MSP430F4260IDL - 8MHz 16-Bit Sensing MCU | Texas Instruments
MPN: MSP430F4260IDL ✓ نشطMSP430F4260IDL نظرة عامة
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The MSP430 family uses a 16-bit RISC architecture, and the MSP430F4260 belongs to the MSP430x4xx platform of mixed-signal, ultra-low-power devices. Its sensing and display resources allow a product to acquire an analog signal, process it digitally, and present information on an LCD without requiring several separate components.
The principal features include an operating frequency of 8 MHz, 24K × 8 flash plus 256 bytes of RAM, one 16-bit sigma-delta ADC, and a 12-bit DAC. A 56-segment LCD driver supports segmented-display instruments. The device also provides 32 I/O functions according to the MSP430F4260IDL product listing. Active-mode consumption is 250 µA at 1 MHz and 2.2 V, while standby consumption is 1.1 µA and off-mode consumption with RAM retention is 0.1 µA.
The MSP430 architecture supports five power-saving modes and can wake from standby in less than 6 µs. This combination is useful in instruments that spend most of their operating life waiting for a measurement event. The 16-bit sigma-delta ADC is suited to sensing relatively slow or high-resolution analog signals, while the 12-bit DAC supports controlled analog output. Exact peripheral timing, ADC acquisition characteristics, and pin multiplexing should be confirmed in the MSP430F4260 manufacturer datasheet before schematic capture.
Typical uses include industrial panel meters, portable environmental monitors, laboratory instruments, handheld testers, and low-power sensor nodes. The LCD driver is particularly useful for instruments that need a local numeric or graphical display, while the ADC and DAC support excitation, measurement, calibration, and output-control functions. Firmware can use the low-power modes to reduce energy use between measurement cycles.
The main design consideration is preserving low-power behavior across the complete measurement cycle. Place decoupling capacitors close to the supply pins, route analog and digital return currents carefully, and confirm the external-component recommendations in the manufacturer datasheet. A 48-pin SSOP also requires adequate PCB assembly clearance and pin-copper geometry, particularly in compact production designs.
This product page consolidates the manufacturer’s core device specifications, package and memory details, low-power characteristics, commercial sourcing path, and design guidance. It also distinguishes confirmed parameters from details that require verification during component validation, helping engineers plan sensing, firmware, PCB layout, and procurement with fewer repeated document checks.
بدائل مباشرة لـ MSP430F4260IDL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلMSP430F4260IDL الحدود القصوى والخصائص الكهربائية
| CPU Architecture | 16-bit RISC |
| أقصى تردد للساعة | 8 MHz |
| Flash Memory | 24 KB (24K × 8) |
| RAM | 256 bytes |
| Sigma-Delta ADC | 1 × 16-bit |
| DAC | 1 × 12-bit |
| LCD Drive Capability | 56 segments |
| I/O Functions | 32 |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Active-Mode Current | 250 µA at 1 MHz and 2.2 V |
| Standby-Mode Current | 1.1 µA |
| Off-Mode Current | 0.1 µA with RAM retention |
| Standby Wake-Up Time | Less than 6 µs |
| Power-Saving Modes | 5 modes |
| نطاق درجة حرارة التشغيل | -40 °C to +85 °C |
| العلبة | 48-pin SSOP (DL), 7.50 mm width |
| Terminal Count | 48 pins |
| حالة RoHS | unknown |
دليل تكوين أطراف MSP430F4260IDL 48-pin ssop (dl), 7.50 mm width
تكوين الأطراف لـ MSP430F4260IDL (حزمة 48-pin ssop (dl), 7.50 mm width). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MSP430F4260IDL.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MSP430F4260IDL مناسب لـ 6 التطبيقs: Industrial Panel Meter, Portable Environmental Monitor, Handheld Test Instrument, Battery-Powered Sensor Node, Laboratory Signal Generator, Low-Power Data Acquisition Unit.
Industrial Panel Meter
The MSP430F4260IDL fits an industrial panel meter because it combines a 16-bit sigma-delta ADC, a 12-bit DAC, and a 56-segment LCD driver in one 48-pin SSOP device. The ADC can acquire a conditioned sensor signal, while the LCD driver supports a local numeric display without a separate display controller. Its 1.1 µA standby current allows the instrument to wake in less than 6 µs for measurement updates. Designers should budget sufficient flash for calibration and signal processing and confirm the LCD glass and segment mapping against the manufacturer datasheet.
موصى به
Portable Environmental Monitor
The MSP430F4260IDL is appropriate for a battery-powered environmental monitor that periodically samples an analog sensor and stores or reports the result. Its 16-bit sigma-delta ADC suits precision measurement, while five low-power modes reduce consumption during idle intervals. Active current is 250 µA at 1 MHz and 2.2 V, standby current is 1.1 µA, and standby wake-up occurs in less than 6 µs. These values support a duty-cycled design, although sensor current, display use, and regulator quiescent current may dominate the final battery budget.
موصى به
Handheld Test Instrument
The MSP430F4260IDL can serve as the control center of a handheld test instrument that measures analog quantities and provides local feedback. The integrated 16-bit sigma-delta ADC supports high-resolution acquisition, the 12-bit DAC can generate a controlled reference or excitation output, and the 56-segment LCD driver supports an integrated display. Its 256 bytes of RAM and 24 KB flash require careful firmware sizing, but they are sufficient for focused measurement routines, calibration tables, and compact user-interface code.
موصى به
Battery-Powered Sensor Node
The MSP430F4260IDL supports a compact, duty-cycled sensor node that wakes periodically to sample an analog condition. Its 16-bit sigma-delta ADC reduces the need for separate high-resolution conversion circuitry, while low-power standby operation at 1.1 µA and off-mode operation at 0.1 µA with RAM retention help preserve data between events. The 1.8 V minimum supply voltage suits low-energy systems, but the complete power budget must include the sensor, radio or storage element, regulator efficiency, and the energy required during startup and conversion.
موصى به
Laboratory Signal Generator
The MSP430F4260IDL can control a small precision signal source when a system requires both an analog measurement and a controlled output. The 12-bit DAC provides the output path, while the 16-bit sigma-delta ADC can support calibration or closed-loop monitoring. A 56-segment LCD can present the selected level and operating state. For waveform-accurate instrumentation, engineers must verify DAC resolution, update behavior, settling requirements, reference accuracy, and available timer resources in the manufacturer datasheet before fixing the signal-chain specifications.
موصى به
Low-Power Data Acquisition Unit
The MSP430F4260IDL is useful in a compact data-acquisition unit where an analog signal must be sampled, processed, and presented locally. Its 16-bit sigma-delta ADC provides a high-resolution sensing interface, and the integrated LCD driver simplifies standalone instrumentation. The 24 KB flash supports embedded acquisition and control firmware, while standby operation can be used between trigger events. Designers should evaluate sampling bandwidth, external analog conditioning, memory requirements, and communication-resource availability rather than treating the sigma-delta ADC as a general-purpose high-speed converter.
موصى به
بيانات مرجعية هندسية لـ MSP430F4260IDL — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Package | 48-pin SSOP (DL) |
| Brand | Texas Instruments |
| Maximum Clock Frequency | 8 MHz |
| CPU Architecture | 16-bit RISC |
| Flash Memory | 24 KB |
| RAM | 256 bytes |
| ADC | 1 × 16-bit sigma-delta |
| DAC | 1 × 12-bit |
| LCD Driver | 56 segments |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Operating Temperature Range | -40 °C to +85 °C |
ملاحظات التصميم
Base the power budget on the stated operating modes: 250 µA active at 1 MHz and 2.2 V, 1.1 µA standby, and 0.1 µA off mode with RAM retention. Add sensor, display, regulator, and communication currents to obtain the real average consumption. Avoid selecting the 8 MHz operating point unless processing time justifies its higher active demand; use a lower clock during measurement and standby intervals when the application permits.
Place the required bypass capacitors immediately beside the associated supply and ground pins, and keep the analog input route short and away from switching nodes. Because the MSP430F4260IDL combines ADC, DAC, LCD, and digital I/O in a 48-pin SSOP, review pin multiplexing before assigning external analog components. Follow the manufacturer datasheet land pattern and assembly guidance rather than treating the package as a generic 48-pin footprint.
Treat the analog front end and the 16-bit sigma-delta ADC as one signal-chain design. Confirm the required input bandwidth, settling behavior, reference arrangement, and source impedance in the manufacturer datasheet. Keep the analog return path continuous and use the device ground pins according to the recommended layout. If the 12-bit DAC drives external circuitry, verify its output settling and load requirements before enabling high update rates.
Do not assume that 24 KB of flash and 256 bytes of RAM are interchangeable with the memory resources of another MCU family. A cross-family redesign may also require different startup code, linker placement, ADC calibration, LCD timing, and pin assignments. Keep the original MSP430F4260IDL footprint and function when possible, and validate the complete power-up, measurement, display, and sleep sequence on hardware.
معلومات الامتثال
The manufacturer product listing identifies the MSP430F4260IDL as an industrial-temperature component, but no RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was specified. Confirm the relevant compliance documents before qualification.