delivery date, allowing the supplier to respond with the applicable schedule rather than presenting a generic inventory estimate.
How do I design the power and layout for MSP430F4260IDL?
Design the MSP430F4260IDL around its 1.8 V to 3.6 V operating range and the component recommendations in the TI manufacturer datasheet. Place supply-decoupling capacitors close to the relevant device pins, keep analog and digital return paths controlled, and confirm pin multiplexing before assigning external circuitry. The 48-pin SSOP package also requires production-board geometry that supports adequate solder joints and assembly inspection.

के लिए इंजीनियरिंग संदर्भ डेटा MSP430F4260IDL — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MSP430F4260IDL when a compact instrument must combine a 16-bit low-power MCU, a 16-bit sigma-delta ADC, a 12-bit DAC, and a 56-segment LCD driver. Its 1.8 V to 3.6 V supply range, 1.1 µA standby current, and less-than-6 µs standby wake-up time make it especially suitable for portable meters and duty-cycled sensor products. Retain this device when an existing board requires its MSP430 architecture, memory organization, LCD arrangement, and software ecosystem. A different MCU is warranted when the design needs substantially more flash or RAM, faster execution, a more capable communications peripheral, or a different analog-conversion architecture. Before replacing it, verify the complete 48-pin SSOP pinout, operating voltage, ADC and DAC capabilities, LCD timing, power modes, package, and firmware dependencies rather than relying on device category or clock speed alone.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Package 48-pin SSOP (DL)
Brand Texas Instruments
Maximum Clock Frequency 8 MHz
CPU Architecture 16-bit RISC
Flash Memory 24 KB
RAM 256 bytes
ADC 1 × 16-bit sigma-delta
DAC 1 × 12-bit
LCD Driver 56 segments
Supply Voltage Range 1.8 V to 3.6 V
Operating Temperature Range -40 °C to +85 °C

डिज़ाइन नोट्स

Base the power budget on the stated operating modes: 250 µA active at 1 MHz and 2.2 V, 1.1 µA standby, and 0.1 µA off mode with RAM retention. Add sensor, display, regulator, and communication currents to obtain the real average consumption. Avoid selecting the 8 MHz operating point unless processing time justifies its higher active demand; use a lower clock during measurement and standby intervals when the application permits.

Place the required bypass capacitors immediately beside the associated supply and ground pins, and keep the analog input route short and away from switching nodes. Because the MSP430F4260IDL combines ADC, DAC, LCD, and digital I/O in a 48-pin SSOP, review pin multiplexing before assigning external analog components. Follow the manufacturer datasheet land pattern and assembly guidance rather than treating the package as a generic 48-pin footprint.

Treat the analog front end and the 16-bit sigma-delta ADC as one signal-chain design. Confirm the required input bandwidth, settling behavior, reference arrangement, and source impedance in the manufacturer datasheet. Keep the analog return path continuous and use the device ground pins according to the recommended layout. If the 12-bit DAC drives external circuitry, verify its output settling and load requirements before enabling high update rates.

Do not assume that 24 KB of flash and 256 bytes of RAM are interchangeable with the memory resources of another MCU family. A cross-family redesign may also require different startup code, linker placement, ADC calibration, LCD timing, and pin assignments. Keep the original MSP430F4260IDL footprint and function when possible, and validate the complete power-up, measurement, display, and sleep sequence on hardware.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer product listing identifies the MSP430F4260IDL as an industrial-temperature component, but no RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was specified. Confirm the relevant compliance documents before qualification.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MSP430F4260IDL MSP430F4260IDL datasheet MSP430F4260IDL datasheet pdf MSP430F4260IDL pinout MSP430F4260IDL specifications MSP430F4260 48 pin SSOP MSP430F4260IDL price MSP430F4260IDL stock MSP430F4260IDL replacement MSP430F4260IDL equivalent Texas Instruments MSP430F4260IDL MSP430F4260IDL ADC LCD DAC

संबंधित कंपोनेंट्स और शब्द

Texas Instruments MSP430F4260IDL MSP430F4260IDLR MSP430F4260 MSP430 MSP430x4xx microcontroller embedded microcontroller 16-bit RISC sigma-delta ADC 12-bit DAC 56-segment LCD ultra-low-power MCU semiconductor SSOP-48 DL package surface mount 1.8 V to 3.6 V power supply standby current active current flash memory RAM industrial panel meter battery-powered sensor node
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें