Texas Instruments

OPA2277U - 10uV Precision Dual Op Amp | Texas Instruments

MPN: OPA2277U ✓ सक्रिय
10 uV Vdss 1 nA Id 8-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

OPA2277U अवलोकन

Texas Instruments OPA2277U is a dual, high-precision operational amplifier with 10 uV typical input offset voltage, 0.1 uV/°C offset drift, and a 1 MHz gain-bandwidth product, housed in an 8-pin SOIC package. It is designed for instrumentation, measurement, and signal-conditioning systems where low offset, low bias current, and high open-loop gain are important.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high input impedance and low output impedance. The OPA2277U belongs to the operational-amplifier hierarchy within amplifier ICs and combines precision, low power consumption, and wide supply-voltage flexibility. Each device contains two independent amplifier channels, allowing one package to implement matched signal-conditioning functions.

Key precision characteristics include a maximum input offset voltage of 25 uV, a typical offset voltage of 10 uV, and maximum input bias current of 1 nA. Its 0.1 uV/°C offset drift, 134 dB typical open-loop gain, 1 MHz gain-bandwidth product, and 0.8 V/us slew rate make it suitable for accurate amplification of low-level signals. The device operates from ±2 V to ±18 V according to the Texas Instruments product page.

The OPAx277 family replaces the industry-standard OP-177 while improving noise performance, widening output-voltage swing, increasing speed, and reducing quiescent current relative to the legacy device. Its combination of low offset voltage, low offset drift, low bias current, high common-mode rejection, and high power-supply rejection makes it suitable for precision current measurement, bridge-signal conditioning, low-level transducers, and buffered analog acquisition systems.

Typical applications include instrumentation-amplifier input stages, precision current sensing, strain-gauge and thermocouple signal chains, laboratory measurement equipment, and industrial sensor interfaces. The dual configuration can also implement independent low-level channels or, where appropriate, differential amplifier topologies while reducing board area relative to two single amplifier packages.

For PCB design, keep input and feedback components close to the associated pins and provide stable bypass capacitance on the power-supply lines. Offset and drift dominate the total error budget in precision DC measurements, so resistor-network matching, input-bias-current compensation, thermal gradients, and clean grounding can matter as much as the amplifier’s headline specifications.

के लिए ड्रॉप-इन विकल्प OPA2277U — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं OPA2277U (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Amplifier Type, Number of Channels, Package, Slew Rate.

Texas Instruments
Amplifier Type: Precision Operational Amplifier
Number of Channels: 2 (Dual)
Package: 8-pin SOIC (D)
इसके साथ तुलना करें OPA2277U →

OPA2277UA

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Texas Instruments
📦 8-pin SOIC
2 (Dual) · Precision Operational Amplifier · 10 µV · ±0.1 µV/°C · 134 dB · 140 dB · 130 dB · 800 µA

कीमत के लिए संपर्क करें

डेटाशीट देखें →

OPA2277AIDR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 8-pin SOIC
Same 10 uV-class precision architecture and 8-pin SOIC footprint; the AIDR ordering code changes the qualification or temperature grade rather than the core electrical function.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA2277U Maximum Ratings और Electrical Characteristics

Amplifier Type Dual precision operational amplifier
Number of Channels 2 channels
Typical Input Offset Voltage 10 uV
Maximum Input Offset Voltage 25 uV
Offset Voltage Drift 0.1 uV/°C
Maximum Input Bias Current 1 nA
Gain-Bandwidth Product 1 MHz
Slew Rate 0.8 V/us
Typical Open-Loop Gain 134 dB
Supply Voltage Range ±2 V to ±18 V
पैकेज 8-pin SOIC
माउंटिंग प्रकार Surface mount
General-Purpose Classification Standard amplifier
Noise Performance Improved relative to the industry-standard OP-177
Output Voltage Swing Wider than the industry-standard OP-177
Common-Mode Rejection High common-mode rejection
Power-Supply Rejection High power-supply rejection
Power Consumption Low power

OPA2277U पिन कॉन्फ़िगरेशन

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
पिन 1 OUTA — Amplifier A output
पिन 2 IN- A — Inverting input of amplifier A
पिन 3 IN+ A — Non-inverting input of amplifier A
पिन 4 V- — Negative power-supply connection
पिन 5 IN+ B — Non-inverting input of amplifier B
पिन 6 IN- B — Inverting input of amplifier B
पिन 7 OUTB — Amplifier B output
पिन 8 V+ — Positive power-supply connection

सामान्य अनुप्रयोग

OPA2277U के लिए उपयुक्त है 6 अनुप्रयोगs: Precision Current Sensing, Strain-Gauge Bridge Conditioning, Thermocouple Measurement, Laboratory Instrumentation, Industrial Sensor Interfaces, Precision Voltage Buffering.

⚡

Precision Current Sensing

The OPA2277U suits low-side shunt amplifiers where small differential signals must be amplified without excessive input-referred error. Its 10 uV typical offset voltage becomes a shunt-voltage error of 10 uV multiplied by the selected noise gain, while the 0.1 uV/°C drift helps maintain accuracy as the board temperature changes. The 1 nA maximum bias current is also favorable when the shunt impedance is high. Two channels can monitor separate loads. Use a Kelvin connection, place the gain network close to the amplifier, and verify common-mode and output-headroom limits against the manufacturer electrical characteristics.

🏭

Strain-Gauge Bridge Conditioning

The OPA2277U is appropriate for instrumentation stages that measure small bridge differentials near the electrical zero of the sensing element. Its 10 uV typical input offset and 0.1 uV/°C drift directly influence the zero-point error, while the 134 dB typical open-loop gain helps preserve accuracy at practical noise gains. The dual package can amplify or buffer related signals without using two single-amplifier packages. For best results, place the amplifier and gain resistors close to the bridge inputs, maintain symmetric routing, and provide clean supply bypassing to preserve common-mode and power-supply rejection.

🌡️

Thermocouple Measurement

The OPA2277U can amplify the low-level differential voltage produced by a thermocouple when the design emphasizes low offset and drift. A 10 uV typical offset translates into temperature error directly through the thermocouple sensitivity, making the 0.1 uV/°C drift particularly relevant in stable-temperature measurements. Its 1 MHz gain-bandwidth product is ample for common thermocouple bandwidths, although noise filtering and the complete error budget remain important. Use cold-junction compensation near the connector, isolate input wiring from heat sources, and confirm the amplifier’s input common-mode range at the lowest operating voltage.

🖥️

Laboratory Instrumentation

The OPA2277U is suitable for laboratory front ends that amplify low-level sensor outputs before an ADC or measurement converter. Its 10 uV typical offset and 1 nA maximum bias current help preserve the integrity of high-impedance sources, while the 0.8 V/us slew rate and 1 MHz gain-bandwidth product support moderate-bandwidth instrumentation. The dual configuration can reduce board space when the instrument processes two channels. Engineers should evaluate noise density, settling time, output swing, and common-mode range for the selected gain, then place feedback and compensation components close to the relevant pins.

🏭

Industrial Sensor Interfaces

The OPA2277U is useful for precision industrial sensor interfaces that produce small differential voltages and require stable DC behavior. Its low offset voltage reduces the measurement floor, and the 0.1 uV/°C drift limits sensitivity to gradual temperature changes. The dual channel arrangement allows two related inputs to share a package, although independent input filtering is still required to prevent common sources of interference from affecting both channels. Use a clean analog ground strategy, short input traces, regulated supply rails, and careful separation from switching nodes and high-current return paths.

🔧

Precision Voltage Buffering

The OPA2277U can buffer high-impedance sources when low offset and low bias current are more important than wideband performance. Its 10 uV typical offset minimizes the voltage error introduced by the amplifier, and the 1 nA maximum bias current reduces errors when driving a resistive network at the limit of the amplifier’s output capability. The 1 MHz gain-bandwidth product limits closed-loop bandwidth at higher gains, so stability and settling must be checked with the actual source impedance and load. Keep feedback routing short and place any output isolation resistance according to the manufacturer guidance for capacitive loading.

Where to download the OPA2277U datasheet PDF?
The OPA2277U datasheet PDF is available from Texas Instruments at the official OPAx277 datasheet link, with an additional OPA2277 product page containing ordering and quality information. The manufacturer describes the OPA2277 as a 10 uV, 0.1 uV/°C high-precision, low-power operational amplifier. Use the pin-description table and electrical-characteristics tables in that PDF for final design verification.
What are the key specifications of OPA2277U that engineers should know?
The OPA2277U is a dual precision operational amplifier with 10 uV typical input offset voltage, 25 uV maximum offset, 0.1 uV/°C offset drift, and 1 nA maximum input bias current. According to the Texas Instruments OPA2277 product page, it is a low-power precision amplifier operating from ±2 V to ±18 V. Its 1 MHz gain-bandwidth product and 0.8 V/us slew rate support accurate low-frequency measurement and signal-conditioning circuits.
What is the OPA2277U pinout?
The OPA2277U uses an 8-pin SOIC with two independent amplifier channels. Pins 1, 2, and 3 are OUTA, IN− A, and IN+ A; pins 8, 7, and 6 are V+, OUTB, and IN− B; pin 5 is IN+ B; and pin 4 is V−. Use the manufacturer’s OPAx277 datasheet pin diagram when assigning PCB tracks and checking the exposed package geometry.
What is the OPA2277U input offset voltage?
The OPA2277U has a typical input offset voltage of 10 uV and a maximum of 25 uV, according to the OPA2277U technical summary. Its specified offset drift is 0.1 uV/°C. These values are particularly important in bridge, thermocouple, and current-sense measurements because input-referred offset directly appears as an error at the amplifier output.
What supply voltage does OPA2277U require?
The OPA2277U operates from ±2 V to ±18 V, as stated on the Texas Instruments OPA2277 product page. This range supports conventional dual-supply analog systems as well as lower-voltage designs within the device’s supported operating range. Confirm the selected package’s electrical limits, output swing, and supply limits in the manufacturer datasheet before finalizing the power architecture.
How much bandwidth and slew rate does OPA2277U provide?
The OPA2277U provides a 1 MHz gain-bandwidth product and a 0.8 V/us slew rate. These values determine its useful bandwidth at a selected closed-loop gain and how quickly it can follow large-signal changes. The device is therefore primarily suited to precision low-frequency signal conditioning rather than wideband, high-frequency waveform work.
Is OPA2277U suitable for low-level sensor amplification?
Yes, the OPA2277U is suitable for low-level sensor amplification because it combines 10 uV typical offset, 0.1 uV/°C drift, and 1 nA maximum bias current with a 1 MHz gain-bandwidth product. These characteristics reduce input-referred error when conditioning strain-gauge, temperature, and current-sensor outputs. Input filtering, bias-current compensation, and thermal layout still determine practical accuracy.
OPA2277U versus OPA177GS: which precision amplifier is preferable?
The OPA2277U generally provides a more modern precision-amplifier implementation: the OPAx277 family is described as improving noise, widening output-voltage swing, doubling speed, and reducing quiescent current relative to the industry-standard OP-177. The OPA177GS also targets precision applications, but the exact package and ordering options should be compared before selecting a drop-in replacement for an existing board.
What is the best drop-in replacement for OPA2277U?
The closest same-family drop-in choices are the OPA2277UA and OPA2277AIDR, both using the SOIC-8 footprint identified for the OPA2277U. OPA2277UA preserves the core precision specifications, while OPA2277AIDR adds a different qualification or temperature grade. Verify supply range, temperature grade, lifecycle status, and pin assignments against the manufacturer datasheet before substitution.
Can OPA2277AIDR replace OPA2277U in an existing PCB?
Yes, OPA2277AIDR can be considered for an OPA2277U PCB because it is a member of the same dual-precision amplifier family in an 8-pin SOIC package and retains the core 10 uV-class offset architecture. Qualification, temperature range, and exact ordering conditions must still match the original design requirements. The replacement should not be selected solely from package appearance.
When should I choose OPA2277U over a generic precision op amp?
Choose OPA2277U when the circuit benefits from the combination of 10 uV typical offset, 0.1 uV/°C drift, 1 nA maximum input bias current, and a 1 MHz gain-bandwidth product. Its dual channels can also reduce package count for two precision channels. A generic amplifier may be appropriate when lower offset performance is unnecessary, but the exact input-referred error budget should determine the choice.
Is OPA2277U the same as OPA2277UA?
OPA2277U and OPA2277UA belong to the same OPA2277 precision-amplifier family and use the same 8-pin SOIC electrical arrangement, but their orderable packaging codes can differ. OPA2277UA is listed as a package or orderable variant rather than a functionally different precision amplifier. Confirm reel quantity, manufacturer marking, and ordering information before substituting one for the other.
What can replace OPA2277U?
OPA2277UA and OPA2277AIDR are the supported same-family drop-in candidates identified for the OPA2277U because they retain the 8-pin SOIC footprint and precision-amplifier architecture. They differ in ordering or qualification attributes rather than basic voltage-amplifier function. Confirm temperature grade, supply limits, availability, and lifecycle status in the manufacturer’s part details before making the change.
Where can I request a quote for OPA2277U?
Use the Request a Quote form on this page to request current OPA2277U pricing, stock, minimum order quantity, and lead time. The form provides a single direct channel for commercial inquiries without relying on static price text. For production planning, also request the manufacturer orderable part number, package quantity, and date code requirements.
What is the current price and lead time for OPA2277U?
Current OPA2277U pricing and lead time depend on package quantity, date code, and market conditions, so use the Request a Quote form on this page to obtain a current response. Include the required quantity, reel or tube format, acceptable date code, target shipping location, and production schedule. These details allow procurement to quote the exact OPA2277U orderable configuration.
Is OPA2277U currently in stock?
Stock availability for OPA2277U can change with quantity and package format, so use the Request a Quote form on this page for the current status. The form can confirm available inventory, scheduled delivery, and any lot or date-code restrictions. For production qualification, request lifecycle confirmation and a manufacturer traceability statement with the quotation.
How should OPA2277U be used in a precision current-sense circuit?
Use the OPA2277U in a differential current-sense amplifier when the required bandwidth is below the 1 MHz gain-bandwidth product and the 0.8 V/us slew rate supports the expected transients. Its 10 uV typical offset is multiplied by the shunt resistance and noise gain, so that gain must be included in the error budget. Output-headroom, common-mode range, and Kelvin-connected shunt layout also need verification.

के लिए इंजीनियरिंग संदर्भ डेटा OPA2277U — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose OPA2277U for precision DC signal conditioning when low offset, low drift, low bias current, and two amplifier channels in one package are important. Its 10 uV typical offset, 0.1 uV/°C drift, and 1 nA maximum bias current make it appropriate for current-shunt, bridge, and temperature-sensor interfaces. OPA2277UA is the closest same-family ordering alternative when its package quantity and marking are acceptable. OPA2277AIDR is useful when the required qualification or temperature grade is specified by the system designer. Neither alternative provides a meaningful core performance gain over OPA2277U; selection should focus on exact orderable conditions. The 1 MHz gain-bandwidth product and 0.8 V/us slew rate make this device better suited to low-frequency precision measurement than to wideband signal work. For any substitution, verify supply range, common-mode range, output swing, temperature grade, lifecycle status, and both SOIC pin assignments in the manufacturer documentation.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद OPA2277UA OPA2277AIDR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Channel Count 2 channels 2 channels 2 channels
Typical Input Offset Voltage 10 uV 10 uV 10 uV
Maximum Input Offset Voltage 25 uV 25 uV 25 uV
Offset Voltage Drift 0.1 uV/°C 0.1 uV/°C 0.1 uV/°C
Maximum Input Bias Current 1 nA 1 nA 1 nA
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz
Slew Rate 0.8 V/us 0.8 V/us 0.8 V/us
Typical Open-Loop Gain 134 dB 134 dB 134 dB
Special Qualification Standard general-purpose precision amplifier Standard orderable variant AIDR qualification or temperature-grade ordering variant

मुख्य विशेषताएँ

  • Very low input offset for a general-purpose dual precision amplifier (बनामOPA2277UA)
  • Low offset drift supports temperature-stable measurement (बनामOPA2277AIDR)
  • Two precision channels in one package (बनामOPA2227UA)

डिज़ाइन नोट्स

Route each amplifier’s two input pins, feedback components, and output together with short, symmetric traces. This is especially important for precision DC measurements because mismatched input traces can convert thermal gradients or leakage currents into differential errors. Keep the SOIC-8 footprint area free of high-current paths and place supply-bypass capacitors close to pins 4 and 8.

Calculate offset error using the actual noise gain: input-referred offset multiplied by noise gain appears at the output. With a 10 uV typical input offset, a gain of 100 produces a typical 1 mV output offset. Also multiply the 0.1 uV/°C drift by the noise gain and relevant temperature change. Do not use typical offset as a guaranteed production-limit specification when designing a tight error budget.

The 1 MHz gain-bandwidth product means usable closed-loop bandwidth decreases as closed-loop gain increases. Check settling and phase margin using the intended noise gain, source impedance, load, and parasitic capacitance. Avoid adding large capacitors directly to the output; use an isolation resistor if capacitive loading cannot be avoided and verify stability against the manufacturer guidance.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer identifies the OPAx277 series as replacing the industry-standard OP-177 and lists improved noise, wider output swing, higher speed, and lower quiescent current. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated and remain unknown.

डेटा सत्यापन तिथि: 2026-11-19 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

opa2277u datasheet OPA2277U TI precision op amp OPA2277U input offset voltage OPA2277U 8-SOIC pinout OPA2277U current sense amplifier OPA2277U strain gauge amplifier OPA2277U gain bandwidth product OPA2277U drop-in replacement OPA2277U vs OPA177GS OPA2277U equivalent amplifier OPA2277U price OPA2277U stock

संबंधित कंपोनेंट्स और शब्द

Texas Instruments OPA2277U OPA2277UA OPA2277AIDR OPA2227UA OPA177GS OPA2277 family OP-177 precision operational amplifier dual operational amplifier amplifier IC signal-conditioning amplifier instrumentation amplifier input offset voltage offset voltage drift input bias current gain-bandwidth product slew rate open-loop gain common-mode rejection power-supply rejection 8-pin SOIC SOIC package family surface-mount package current-sense amplifier
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें