OPA2277U - 10uV Precision Dual Op Amp | Texas Instruments
MPN: OPA2277U ✓ 啟用中OPA2277U 概覽
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high input impedance and low output impedance. The OPA2277U belongs to the operational-amplifier hierarchy within amplifier ICs and combines precision, low power consumption, and wide supply-voltage flexibility. Each device contains two independent amplifier channels, allowing one package to implement matched signal-conditioning functions.
Key precision characteristics include a maximum input offset voltage of 25 uV, a typical offset voltage of 10 uV, and maximum input bias current of 1 nA. Its 0.1 uV/°C offset drift, 134 dB typical open-loop gain, 1 MHz gain-bandwidth product, and 0.8 V/us slew rate make it suitable for accurate amplification of low-level signals. The device operates from ±2 V to ±18 V according to the Texas Instruments product page.
The OPAx277 family replaces the industry-standard OP-177 while improving noise performance, widening output-voltage swing, increasing speed, and reducing quiescent current relative to the legacy device. Its combination of low offset voltage, low offset drift, low bias current, high common-mode rejection, and high power-supply rejection makes it suitable for precision current measurement, bridge-signal conditioning, low-level transducers, and buffered analog acquisition systems.
Typical applications include instrumentation-amplifier input stages, precision current sensing, strain-gauge and thermocouple signal chains, laboratory measurement equipment, and industrial sensor interfaces. The dual configuration can also implement independent low-level channels or, where appropriate, differential amplifier topologies while reducing board area relative to two single amplifier packages.
For PCB design, keep input and feedback components close to the associated pins and provide stable bypass capacitance on the power-supply lines. Offset and drift dominate the total error budget in precision DC measurements, so resistor-network matching, input-bias-current compensation, thermal gradients, and clean grounding can matter as much as the amplifier’s headline specifications.
直接替換替代品,適用於 OPA2277U — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: OPA2277U (相同外形與佔位) — 差異在於 Amplifier Type, Number of Channels, Package, Slew Rate.
OPA2277UA
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →OPA2277AIDR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
OPA2277U 最大額定值與電氣特性
| Amplifier Type | Dual precision operational amplifier |
| Number of Channels | 2 channels |
| Typical Input Offset Voltage | 10 uV |
| Maximum Input Offset Voltage | 25 uV |
| Offset Voltage Drift | 0.1 uV/°C |
| Maximum Input Bias Current | 1 nA |
| Gain-Bandwidth Product | 1 MHz |
| Slew Rate | 0.8 V/us |
| Typical Open-Loop Gain | 134 dB |
| Supply Voltage Range | ±2 V to ±18 V |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
| General-Purpose Classification | Standard amplifier |
| Noise Performance | Improved relative to the industry-standard OP-177 |
| Output Voltage Swing | Wider than the industry-standard OP-177 |
| Common-Mode Rejection | High common-mode rejection |
| Power-Supply Rejection | High power-supply rejection |
| Power Consumption | Low power |
OPA2277U 腳位配置
| 腳位 1 | OUTA — Amplifier A output |
| 腳位 2 | IN- A — Inverting input of amplifier A |
| 腳位 3 | IN+ A — Non-inverting input of amplifier A |
| 腳位 4 | V- — Negative power-supply connection |
| 腳位 5 | IN+ B — Non-inverting input of amplifier B |
| 腳位 6 | IN- B — Inverting input of amplifier B |
| 腳位 7 | OUTB — Amplifier B output |
| 腳位 8 | V+ — Positive power-supply connection |
典型應用
OPA2277U 適用於 6 應用s: Precision Current Sensing, Strain-Gauge Bridge Conditioning, Thermocouple Measurement, Laboratory Instrumentation, Industrial Sensor Interfaces, Precision Voltage Buffering.
Precision Current Sensing
The OPA2277U suits low-side shunt amplifiers where small differential signals must be amplified without excessive input-referred error. Its 10 uV typical offset voltage becomes a shunt-voltage error of 10 uV multiplied by the selected noise gain, while the 0.1 uV/°C drift helps maintain accuracy as the board temperature changes. The 1 nA maximum bias current is also favorable when the shunt impedance is high. Two channels can monitor separate loads. Use a Kelvin connection, place the gain network close to the amplifier, and verify common-mode and output-headroom limits against the manufacturer electrical characteristics.
推薦
Strain-Gauge Bridge Conditioning
The OPA2277U is appropriate for instrumentation stages that measure small bridge differentials near the electrical zero of the sensing element. Its 10 uV typical input offset and 0.1 uV/°C drift directly influence the zero-point error, while the 134 dB typical open-loop gain helps preserve accuracy at practical noise gains. The dual package can amplify or buffer related signals without using two single-amplifier packages. For best results, place the amplifier and gain resistors close to the bridge inputs, maintain symmetric routing, and provide clean supply bypassing to preserve common-mode and power-supply rejection.
推薦
Thermocouple Measurement
The OPA2277U can amplify the low-level differential voltage produced by a thermocouple when the design emphasizes low offset and drift. A 10 uV typical offset translates into temperature error directly through the thermocouple sensitivity, making the 0.1 uV/°C drift particularly relevant in stable-temperature measurements. Its 1 MHz gain-bandwidth product is ample for common thermocouple bandwidths, although noise filtering and the complete error budget remain important. Use cold-junction compensation near the connector, isolate input wiring from heat sources, and confirm the amplifier’s input common-mode range at the lowest operating voltage.
推薦
Laboratory Instrumentation
The OPA2277U is suitable for laboratory front ends that amplify low-level sensor outputs before an ADC or measurement converter. Its 10 uV typical offset and 1 nA maximum bias current help preserve the integrity of high-impedance sources, while the 0.8 V/us slew rate and 1 MHz gain-bandwidth product support moderate-bandwidth instrumentation. The dual configuration can reduce board space when the instrument processes two channels. Engineers should evaluate noise density, settling time, output swing, and common-mode range for the selected gain, then place feedback and compensation components close to the relevant pins.
推薦
Industrial Sensor Interfaces
The OPA2277U is useful for precision industrial sensor interfaces that produce small differential voltages and require stable DC behavior. Its low offset voltage reduces the measurement floor, and the 0.1 uV/°C drift limits sensitivity to gradual temperature changes. The dual channel arrangement allows two related inputs to share a package, although independent input filtering is still required to prevent common sources of interference from affecting both channels. Use a clean analog ground strategy, short input traces, regulated supply rails, and careful separation from switching nodes and high-current return paths.
推薦
Precision Voltage Buffering
The OPA2277U can buffer high-impedance sources when low offset and low bias current are more important than wideband performance. Its 10 uV typical offset minimizes the voltage error introduced by the amplifier, and the 1 nA maximum bias current reduces errors when driving a resistive network at the limit of the amplifier’s output capability. The 1 MHz gain-bandwidth product limits closed-loop bandwidth at higher gains, so stability and settling must be checked with the actual source impedance and load. Keep feedback routing short and place any output isolation resistance according to the manufacturer guidance for capacitive loading.
推薦
工程參考資料,適用於 OPA2277U — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | OPA2277UA | OPA2277AIDR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Typical Input Offset Voltage | 10 uV | 10 uV | 10 uV |
| Maximum Input Offset Voltage | 25 uV | 25 uV | 25 uV |
| Offset Voltage Drift | 0.1 uV/°C | 0.1 uV/°C | 0.1 uV/°C |
| Maximum Input Bias Current | 1 nA | 1 nA | 1 nA |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz |
| Slew Rate | 0.8 V/us | 0.8 V/us | 0.8 V/us |
| Typical Open-Loop Gain | 134 dB | 134 dB | 134 dB |
| Special Qualification | Standard general-purpose precision amplifier | Standard orderable variant | AIDR qualification or temperature-grade ordering variant |
主要差異化特點
- Very low input offset for a general-purpose dual precision amplifier (對比OPA2277UA)
- Low offset drift supports temperature-stable measurement (對比OPA2277AIDR)
- Two precision channels in one package (對比OPA2227UA)
設計說明
Route each amplifier’s two input pins, feedback components, and output together with short, symmetric traces. This is especially important for precision DC measurements because mismatched input traces can convert thermal gradients or leakage currents into differential errors. Keep the SOIC-8 footprint area free of high-current paths and place supply-bypass capacitors close to pins 4 and 8.
Calculate offset error using the actual noise gain: input-referred offset multiplied by noise gain appears at the output. With a 10 uV typical input offset, a gain of 100 produces a typical 1 mV output offset. Also multiply the 0.1 uV/°C drift by the noise gain and relevant temperature change. Do not use typical offset as a guaranteed production-limit specification when designing a tight error budget.
The 1 MHz gain-bandwidth product means usable closed-loop bandwidth decreases as closed-loop gain increases. Check settling and phase margin using the intended noise gain, source impedance, load, and parasitic capacitance. Avoid adding large capacitors directly to the output; use an isolation resistor if capacitive loading cannot be avoided and verify stability against the manufacturer guidance.
合規資訊
The manufacturer identifies the OPAx277 series as replacing the industry-standard OP-177 and lists improved noise, wider output swing, higher speed, and lower quiescent current. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated and remain unknown.