Texas Instruments

OPA2634U - Dual 250V/us Wideband Amplifier | Texas Instruments

MPN: OPA2634U ✓ सक्रिय
2.7 V to 10 V Vdss 80 mA Id 8-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

OPA2634U अवलोकन

The Texas Instruments OPA2634U is a dual, voltage-feedback, wideband operational amplifier optimized for +3 V or +5 V single-supply operation, with a 250 V/us slew rate, 5.6 nV/Hz input-voltage noise, and operation from 2.7 V to 10 V in an 8-pin SOIC package. Its input range includes ground and its output can swing to 4.8 V on a +5 V supply.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The OPA2634U belongs to the voltage-feedback operational-amplifier family, combining a wide frequency-response range with high output-current capability. This makes it useful when a signal must be amplified accurately across a broad bandwidth or driven into a relatively low-impedance load.

Principal features include a 250 V/us slew rate, input-voltage noise density of 5.6 nV/Hz, high output current of 80 mA, and a 73 mA rated output-current or output-current-per-channel value. The amplifier operates from 2.7 V to 10 V, supports operation down to +3 V or +5 V, and can produce a 4.8 V output swing from a +5 V supply. The package is an 8-pin SOIC suitable for conventional surface-mount assembly.

The high slew rate allows large-amplitude signals to change quickly, while the low-noise input stage supports amplification of small signals and instrumentation signals. Input operation extending to ground is particularly useful in single-supply systems because the amplifier can process signals referenced close to the lower supply rail without a negative supply. The 80 mA output-current capability also provides more drive than a typical low-power signal-conditioning amplifier.

Typical uses include video-signal amplification, communications-interface buffering, data-conversion support, test and measurement equipment, and industrial control or instrumentation systems. The wide supply range also makes the device suitable for both 3.3 V and 5 V electronic systems where the signal amplitude and load require more bandwidth than a general-purpose precision amplifier can provide.

The principal design trade-off is power versus output-drive capability. A high slew rate and 80 mA output-current rating can increase dissipated power compared with low-power micropower amplifiers. Decoupling capacitors should be placed close to the supply pins, and output loading should be checked against the amplifier's drive and stability characteristics before large-signal deployment.

This page combines the OPA2634U electrical characteristics, package details, application guidance, comparison information, and sourcing-oriented technical context into one engineering reference. It also identifies where an exact drop-in substitute must be reviewed for supply range, bandwidth, slew rate, noise, package, and pin compatibility rather than relying on amplifier function alone.

के लिए ड्रॉप-इन विकल्प OPA2634U — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

OPA2634UA

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 8-pin SOIC
Same OPA2634 family electrical ratings and 8-pin SOIC footprint; 0% change to the 250 V/us slew rate, 5.6 nV/Hz noise density, and 80 mA high output-current figures, with ordering-code or qualification details requiring verification.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA2634UID

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 8-pin SOIC
Same OPA2634-family 8-pin SOIC architecture and 0% change to the stated core slew-rate, noise, and output-current figures; exact temperature grade and qualification must be confirmed for the ordered suffix.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA2634UDB

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 8-pin SOIC
Same 8-pin SOIC OPA2634-family construction with 0% change to the stated 250 V/us slew rate, 5.6 nV/Hz input noise, and 80 mA high output-current characteristics; qualification and marking details require confirmation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA2634U Maximum Ratings और Electrical Characteristics

Amplifier Type Dual voltage-feedback operational amplifier
Number of Channels 2 channels
Supply Voltage Range 2.7 V to 10 V
Nominal Single-Supply Operation +3 V or +5 V
Slew Rate 250 V/us
Input Voltage Noise Density 5.6 nV/Hz
High Output Current 80 mA
Rated Output Current per Channel 73 mA
Output Swing on +5 V Supply 4.8 V
Input Common-Mode Range Includes ground
पैकेज 8-pin SOIC
Packaging Tube
माउंटिंग प्रकार Surface mount

OPA2634U 8-pin soic पिन कॉन्फ़िगरेशन गाइड

OPA2634U (8-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

OPA2634U के लिए 8-pin soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: OPA2634U.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

OPA2634U के लिए उपयुक्त है 6 अनुप्रयोगs: Video Signal Amplification, Communications Interface Buffering, Precision Instrumentation Signal Chain, Data Acquisition Front End, Active Filtering and Signal Conditioning, Test and Measurement Equipment.

📺

Video Signal Amplification

The OPA2634U fits video and other high-slew-rate signal paths because its 250 V/us slew rate preserves large-amplitude transitions and its 5.6 nV/Hz input noise supports low-level signal amplification. The amplifier can operate from a single +5 V supply while producing an output swing up to 4.8 V, making it useful for line-driver, buffer, and gain-stage roles with moderate loading. Its input range includes ground, which simplifies signal conditioning around video signals referenced near the lower rail. The design should still verify closed-loop gain, load capacitance, and stability against the manufacturer's typical curves before the amplifier is used close to its performance limits.

🌐

Communications Interface Buffering

The OPA2634U is suitable for communications-interface buffering where fast signal transitions and output drive are more important than minimum power consumption. Its 250 V/us slew rate reduces the risk of slew-limited distortion, while the 80 mA high output-current capability offers useful drive for cable, termination, or active-filter networks. Operation from 2.7 V to 10 V supports both +3 V and +5 V interface electronics, and the input range includes ground for single-supply coupling. When using the amplifier with reactive or capacitively loaded outputs, verify gain, phase margin, and load limitations using the manufacturer guidance rather than assuming that all loads are stable.

🏭

Precision Instrumentation Signal Chain

The OPA2634U can amplify small instrumentation signals where the 5.6 nV/Hz input-voltage noise density is valuable, while its 250 V/us slew rate preserves the time-domain response of dynamic sensor signals. The 73 mA rated output current per channel and 80 mA high output-current figure provide more drive than a typical micropower instrumentation amplifier. Its 2.7 V to 10 V operating range allows use in compact battery-powered and industrial systems, although the power draw should be compared against the system's thermal budget. For slow precision measurements, offset, bias-current, and drift requirements must also be checked; those values are not established by the listed headline characteristics.

🖥️

Data Acquisition Front End

OPA2634U is appropriate for intermediate gain and drive stages in data-acquisition systems that require faster settling and greater output drive than a general-purpose precision amplifier. The 250 V/us slew rate helps preserve rapid input transitions, while the 5.6 nV/Hz input noise supports amplification of small converter outputs. A single +3 V or +5 V supply reduces system complexity, and the input range includes ground enables direct treatment of unipolar signals near zero volts. Designers should account for settling time, input bias current, offset voltage, and ADC drive requirements, and should verify that the selected gain and feedback network provide adequate stability.

🔧

Active Filtering and Signal Conditioning

The OPA2634U can serve as an active filter or general signal-conditioning element when the circuit benefits from high bandwidth and the ability to drive a wider range of loads. Its 250 V/us slew rate supports higher-frequency filter signals, and the 80 mA high output-current capability is advantageous with low-impedance filter stages. The amplifier's 2.7 V to 10 V supply range allows design reuse across +3 V and +5 V systems, while input operation down to ground simplifies single-supply filter biasing. Component tolerances, op-amp noise, and the filter's closed-loop stability determine the achievable response, so those parameters should be reviewed before production release.

🧩

Test and Measurement Equipment

OPA2634U is well suited to wideband test and measurement circuits because its 250 V/us slew rate combines with low 5.6 nV/Hz input noise and 80 mA high output-current capability. The dual configuration provides two independent amplifiers in one 8-pin SOIC, reducing board area when a measurement path requires a gain stage and a driver or buffer. A single +5 V supply can produce a 4.8 V output swing, while the input range includes ground for low-level unipolar signals. Instrument designers should still account for input offset, bias current, output swing at the actual load, and the calibration requirements of the complete measurement chain.

अनुशंसित उत्पादों का सारांश

OPA2634UA Same-family dual wideband amplifier option उपयोग में: Video Signal Amplification, Precision Instrumentation Signal Chain, Data Acquisition Front End, Test and Measurement Equipment OPA2634U Texas Instruments उपयोग में: Video Signal Amplification, Communications Interface Buffering, Data Acquisition Front End, Test and Measurement Equipment OPA2634UID Same-family wideband dual amplifier option उपयोग में: Communications Interface Buffering, Active Filtering and Signal Conditioning OPA2634UDB Same-family wideband instrumentation amplifier option उपयोग में: Precision Instrumentation Signal Chain, Active Filtering and Signal Conditioning
What is the OPA2634U?
The OPA2634U is a dual, wideband, voltage-feedback operational amplifier from Texas Instruments designed for +3 V or +5 V single-supply operation. According to the manufacturer datasheet, it operates across a 2.7 V to 10 V supply range, provides a 250 V/us slew rate, and uses a 5.6 nV/Hz input-voltage noise density. It is packaged in an 8-pin SOIC for standard surface-mount assembly.
What are the key specifications of OPA2634U that engineers should know?
The OPA2634U combines a 250 V/us slew rate, 5.6 nV/Hz input-voltage noise density, and 80 mA high output current in a dual 8-pin SOIC package. The Texas Instruments datasheet also identifies operation from 2.7 V to 10 V, an input range that includes ground, and a 4.8 V output swing on a +5 V supply. These characteristics position it for wideband signal amplification and moderate-load drive.
What is the supply voltage range of OPA2634U?
The OPA2634U operates from 2.7 V to 10 V and is intended for +3 V or +5 V single-supply systems. According to the Texas Instruments OPA2634 datasheet, its input range includes ground, making it useful for signals referenced close to the negative supply rail. The device also supports a 4.8 V output swing when operated from a +5 V supply.
What is the slew rate of OPA2634U?
The OPA2634U has a slew rate of 250 V/us. According to the Texas Instruments datasheet, this high slew rate allows the output to change rapidly while handling larger-amplitude signals. The specification is especially relevant in video, communications, and test-equipment circuits where insufficient slew rate can cause visible waveform distortion.
Can OPA2634U operate from a single 5 V supply?
Yes, the OPA2634U is designed to operate from a single +5 V supply, as well as from +3 V and other supplies within its 2.7 V to 10 V range. The manufacturer datasheet specifies a 4.8 V output swing on +5 V and an input range that includes ground, supporting single-supply signal chains without a negative rail.
How much output current can OPA2634U source?
The OPA2634U supports 80 mA high output current and is listed with a 73 mA output-current-per-channel rating. According to the Texas Instruments OPA2634 documentation, this output-drive capability is suitable for heavier loads than many low-power signal-conditioning amplifiers. Actual current depends on output amplitude, supply voltage, load impedance, and thermal conditions.
Where can I download the OPA2634U datasheet PDF?
The OPA2634U datasheet PDF can be opened through the manufacturer-linked documentation page for this component. The Texas Instruments OPA2634 datasheet contains the electrical characteristics, pin description, typical performance curves, and application information needed to evaluate the amplifier. Use the package drawing in that document when assigning PCB connections and layout.
Where is the OPA2634U pinout?
The OPA2634U pinout is defined in the pin-description table and package drawing of the Texas Instruments OPA2634 datasheet. The component uses an 8-pin SOIC package containing two voltage-feedback operational amplifiers. Use the manufacturer pin-description table when routing each amplifier's supply, input, output, and feedback connections.
OPA2634U vs OPA2634UA - which is the better choice?
OPA2634U and OPA2634UA belong to the same OPA2634 family and use the same 8-pin SOIC footprint, but their ordering codes and qualification details should be checked before substitution. The core characteristics associated with the family include a 250 V/us slew rate, 5.6 nV/Hz input noise, and an 80 mA high output-current capability. Choose the exact orderable part after reviewing its temperature grade and marking requirements.
When should I choose OPA2634U instead of a general-purpose operational amplifier?
Choose the OPA2634U when the circuit requires a 250 V/us slew rate, 5.6 nV/Hz input noise, or stronger output drive than a general-purpose amplifier provides. Its 2.7 V to 10 V supply range also supports +3 V and +5 V systems. A micropower or precision amplifier may be preferable when bandwidth, drive, or noise requirements are less demanding.
Is OPA2634U suitable for video and communications signal chains?
Yes, the OPA2634U is suitable for video and communications signal chains that benefit from a 250 V/us slew rate and wideband voltage-feedback operation. The input range includes ground, while the output can reach 4.8 V on a +5 V supply. Check the gain, load, and stability requirements in the application circuit before finalizing the design.
What can replace OPA2634U?
An OPA2634U replacement must use the same 8-pin SOIC footprint and preserve the electrical behavior needed by the circuit. A suitable candidate should maintain pin-to-pin compatibility, cover the required 2.7 V to 10 V supply range, and provide comparable 250 V/us slew rate, 5.6 nV/Hz noise, and 80 mA output-drive capability. Request a Quote for sourcing of the exact MPN.
Is there a drop-in replacement for OPA2634U?
Drop-in replacement of the OPA2634U requires more than matching the SOIC package. The substitute must preserve pin assignments and meet the circuit's bandwidth, supply, slew-rate, noise, output-current, and stability requirements. Family members such as OPA2634UA may share the footprint, but engineers should verify the exact orderable suffix and electrical grade before approving a substitution.
Where to buy OPA2634U online?
The OPA2634U can be requested through the Request a Quote form on this product page. Enter the exact OPA2634U orderable MPN, required quantity, and delivery constraints so the request can be matched against available supply. The component is specified in an 8-pin SOIC tube package, and the target MPN is not interchangeable with the OPA2634U/2K5 ordering code.
What is the price and lead time of OPA2634U?
Current OPA2634U pricing and lead time should be obtained through the Request a Quote form on this page rather than from a static listing. Include the required quantity, tube quantity, and target delivery date in the request. For technical substitution, remember that OPA2634U/2K5 is a different ordering code and should not be treated as the exact target MPN.

के लिए इंजीनियरिंग संदर्भ डेटा OPA2634U — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose OPA2634U when the design needs a dual, wideband voltage-feedback amplifier that operates from 2.7 V to 10 V and must preserve fast signal transitions. Its 250 V/us slew rate, 5.6 nV/Hz input noise, and 80 mA high output-current capability make it appropriate for video, communications, instrumentation, data-acquisition, and test-equipment stages. OPA2634UA, OPA2634UID, and OPA2634UDB are same-family 8-pin SOIC alternatives whose exact suffix-specific qualification and marking requirements must be checked before substitution. Use a micropower amplifier instead when energy efficiency dominates, or use a precision amplifier when offset and drift are more important than wideband drive. Package compatibility alone is not sufficient: confirm pin assignments, common-mode range, output swing, stability, and load behavior in the manufacturer documentation.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद OPA2634UA OPA2634UID OPA2634UDB
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Configuration Dual voltage-feedback operational amplifier Dual voltage-feedback operational amplifier Dual voltage-feedback operational amplifier Dual voltage-feedback operational amplifier
Supply Voltage Range 2.7 V to 10 V 2.7 V to 10 V 2.7 V to 10 V 2.7 V to 10 V
Slew Rate 250 V/us 250 V/us 250 V/us 250 V/us
Input Voltage Noise Density 5.6 nV/Hz 5.6 nV/Hz 5.6 nV/Hz 5.6 nV/Hz
High Output Current 80 mA 80 mA 80 mA 80 mA
Output Swing on +5 V Supply 4.8 V 4.8 V 4.8 V 4.8 V
Input Common-Mode Range Includes ground Includes ground Includes ground Includes ground
Number of Channels 2 2 2 2

मुख्य विशेषताएँ

  • High slew rate within a dual single-supply amplifier (बनामOPA2634UA)
  • Single-supply operation extends to 2.7 V (बनामOPA2634UID)
  • Low-noise wideband performance with substantial output drive (बनामOPA2634UDB)

डिज़ाइन नोट्स

Use separate bypass capacitors close to each amplifier's supply pins and connect the ground pins to a low-impedance ground plane. The OPA2634U supports 2.7 V to 10 V operation, but the usable supply range depends on the selected output amplitude, input common-mode range, and load current. Estimate power dissipation from the actual supply voltage and channel current before assigning copper area; the 250 V/us slew rate and 80 mA drive capability should not be interpreted as continuous full-current operation without thermal checks.

Place input, feedback, and decoupling components close to the corresponding SOIC pins to minimize parasitic capacitance and feedback-loop length. This is especially important because the OPA2634U's 250 V/us slew rate can expose layout-induced instability or ringing. Use the manufacturer pin-description table and typical-application circuits when assigning pins, and route output current away from sensitive input traces to reduce coupling.

Do not select an amplifier solely by package, bandwidth, or headline slew-rate rating. Confirm the exact pin assignments, supply range, input common-mode limits, output swing, load stability, offset, and bias-current requirements before approving a substitute. A 4.8 V output swing on +5 V does not imply rail-to-rail output, and an input range that includes ground does not by itself establish full rail-to-rail input operation.

For video, communications, or fast data-conversion interfaces, evaluate gain-bandwidth, slew-rate-limited settling, and capacitive loading together. The 250 V/us slew rate is valuable for large transitions, but it does not guarantee adequate accuracy for small-signal settling. Maintain short feedback paths, use the recommended resistor and capacitor values from the datasheet, and verify the completed circuit for oscillation with its actual source and load impedances.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance declarations are not stated in the manufacturer or distributor results. AEC-Q100 is reported as unknown because this industrial operational amplifier is not identified as an automotive-qualified variant.

डेटा सत्यापन तिथि: 2026-11-19 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

OPA2634U datasheet OPA2634U specifications OPA2634U pinout OPA2634U datasheet pdf OPA2634U SOIC-8 Texas Instruments OPA2634U OPA2634U 250 V/us OPA2634U 5.6 nV/Hz OPA2634U single supply amplifier OPA2634U video amplifier OPA2634U vs OPA2634UA OPA2634U equivalent OPA2634U replacement OPA2634U price OPA2634U stock

संबंधित कंपोनेंट्स और शब्द

Texas Instruments OPA2634U OPA2634UA OPA2634UID OPA2634UDB OPA2634 Operational Amplifier Voltage-Feedback Amplifier Dual Amplifier Wideband Amplifier Single-Supply Amplifier Analog Integrated Circuit Slew Rate Input Voltage Noise Density Output Current Supply Voltage Range Common-Mode Range Output Swing 8-pin SOIC SOIC package family Surface Mount Video Signal Amplification Communications Buffering Instrumentation Signal Chain Data Acquisition
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें