Texas Instruments

OPA2681N - 280MHz Dual Current Feedback Op Amp | Texas Instruments

MPN: OPA2681N ✓ सक्रिय
14-SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

OPA2681N अवलोकन

Texas Instruments OPA2681N is a dual current-feedback operational amplifier in a 14-SOIC package, with a stated bandwidth of 280 MHz. It is designed for wideband signal-chain applications where high speed, low distortion, and flexible gain-setting are important. The dual-circuit configuration provides two amplifiers in one package, allowing matched channels to be used in active filters, differential drivers, video and communications interfaces, instrumentation, and control systems. The current-feedback architecture is suited to high-speed closed-loop systems where slew behavior and large-signal bandwidth must remain useful beyond the low-frequency range.

An operational amplifier is an analog signal-processing IC that uses high-gain feedback to amplify or shape voltage signals. A voltage-feedback amplifier uses feedback to control a differential-input error voltage, while a current-feedback amplifier senses current through its feedback network. The current-feedback approach is associated with high-speed amplification because it can maintain useful large-signal bandwidth as gain increases. The OPA2681N therefore belongs to the broad operational-amplifier and signal-conditioning hierarchy rather than to precision low-noise or micropower regulator families.

The principal verified characteristics are its dual-amplifier configuration, 280 MHz stated bandwidth, current-feedback topology, and 14-SOIC package. The package provides a compact surface-mount implementation for high-speed analog and mixed-signal circuits. Because this product is intended for wideband use, PCB layout is as important as the nominal bandwidth: short feedback paths, controlled ground return paths, appropriate decoupling, and minimization of parasitic capacitance help preserve signal integrity. The two amplifier channels should be evaluated for channel matching when the application depends on common-mode rejection, gain consistency, or differential signal cancellation.

Typical uses include active filters, video and communications signal conditioning, waveform-generation and measurement circuits, communications transceivers, analog instrumentation, and active impedance or termination networks. Current-feedback amplifiers are particularly useful when the signal has meaningful high-frequency content and when the required closed-loop gain is higher than the bandwidth divided by a conservative gain-bandwidth assumption. The circuit designer must select resistor values according to the manufacturer’s recommended feedback network rather than treating the amplifier as an ideal voltage-feedback device.

For a new design, begin with the manufacturer datasheet, verify the exact pin functions and disable behavior, and reproduce the recommended power-supply decoupling and feedback topology. The disable function should be checked against the system power-management requirements. When replacing an existing amplifier, verify package pinout, supply range, input and output headroom, output-current capability, disable logic, and stability with the actual load before treating it as a drop-in substitution.

This page combines the verified OPA2681N identity, package, topology, and bandwidth information with application guidance, comparison structure, and replacement-selection considerations. It is designed to help engineers move from part identification to circuit-level validation without relying solely on a catalog listing or an unstructured component-search result.

के लिए ड्रॉप-इन विकल्प OPA2681N — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

OPA2681N-1

✅ ड्रॉप-इन
📦 14-SOIC
Same 14-SOIC current-feedback family; electrical differences are limited to a maximum 10% rating variation for the documented replacement candidate.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA2681N/2K5

✅ ड्रॉप-इन
📦 14-SOIC
Same 14-SOIC dual current-feedback architecture; ordering or reel quantity differs, with no electrical difference documented.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA2681N Maximum Ratings और Electrical Characteristics

Manufacturer Texas Instruments
MPN OPA2681N
Device Type Operational Amplifier
Amplifier Configuration Dual
टोपोलॉजी Current Feedback
Stated Bandwidth 280 MHz
पैकेज 14-SOIC
Number of Circuits 2 circuits
माउंटिंग प्रकार Surface Mount
Product Description Current Feedback Amplifier 2 Circuit 14-SOIC
Series SpeedPlus
Disable Function Yes

OPA2681N 14-soic पिन कॉन्फ़िगरेशन गाइड

OPA2681N (14-soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

OPA2681N के लिए 14-soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: OPA2681N.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

OPA2681N के लिए उपयुक्त है 6 अनुप्रयोगs: Wideband Active Filters, Communications Signal Conditioning, Video Amplification, Instrumentation Signal Conditioning, Active Termination Networks, Precision Waveform Generation.

⚡

Wideband Active Filters

OPA2681N fits high-speed active-filter stages because its stated 280 MHz bandwidth and current-feedback architecture support wideband signal shaping. Each channel can implement a filtering section when the circuit operates at frequencies where the selected gain, feedback resistor, source impedance, and load are compatible with the manufacturer’s stability guidance. The practical benefit is the availability of two amplifiers in one 14-SOIC package, reducing board area and supporting channel matching. However, high-speed filter design requires short PCB traces, grounded return paths, stable component tolerances, and parasitics-aware simulation. Verify the complete frequency response on the assembled board because the nominal 280 MHz device bandwidth does not by itself determine the usable filter bandwidth.

🌐

Communications Signal Conditioning

OPA2681N is suitable for communications signal conditioning, gain adjustment, and impedance-conversion stages that require a wideband analog amplifier. The 280 MHz stated bandwidth allows the device to process signals well beyond audio-frequency limits, while the current-feedback topology is intended to maintain useful large-signal behavior at higher closed-loop gains. The dual 14-SOIC package supports two related channels in compact communication equipment. Designers must choose feedback values from the manufacturer’s guidance and control trace length, supply return paths, and output loading. Confirm input/output headroom and disable-state requirements against the communications link before releasing the circuit.

📺

Video Amplification

OPA2681N can serve in video and composite-signal amplification paths where a high-speed dual amplifier is useful for gain adjustment, termination, or active filtering. Its stated 280 MHz bandwidth is the principal reason to prefer this device over a low-speed general-purpose op amp, while the two-circuit package can implement matched processing channels. The design must preserve signal integrity through short traces, a continuous ground reference, and decoupling placed close to the supply pins. Because video systems can be sensitive to gain accuracy, overshoot, and channel mismatch, evaluate the complete source and load network and compare the measured output against the required video bandwidth before production.

🔧

Instrumentation Signal Conditioning

OPA2681N is useful in instrumentation front ends when the measured signal requires wideband amplification ahead of sampling, detection, or comparison. The 280 MHz stated bandwidth can support higher-frequency signals than conventional precision op amps, and the dual configuration can process two related channels. Current-feedback operation requires feedback-network selection according to the manufacturer’s recommendations, and the final error budget must include offset, noise, bias current, output swing, and load-dependent behavior. For low-level measurement channels, first confirm that the wideband architecture does not compromise the required accuracy, then validate noise, settling, and common-mode performance on the target board.

📡

Active Termination Networks

OPA2681N can be used in active termination or impedance-conversion networks for high-speed lines and test equipment. Its current-feedback architecture and stated 280 MHz bandwidth allow it to implement feedback-controlled termination rather than relying only on passive resistors. This can improve signal integrity when the source and load impedances are poorly matched, particularly in instrumentation and communications equipment. The two amplifier channels in a 14-SOIC package provide compact implementation for paired or complementary networks. Validate output-current capability, output-voltage headroom, and loop stability against the terminated line. Keep the feedback trace short and place any compensation or termination components according to the manufacturer’s recommended layouts.

📈

Precision Waveform Generation

OPA2681N fits precision waveform-generation buffers when the required output bandwidth approaches the capabilities of general-purpose amplifiers. Its stated 280 MHz bandwidth supports fast edges and wideband waveform fidelity, while current feedback makes the device appropriate for the high-speed gain stages often used in arbitrary-waveform and pulse-generation systems. The dual package allows two buffered outputs to be driven by separate stages. Designers should select resistor values and gain settings from the manufacturer’s recommended feedback network, then verify output swing and load stability. High-frequency PCB routing, grounding, and decoupling are critical because otherwise the practical waveform may be limited by the board rather than the amplifier.

What is OPA2681N?
OPA2681N is a Texas Instruments dual current-feedback operational amplifier with a stated bandwidth of 280 MHz, packaged in a 14-SOIC. According to the OPA2681 manufacturer datasheet, it is part of the SpeedPlus wideband family and includes a disable function. Two independent amplifier circuits are provided in one package for high-speed signal conditioning, filtering, communications, instrumentation, and video applications.
What is the bandwidth of OPA2681N?
The stated bandwidth of OPA2681N is 280 MHz. The manufacturer describes the device as a dual wideband current-feedback operational amplifier. According to the OPA2681 manufacturer datasheet, the 280 MHz figure describes the device’s high-speed capability, while usable closed-loop bandwidth in a practical circuit depends on the selected gain, feedback resistor, output-load network, and board parasitics.
Why is OPA2681N a current-feedback operational amplifier?
OPA2681N uses current feedback rather than conventional voltage-feedback error correction. According to the OPA2681 manufacturer datasheet, current-feedback amplifiers are optimized for wideband signal paths and can preserve useful large-signal performance at higher closed-loop gains. The feedback-network values and stability conditions must follow the manufacturer’s guidance rather than a standard voltage-feedback resistor rule.
Where can I download the OPA2681N datasheet PDF?
The OPA2681N datasheet PDF is available through the Texas Instruments product documentation linked from the component’s manufacturer materials and the supplied manufacturer-oriented PDF URL. According to the OPA2681 manufacturer datasheet, the document contains the pin description, electrical characteristics, disable information, typical performance curves, and recommended application circuits. Use the manufacturer document for final design validation.
Where can I find the OPA2681N pinout?
The OPA2681N pinout is shown in the pin-description section of the manufacturer datasheet, with the complete device presented in a 14-SOIC package. The product listing identifies the package as 14-SOIC. Use the datasheet pin-description table when assigning power, ground, input, output, and disable connections; package family similarity alone is not sufficient to assume identical pin functions.
Is OPA2681N suitable for high-speed active filters?
OPA2681N is suitable for many high-speed active-filter stages because its stated bandwidth is 280 MHz and it uses a current-feedback topology. According to the OPA2681 manufacturer datasheet, the design must use the recommended feedback network and account for the amplifier’s stability characteristics. Filter component tolerances, parasitic capacitance, and source and load impedances can determine whether the practical filter response matches the simulation.
What is OPA2681N used for in communications and video circuits?
OPA2681N is used in communications and video circuits as a high-speed dual amplifier for signal conditioning, gain adjustment, impedance conversion, and active filtering. Its stated 280 MHz bandwidth and current-feedback architecture suit wideband analog paths. According to the OPA2681 manufacturer datasheet, layout, feedback values, output loading, and supply bypassing must be controlled to maintain signal integrity.
Can OPA2681N be used for precision measurement?
OPA2681N can be used in measurement systems when the required bandwidth and signal amplitude justify a current-feedback amplifier. The device is optimized for wideband amplification rather than being identified in the product listing as a dedicated precision amplifier. According to the OPA2681 manufacturer datasheet, offset, bias current, noise, input common-mode range, and output swing must be checked against the measurement error budget.
What is the best drop-in replacement for OPA2681N?
OPA2681N-1 is the closest documented same-family replacement candidate because it is identified as a Burr Brown current-feedback amplifier in a 14-SOIC package. Its broader electrical equivalence must still be confirmed against the OPA2681 manufacturer datasheet. The Request a Quote form on this page can be used to check current availability, while final substitution requires verification of pinout, bandwidth, supply range, disable logic, and stability.
What can replace OPA2681N?
OPA2681N-1 is the principal documented replacement candidate in the same 14-SOIC current-feedback family, with OPA2681N/2K5 also appearing as a related 14-SOIC ordering designation. These candidates must be checked for exact electrical ratings and lifecycle status before substitution. OPA2604AU and OPA3682U are not automatically drop-in options because their package or channel-count requirements differ.
OPA2681N vs OPA2604AU — which is better for a wideband circuit?
OPA2681N is the more direct choice when a dual, 14-SOIC current-feedback amplifier with a stated 280 MHz bandwidth is required. The supplied comparison results identify OPA2604AU as a related device, but they do not establish identical pin compatibility. According to the respective manufacturer documentation, verify package pins, bandwidth, supply range, disable behavior, and feedback-network requirements before selecting OPA2604AU.
OPA2681N vs OPA3682U — can the OPA3682U replace OPA2681N?
OPA3682U is not a confirmed drop-in replacement for OPA2681N because the supplied comparison identifies OPA3682U as a 16-SOIC part while OPA2681N is a dual amplifier in a 14-SOIC package. According to the product descriptions, their package footprints differ, so an unmodified PCB replacement is not appropriate. OPA3682U may still be considered during a redesign if its electrical characteristics meet the circuit requirements.
When should I choose OPA2681N over a general-purpose op amp?
Choose OPA2681N when the signal path needs high bandwidth and the circuit can use a current-feedback feedback network. Its stated 280 MHz bandwidth is substantially more appropriate for high-speed closed-loop signal conditioning than a general-purpose precision amplifier. According to the OPA2681 manufacturer datasheet, confirm stable operation with the intended gain, load, and feedback values before finalizing the design.
Is OPA2681N in stock and what is the lead time?
Current stock quantity and lead time should be requested through the Request a Quote form on this page because availability can change independently of the component specifications. The product listing states that the part can ship today, but this statement is not treated as a guaranteed stock commitment. Share the required quantity, date code preference, and target package suffix when requesting a quotation.
What is the price of OPA2681N?
The current OPA2681N price should be requested through the Request a Quote form on this page so the response reflects the required quantity, date-code preference, and packaging suffix. The supplied listings identify the part and its distributor channels but do not provide a complete explicit quantity-break price table for this exact MPN. The structured price-evidence field therefore contains no extracted tiers.
Where can I buy OPA2681N online?
Use the Request a Quote form on this page to request OPA2681N availability, pricing, and lead time. The form captures the commercial request without relying on a static catalog quantity-break table. For engineering records, the OPA2681 manufacturer datasheet and the manufacturer-linked product listing provide the authoritative identity, 280 MHz bandwidth statement, current-feedback topology, and 14-SOIC package information.
What are the key specifications of OPA2681N that engineers should know?
The key verified OPA2681N specifications are its dual-amplifier configuration, current-feedback topology, 280 MHz stated bandwidth, SpeedPlus family designation, disable function, and 14-SOIC surface-mount package. According to the OPA2681 manufacturer datasheet, those headline characteristics position it for wideband signal conditioning. Supply range, offset, bias current, slew rate, output current, and temperature limits must be taken from the electrical-characteristics table for the final design.

के लिए इंजीनियरिंग संदर्भ डेटा OPA2681N — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose OPA2681N for wideband dual-channel signal conditioning where a current-feedback topology, 280 MHz stated bandwidth, and 14-SOIC package are required. OPA2681N-1 is the closest documented same-family replacement candidate and may be preferred when its exact electrical ratings and ordering conditions meet the design; verify the manufacturer datasheet before substitution. OPA2681N/2K5 offers the same documented architecture, bandwidth, and package with a different ordering or reel quantity. OPA2604AU should be considered only after its pinout and electrical characteristics are verified because it is not established as an identical 14-SOIC drop-in by the supplied comparison results. OPA3682U is not a drop-in option because its 16-SOIC package differs. For any substitution, check pin functions, supply range, disable logic, feedback-network values, output swing, load stability, and lifecycle status rather than relying on amplifier type alone.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद OPA2681N-1 OPA2681N/2K5
Manufacturer Texas Instruments Texas Instruments / Burr Brown Texas Instruments
Brand Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC - same 14-SOIC - same
Amplifier Configuration Dual Dual Dual
Topology Current Feedback Current Feedback Current Feedback
Stated Bandwidth 280 MHz 280 MHz 280 MHz
Series SpeedPlus SpeedPlus SpeedPlus
Disable Function Yes Yes Yes

मुख्य विशेषताएँ

  • Same-package dual current-feedback replacement options (बनामOPA2681N-1)
  • Documented 280 MHz wideband capability (बनामOPA2681N/2K5)
  • Two high-speed amplifiers in one package (बनामOPA2681N-1)

डिज़ाइन नोट्स

Keep input, output, and feedback paths short and continuous because the 280 MHz stated bandwidth makes PCB inductance and capacitance significant. Use a solid ground reference, avoid routing high-speed signals over split plane boundaries, and place decoupling capacitors close to the relevant supply pins. Match trace geometry between the two channels when differential or common-mode cancellation depends on channel consistency.

Do not choose feedback resistors using a generic voltage-feedback design rule. Current-feedback amplifiers require the manufacturer’s recommended feedback-network values and gain-dependent stability analysis. Confirm the final circuit with the intended source impedance, load capacitance, output current, and supply voltage. A PCB that appears correct at low frequency may become unstable when the amplifier drives a long cable, capacitive load, or high-speed probe.

Decouple each supply connection close to the device and use the manufacturer’s recommended power-supply arrangement. Because OPA2681N is a high-speed amplifier, supply-impedance interaction can affect output behavior and stability. Provide local ground return paths for output-current transients rather than relying on distant plane connections. Validate the disable function and power-up sequence to prevent uncontrolled output conditions in the final system.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance attributes require confirmation from the manufacturer product page or the current manufacturer declaration. The supplied product listings identify the part, topology, bandwidth, and package but do not explicitly state the required compliance results.

डेटा सत्यापन तिथि: 2026-11-09 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

OPA2681N datasheet OPA2681N datasheet pdf OPA2681N pinout OPA2681N specifications Texas Instruments OPA2681N OPA2681N 280MHz amplifier OPA2681N 14-SOIC OPA2681N current feedback op amp OPA2681N active filter application OPA2681N vs OPA2604AU OPA2681N vs OPA3682U OPA2681N drop-in replacement OPA2681N price OPA2681N stock and lead time

संबंधित कंपोनेंट्स और शब्द

Texas Instruments OPA2681N OPA2681N-1 OPA2681N/2K5 OPA2604AU OPA3682U operational amplifier current-feedback amplifier voltage-feedback amplifier dual amplifier wideband amplifier signal conditioning active filter 14-SOIC SOIC package family surface-mount package SpeedPlus disable function feedback network 280 MHz bandwidth video signal conditioning communications signal conditioning instrumentation waveform generation active termination
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें