PCM1728E/2K 24-Bit 96kHz Stereo I2S DAC | Texas Instruments
MPN: PCM1728E/2K ✗ जीवन की समाप्तिPCM1728E/2K अवलोकन
A stereo DAC is a digital-to-analog converter that accepts digital audio samples and produces left- and right-channel analog signals. The PCM1728E/2K belongs to the broader ADC/DAC and audio interface IC hierarchy, combining a digital audio interface with two analog output channels. Its 24-bit resolution supports high-fidelity audio data formats, while the 96kHz sampling capability provides sufficient bandwidth for CD-quality and other high-rate digital audio streams.
The PCM1728E/2K uses an I2S serial interface for receiving digital audio data. This interface is widely used in audio processors, receivers, CD/DVD systems, digital mixing equipment, and other embedded audio platforms. The device is implemented in CMOS and is identified in the product documentation as a 24-bit, 96kHz sampling delta-sigma stereo DAC. The package is the TI 28-pin SSOP DB configuration.
The /2K ordering suffix identifies the particular TI orderable package variant. The PCM1728E family is listed by TI as a 106dB SNR stereo DAC with 28 pins in the SSOP DB package. The PCM1728E/2K listing identifies the part as a 24-bit, 96kHz I2S stereo DAC in a 28-SSOP package.
Typical applications include CD/DVD player audio outputs, digital audio receivers, home theater and multimedia equipment, communications terminals, and embedded audio subsystems. Because the converter is a stereo DAC, system designers must provide compatible digital audio timing and data signals and must implement the required analog output and power-supply arrangements described in the manufacturer datasheet.
When laying out a circuit around the PCM1728E/2K, keep digital and analog routing separated, place bypass and decoupling capacitors close to the relevant supply pins, and preserve the package-specific exposed-pin and thermal-land requirements shown in the TI package documentation. Because the exact pin names, voltage ratings, output architecture, and application circuit values are not reproduced in the available product excerpts, use the manufacturer datasheet and package drawing when assigning PCB nets and component values.
This product summary combines the manufacturer product listing, distributor catalog information, and the PCM1728E family identity to help engineers identify the correct stereo DAC and verify package, resolution, sampling-rate, and interface requirements before layout or procurement.
के लिए ड्रॉप-इन विकल्प PCM1728E/2K — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PCM1728E/2K (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package.
PCM1728E
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →PCM1728E/2K Maximum Ratings और Electrical Characteristics
| Product Type | Stereo audio digital-to-analog converter |
| Manufacturer | Texas Instruments |
| रेज़ोल्यूशन | 24 bit |
| सैंपलिंग रेट | 96 kHz |
| Digital Audio Interface | I2S |
| Architecture | CMOS delta-sigma |
| Channel Count | 2 channels |
| Signal-to-Noise Ratio | 106 dB |
| पैकेज | 28-pin SSOP (DB) |
| माउंटिंग प्रकार | Surface mount |
| Digital Input Format | I2S |
| AEC-Q100 Qualification | Not applicable |
PCM1728E/2K 28-pin ssop (db) पिन कॉन्फ़िगरेशन गाइड
PCM1728E/2K (28-pin ssop (db) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PCM1728E/2K.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
PCM1728E/2K के लिए उपयुक्त है 6 अनुप्रयोगs: CD and DVD Player Audio Output, Digital Audio Receiver, Home Theater and Multimedia System, Communications Terminal Audio, Embedded Audio Processor Subsystem, Digital Mixing and Audio Expansion.
CD and DVD Player Audio Output
The PCM1728E/2K fits a two-channel digital audio output stage because it accepts 24-bit I2S data and supports sampling rates up to 96kHz. Its stereo delta-sigma DAC architecture provides a straightforward path from a digital audio decoder to left- and right-channel analog outputs. The 28-pin SSOP DB package supports compact consumer-electronics layouts, provided the board follows the manufacturer reference circuit. Designers should preserve clean grounds, provide the required clocking, and use the recommended output and bypass networks. The family-level 106dB SNR figure also provides a useful selection criterion for high-fidelity playback equipment.
अनुशंसित
Digital Audio Receiver
PCM1728E/2K is appropriate for digital audio receivers that need stereo analog outputs from an I2S-format source. Its 24-bit resolution and 96kHz sampling capability align with conventional high-quality digital audio streams, while the two-channel architecture matches left and right receiver channels. The converter should sit close to the audio output stage, with digital routing separated from sensitive analog traces. Check the datasheet for required master-clock relationships, supply sequencing, and analog output loading before finalizing the receiver schematic and PCB.
