Texas Instruments

PCA9535PWG4 - 16-Bit I/O Expander | Texas Instruments

MPN: PCA9535PWG4 ✓ सक्रिय
5.5 V Vdss 24-TSSOP Package 400 kHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

PCA9535PWG4 अवलोकन

The Texas Instruments PCA9535PWG4 is a 16-bit I/O expander operating through an I2C or SMBus serial interface at up to 400 kHz, housed in a 24-pin TSSOP package. It adds 16 general-purpose input or output lines to a host controller without requiring a parallel GPIO port, making it useful for conserving controller pins in embedded and industrial systems. The device operates from a supply range up to 5.5 V and supports industrial-temperature applications.

An I/O expander is an interface IC that translates a serial bus into additional digital input and output lines. The PCA9535 belongs to the parallel I/O port expander hierarchy within interface ICs, combining I2C control, SMBus compatibility, 16 independently configurable GPIOs, and an interrupt function. Its 400 kHz bus speed supports reliable communication with common embedded hosts while keeping the external wiring organized around a two-wire serial bus plus power and ground.

Each of the 16 ports can operate as an input or output, allowing the PCA9535PWG4 to control loads, read discrete signals, or combine both functions in one device. The serial interface provides a compact way to address and configure the ports from a microcontroller. Its 24-TSSOP package has a stated width of 4.40 mm and uses a gull-wing, surface-mount form factor, making it suitable for compact PCB layouts where a larger parallel-interface package would be inconvenient.

The PCA9535 family is designed for low-power embedded control because the serial interface reduces the number of host-controller connections required for external digital lines. A two-wire serial connection can replace a substantial group of direct host GPIO connections, while the expander still provides individual control of each line. The architecture is appropriate for systems in which the host must monitor switches, operate indicators, control relays, or read status signals distributed across a board.

Typical uses include industrial control modules, sensor-hub boards, programmable logic controllers, power-system monitoring, communication equipment, and compact embedded controllers. It is especially useful when the primary microcontroller has too few spare pins but the PCB can accommodate a small serial interface. Designers should also account for the I2C address configuration pins and the device's interrupt output when planning system startup and signal-change handling.

For PCB implementation, place the device close to the interfaces it serves and route I2C traces away from high-current switching paths. Confirm pull-up resistor values against the bus voltage, capacitance, clock rate, and the electrical characteristics of every connected device. The maximum operating supply is 5.5 V, so logic levels must remain compatible with the 24-TSSOP device and its I2C bus.

This product record combines the exact package and interface characteristics, source-backed pricing, compatible alternatives, and practical integration guidance. It also highlights the difference between electrically similar devices and true drop-in choices, helping engineers evaluate PCB reuse, bus compatibility, device addressing, and supply-temperature requirements before release to production.

के लिए ड्रॉप-इन विकल्प PCA9535PWG4 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PCA9535PWG4 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type.

NXP Semiconductors
Device Type: 16-bit I2C/SMBus GPIO expander with interrupt output
इसके साथ तुलना करें PCA9535PWG4 →

PCA9535PW

✅ ड्रॉप-इन
NXP Semiconductors
📦 24-TSSOP
16-bit I2C/SMBus GPIO expander with interrupt output · 16 ports · I2C and SMBus · 400 kHz · 2.3 V to 5.5 V · 24-TSSOP · 4.40 mm · 0.173 in

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PCA9535PWRG4

✅ ड्रॉप-इन
📦 24-TSSOP
Same PCA9535 16-bit, 400 kHz I2C/SMBus function and 24-TSSOP footprint; ordering suffix and delivery configuration differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PCA9535PW,112

✅ ड्रॉप-इन
📦 24-TSSOP
Same 16-bit I2C expander, 24-TSSOP footprint, and 400 kHz class of serial interface; manufacturer and ordering code differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PCA9555PWG4

✅ ड्रॉप-इन
📦 24-TSSOP
Retains 16 I/O lines and the 24-TSSOP footprint but uses the PCA9555 feature set and register architecture rather than the PCA9535 configuration

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PCA9535ECDTR2G

✅ ड्रॉप-इन
📦 24-TSSOP
Same 16-bit I2C expander function and 24-TSSOP package; ordering code differs and device-specific qualifications require review

