OPA197ID - 36V Precision RRI/O Op Amp | Texas Instruments
MPN: OPA197ID ✓ 啟用中OPA197ID 概覽
An operational amplifier is a high-gain differential voltage amplifier used to amplify small signals, buffer voltage sources, compare thresholds, and implement active analog filters. The OPA197 belongs to the precision operational amplifier hierarchy, where rail-to-rail input means the common-mode input can approach the supply rails while rail-to-rail output means the output can swing close to either rail under suitable load and output-current conditions. These characteristics simplify circuits that operate from single or split supplies.
The OPA197 combines rail-to-rail input and output with low offset voltage of ±25 µV typical and offset drift of ±0.25 µV/°C typical. Its 10 MHz gain-bandwidth product supports moderate-frequency signal processing, while the 36 V supply capability accommodates industrial and instrument power rails. The single-amplifier configuration reduces board area when only one independent gain stage is required.
The OPA197 is part of the OPAx197 family, which also includes dual and quad precision amplifier variants. The OPA197ID uses the standard 8-pin SOIC footprint, making it suitable for conventional through-hole assembly and PCB layouts that accommodate surface-mount SOIC packages. Pin 5 supplies the positive rail, pin 4 supplies the negative rail or ground, pins 3 and 4? are not interchangeable: pin 3 is the noninverting input and pin 4 is the inverting input, and pin 1 is the output.
Typical uses include precision sensor conditioning, industrial current measurement, high-voltage input dividers, low-level signal amplification, and active filtering. In instrumentation systems, the wide common-mode range can simplify conditioning around sensors operating near a supply rail. In audio and conversion systems, low offset and moderate bandwidth help preserve signal integrity without requiring a more specialized amplifier.
Designers should verify output swing, input common-mode limits, capacitive-load stability, and supply-current requirements under the intended load. Decoupling capacitors should be placed close to the supply pins, and sensitive feedback networks should use stable resistors and a compact layout to minimize offset and noise effects.
This OPA197ID product overview combines manufacturer specifications, package details, sourcing guidance, and application-oriented design considerations. It helps engineers identify whether the single-channel 36 V precision amplifier matches the voltage, accuracy, bandwidth, and footprint requirements of an analog signal chain.
直接替換替代品,適用於 OPA197ID — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: OPA197ID (相同外形與佔位) — 差異在於 Amplifier Type, Package, Gain Bandwidth Product, Gain-Bandwidth Product, Output Type.
此產品無可直接替換的替代品。
申請替代品OPA197ID 最大額定值與電氣特性
| Amplifier Type | Single operational amplifier |
| Maximum Supply Voltage | 36 V |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Offset Voltage | ±25 µV typical |
| Offset Voltage Drift | ±0.25 µV/°C typical |
| Gain-Bandwidth Product | 10 MHz |
| Channel Count | 1 channel |
| 工作溫度範圍 | -40 °C to +125 °C |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
OPA197ID 腳位配置
| 腳位 1 | OUT — Operational-amplifier output |
| 腳位 2 | V- — Inverting input |
| 腳位 3 | V+ — Noninverting input |
| 腳位 4 | V- — Negative supply or ground |
| 腳位 5 | V+ — Positive supply |
| 腳位 6 | NC — Not connected |
| 腳位 7 | NC — Not connected |
| 腳位 8 | NC — Not connected |
典型應用
OPA197ID 適用於 6 應用s: Industrial Sensor Signal Conditioning, Precision Current Measurement, High-Voltage Industrial Signal Conditioning, Active Precision Filtering, Audio and Conversion Analog Front End, Portable Instrumentation and Test Equipment.
Industrial Sensor Signal Conditioning
OPA197ID fits precision sensor front ends that operate from a single supply and require an amplifier to remain useful near the positive rail. Its rail-to-rail input and output, ±25 µV typical offset, and ±0.25 µV/°C typical drift help preserve small sensor signals without moving the operating point far from the rails. The 10 MHz gain-bandwidth product also supports moderate-bandwidth filtering or gain stages around slow sensors. The design should still verify the actual input common-mode range, output swing, noise performance, and stability at the selected gain before production release.
推薦
Precision Current Measurement
OPA197ID is suitable for amplifying the small differential voltage produced by a current-sense element when the system needs accurate DC behavior and flexible input biasing. The ±25 µV typical offset limits the amplifier's intrinsic contribution to the measurement error, while the 10 MHz gain-bandwidth product provides bandwidth for ripple and transient components. Use the amplifier with suitable common-mode and supply arrangements, and confirm that the output remains within its rated swing under the maximum shunt current. Feedback resistance and compensation must be selected for the actual gain and shunt impedance.
推薦
High-Voltage Industrial Signal Conditioning
OPA197ID fits instrumentation circuits operating from higher supply rails because its manufacturer specification establishes a 36 V maximum supply capability. It can buffer or amplify sensor signals where a low-voltage amplifier would not provide sufficient input or output range. Rail-to-rail operation improves signal utilization near the rails, and the precision offset specification supports accurate processing of small industrial signals. Circuit designers must observe absolute maximum voltage limits, provide input protection as required, check output swing at the operating load, and maintain thermal margin in the surrounding analog section.
推薦
Active Precision Filtering
OPA197ID can implement active low-pass or band-pass stages where a 10 MHz gain-bandwidth product and low offset are useful. The 8-pin SOIC format supports conventional analog-board layouts, while the rail-to-rail input and output characteristics help preserve dynamic range in single-supply filter cascades. Set resistor and capacitor values for the intended closed-loop gain, then verify phase margin with the selected gain and load. Precision component tolerances and layout symmetry are especially important for low-frequency filters, where offset drift and component variation can shift the transfer function.
推薦
Audio and Conversion Analog Front End
OPA197ID can serve as a precision gain or buffer stage ahead of audio and data-conversion circuitry when the signal level is small and supply range is relatively high. Its low typical offset reduces DC error, and the 10 MHz bandwidth is sufficient for many audio-band and moderate-frequency conversion paths. Rail-to-rail operation increases flexibility in single-supply signal chains. Designers should avoid treating the bandwidth figure as a guaranteed closed-loop response at every gain, account for noise and distortion at the operating frequency, and keep feedback routing short to minimize added sensitivity.
推薦
Portable Instrumentation and Test Equipment
OPA197ID is appropriate for portable measurement equipment that combines precision signal conditioning with relatively wide supply-headroom requirements. The single-amplifier SOIC-8 package limits board occupancy, while low offset and low drift support repeatable measurements over changing temperature. Rail-to-rail inputs and outputs help designers construct compact acquisition chains around sensors or transducers. For battery-powered equipment, calculate the amplifier's supply consumption and thermal behavior at the maximum signal state, and verify that shutdown sequencing, grounding, and exposed connector transients do not exceed the device's operating limits.
推薦
推薦產品摘要
工程參考資料,適用於 OPA197ID — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Texas Instruments |
| Package | 8-pin SOIC |
| Channel Count | 1 channel |
| Maximum Supply Voltage | 36 V |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Offset Voltage | ±25 µV typical |
| Offset Voltage Drift | ±0.25 µV/°C typical |
| Gain-Bandwidth Product | 10 MHz |
| Operating Temperature Range | -40 °C to +125 °C |
主要差異化特點
- Combines a 36 V supply capability with rail-to-rail signal handling (對比No verified drop-in alternative)
- Provides a balanced combination of precision DC and moderate AC performance (對比No verified drop-in alternative)
- Uses a compact single-amplifier SOIC configuration (對比OPA197IDR)
設計說明
Place the positive and negative supply-decoupling capacitors close to pins 5 and 4, with the shortest possible return path to the supply reference. Keep the analog ground return physically close to the amplifier rather than sharing a long path with high-current loads. The 36 V rating is a maximum device capability, not a recommendation to operate continuously at the limit; verify the complete circuit against the manufacturer's absolute-maximum and recommended operating tables.
Route the high-impedance input and feedback nets as short and compact as possible, and keep them away from switching nodes and high-current supply paths. Because OPA197ID uses low-offset precision characteristics, thermal gradients across the input pair can create errors that do not appear in a simple room-temperature calculation. Use a stable thermal environment, avoid placing the device near a hot regulator, and use symmetric layout where matching and drift are important.
Do not assume that a rail-to-rail input automatically permits every input combination to reach both rails in every gain or supply condition. Check the manufacturer's common-mode and output-swing graphs, including light-load and capacitive-load cases. Also avoid leaving pins 6 through 8 connected when the selected SOIC pinout designates them as no-connect positions. Confirm the feedback topology and gain against the 10 MHz gain-bandwidth product before using the amplifier in a fast closed-loop path.
For low-level measurements, use stable low-temperature-coefficient feedback resistors and keep their thermal gradients small. The ±25 µV typical offset and ±0.25 µV/°C typical drift describe the amplifier itself, but input bias current, resistor mismatch, leakage, and source impedance can dominate the final error. Calculate those contributions separately and consider bias-current compensation when the source impedance and temperature range make it necessary.
合規資訊
RoHS compliance is identified on the OPA197ID product listing. No manufacturer statement establishing REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is included in the referenced product information.