अनुशंसित
Home Theater and Multimedia System
The PCM1728E/2K can serve as the stereo audio DAC in home-theater front-panel, amplifier, or multimedia designs driven by an I2S-capable decoder. Its 96kHz maximum sampling rate supports high-rate source material, while 24-bit processing provides suitable resolution for consumer and prosum audio. The SSOP-28 footprint allows placement near the output connectors and analog network. Because audio quality also depends on grounding and power cleanliness, use short analog paths, stable reference connections, and the decoupling arrangement specified by TI.
अनुशंसित
Communications Terminal Audio
PCM1728E/2K is suitable for communications terminals requiring a compact stereo audio output from a digital speech or multimedia codec. The I2S interface enables integration with common audio processors, and the converter supplies separate left and right analog outputs for line-level downstream amplification. The 24-bit and 96kHz capabilities are useful for multimedia terminals carrying both speech and higher-rate audio. Confirm codec clock polarity, slave or master operation, input latency, and supported audio rate through the full system timing specification.
अनुशंसित
Embedded Audio Processor Subsystem
PCM1728E/2K can be paired with an embedded audio processor or DSP that outputs standard I2S data. The converter provides a dedicated analog stage without requiring the host processor to drive external analog circuitry directly. Its 28-pin SSOP package is manageable on multilayer boards, but careful partitioning is needed to prevent digital switching energy from coupling into the stereo outputs. Use continuous ground planes, short output paths, and the recommended capacitor placement at the converter pins. System validation should cover supported sample rates and clock ratios.
अनुशंसित
Digital Mixing and Audio Expansion
The PCM1728E/2K can add a stereo I2S-to-analog output channel to digital mixing equipment, active speakers, and professional audio interface modules. Its 24-bit format supports high-resolution internal audio paths, and the 96kHz capability accommodates multirate systems when the upstream mixer supports the corresponding rate. The converter must share a compatible clock domain with the digital source, so clock routing and rate conversion need careful review. The 106dB family SNR specification provides a useful benchmark for evaluating analog performance in multi-channel equipment.
अनुशंसित
के लिए इंजीनियरिंग संदर्भ डेटा PCM1728E/2K — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | PCM1728E |
|---|---|---|
| Product Type | Stereo audio DAC | Stereo audio DAC |
| Brand | Texas Instruments | Texas Instruments |
| Package | SSOP-28 (DB) | SSOP-28 (DB) |
| Resolution | 24 bit | 24 bit |
| Sampling Rate | 96 kHz | 96 kHz |
| Digital Interface | I2S | I2S |
| Channel Count | 2 channels | 2 channels |
| Signal-to-Noise Ratio | 106 dB | 106 dB |
| Architecture | CMOS delta-sigma | CMOS delta-sigma |
मुख्य विशेषताएँ
- Documented family-level signal-to-noise ratio (बनामPCM1728E)
- Exact high-resolution stereo conversion capability (बनामPCM1728E)
- Established 28-pin SSOP DB implementation (बनामPCM1728E)
डिज़ाइन नोट्स
Keep the I2S data, clock, and control traces on the digital side of the layout, and route analog outputs directly toward the output network without crossing high-current switching paths. Place bypass capacitors at the pins identified in the manufacturer application circuit and maintain an uninterrupted ground plane under the SSOP footprint. This separation reduces digital-to-analog coupling in a converter whose family-level SNR is specified at 106dB.
Verify the complete audio clock chain, including source mode, master-clock ratio, bit alignment, and sample rate. The I2S label alone does not establish compatibility with every digital source. Use the PCM1728E timing diagrams to set data latency and signal polarity correctly, and avoid substituting a generic I2S component without reviewing its clock requirements and supported sampling rate.
Do not treat every PCM1728E suffix as automatically interchangeable with PCM1728E/2K. Confirm package, ordering suffix, environmental grade, and lifecycle status in the TI ordering information before release. Also confirm that the obsolete-status designation for the /2K variant does not unintentionally remove electrical changes needed by an existing design.
Use the TI DB-package land pattern and account for the 0.63mm pin pitch when defining solder-mask and copper features. Check courtyard and assembly-rule constraints because the SSOP leads are closely spaced. Place analog output components on the connector side of the converter and digital components on the opposite side to make signal-flow direction unambiguous and reduce crosstalk.
अनुपालन जानकारी
The available catalog excerpts do not state the required compliance status for the exact PCM1728E/2K orderable variant. AEC-Q100 is not applicable because this is an audio converter rather than an automotive-qualified device.