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PCA9535PWG4 विशेषताएं

Device Type 16-bit I/O expander
Number of I/O Lines 16 lines
Serial Interface I2C and SMBus
Maximum Serial Bus Frequency 400 kHz
Maximum Supply Voltage 5.5 V
पिन की संख्या 24 pins
पैकेज 24-TSSOP
Package Width 4.40 mm
Terminal Form Gull wing
माउंटिंग प्रकार Surface mount
Package Shape Rectangular
Temperature Grade Industrial
Encapsulation Tube
RoHS स्थिति Yes
Low-Power Operation Low-power I/O expansion
Product Description Parallel I/O port with 16 general-purpose input/output lines

PCA9535PWG4 rectangular पिन कॉन्फ़िगरेशन गाइड

PCA9535PWG4 (rectangular पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

PCA9535PWG4 के लिए rectangular पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PCA9535PWG4.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

PCA9535PWG4 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control Module, Sensor and Alarm Hub, Programmable Logic Controller Interface, Communication Equipment Status Control, LED and Relay Control, Embedded Power Monitoring.

🏭

Industrial Control Module

The PCA9535PWG4 fits industrial control modules that need more discrete inputs and outputs than the host controller can provide directly. Its 16 configurable lines can read switches and interlocks while controlling LEDs, relay drivers, or digital actuator enables, all through one I2C or SMBus connection operating up to 400 kHz. Placing the expander in a 24-TSSOP package preserves PCB area while separating remote I/O from the main controller. The design must account for the 5.5 V maximum device supply, compatible I2C logic levels, pull-up resistors, and the industrial temperature requirement. Interrupt support can also let the controller respond to a changed input rather than continuously polling all 16 ports.

🧩

Sensor and Alarm Hub

The PCA9535PWG4 is useful in sensor and alarm hubs that aggregate multiple digital status signals without consuming every GPIO on a microcontroller. Sixteen inputs can monitor door contacts, tamper sensors, card readers, relay feedback, or equipment-status flags, while remaining ports can drive local indicators. The 400 kHz I2C/SMBus rate provides a compact communication path for regularly reading port state, and the interrupt output supports event-driven monitoring when the host does not need continuous polling. Because the device is specified for an industrial temperature grade, it suits controlled industrial environments. System designers should verify address selection, interrupt polarity, pull-up sizing, and the voltage compatibility of every attached sensor.

🔧

Programmable Logic Controller Interface

The PCA9535PWG4 can extend the available digital interface of a programmable logic controller or compact embedded controller by adding 16 serial-controlled lines. This arrangement is valuable when a controller must operate relays, read discrete switches, or supervise multiple machine inputs while retaining most of its pins for other tasks. The 24-TSSOP package supports conventional surface-mount assembly, and the 16-bit parallel organization maps naturally to banks of sensors or actuators. At a maximum I2C clock frequency of 400 kHz, port updates can be coordinated with other low-speed bus devices. Engineers should place the device near the associated wiring, use appropriate transient protection for long external cables, and confirm that the controller's bus voltage and timing meet the PCA9535 electrical limits.

🌐

Communication Equipment Status Control

The PCA9535PWG4 fits communication equipment that requires distributed front-panel indicators, relay controls, or status inputs beyond the host processor's available pins. Sixteen I/O lines can operate panel LEDs, control equipment-enable signals, or read module-presence and fault indicators through an I2C/SMBus interface. Its 400 kHz bus operation is suitable for low- and moderate-rate management traffic, while the compact 24-TSSOP footprint supports space-constrained line cards. The interrupt function can notify the host of an external status transition and reduce unnecessary polling. Layout should keep the serial bus short, route sensitive communication lines separately, and use pull-up values that support the complete bus capacitance while remaining compatible with the logic voltage and 5.5 V maximum supply.

💡

LED and Relay Control

The PCA9535PWG4 can control grouped LEDs and low-current relay-driver inputs where direct host-controller pins are limited. Ports may be configured as outputs for status lamps, optical-driver enables, or relay logic, while other ports can read returned or acknowledgment signals. The serial architecture allows the host to change several outputs through one bus transaction rather than dedicating one connection per line. The 24-TSSOP package supports dense PCB placement, although external drivers remain necessary when a load exceeds the port's current capability. Designers must confirm output-current limits, total supply-current budget, inductive-load protection, grounding, and logic-level compatibility. The stated 5.5 V maximum supply also requires careful coordination with relay-driver and LED circuitry.

⚡

Embedded Power Monitoring

The PCA9535PWG4 is appropriate for embedded power-monitoring boards that collect discrete enable, fault, presence, and reset signals. Sixteen inputs can monitor several power rails or subsystem states, while configurable outputs can control enable inputs or isolation devices. A 400 kHz I2C or SMBus connection allows a supervisory controller or microcontroller to read the port state efficiently, and interrupt signaling can indicate a transition without continuous polling. The industrial-grade designation supports use in controlled equipment environments. Because the target device has a 5.5 V maximum operating supply, its interface voltage must be reconciled with higher-voltage power-domain signals through suitable level translation or protection. The final design should also validate input thresholds, ground-reference relationships, and fault-state behavior.

अनुशंसित उत्पादों का सारांश

PCA9535PW,112 Cross-brand 16-bit TSSOP I/O expander उपयोग में: Industrial Control Module, Programmable Logic Controller Interface, LED and Relay Control PCA9555PWG4 Texas Instruments 16-bit TSSOP I/O expander उपयोग में: Industrial Control Module, Programmable Logic Controller Interface, Communication Equipment Status Control, Embedded Power Monitoring PCA9535PW NXP Semiconductors उपयोग में: Sensor and Alarm Hub, Communication Equipment Status Control, Embedded Power Monitoring PCA9535ECDTR2G 24-TSSOP PCA9535-family interface option उपयोग में: Sensor and Alarm Hub PCA9535PWRG4 Texas Instruments TSSOP I/O expansion option उपयोग में: LED and Relay Control
What is the PCA9535PWG4?
The PCA9535PWG4 is a 16-bit I2C and SMBus I/O expander that adds 16 configurable digital lines to a host controller through a two-wire serial interface. According to the Texas Instruments datasheet, it supports operation up to 400 kHz and is packaged in a 24-TSSOP device. It is appropriate for expanding control or monitoring capacity when a microcontroller has too few direct GPIO pins.
How many I/O ports does the PCA9535PWG4 provide?
The PCA9535PWG4 provides 16 general-purpose input/output ports. Each port can be configured as an input or output through the serial interface, allowing the same device to read discrete signals and control external loads. The manufacturer describes the part as a parallel I/O port with 16 general-purpose lines, while its host connection remains I2C or SMBus.
What is the maximum I2C clock frequency of PCA9535PWG4?
The maximum I2C clock frequency is 400 kHz. The Texas Instruments product information identifies the PCA9535PWG4 as a 16-bit I2C and SMBus expander with 400 kHz operation. The actual system rate must also remain compatible with every device connected to the shared bus and with the pull-up network on the PCB.
What package does the PCA9535PWG4 use?
The PCA9535PWG4 uses a 24-TSSOP surface-mount package with gull-wing terminals, a rectangular body, and a listed width of 4.40 mm. The listed delivery format is tube. Because the package has 24 terminals, the PCB footprint must match the 24-TSSOP land pattern and provide adequate lead spacing and solder-joint clearance.
Where can I download the PCA9535PWG4 datasheet PDF?
The PCA9535PWG4 datasheet can be obtained from the Texas Instruments product documentation linked on this page. The manufacturer document defines the 16-bit I/O architecture, pin functions, electrical characteristics, and application information. Use the manufacturer PDF for design decisions because third-party copies may omit revision details or render pin tables and diagrams inaccurately.
Where can I find the PCA9535PWG4 pinout?
The PCA9535PWG4 pinout is shown in the pin-configuration diagram and pin-description table of the Texas Instruments datasheet. Use that table when assigning the 24-TSSOP lands, especially for power, ground, I2C, address-selection, and interrupt functions. Do not infer connections from package position alone because the exposed functions are determined by the manufacturer's pin numbering.
Can PCA9535PWG4 replace PCA9535PW?
The PCA9535PW and PCA9535PWG4 are both listed as Texas Instruments 16-bit, 400 kHz I2C and SMBus expanders in 24-TSSOP packages, so their electrical functions and land pattern are closely aligned. The ordering suffix can indicate a different delivery format, with PCA9535PWG4 listed as tube-packed. Confirm the suffix-specific mechanical, marking, and packing details before production substitution.
PCA9535PWG4 vs PCA9555PWG4: which one should I use?
The PCA9535PWG4 and PCA9555PWG4 are both 16-bit Texas Instruments I/O expanders in 24-TSSOP packages, but they are not identical devices. The PCA9555 family is commonly selected when its broader I/O-port feature set is needed, while the PCA9535 provides the established 16-bit expansion function. Compare the complete register maps, electrical limits, address behavior, and interrupt implementation in each manufacturer datasheet.
When should I choose PCA9535PWG4 instead of PCA9535PW,112?
Choose the PCA9535PWG4 when the approved sourcing configuration calls for the Texas Instruments tube-packaged ordering option and the application falls within its industrial temperature grade. The NXP PCA9535PW,112 is an equivalent 16-bit, 24-TSSOP I2C expander for cross-brand sourcing. Final selection should account for manufacturer-specific qualifications, supply conditions, lifecycle commitments, and approved-vendor requirements.
What is the best drop-in replacement for PCA9535PWG4?
The closest drop-in choices are pin-compatible 16-bit, 24-TSSOP I2C expanders such as PCA9535PW from Texas Instruments and PCA9535PW,112 from NXP. Before replacing the PCA9535PWG4, verify the exact pinout, operating voltage, address-selection behavior, interrupt polarity, electrical timing, and temperature range. A matching package alone does not guarantee that all software-visible registers and features are identical.
Is PCA9535PWG4 suitable for industrial control systems?
The PCA9535PWG4 is listed with an industrial temperature grade and is designed for general-purpose parallel I/O expansion, making it suitable for many industrial-control applications. Its 5.5 V maximum supply and 400 kHz serial interface fit industrial embedded designs, but the final qualification also depends on the host voltage, environmental conditions, connected loads, and system-specific reliability requirements.
Where can I buy PCA9535PWG4 online?
Use the Request a Quote form on this page to request PCA9535PWG4 pricing, stock confirmation, lead time, and order handling from XAIPART. The form allows procurement teams to specify the required quantity and packaging without relying on a static listing that may change. For production planning, request written confirmation of lifecycle status and delivery timing before approving the purchase order.
What is the price of PCA9535PWG4?
The current commercial terms for PCA9535PWG4 are obtained through the Request a Quote form on this page. The form is the appropriate channel for confirming the unit price, quantity breaks, currency, stock, and applicable packaging. For engineering comparisons, focus on device function and qualification rather than treating a temporary listing amount as a fixed lifetime procurement price.
What is the lead time and stock status for PCA9535PWG4?
Submit a Request a Quote request for the current lead time, available quantity, minimum order quantity, and stock allocation for PCA9535PWG4. Distributor inventory can change quickly, so a dated inventory indication should not be treated as a production commitment. Ask for written confirmation against the exact manufacturer part number, 24-TSSOP package, and tube delivery requirement.
What can replace PCA9535PWG4?
PCA9535PW and NXP PCA9535PW,112 are the strongest same-footprint replacements identified for the PCA9535PWG4 because each is presented as a 16-bit I2C/SMBus expander in a 24-TSSOP package. Their use still requires a design review of pin assignments, electrical timing, address selection, interrupt behavior, temperature grade, and software register expectations. Use the Request a Quote form to confirm sourcing for the selected alternative.
What are the key specifications of PCA9535PWG4 that engineers should know?
The principal PCA9535PWG4 specifications are 16 configurable I/O lines, I2C and SMBus host connectivity, a 400 kHz maximum bus rate, a 5.5 V maximum supply, and a 24-TSSOP industrial-temperature package. The Texas Instruments product description identifies the part as a low-power parallel I/O port expander. These parameters define its core role as a compact serial-to-parallel GPIO interface.

के लिए इंजीनियरिंग संदर्भ डेटा PCA9535PWG4 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose PCA9535PWG4 when the design needs 16 configurable digital lines, I2C/SMBus control at up to 400 kHz, an industrial-temperature grade, and a 24-TSSOP footprint. PCA9535PW is the closest same-manufacturer choice when a different ordering or delivery suffix is acceptable, while PCA9535PWRG4 provides another ordering configuration for the same core family. PCA9535PW,112 is useful when a qualified NXP source is preferred, subject to a full review of address selection, timing, interrupt behavior, temperature grade, and lifecycle. PCA9555PWG4 retains 16 lines in the same package but changes the feature and register architecture, so choose it only when its expanded I/O behavior is specifically needed. For every alternative, verify the manufacturer datasheet, PCB footprint, software driver expectations, and system qualification before substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद PCA9535PW PCA9535PWRG4 PCA9535PW,112 PCA9555PWG4 PCA9535ECDTR2G
Brand Texas Instruments Texas Instruments Texas Instruments NXP Semiconductors Texas Instruments Texas Instruments
Package 24-TSSOP 24-TSSOP - same 24-TSSOP - same 24-TSSOP - same 24-TSSOP - same 24-TSSOP - same
Device Type 16-bit I/O expander 16-bit I/O expander 16-bit I/O expander 16-bit I/O expander 16-bit I/O expander 16-bit I/O expander
Number of I/O Lines 16 lines 16 lines 16 lines 16 lines 16 lines 16 lines
Serial Interface I2C and SMBus I2C and SMBus I2C and SMBus I2C and SMBus I2C and SMBus I2C and SMBus
Low-Power Operation Yes Yes Yes Yes Yes Yes

मुख्य विशेषताएँ

  • Directly matches the principal PCA9535 interface characteristics (बनामPCA9535PW,112)
  • Maintains the 16-bit PCA9535 function in the same 24-TSSOP footprint (बनामPCA9555PWG4)
  • Uses the same core 16-bit, 400 kHz expansion function (बनामPCA9535ECDTR2G)

डिज़ाइन नोट्स

Route the I2C clock and data traces as a short, matched pair and place the pull-up resistors near the device or bus master according to the complete bus topology. Keep switching-converter paths, motor outputs, and high-current LED drivers away from the serial interface. The PCA9535PWG4 supports up to 400 kHz, but practical layout must also preserve signal integrity across the full bus length and number of connected devices.

Validate every port state before connecting external circuitry because an I/O expander is powered from a constrained 5.5 V maximum device supply. Confirm the host's I2C logic voltage, pull-up voltage, output-current limits, and ground reference before connection. If controlled loads can back-feed an unpowered expander, use suitable isolation or ensure that all rails and pull-ups obey the manufacturer's sequencing requirements.

Do not treat a matching 24-TSSOP footprint as proof that every alternative has identical software behavior. Review address-selection pins, configuration registers, interrupt polarity, electrical timing, temperature range, and absolute maximum ratings for each candidate. A PCA9555-family device retains the 16-bit expansion concept but uses a different feature set and register architecture, so existing firmware may require modification.

Choose pull-up values from the bus capacitance and voltage rather than using a fixed value across every design. Check the rise time against the 400 kHz operating limit and ensure the pull-up does not exceed the sink-current capability of the host or expander. When the bus includes multiple PCA9535 devices, document each address configuration and avoid duplicate addresses on the same controller segment.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The product listing identifies RoHS status as Yes. No separate REACH, halogen-free, conflict-minerals, or automotive qualification information was identified.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

PCA9535PWG4 PCA9535PWG4 datasheet PCA9535PWG4 datasheet pdf PCA9535PWG4 pinout PCA9535PWG4 equivalent PCA9535PWG4 replacement PCA9535PWG4 cross reference PCA9535PWG4 vs PCA9555PWG4 PCA9535PWG4 footprint PCA9535PWG4 application circuit Texas Instruments PCA9535PWG4 PCA9535PWG4 24-TSSOP PCA9535PWG4 16-bit I/O expander PCA9535PWG4 price PCA9535PWG4 stock

संबंधित कंपोनेंट्स और शब्द

Texas Instruments PCA9535PWG4 PCA9535PW PCA9535PWRG4 PCA9535PW,112 PCA9555PWG4 PCA9535ECDTR2G NXP Semiconductors I/O expander parallel I/O port general-purpose input/output GPIO I2C SMBus interface IC semiconductor low-power I/O expansion 24-TSSOP TSSOP family gull-wing package surface-mount technology industrial temperature grade RoHS 400 kHz serial bus 5.5 V maximum supply
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें