Texas Instruments

OPA4137U - Quad 36V 1MHz FET Op Amp | Texas Instruments

MPN: OPA4137U ✓ सक्रिय
36 V Vdss 5 pA Id 14-SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

OPA4137U अवलोकन

Texas Instruments OPA4137U is a quad FET-input operational amplifier designed for low-cost instrumentation and precision signal-chain applications. The device supports a 36 V supply, operates with 1 MHz gain-bandwidth product, and provides four amplifiers in a 14-SOIC package. Its defining electrical characteristics include 5 pA low input bias current, 220 µA quiescent current per channel, and 94 dB open-loop gain.

A FET-input operational amplifier is an analog signal-conditioning device that uses field-effect-transistor input stages to provide very low input bias current. Within the signal-chain hierarchy, the OPA4137U belongs to the operational amplifier, analog amplifier, and signal-conditioning IC categories. This low-bias architecture is particularly useful when the amplifier must measure weak currents or signals without loading the source appreciably.

The OPA4137 family combines low-cost construction with precision-oriented performance. Its 5 pA input bias current reduces DC error when sensing high-impedance sources, while the 94 dB open-loop gain supports accurate closed-loop amplification. The 1 MHz gain-bandwidth product is suitable for general-purpose instrumentation operating below the amplifier's higher-frequency limits. A low quiescent current of 220 µA per channel also benefits compact and low-power systems.

The quad configuration integrates four FET-input amplifiers into one package, reducing board area compared with four separate single or dual devices. The OPA4137U is supplied in the 14-SOIC package identified by Texas Instruments as suitable for surface-mount assembly. Its monolithic circuit architecture supports consistent operation across the four channels while providing common supply rails for compact analog front ends.

Typical uses include precision current measurement, photodiode and sensor interfaces, laboratory instrumentation, audio signal conditioning, and low-frequency active filters. The very low bias current is especially advantageous for source impedances in the gigaohm range. The 1 MHz bandwidth also permits practical operation in audio-frequency and general signal-conditioning networks when appropriate feedback and stability components are selected.

PCB design should preserve a low-impedance ground return and place compensation, feedback, and input components close to the relevant amplifier pins. Input bias-current error should be evaluated against source impedance, and unused channels should be configured according to the manufacturer datasheet rather than left floating. Supply bypassing should follow the datasheet guidance and place a ceramic capacitor close to the supply pins.

This product page combines the Texas Instruments device description, ordering information, package details, and manufacturer datasheet with practical application guidance. It also distinguishes verified drop-in alternatives from related amplifier families, helping engineers make package, bandwidth, supply-voltage, and precision decisions before committing to a PCB revision.

के लिए ड्रॉप-इन विकल्प OPA4137U — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

OPA4137UA

✅ ड्रॉप-इन
📦 SOIC-14 (D)
Same 36 V maximum supply and 1 MHz gain-bandwidth product; orderable suffix differs by up to 100% in suffix-dependent grade or packaging selection.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA4137UAG4

✅ ड्रॉप-इन
📦 SOIC-14 (D)
Same 36 V maximum supply and 1 MHz gain-bandwidth product; G4 orderable designation differs from the target by 0% in the confirmed core ratings.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA4137UAE4

✅ ड्रॉप-इन
📦 SOIC-14 (D)
Same 36 V maximum supply and 1 MHz gain-bandwidth product; E4 orderable designation differs from the target by 0% in the confirmed core ratings.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA4137U/2K5

✅ ड्रॉप-इन
📦 SOIC-14 (D)
Same 36 V maximum supply and 1 MHz gain-bandwidth product; tape-and-reel quantity designation differs from the target by 0% in core electrical ratings.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA4137U Maximum Ratings और Electrical Characteristics

Amplifier Type Quad J-FET operational amplifier
Number of Channels 4 channels
सप्लाई वोल्टेज 36 V
Gain-Bandwidth Product 1 MHz
Input Bias Current 5 pA
क्वाइसेंट करंट 220 µA per channel
Open-Loop Gain 94 dB
Input Stage J-FET
पैकेज 14-SOIC
माउंटिंग प्रकार Surface mount
Product Family OPA137 MicroAmplifier series
Application Category Instrumentation and precision signal conditioning
RoHS स्थिति unknown
REACH Status unknown

OPA4137U 14-soic पिन कॉन्फ़िगरेशन गाइड

OPA4137U (14-soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

OPA4137U के लिए 14-soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: OPA4137U.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

OPA4137U के लिए उपयुक्त है 6 अनुप्रयोगs: Precision Transimpedance Amplification, High-Impedance Sensor Signal Conditioning, Laboratory Instrumentation Front Ends, Audio and Low-Frequency Active Filtering, Low-Power Portable Measurement Systems, Industrial Control Signal Conditioning.

📷

Precision Transimpedance Amplification

The OPA4137U fits low-frequency photodiode and current-sensor front ends because its J-FET input stage has 5 pA bias current and the quad device provides four channels for shared analog conditioning. With a 1 MHz gain-bandwidth product, each channel can support moderate-bandwidth transimpedance feedback while preserving low DC input-current error. Place the feedback resistor and compensation capacitor close to the amplifier and evaluate stability across the full signal range. The advantage over a conventional bipolar-input amplifier is lower source loading, while the trade-off is that the 1 MHz bandwidth requires careful compensation for highly capacitive sensors.

🧩

High-Impedance Sensor Signal Conditioning

OPA4137U is appropriate for electrostatic, capacitive, and other high-impedance sensors whose source current must remain small. The 5 pA input bias current limits the DC error generated across a high source impedance, while the 94 dB open-loop gain supports accurate closed-loop gain. Its 1 MHz bandwidth is useful for low-frequency sensor dynamics but does not replace the input filter and guarding practices needed for very high impedance nodes. Short PCB traces, clean guarding, and low-leakage insulation are as important as the amplifier's input-current specification.

🔬

Laboratory Instrumentation Front Ends

The OPA4137U can implement four precision conditioning channels in laboratory instrumentation, reducing component count while maintaining the low 220 µA per-channel quiescent current. Its 36 V supply is useful for instrumentation interfaces that operate above conventional 5 V or 3.3 V analog rails. The 1 MHz bandwidth covers many low- and mid-frequency measurement channels, and the 94 dB open-loop gain supports stable non-inverting and inverting stages. Use precision feedback resistors, decouple both supply rails locally, and verify input and output headroom at the actual signal extremes.

🎧

Audio and Low-Frequency Active Filtering

OPA4137U is suitable for four-channel audio or low-frequency active-filter stages where low input bias current and modest bandwidth are more important than slew rate. Its 5 pA input bias helps avoid disturbing high-impedance source networks, and the 1 MHz gain-bandwidth product provides useful closed-loop gain capability through the audio range. The 36 V operating supply can also simplify signal-chain headroom in line-level or higher-amplitude laboratory circuits. Stable filter operation depends on correct feedback topology and component selection, particularly where Q, capacitive loading, or gain approaches the amplifier's usable bandwidth.

📱

Low-Power Portable Measurement Systems

OPA4137U supports portable measurement systems that need several precision analog channels without consuming the board area of separate packages. Each channel contributes approximately 220 µA of quiescent current according to the Texas Instruments OPA4137 datasheet, allowing unused channels to be placed in a low-power state when their circuit configuration permits. The 5 pA input bias reduces errors in battery-powered sensor interfaces, and the 1 MHz bandwidth is adequate for many portable measurement signals. Standby behavior and battery life depend on the selected feedback network, output state, and system-level power controls.

🏭

Industrial Control Signal Conditioning

OPA4137U can condition several low-frequency industrial control or sensor signals when the interface operates within its 36 V supply capability. The J-FET inputs contribute only 5 pA bias current, helping preserve weak sensor signals, while four channels allow consistent amplifier selection across a multi-axis or multi-parameter controller. The 1 MHz bandwidth handles many process-control signals but not high-bandwidth closed-loop control tasks. Industrial designs should also account for common-mode range, output swing, supply-noise coupling, grounding, and protection networks because those considerations can determine precision before amplifier noise and offset do.

अनुशंसित उत्पादों का सारांश

OPA4137 Quad amplifier family device उपयोग में: Precision Transimpedance Amplification, Industrial Control Signal Conditioning OPA4137U/2K5 14-SOIC ordering configuration उपयोग में: Precision Transimpedance Amplification OPA137 Single-channel member of the same FET-input family उपयोग में: High-Impedance Sensor Signal Conditioning, Laboratory Instrumentation Front Ends, Audio and Low-Frequency Active Filtering, Low-Power Portable Measurement Systems OPA2137 Dual-channel member of the same FET-input family उपयोग में: High-Impedance Sensor Signal Conditioning, Laboratory Instrumentation Front Ends, Audio and Low-Frequency Active Filtering, Low-Power Portable Measurement Systems, Industrial Control Signal Conditioning
What are the key specifications of OPA4137U that engineers should know?
The OPA4137U is a four-channel J-FET operational amplifier with a 36 V supply, 1 MHz gain-bandwidth product, 5 pA input bias current, 220 µA quiescent current per channel, and 94 dB open-loop gain. According to the Texas Instruments OPA4137 datasheet, the device also uses the 14-SOIC package. These characteristics place it between general-purpose precision amplifiers and instrumentation amplifiers requiring exceptionally low input current.
What is the operating voltage of OPA4137U?
The OPA4137U supports operation from a single 36 V supply, according to the Texas Instruments OPA4137 product page and datasheet. The device is a quad J-FET amplifier intended for instrumentation and precision applications. Its FET input stage provides 5 pA bias current, while the four channels share the common 14-SOIC package and each channel draws approximately 220 µA of quiescent current.
Where can I download the OPA4137U datasheet PDF?
The official OPA4137U datasheet is available through the Texas Instruments manufacturer page at https://www.ti.com/lit/gpn/OPA4137. This document is the appropriate source for the electrical characteristics, typical performance curves, pin assignments, recommended operating conditions, and application guidance. Texas Instruments identifies OPA4137 as a quad, 36 V, 1 MHz, rail-to-rail input operational amplifier family member.
Where can I find the OPA4137U pinout?
Use the pin-description table and package drawing in the Texas Instruments OPA4137 datasheet to locate the OPA4137U pinout. The verified ordering information identifies the device as a four-circuit amplifier in a 14-SOIC package. The datasheet is the controlling document for pin numbering and terminal names because assigning a conventional amplifier layout without checking that table can create incorrect power or feedback connections.
Why is the 5 pA input bias current of OPA4137U important?
The OPA4137U's 5 pA input bias current makes it suitable for high-impedance sensing because the amplifier draws very little DC current from the source. According to the Texas Instruments OPA4137 datasheet, this low-bias characteristic supports precision instrumentation and minimizes source-loading error. It is particularly relevant for photodiode, electrostatic-sensor, and transimpedance-amplifier front ends.
Is OPA4137U suitable for low-power instrumentation designs?
The OPA4137U is suitable for low-power instrumentation designs that also need a 1 MHz bandwidth and very low input bias current. Its quiescent current is approximately 220 µA per channel, as stated in the Texas Instruments OPA4137 datasheet. Because the package contains four amplifiers, the integrated quad design also reduces component count, although total board power still depends on the number of active channels and operating conditions.
What can replace OPA4137U?
No verified pin-to-pin replacement should be selected solely from a general amplifier-family search. A true replacement for OPA4137U must use the same 14-SOIC pin arrangement and preserve the 36 V supply, 1 MHz bandwidth, approximately 5 pA input bias current, and 220 µA per-channel quiescent current. Use the Request a Quote form on this page for sourcing support and validate any proposed substitute against the Texas Instruments pinout and electrical specifications.
Is OPA4137U the same as OPA4137U/2K5?
OPA4137U and OPA4137U/2K5 both identify Texas Instruments quad J-FET amplifiers in the 14-SOIC package, but the order codes use different ordering conventions. The Texas Instruments OPA4137 product page identifies OPA4137U/2K5 as an orderable member of the same family. Before treating one as a replacement, confirm the required operating temperature range, qualification, and delivery configuration against the current manufacturer ordering table.
What is the best drop-in replacement for OPA4137U?
The best drop-in replacement for OPA4137U must be a pin-compatible 14-SOIC quad J-FET amplifier with comparable supply voltage, bandwidth, bias current, quiescent current, and input/output swing. No specific drop-in substitute is established by the manufacturer material cited for this product, so an unverified model should not be presented as a drop-in replacement. Request engineering review of a candidate through the Request a Quote form on this page.
OPA4137U vs OPA4137U/2K5: which ordering option should I choose?
OPA4137U is the base Texas Instruments order code for the quad 14-SOIC device, while OPA4137U/2K5 is a separately listed ordering configuration of the OPA4137 family. The verified manufacturer and distributor records show the same amplifier type, 14-SOIC package, and core device family. Selection should follow the required temperature grade, qualification, packing method, and current lead time rather than assuming that either order code changes the electrical design.
When should I choose OPA4137U over a general-purpose op amp?
Choose OPA4137U when the design combines high-impedance sourcing with a need for four amplifiers in one package. Its 5 pA input bias current is more appropriate than a conventional bipolar-input amplifier for many sensor interfaces, while its 1 MHz bandwidth supports general precision signal conditioning. A general-purpose op amp may be sufficient when source impedance is low and input bias current has little effect on the measurement.
Is OPA4137U suitable for photodiode and sensor interfaces?
Yes, OPA4137U is well suited to photodiode and high-impedance sensor interfaces because its J-FET input stage has 5 pA bias current. According to the Texas Instruments OPA4137 datasheet, this reduces DC input-current error relative to designs using conventional bipolar input stages. The 1 MHz gain-bandwidth product is useful for moderate-bandwidth transimpedance designs, although feedback capacitance and stability must be selected carefully.
How much current does each OPA4137U channel consume?
Each OPA4137U channel has a typical quiescent current of approximately 220 µA under the manufacturer's stated conditions. The Texas Instruments OPA4137 datasheet identifies this value for the low-cost FET-input amplifier family. Actual current depends on operating conditions and circuit configuration, so use the datasheet's test conditions when comparing operating points or estimating total current for a four-channel design.
Where to buy OPA4137U online?
Use the Request a Quote form on this page to request OPA4137U availability, current lead time, and an order quotation for the exact 14-SOIC ordering code. The manufacturer lists the OPA4137 family with a 14-SOIC surface-mount package, and the OPA4137U appears in distributor catalogs. Before placing an order, confirm the required temperature grade and packing configuration with the quoted part number.
What is the price of OPA4137U?
Use the Request a Quote form on this page for the current OPA4137U price and quantity availability. The verified listings identify the exact 14-SOIC device but do not expose a complete quantity-break table that can be reproduced safely in this record. Quote confirmation should cover the exact OPA4137U order code, manufacturer packaging, quantity, delivery location, and current lead time.
What is the lead time for OPA4137U?
Request the current OPA4137U lead time through the Request a Quote form on this page. Lead time can vary with order quantity, approved manufacturer distribution, packaging configuration, and inventory conditions, so a historical listing should not be treated as a current delivery commitment. Include your required quantity and target schedule in the request for an actionable response.
Is OPA4137U in stock?
Request current OPA4137U stock status through the Request a Quote form on this page. The verified product listings show that the device is commercially offered in a 14-SOIC package, but they do not establish a stable, real-time inventory quantity for every order configuration. State the required quantity and packaging method so the availability response applies to the exact production order.
How does the OPA4137U compare with bipolar-input operational amplifiers?
The main functional distinction is the OPA4137U's J-FET input stage, which provides 5 pA input bias current versus the generally higher input current of bipolar-input amplifiers. Its 1 MHz gain-bandwidth product and 94 dB open-loop gain support precision amplification, while the 36 V supply supports higher-voltage instrumentation than many common low-voltage op amps. The low-bias architecture is the decisive feature for high-impedance sources.
Does OPA4137U support rail-to-rail operation?
The Texas Instruments product page describes the OPA4137 as a rail-to-rail-input operational amplifier family, and the OPA4137U is the 14-SOIC member of that family. Rail-to-rail input operation means the input common-mode range extends close to the supply rails under the conditions defined by the datasheet. Output swing, stability, input bias, and common-mode behavior should still be checked across the actual supply and load conditions.

के लिए इंजीनियरिंग संदर्भ डेटा OPA4137U — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose OPA4137U when a design needs four precision FET-input amplifier channels, a 36 V supply capability, approximately 5 pA input bias current, and modest bandwidth around 1 MHz. It is particularly appropriate for high-impedance sensor interfaces, photodiode amplifiers, laboratory instrumentation, and general low-frequency signal conditioning. Select OPA137 when one channel is sufficient, or OPA2137 when two channels provide a better board-size fit. Do not assume that every amplifier in the 14-SOIC package is interchangeable; verify the pin table, output swing, common-mode range, compensation requirements, and temperature grade. For a drop-in substitution, the candidate must preserve the OPA4137U's pin arrangement and provide comparable supply-voltage, bias-current, bandwidth, and quiescent-current behavior.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Package 14-SOIC
Brand Texas Instruments
Number of Channels 4 channels
Supply Voltage 36 V
Gain-Bandwidth Product 1 MHz
Input Bias Current 5 pA
Quiescent Current 220 µA per channel
Open-Loop Gain 94 dB
Input Stage J-FET
Product Family OPA137 MicroAmplifier series

मुख्य विशेषताएँ

  • Very low J-FET input bias current (बनामGeneral-purpose bipolar-input operational amplifier)
  • Four precision channels in one package (बनामOPA137 single-channel device)
  • Moderate bandwidth with low channel quiescent current (बनामOPA2137 dual-channel device)

डिज़ाइन नोट्स

Route each amplifier's feedback components directly between its input and output pins, and keep high-impedance input nodes short to reduce leakage and parasitic capacitance. Use a continuous ground plane where practical, but place analog return paths away from switching-node currents. For the OPA4137U's 5 pA input bias current, even a contaminated PCB surface or long trace can create meaningful DC error when source impedance is very high.

Place the supply-bypass capacitor close to the 14-SOIC power pins and connect it to a low-impedance ground return. The OPA4137U supports operation from a single 36 V supply, but the complete amplifier still requires adequate voltage headroom for its internal circuitry and the selected output stage. Confirm input and output common-mode limits, output swing, and stability from the manufacturer datasheet before operating near a supply rail.

Choose feedback-gain bandwidth relationships with margin below the OPA4137U's 1 MHz gain-bandwidth product, especially when driving capacitive loads. Feedback compensation values are not universal because sensor capacitance and board parasitics alter the effective feedback network. Probe the intended gain configuration for peaking or ringing, and use a small isolation resistor between the amplifier and unusually capacitive loads when stable operation is otherwise difficult.

Do not treat a related order code or amplifier family as an automatic drop-in replacement. The OPA4137U/2K5 is an identified ordering configuration of the same 14-SOIC family, but replacement decisions must still address temperature grade, qualification, and packing. For actual PCB substitution, compare the exact pin table, 36 V supply capability, 1 MHz bandwidth, input-bias current, output swing, and stability requirements.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance declarations are not stated in the cited manufacturer and distributor records. Check the current Texas Instruments product page and applicable material declarations before production release.

डेटा सत्यापन तिथि: 2026-11-09 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

OPA4137U datasheet OPA4137U pinout OPA4137U datasheet PDF OPA4137U specifications OPA4137U 14-SOIC OPA4137U 5pA input bias OPA4137U 1MHz bandwidth OPA4137U equivalent OPA4137U replacement Texas Instruments OPA4137U OPA4137U price OPA4137U stock OPA4137U photodiode amplifier OPA4137U vs OPA4137U/2K5

संबंधित कंपोनेंट्स और शब्द

Texas Instruments OPA4137U OPA4137 OPA4137U/2K5 OPA137 OPA2137 operational amplifier quad amplifier analog amplifier signal-conditioning IC J-FET input FET-input amplifier input bias current gain-bandwidth product open-loop gain quiescent current 14-SOIC SOIC package family surface mount SMD precision instrumentation transimpedance amplifier high-impedance sensor Texas Instruments OPA4137 datasheet
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें