Texas Instruments

OPA197ID - 36V Precision RRI/O Op Amp | Texas Instruments

MPN: OPA197ID ✓ सक्रिय
36 V Vdss 8-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

OPA197ID अवलोकन

Texas Instruments OPA197ID is a single precision operational amplifier with a 36 V maximum supply, rail-to-rail input and rail-to-rail output, a 10 MHz gain-bandwidth product, and an 8-pin SOIC package. The device is designed for instrumentation and signal-chain applications that require accurate DC behavior, flexible input/output voltage range, and operation from low-voltage to relatively high supply levels. Its low-offset architecture is suited to sensors, current measurements, industrial converters, and precision analog front ends.

An operational amplifier is a high-gain differential voltage amplifier used to amplify small signals, buffer voltage sources, compare thresholds, and implement active analog filters. The OPA197 belongs to the precision operational amplifier hierarchy, where rail-to-rail input means the common-mode input can approach the supply rails while rail-to-rail output means the output can swing close to either rail under suitable load and output-current conditions. These characteristics simplify circuits that operate from single or split supplies.

The OPA197 combines rail-to-rail input and output with low offset voltage of ±25 µV typical and offset drift of ±0.25 µV/°C typical. Its 10 MHz gain-bandwidth product supports moderate-frequency signal processing, while the 36 V supply capability accommodates industrial and instrument power rails. The single-amplifier configuration reduces board area when only one independent gain stage is required.

The OPA197 is part of the OPAx197 family, which also includes dual and quad precision amplifier variants. The OPA197ID uses the standard 8-pin SOIC footprint, making it suitable for conventional through-hole assembly and PCB layouts that accommodate surface-mount SOIC packages. Pin 5 supplies the positive rail, pin 4 supplies the negative rail or ground, pins 3 and 4? are not interchangeable: pin 3 is the noninverting input and pin 4 is the inverting input, and pin 1 is the output.

Typical uses include precision sensor conditioning, industrial current measurement, high-voltage input dividers, low-level signal amplification, and active filtering. In instrumentation systems, the wide common-mode range can simplify conditioning around sensors operating near a supply rail. In audio and conversion systems, low offset and moderate bandwidth help preserve signal integrity without requiring a more specialized amplifier.

Designers should verify output swing, input common-mode limits, capacitive-load stability, and supply-current requirements under the intended load. Decoupling capacitors should be placed close to the supply pins, and sensitive feedback networks should use stable resistors and a compact layout to minimize offset and noise effects.

This OPA197ID product overview combines manufacturer specifications, package details, sourcing guidance, and application-oriented design considerations. It helps engineers identify whether the single-channel 36 V precision amplifier matches the voltage, accuracy, bandwidth, and footprint requirements of an analog signal chain.

के लिए ड्रॉप-इन विकल्प OPA197ID — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं OPA197ID (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Amplifier Type, Package, Gain Bandwidth Product, Gain-Bandwidth Product, Output Type.

Analog Devices
Amplifier Type: JFET
Gain Bandwidth Product: 16.3 MHz
Output Type: Rail-to-Rail
इसके साथ तुलना करें OPA197ID →
Analog Devices
Amplifier Type: JFET
Gain Bandwidth Product: 16.3 MHz
Output Type: Rail-to-Rail
इसके साथ तुलना करें OPA197ID →
Texas Instruments
Amplifier Type: Single operational amplifier
Package: 8-pin SOIC
Gain-Bandwidth Product: 10 MHz
इसके साथ तुलना करें OPA197ID →
Texas Instruments
Amplifier Type: Zero-Drift Precision Operational Amplifier
Package: 8-pin SOIC (D)
Gain Bandwidth Product: 14 MHz
इसके साथ तुलना करें OPA197ID →
Texas Instruments
Gain-Bandwidth Product: 2.5 MHz
इसके साथ तुलना करें OPA197ID →

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

OPA197ID Maximum Ratings और Electrical Characteristics

Amplifier Type Single operational amplifier
Maximum Supply Voltage 36 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Offset Voltage ±25 µV typical
Offset Voltage Drift ±0.25 µV/°C typical
Gain-Bandwidth Product 10 MHz
Channel Count 1 channel
ऑपरेटिंग तापमान रेंज -40 °C to +125 °C
पैकेज 8-pin SOIC
माउंटिंग प्रकार Surface mount
RoHS स्थिति Compliant
REACH Status unknown
AEC-Q100 Qualification unknown
Lead-Free Status unknown
Halogen-Free Status unknown

OPA197ID पिन कॉन्फ़िगरेशन

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
पिन 1 OUT — Operational-amplifier output
पिन 2 V- — Inverting input
पिन 3 V+ — Noninverting input
पिन 4 V- — Negative supply or ground
पिन 5 V+ — Positive supply
पिन 6 NC — Not connected
पिन 7 NC — Not connected
पिन 8 NC — Not connected

सामान्य अनुप्रयोग

OPA197ID के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Signal Conditioning, Precision Current Measurement, High-Voltage Industrial Signal Conditioning, Active Precision Filtering, Audio and Conversion Analog Front End, Portable Instrumentation and Test Equipment.

🏭

Industrial Sensor Signal Conditioning

OPA197ID fits precision sensor front ends that operate from a single supply and require an amplifier to remain useful near the positive rail. Its rail-to-rail input and output, ±25 µV typical offset, and ±0.25 µV/°C typical drift help preserve small sensor signals without moving the operating point far from the rails. The 10 MHz gain-bandwidth product also supports moderate-bandwidth filtering or gain stages around slow sensors. The design should still verify the actual input common-mode range, output swing, noise performance, and stability at the selected gain before production release.

⚡

Precision Current Measurement

OPA197ID is suitable for amplifying the small differential voltage produced by a current-sense element when the system needs accurate DC behavior and flexible input biasing. The ±25 µV typical offset limits the amplifier's intrinsic contribution to the measurement error, while the 10 MHz gain-bandwidth product provides bandwidth for ripple and transient components. Use the amplifier with suitable common-mode and supply arrangements, and confirm that the output remains within its rated swing under the maximum shunt current. Feedback resistance and compensation must be selected for the actual gain and shunt impedance.

🏭

High-Voltage Industrial Signal Conditioning

OPA197ID fits instrumentation circuits operating from higher supply rails because its manufacturer specification establishes a 36 V maximum supply capability. It can buffer or amplify sensor signals where a low-voltage amplifier would not provide sufficient input or output range. Rail-to-rail operation improves signal utilization near the rails, and the precision offset specification supports accurate processing of small industrial signals. Circuit designers must observe absolute maximum voltage limits, provide input protection as required, check output swing at the operating load, and maintain thermal margin in the surrounding analog section.

🔧

Active Precision Filtering

OPA197ID can implement active low-pass or band-pass stages where a 10 MHz gain-bandwidth product and low offset are useful. The 8-pin SOIC format supports conventional analog-board layouts, while the rail-to-rail input and output characteristics help preserve dynamic range in single-supply filter cascades. Set resistor and capacitor values for the intended closed-loop gain, then verify phase margin with the selected gain and load. Precision component tolerances and layout symmetry are especially important for low-frequency filters, where offset drift and component variation can shift the transfer function.

🎧

Audio and Conversion Analog Front End

OPA197ID can serve as a precision gain or buffer stage ahead of audio and data-conversion circuitry when the signal level is small and supply range is relatively high. Its low typical offset reduces DC error, and the 10 MHz bandwidth is sufficient for many audio-band and moderate-frequency conversion paths. Rail-to-rail operation increases flexibility in single-supply signal chains. Designers should avoid treating the bandwidth figure as a guaranteed closed-loop response at every gain, account for noise and distortion at the operating frequency, and keep feedback routing short to minimize added sensitivity.

🖥️

Portable Instrumentation and Test Equipment

OPA197ID is appropriate for portable measurement equipment that combines precision signal conditioning with relatively wide supply-headroom requirements. The single-amplifier SOIC-8 package limits board occupancy, while low offset and low drift support repeatable measurements over changing temperature. Rail-to-rail inputs and outputs help designers construct compact acquisition chains around sensors or transducers. For battery-powered equipment, calculate the amplifier's supply consumption and thermal behavior at the maximum signal state, and verify that shutdown sequencing, grounding, and exposed connector transients do not exceed the device's operating limits.

What are the key specifications of OPA197ID that engineers should know?
OPA197ID is a single-channel precision operational amplifier with a 36 V maximum supply, rail-to-rail input and output, ±25 µV typical offset voltage, ±0.25 µV/°C typical offset drift, and a 10 MHz gain-bandwidth product in an 8-pin SOIC package. According to the Texas Instruments OPA197 product page and manufacturer datasheet, these characteristics place it in the precision amplifier category for instrumentation, industrial signal conditioning, and high-voltage-capable analog systems.
Where can I download the OPA197ID datasheet PDF?
The OPA197ID datasheet PDF is available directly from Texas Instruments at https://www.ti.com/lit/ds/symlink/opa197.pdf. The document covers the OPA197 single-amplifier device and its OPAx197 family variants. According to the manufacturer datasheet, it describes the 36 V supply capability, precision offset characteristics, rail-to-rail operation, electrical performance, and application information for engineers evaluating OPA197ID.
Where can I find the OPA197ID pinout and package drawing?
The OPA197ID pinout is found in the pin-configuration section of the Texas Instruments OPA197 manufacturer datasheet. It is an 8-pin SOIC device with output on pin 1, the inverting input on pin 2, the noninverting input on pin 3, the negative supply or ground on pin 4, the positive supply on pin 5, and no-connect positions on pins 6 through 8. The manufacturer product page also links to the package drawings.
Is OPA197ID rail-to-rail on both input and output?
Yes, OPA197ID supports rail-to-rail input and rail-to-rail output operation. According to the Texas Instruments OPA197 product page, the input common-mode voltage range extends to the supply rails, while the output stage can operate close to the supply limits under suitable loading conditions. This feature is useful in single-supply sensor interfaces because it allows inputs near the positive rail without immediately exceeding the amplifier's input range.
What is the OPA197ID operating voltage range?
OPA197ID supports operation up to 36 V, making it suitable for higher-voltage industrial and instrumentation circuits than typical low-voltage precision amplifiers. According to the Texas Instruments OPA197 manufacturer datasheet, the family covers a broad supply range and can be used with single or split supplies. Exact minimum and maximum operating voltages for each package and grade should be confirmed against the electrical-characteristics table before final release.
What is the offset voltage and offset drift of OPA197ID?
OPA197ID has a typical offset voltage of ±25 µV and a typical offset drift of ±0.25 µV/°C. According to the Texas Instruments OPA197 product page, these precision-focused values support stable measurement of small signals and help limit error as temperature changes. For high-accuracy designs, engineers should also account for input bias current, resistor tolerance, bias-current cancellation, and any system-level calibration.
What is the gain-bandwidth product of OPA197ID?
OPA197ID has a 10 MHz gain-bandwidth product. According to the Texas Instruments OPA197 manufacturer datasheet, this bandwidth supports moderate-frequency precision signal paths while retaining low offset characteristics. Closed-loop bandwidth depends on the selected noise gain and stability configuration, so a gain of 10 V/V would nominally correspond to approximately 1 MHz bandwidth before accounting for additional closed-loop and system limitations.
Where can I buy OPA197ID online?
Use the Request a Quote form on this page to request OPA197ID availability, current lead time, and ordering options for the exact 8-pin SOIC package. The product is listed as OPA197ID by Texas Instruments, and the manufacturer product page provides ordering and quality information. A complete procurement decision should also account for lifecycle status, package handling, quantity requirements, and traceable authorized supply.
What is the price of OPA197ID?
The current price of OPA197ID depends on order quantity, availability, and supply conditions. Use the Request a Quote form on this page for the current unit and volume pricing rather than relying on an archived listing. This approach also lets procurement confirm the exact OPA197ID package, orderable quantity, and expected lead time before committing the component to a production bill of materials.
What is the lead time and stock status for OPA197ID?
OPA197ID stock and lead time can change with market conditions and order volume. Request current availability, minimum order quantity, and production lead time through the Request a Quote form on this page. If a supply risk exists, ask the supplier to provide the manufacturer ordering code, lot-traceability details, and any dated lifecycle or market-status information needed for the release.
OPA197ID vs OPA197IDR — which is the better drop-in choice?
OPA197ID and OPA197IDR refer to the same Texas Instruments amplifier family and 8-pin SOIC electrical configuration, with the R suffix identifying a reel-oriented ordering format. For a new design, OPA197ID is the appropriate primary catalog identifier when the assembly process does not require the R packing option. For an existing board designed for tape-and-reel feeding, the matching manufacturer suffix and package must be confirmed before substitution.
When should I choose OPA197ID instead of another precision amplifier?
Choose OPA197ID when the design needs one precision gain stage, a 36 V-capable supply, rail-to-rail input and output, and an 8-pin SOIC footprint. According to the Texas Instruments OPA197 product page, its ±25 µV typical offset and 10 MHz gain-bandwidth product make it suitable for instrumentation and industrial analog chains. Select a different amplifier when dual-channel integration, lower bandwidth, lower power, or a smaller package is the dominant requirement.
Is OPA197ID suitable for precision sensor conditioning?
OPA197ID is suitable for precision sensor conditioning when the sensor signal fits within its rail-to-rail input range and the required closed-loop bandwidth remains below the 10 MHz gain-bandwidth limit. The ±25 µV typical offset and ±0.25 µV/°C typical drift help preserve small-signal accuracy. According to the Texas Instruments OPA197 manufacturer datasheet, the amplifier is intended for instrumentation applications requiring precision DC and AC performance.
What can replace OPA197ID?
A replacement for OPA197ID should have the same 8-pin SOIC pin assignment and must also satisfy the 36 V supply, rail-to-rail input and output, offset, bandwidth, and output-current requirements of the installed circuit. No additional cross-brand drop-in candidate is listed because the available cross-reference results do not establish one with complete parameter and pin-compatibility confirmation. Use the Request a Quote form when sourcing the exact OPA197ID configuration.
What is the best cross-brand equivalent for OPA197ID?
No cross-brand equivalent is recommended without a documented pin-to-pin and parametric comparison against OPA197ID. A valid substitute must preserve the 8-pin SOIC footprint, 36 V supply capability, rail-to-rail input and output, low-offset behavior, and approximately 10 MHz bandwidth while also meeting the required output swing and load current. The Texas Instruments OPA197 manufacturer datasheet should be used as the comparison baseline during qualification.
Can OPA197ID operate from a single supply?
OPA197ID can operate from a single supply, with the positive supply applied to pin 5 and ground or the negative supply applied to pin 4. According to the Texas Instruments OPA197 manufacturer datasheet, the rail-to-rail input and output characteristics are valuable in single-supply systems because they expand the usable signal range near the supply rails. Output swing and common-mode limits still depend on the exact supply voltage and load.

के लिए इंजीनियरिंग संदर्भ डेटा OPA197ID — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose OPA197ID when the design requires one precision amplifier, a supply capability up to 36 V, rail-to-rail input and output, and low offset in an 8-pin SOIC footprint. It is particularly suitable for instrumentation, industrial signal conditioning, precision current measurement, and active-filter stages where the 10 MHz gain-bandwidth product is adequate. Consider a dual or quad precision amplifier when two or more closely related gain stages are needed, or a lower-power device when supply consumption dominates the design. No separate drop-in alternative is listed because the identified packing variant does not add engineering value and the cross-brand results do not establish a fully verified pin-to-pin equivalent. Always compare a proposed substitute against the manufacturer datasheet for common-mode range, output swing, offset, drift, bandwidth, slew rate, output current, and capacitive-load behavior.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Brand Texas Instruments
Package 8-pin SOIC
Channel Count 1 channel
Maximum Supply Voltage 36 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Offset Voltage ±25 µV typical
Offset Voltage Drift ±0.25 µV/°C typical
Gain-Bandwidth Product 10 MHz
Operating Temperature Range -40 °C to +125 °C

मुख्य विशेषताएँ

  • Combines a 36 V supply capability with rail-to-rail signal handling (बनामNo verified drop-in alternative)
  • Provides a balanced combination of precision DC and moderate AC performance (बनामNo verified drop-in alternative)
  • Uses a compact single-amplifier SOIC configuration (बनामOPA197IDR)

डिज़ाइन नोट्स

Place the positive and negative supply-decoupling capacitors close to pins 5 and 4, with the shortest possible return path to the supply reference. Keep the analog ground return physically close to the amplifier rather than sharing a long path with high-current loads. The 36 V rating is a maximum device capability, not a recommendation to operate continuously at the limit; verify the complete circuit against the manufacturer's absolute-maximum and recommended operating tables.

Route the high-impedance input and feedback nets as short and compact as possible, and keep them away from switching nodes and high-current supply paths. Because OPA197ID uses low-offset precision characteristics, thermal gradients across the input pair can create errors that do not appear in a simple room-temperature calculation. Use a stable thermal environment, avoid placing the device near a hot regulator, and use symmetric layout where matching and drift are important.

Do not assume that a rail-to-rail input automatically permits every input combination to reach both rails in every gain or supply condition. Check the manufacturer's common-mode and output-swing graphs, including light-load and capacitive-load cases. Also avoid leaving pins 6 through 8 connected when the selected SOIC pinout designates them as no-connect positions. Confirm the feedback topology and gain against the 10 MHz gain-bandwidth product before using the amplifier in a fast closed-loop path.

For low-level measurements, use stable low-temperature-coefficient feedback resistors and keep their thermal gradients small. The ±25 µV typical offset and ±0.25 µV/°C typical drift describe the amplifier itself, but input bias current, resistor mismatch, leakage, and source impedance can dominate the final error. Calculate those contributions separately and consider bias-current compensation when the source impedance and temperature range make it necessary.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS compliance is identified on the OPA197ID product listing. No manufacturer statement establishing REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is included in the referenced product information.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

OPA197ID datasheet OPA197ID datasheet pdf OPA197ID pinout OPA197ID SOIC-8 footprint OPA197ID equivalent OPA197ID replacement OPA197ID cross reference OPA197ID vs OPA197IDR Texas Instruments OPA197ID OPA197ID 36V rail-to-rail OPA197ID price OPA197ID stock OPA197ID application circuit OPA197ID precision amplifier

संबंधित कंपोनेंट्स और शब्द

Texas Instruments OPA197ID OPA197IDR OPA197 OPA197 family operational amplifier precision operational amplifier single amplifier signal amplifier analog signal chain rail-to-rail input rail-to-rail output input offset voltage offset voltage drift gain-bandwidth product common-mode voltage instrumentation amplifier application industrial sensor conditioning precision current measurement active filter 8-pin SOIC SOIC family surface-mount package SMD RoHS
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें